RESUMEN
We constructed a photoanode comprising the homogeneous water oxidation catalyst (WOC) Na8K8[Co9(H2O)6(OH)3(HPO4)2(PW9O34)3] (Co9POM) and nanoporous n-type TiO2 photoelectrodes (henceforth "TiO2-Co9POM") by first anchoring the cationic 3-aminopropyltrimethoxysilane (APS) ligand on a metal oxide light absorber, followed by treatment of the metal oxide-APS with a solution of the polyoxometalate WOC. The resulting TiO2-Co9POM photoelectrode exhibits a 3-fold oxygen evolution photocurrent enhancement compared to bare TiO2 in aqueous acidic conditions. Three-element (Co 2p, W 4f, and O 1s) X-ray photoelectron spectroscopy and Raman spectroscopy studies before and after use indicate that surface-bound Co9POM retains its structural integrity throughout all photoelectrochemical water oxidation studies reported here. Extensive charge-transfer mechanistic studies by photoelectrochemical techniques and transient absorption spectroscopy elucidate that Co9POM serves as an efficient WOC, extracting photogenerated holes from TiO2 on the picosecond time scale. This is the first comprehensive mechanistic investigation elucidating the roles of polyoxometalates in POM-photoelectrode hybrid oxygen evolution reaction systems.
RESUMEN
Water oxidation is a bottleneck reaction for the establishment of solar-to-fuel energy conversion systems. Earth-abundant metal-based polyoxometalates are promising heterogeneous water oxidation catalysts that can operate in a wide pH range. However, detailed structure-reactivity relationships are not yet comprehensively understood, hampering the design and synthesis of more effective polyoxometalate-based oxidation catalysts. Here we report the synthesis of an ordered, mixed-metal cobalt-iron Weakley archetype [CoII2(H2O)2FeIII2(CoIIW9O34)2]14- (Co2Fe2-WS), which unexpectedly highlights the strong influence of the central, coordinatively saturated metal ions on the catalytic water oxidation characteristics. The resulting species exhibits catalytic turnover frequencies which are up to 4× higher than those of the corresponding archetype tetracobalt-oxo species [CoII2(H2O)2CoII2(PW9O34)2]10- (Co4-WS). It is further striking that the system becomes catalytically inactive when one of the central positions is occupied by a WVI ion as demonstrated by [CoII2(H2O)2CoIIWVI(CoIIW9O34)2]12- (Co3W-WS). Importantly, this study demonstrates that coordinatively saturated metal ions in this central position, which at first glance appear insignificant, do not solely have a structural role but also impart a distinctive structural influence on the reactivity of the polyoxometalate. These results provide unique insights into the structure-reactivity relationships of polyoxometalates with improved catalytic performance characteristics.
RESUMEN
A recent report established that the tetrabutylammonium (TBA) salt of hexavanadopolymolybdate TBA4H5[PMo6V6O40] (PV6Mo6) serves as the redox buffer with Cu(II) as a co-catalyst for aerobic deodorization of thiols in acetonitrile. Here, we document the profound impact of vanadium atom number (x = 0-4 and 6) in TBA salts of PVxMo12-xO40(3+x)- (PVMo) on this multicomponent catalytic system. The PVMo cyclic voltammetric peaks from 0 to -2000 mV vs Fc/Fc+ under catalytic conditions (acetonitrile, ambient T) are assigned and clarify that the redox buffering capability of the PVMo/Cu catalytic system derives from the number of steps, the number of electrons transferred each step, and the potential ranges of each step. All PVMo are reduced by varying numbers of electrons, from 1 to 6, in different reaction conditions. Significantly, PVMo with x ≤ 3 not only has much lower activity than when x > 3 (for example, the turnover frequencies (TOF) of PV3Mo9 and PV4Mo8 are 8.9 and 48 s-1, respectively) but also, unlike the latter, cannot maintain steady reduction states when the Mo atoms in these polyoxometalate (POMs) are also reduced. Stopped-flow kinetics measurements reveal that Mo atoms in Keggin PVMo exhibit much slower electron transfer rates than V atoms. There are two kinetic arguments: (a) In acetonitrile, the first formal potential of PMo12 is more positive than that of PVMo11 (-236 and -405 mV vs Fc/Fc+); however, the initial reduction rates are 1.06 × 10-4 s-1 and 0.036 s-1 for PMo12 and PVMo11, respectively. (b) In aqueous sulfate buffer (pH = 2), a two-step kinetics is observed for PVMo11 and PV2Mo10, where the first and second steps are assigned to reduction of the V and Mo centers, respectively. Since fast and reversible electron transfers are key for the redox buffering behavior, the slower electron transfer kinetics of Mo preclude these centers functioning in redox buffering that maintains the solution potential. We conclude that PVMo with more vanadium atoms allows the POM to undergo more and faster redox changes, which enables the POM to function as a redox buffer dictating far higher catalytic activity.
