Proprotein Convertase Subtilisin/Kexin Type 9 Inhibitor Improves the Vascular Function of Arteriovenous Fistula in Rats with Hyperglycemia.

Objectives: Few evidence-based medications to improve the primary patency of arteriovenous fistulas in patients with diabetes who require hemodialysis are available. We investigated whether proprotein convertase subtilisin/kexin type 9 inhibitors (PCSK9i) could improve arteriovenous fistula function through pleiotropic effects in a rat model of hyperglycemia. Methods: Ex vivo effects of PCSK9i on the aorta of Sprague-Dawley (SD) rats were investigated using an organ bath system. For in vivo experiments, an abdominal aortocaval (AC) fistula was generated in SD rats (200-250 g) after inducing hyperglycemia through streptozotocin administration (80 mg/kg, intraperitoneal). Alirocumab (50 mg/kg/week, subcutaneous) was administered on the day of fistula surgery and day 7. Echocardiography, blood flow through the aorta-limb, vasomotor reactivity, and serum biochemistry were examined on D14. Furthermore, enzyme-linked immunosorbent assay and immunoblotting were performed. Results: PCSK9i induced aorta relaxation ex vivo through a potassium channel-associated mechanism. PCSK9i significantly improved blood flow and preserved endothelial function without changes in cardiac function and serum lipid levels in rats with hyperglycemia. The levels of lectin-like oxidized low-density lipoprotein receptor-1, superoxide dismutase, cyclooxygenase-2, caspase-1, and interleukin-1ß were significantly reduced in the treatment group. PCSK9i decreased the ratio of phosphorylated to total p38 mitogen-activated protein kinase and extracellular signal-regulated kinase in the aorta of rats with hyperglycemia. Conclusions: Short-term treatment with PCSK9i preserved endothelial function, induced vascular dilatation, and increased blood flow in the AC fistula of rats with hyperglycemia. The pleiotropic mechanisms were associated with the suppression of oxidative stress and tissue inflammation during hyperglycemia.

Changing how the third 95 is counted: suitable indicators for measuring U = U with findings from Taiwan.

INTRODUCTION: The World Health Organisation has implemented multiple HIV prevention policies and strived to achieve the 90-90-90 goal by 2020, achieving the 95-95-95 goal by 2030, which refers to 95% of patients living with HIV knowing their HIV status, 95% of patients living with HIV receiving continual care and medication, and 95% of patients living with HIV exhibiting viral suppression. However, how to measure the status of viral suppression varies, and it is hard to indicate the quality of HIV care. The study aimed to examine the long-term viral load suppression in these cases and explore potential factors affecting the control of long-term viral load. METHODS: This study analyzed viral load testing data from HIV patients who are still alive during the period from notification up to 2019-2020. Three indicators were calculated, including durable viral suppression, Viremia copy-years, and Viral load > 1,500 copies/ml, to assess the differences between them. RESULTS: Among the 27,706 cases included in the study, the proportion of persistent viral load suppression was 87%, with 4% having viral loads exceeding 1,500 copies/ml. The average duration from notification to viral load suppression was 154 days, and the geometric mean of annual viral replication was 90 copies*years/ml. Regarding the last available viral load measurement, 96% of cases had an undetectable viral load. However, we observed that 9.3% of cases, while having an undetectable viral load for their last measurement, did not show consistent long-term viral load suppression. An analysis of factors associated with non-persistent viral load suppression revealed higher risk in younger age groups, individuals with an educational level of high school or below, injection drug users, cases from the eastern region, those seeking care at regional hospitals, cases with drug resistance data, individuals with lower healthcare continuity, and those with an initial CD4 count below 350 during the study period. CONCLUSIONS: The recommendation is to combine it with the indicator of sustained viral load suppression for a more accurate assessment of the risk of HIV transmission within the infected community.

Optimizing Disc and Cartilage Endplate Preparation in Full-Endoscopic Lumbar Interbody Fusion: An In-Depth Exploration of Surgical Instruments with a Technique Note and Narrative Review.