RESUMEN
The control of the solution electrochemical potential as well as pH impacts products in redox reactions, but the former gets far less attention. Redox buffers facilitate the maintenance of potentials and have been noted in diverse cases, but they have not been a component of catalytic systems. We report a catalytic system that contains its own built-in redox buffer. Two highly synergistic components (a) the tetrabutylammonium salt of hexavanadopolymolybdate TBA4H5[PMo6V6O40] (PV6Mo6) and (b) Cu(ClO4)2 in acetonitrile catalyze the aerobic oxidative deodorization of thiols by conversion to the corresponding nonodorous disulfides at 23 °C (each catalyst alone is far less active). For example, the reaction of 2-mercaptoethanol with ambient air gives a turnover number (TON) = 3 × 102 in less than one hour with a turnover frequency (TOF) of 6 × 10-2 s-1 with respect to PV6Mo6. Multiple electrochemical, spectroscopic, and other methods establish that (1) PV6Mo6, a multistep and multielectron redox buffering catalyst, controls the speciation and the ratio of Cu(II)/Cu(I) complexes and thus keeps the solution potential in different narrow ranges by involving multiple POM redox couples and simultaneously functions as an oxidation catalyst that receives electrons from the substrate; (2) Cu catalyzes two processes simultaneously, oxidation of the RSH by PV6Mo6 and reoxidation of reduced PV6Mo6 by O2; and (3) the analogous polytungstate-based system, TBA4H5[PW6V6O40] (PV6W6), has nearly identical cyclic voltammograms (CV) as PV6Mo6 but has almost no catalytic activity: it does not exhibit self-redox buffering.
RESUMEN
Photoelectrochemical solar fuel generation at the semiconductor/liquid interface consists of multiple elementary steps, including charge separation, recombination, and catalytic reactions. While the overall incident light-to-current conversion efficiency (IPCE) can be readily measured, identifying the microscopic efficiency loss processes remains difficult. Here, we report simultaneous in situ transient photocurrent and transient reflectance spectroscopy (TRS) measurements of titanium dioxide-protected gallium phosphide photocathodes for water reduction in photoelectrochemical cells. Transient reflectance spectroscopy enables the direct probe of the separated charge carriers responsible for water reduction to follow their kinetics. Comparison with transient photocurrent measurement allows the direct probe of the initial charge separation quantum efficiency (ÏCS) and provides support for a transient photocurrent model that divides IPCE into the product of quantum efficiencies of light absorption (Ïabs), charge separation (ÏCS), and photoreduction (Ïred), i.e., IPCE = ÏabsÏCSÏred. Our study shows that there are two general key loss pathways: recombination within the bulk GaP that reduces ÏCS and interfacial recombination at the junction that decreases Ïred. Although both loss pathways can be reduced at a more negative applied bias, for GaP/TiO2, the initial charge separation loss is the key efficiency limiting factor. Our combined transient reflectance and photocurrent study provides a time-resolved view of microscopic steps involved in the overall light-to-current conversion process and provides detailed insights into the main loss pathways of the photoelectrochemical system.
RESUMEN
Protection from and removal of chemical warfare agents (CWAs) from the environment remains a global goal. Activated charcoal, metal oxides, metal organic frameworks (MOFs), polyoxometalates (POMs) and reactive polymers have all been investigated for CWA removal. Composite polymeric materials are rapidly gaining traction as versatile building blocks for personal protective equipment (PPE) and catalytic devices. Polymers are inexpensive to produce and easily engineered into a wide range of materials including films, electro-spun fibers, mixed-matrix membranes/reactors, and other forms. When containing reactive side-chains, hydrolysis catalysts, and/or oxidative catalysts polymeric devices are primed for CWA decontamination. In this review, recent advances in reactive polymeric materials for CWA removal are summarized. To aid in comparing the effectiveness of the different solid catalysts, particular attention is paid to the stoichiometric ratio of reactive species to toxic substrate (CWA or CWA simulant).
Asunto(s)
Sustancias para la Guerra Química , Estructuras Metalorgánicas , Sustancias para la Guerra Química/toxicidad , Polímeros , Carbón Orgánico , ÓxidosRESUMEN
Mixed 3d metal oxides are some of the most promising water oxidation catalysts (WOCs), but it is very difficult to know the locations and percent occupancies of different 3d metals in these heterogeneous catalysts. Without such information, it is hard to quantify catalysis, stability, and other properties of the WOC as a function of the catalyst active site structure. This study combines the site selective synthesis of a homogeneous WOC with two adjacent 3d metals, [Co2Ni2(PW9O34)2]10- (Co2Ni2P2) as a tractable molecular model for CoNi oxide, with the use of multiwavelength synchrotron X-radiation anomalous dispersion scattering (synchrotron XRAS) that quantifies both the location and percent occupancy of Co (â¼97% outer-central-belt positions only) and Ni (â¼97% inner-central-belt positions only) in Co2Ni2P2. This mixed-3d-metal complex catalyzes water oxidation an order of magnitude faster than its isostructural analogue, [Co4(PW9O34)2]10- (Co4P2). Four independent and complementary lines of evidence confirm that Co2Ni2P2 and Co4P2 are the principal WOCs and that Co2+(aq) is not. Density functional theory (DFT) studies revealed that Co4P2 and Co2Ni2P2 have similar frontier orbitals, while stopped-flow kinetic studies and DFT calculations indicate that water oxidation by both complexes follows analogous multistep mechanisms, including likely Co-OOH formation, with the energetics of most steps being lower for Co2Ni2P2 than for Co4P2. Synchrotron XRAS should be generally applicable to active-site-structure-reactivity studies of multi-metal heterogeneous and homogeneous catalysts.
RESUMEN
Materials that both sequester chemical warfare agents (CWAs) and then catalytically decontaminate the entrapped CWAs are highly sought. This article reports such a system for air-based catalytic removal of the sulfur mustard (HD) simulant, 2-chloroethyl ethyl sulfide (CEES). Hypercrosslinked polymers (HCPs) sequester CEES, and an HCP-embedded oxidation system comprising tribromide, nitrate, and acid (NOxBrxH+) simultaneously catalyzes the aerobic and selective, oxidative conversion of the entrapped CEES to the desired far less-toxic sulfoxide under ambient conditions (air and temperature). (NOxBrxH+) has been incorporated into three HCPs, a fluorobenzene HCP (HCP-F), a methylated HCP (HCP-M), and an HCP with acidic moieties (HCP-A). HCP-A acts as both an absorbing material and a catalytic component due to its acidic side chains. All three HCP/NOxBrxH+ systems work rapidly under these optimally mild conditions. No light or added oxidants are required. The HCP/NOxBrxH+ systems are recyclable.
RESUMEN
Nanoscale oxide layer protected semiconductor photoelectrodes show enhanced stability and performance for solar fuels generation, although the mechanism for the performance enhancement remains unclear due to a lack of understanding of the microscopic interfacial field and its effects. Here, we directly probe the interfacial fields at p-GaP electrodes protected by n-TiO2 and its effect on charge carriers by transient reflectance spectroscopy. Increasing the TiO2 layer thickness from 0 to 35 nm increases the field in the GaP depletion region, enhancing the rate and efficiency of interfacial electron transfer from the GaP to TiO2 on the ps time scale as well as retarding interfacial recombination on the microsecond time scale. This study demonstrates a general method for providing a microscopic view of the photogenerated charge carrier's pathway and loss mechanisms from the bulk of the electrode to the long-lived separated charge at the interface that ultimately drives the photoelectrochemical reactions.
Asunto(s)
Óxidos , Titanio , Electrodos , Luz SolarRESUMEN
Bis(2-chloroethyl) sulfide or sulfur mustard (HD) is one of the highest-tonnage chemical warfare agents and one that is highly persistent in the environment. For decontamination, selective oxidation of HD to the substantially less toxic sulfoxide is crucial. We report here a solvent-free, solid, robust catalyst comprising hydrophobic salts of tribromide and nitrate, copper(II) nitrate hydrate, and a solid acid (NafionTM) for selective sulfoxidation using only ambient air at room temperature. This system rapidly removes HD as a neat liquid or a vapor. The mechanisms of these aerobic decontamination reactions are complex, and studies confirm reversible formation of a key intermediate, the bromosulfonium ion, and the role of Cu(II). The latter increases the rate four-fold by increasing the equilibrium concentration of bromosulfonium during turnover. Cu(II) also provides a colorimetric detection capability. Without HD, the solid is green, and with HD, it is brown. Bromine K-edge XANES and EXAFS studies confirm regeneration of tribromide under catalytic conditions. Diffuse reflectance infrared Fourier transform spectroscopy shows absorption of HD vapor and selective conversion to the desired sulfoxide, HDO, at the gas-solid interface.
RESUMEN
The counterions of polyoxometalates (POMs) impact properties and applications of this growing class of inorganic clusters. Here, we used density functional theory (DFT) to elucidate the impact of fully hydrated alkali metal cations on the geometry, electronic structure, and chemical properties of the polyoxotungstate anion [PW12O40]3-. The calculations show that the HOMO of the free anion [PW12O40]3- is a linear combination of the 2p AOs of the bridging oxygens, and the first few LUMOs are the 5d orbitals of the tungsten atoms. The S0â S1 electron excitation, near 3 eV, is associated with the O(2p) â W(5d) transition. Anion/cation complexation leads to formation of [PW12O40]3-[M+(H2O)16]3 ion-pair complexes, where with the increase of atomic number of M, the M+(H2O)16 cluster releases several water molecules and interacts strongly with the polyoxometalate anion. For M = Li, Na and K, [PW12O40]3-[M+(H2O)16]3 is characterized as a "hydrated" ion-pair complex. However, for M = Rb and Cs, it is a "contact" ion-pair complex, where the strong anion-cation interaction makes it a better electron acceptor than the "hydrated" ion-pair complexes. Remarkably, the electronic excitations in the visible part of the absorption spectrum of these complexes are predominantly solvent-to-POM charge transfer transitions (i.e. intermolecular CT). The ratio of the number of intermolecular charge transfer transitions to the number of O(2p)-to-W(5d) valence (i.e. intramolecular) transitions increases with the increasing atomic number of the alkali metals.
RESUMEN
The threat of chemical warfare agents (CWAs), assured by their ease of synthesis and effectiveness as a terrorizing weapon, will persist long after the once-tremendous stockpiles in the U.S. and elsewhere are finally destroyed. As such, soldier and civilian protection, battlefield decontamination, and environmental remediation from CWAs remain top national security priorities. New chemical approaches for the fast and complete destruction of CWAs have been an active field of research for many decades, and new technologies have generated immense interest. In particular, our research team and others have shown metal-organic frameworks (MOFs) and polyoxometalates (POMs) to be active for sequestering CWAs and even catalyzing the rapid hydrolysis of agents. In this Forum Article, we highlight recent advancements made in the understanding and evaluation of POMs and Zr-based MOFs as CWA decontamination materials. Specifically, our aim is to bridge the gap between controlled, solution-phase laboratory studies and real-world or battlefield-like conditions by examining agent-material interactions at the gas-solid interface utilizing a multimodal experimental and computational approach. Herein, we report our progress in addressing the following research goals: (1) elucidating molecular-level mechanisms of the adsorption, diffusion, and reaction of CWA and CWA simulants within a series of Zr-based MOFs, such as UiO-66, MOF-808, and NU-1000, and POMs, including Cs8Nb6O19 and (Et2NH2)8[(α-PW11O39Zr(µ-OH)(H2O))2]·7H2O, (2) probing the effects that common ambient gases, such as CO2, SO2, and NO2, have on the efficacy of the MOF and POM materials for CWA destruction, and (3) using CWA simulant results to develop hypotheses for live agent chemistry. Key hypotheses are then tested with targeted live agent studies. Overall, our collaborative effort has provided insight into the fundamental aspects of agent-material interactions and revealed strategies for new catalyst development.
RESUMEN
This Review summarizes the recent progress made in the field of chemical threat reduction by utilizing new in situ analytical techniques and combinations thereof to study multifunctional materials designed for capture and decomposition of nerve gases and their simulants. The emphasis is on the use of in situ experiments that simulate realistic operating conditions (solid-gas interface, ambient pressures and temperatures, time-resolved measurements) and advanced synchrotron methods, such as in situ X-ray absorption and scattering methods, a combination thereof with other complementary measurements (e.g., XPS, Raman, DRIFTS, NMR), and theoretical modeling. The examples presented in this Review range from studies of the adsorption and decomposition of nerve agents and their simulants on Zr-based metal organic frameworks to Nb and Zr-based polyoxometalates and metal (hydro)oxide materials. The approaches employed in these studies ultimately demonstrate how advanced synchrotron-based in situ X-ray absorption spectroscopy and diffraction can be exploited to develop an atomic- level understanding of interfacial binding and reaction of chemical warfare agents, which impacts the development of novel filtration media and other protective materials.
RESUMEN
Peroxidation of glycerol has been carried out in a polyoxometalate (POM)-based microfluidic reactor, which was fabricated on a capillary by using a layer-by-layer strategy. Lactic acid (LA) is produced selectively in high yield with a TOF as high as 20 000â h-1 , compared to a TOF of 200â h-1 in batch mode. This POM microfluidic reactor is readily prepared, scalable, highly stable, reusable, and also potentially applicable to selective oxidation of other bio-wastes.
RESUMEN
In this work, we use wavefunction engineering by varying the size of Quantum Dots (QDs) and tuning the delocalization (or diffuseness) of frontier orbitals of an acceptor molecule to modulate charge transfer dynamics at the QD/molecule interface. For this purpose, we apply our recently developed bulk-adjusted linear combination of atomic orbitals (BA-LCAO) approach for nanostructures and a density functional theory (DFT) for the acceptor molecules. These electronic structure calculations, combined with extensive molecular dynamics simulations using a fragmented molecular mechanics (FraMM) force field, reveal intimate details of charge transfer across the QD/Acceptor interface. For the spherical wurtzite-(CdSe)201 and (CdSe)693 nanostructures, as model QDs with respective 2.8 and 4.1 nm diameters, and anthraquinone-2,3-dicarboxylic acid and its derivatives with the 7-OH, 7-OF, 10-BH, and 10-CH2 substituents, as model molecular acceptors, we find that (1) both the electron donating and withdrawing groups greatly enhance hole transfer by means of diffusing the acceptor HOMO; (2) electron transfer is affected only by the electron donating groups; (3) solvent effects are largely negligible for the orbital overlaps, and (4) consistent with spatial confinement theories, the electron density of the smaller QD penetrates farther into the vacuum than the corresponding density of the larger QD leading to stronger coupling with the acceptor. These findings suggest that (a) one can effectively control charge transfer across the QD/molecule interface by either changing the size of the QD or by tuning diffuseness of frontier orbitals of the acceptor molecule and (b) the combination of the recently developed BA-LCAO approach for QDs with a DFT for the acceptor molecules, facilitated by the use of the FraMM force field and extensive molecular dynamics simulations, provide qualitatively accurate description of charge transfer dynamics at the QD/acceptor interface.
RESUMEN
Development of technologies for protection against chemical warfare agents (CWAs) is critically important. Recently, polyoxometalates have attracted attention as potential catalysts for nerve-agent decomposition. Improvement of their effectiveness in real operating conditions requires an atomic-level understanding of CWA decomposition at the gas-solid interface. We investigated decomposition of the nerve agent Sarin and its simulant, dimethyl chlorophosphate (DMCP), by zirconium polytungstate. Using a multimodal approach, we showed that upon DMCP and Sarin exposure the dimeric tungstate undergoes monomerization, making coordinatively unsaturated Zr(IV) centers available, which activate nucleophilic hydrolysis. Further, DMCP is shown to be a good model system of reduced toxicity for studies of CWA deactivation at the gas-solid interface.
RESUMEN
We describe a bulk adjusted linear combination of atomic orbitals (BA-LCAO) approach for nanoparticles. In this method, we apply a many-body scaling function (in similar manner as in the environment-modified total energy based tight-binding method) to the DFT-derived diatomic AO interaction potentials (like in the conventional orbital-based density-functional tight binding approach) strictly according to atomic valences acquired naturally in a bulk structure. This modification, (a) facilitates all atom orbital-based electronic structure calculations of charge carrier dynamics in nanoscale structures with a molecular acceptor, and (b) allows to closely match high-level density functional calculation data (previously adjusted to the available experimental findings) for bulk structures. To advance practical application of the BA-LCAO approach we parameterize the Hamiltonian of wurtzite CdSe by fitting its band structure to a high-level DFT reference, corrected for experimentally measured band edges. Here, unlike in conventional DFTB approach, we: (1) use hydrogen-like AOs for the basis as exact atomic eigenfunctions, while orbital energies of which are taken from experimentally measured ionization potentials, and (2) parameterize the many-body scaling functions rather than the atomic wavefunctions. Development of this approach and parameters is guided by our goals to devise a method capable of simultaneously treating the problems of (i) interfacial electron/hole transfer between finite, variable size nanoparticles and electron scavenging molecules, and (ii) high-energy electronic transitions (Auger transitions) that mediate multi-exciton decay in quantum dots. Electronic structure results are described for CdSe quantum dots of various sizes. © 2018 Wiley Periodicals, Inc.
RESUMEN
Polyoxometalate (POM)-based materials of current interest are summarized, and specific types of POM-containing systems are described in which material facilitates multiple complex interactions or catalytic processes. We specifically highlight POM-containing multi-hydrogen-bonding polymers that form gels upon exposure to select organic liquids and simultaneously catalyze hydrolytic or oxidative decontamination, as well as water oxidation catalysts (WOCs) that can be interfaced with light-absorbing photoelectrode materials for photoelectrocatalytic water splitting.
RESUMEN
The generation of five types of Ln(III)-containing tungstotellurates(VI), dimeric (DMAH)12Na2[H10(WO2){Ln(H2O)5(TeW18O65)}2]· nH2O (abbreviated as {Ln2Te2W37}; Ln = Eu, Gd, or Tb; DMAH = dimethylammonium), tetrameric (DMAH)21Na7[H16{Ln(H2O)5(TeW18O64)}4]· nH2O (abbreviated as {Ln4Te4W72}, Ln = Eu or Gd), 2:2 dimeric (DMAH)12[H6{Tb(H2O)3(TeW17O61)}2]·25H2O (abbreviated as {Tb2Te2W34}), 1:1 monosubstituted (DMAH)7Na2[H2Tb(H2O)4(TeW17O61)]·21H2O (abbreviated as {TbTeW17}), and three-dimensional polymer (DMAH)2[HTb(H2O)4{TeW6O24}]·14H2O (abbreviated as {TbTeW6} n), provides insight into the rich condensation chemistry of lacunary and other Dawson-type polyoxometalates. The pH and the type of Ln3+ source both dictate which of these new complexes form. To our knowledge, {Ln4Te4W72} is the highest-nuclearity tungstotellurate to date, and {Tb2Te2W34} and {TbTeW17} contain the first lacunary {TeW17O61}. Electrospray ionization mass spectra analyses indicate that the Dawson-like building blocks, {TeW18O65} and {TeW17O61}, found in solid structures are also present in solution. The intense photoluminescence (characteristic green emission) of {TbTeW6} n, 100× greater than those of {Tb2Te2W37}, {Tb2Te2W34}, and {TbTeW17}, is explained by analysis of all 4 X-ray structures and multiple structure-intensity correlations.