Full-endoscopic lumbar interbody fusion (FELIF) is a critical yet challenging procedure. However, extensive analyses of discectomy and cartilage endplate preparation techniques are limited. This can be attributed to the lack of universal protocols owing to diverse surgical practices and equipment preferences. Therefore, this narrative review presents a comprehensive overview of discectomy and cartilage endplate preparation techniques in FELIF. A literature search of the PubMed, Embase, and Google Scholar databases in December 2023 retrieved 490 studies, of which 53 met the predefined inclusion criteria, and 1373 patients were included in the analyses. Spinal endoscopic disc and cartilage endplate removal can be categorized into 2 main types: removal under direct endoscopic visualization and removal under radiographic guidance with the protection of a working sheath following the endoscope's removal. Removal under direct visualization ensures the safety and precision of the procedure. Radiographic guidance can enhance the efficiency of the removal process. Specially designed instruments can be utilized through the narrow working channels of spinal endoscopes for the scraping surgery. Moreover, many traditional spinal endoscopic instruments, through specific techniques and manipulations, can also aid in cartilage removal. The approaches and techniques vary significantly among physicians, but overall, these instruments and techniques aim to achieve a safe and efficient disc-scraping outcome. Thus, this review may offer a comprehensive guidance to surgeons in selecting the most efficient practices for FELIF. Uniform procedural protocols are needed to ensure broader adoption and standardized practice.

Resting-State Network Analysis Reveals Altered Functional Brain Connectivity in Essential Tremor.

Introduction: Essential tremor (ET) comprises motor and non-motor-related features, whereas the current neuro-pathogenetic basis is still insufficient to explain the etiologies of ET. Although cerebellum-associated circuits have been discovered, the large-scale cerebral network connectivity in ET remains unclear. This study aimed to characterize the ET in terms of functional connectivity as well as network. We hypothesized that the resting-state network (RSN) within cerebrum could be altered in patients with ET. Methods: Resting-state functional magnetic resonance imaging (fMRI) was used to evaluate the inter- and intra-network connectivity as well as the functional activity in ET and normal control. Correlation analysis was performed to explore the relationship between RSN metrics and tremor features. Results: Comparison of inter-network connectivity indicated a decreased connectivity between default mode network and ventral attention network in the ET group (p < 0.05). Differences in functional activity (assessed by amplitude of low-frequency fluctuation, ALFF) were found in several brain regions participating in various RSNs (p < 0.05). The ET group generally has higher degree centrality over normal control. Correlation analysis has revealed that tremor features are associated with inter-network connectivity (|r| = 0.135-0.506), ALFF (|r| = 0.313-0.766), and degree centrality (|r| = 0.523-0.710). Conclusion: Alterations in the cerebral network of ET were detected by using resting-state fMRI, demonstrating a potentially useful approach to explore the cerebral alterations in ET.

Advancing Detectivity and Stability of Near-Infrared Organic Photodetectors via a Facile and Efficient Cathode Interlayer.

Near-infrared (NIR) organic photodetectors (OPDs) are pivotal in numerous technological applications due to their excellent responsivity within the NIR region. Polyethylenimine ethoxylated (PEIE) has conventionally been employed as an electron transport layer (hole-blocking layer) to suppress dark current (JD) and enhance charge transport. However, the limitations of PEIE in chemical stability, processing conditions, environmental impact, and absorption range have spurred the development of alternative materials. In this study, we introduced a novel solution: a hybrid of sol-gel zinc oxide (ZnO) and N,N'-bis(N,N-dimethylpropan-1-amine oxide)perylene-3,4,9,10-tetracarboxylic diimide (PDINO) as the electron transport layer for NIR-OPDs. Our fabricated OPD exhibited significantly improved responsivity, reduced internal traps, and enhanced charge transfer efficiency. The detectivity, spanning from 400 to 1100 nm, surpassed ∼5 × 1012 Jones, reaching ∼1.1 × 1012 Jones at 1000 nm, accompanied by an increased responsivity of 0.47 A/W. Also, the unpackaged OPD remarkedly demonstrated stable JD and external quantum efficiency (EQE) over 1000 h under dark storage conditions. This innovative approach not only addresses the drawbacks of conventional PEIE-based OPDs but also offers promising avenues for the development of high-performance OPDs in the future.

Spray-Coated MoO3 Hole Transport Layer for Inverted Organic Photovoltaics.

This study focuses on the hole transport layer of molybdenum trioxide (MoO3) for inverted bulk heterojunction (BHJ) organic photovoltaics (OPVs), which were fabricated using a combination of a spray coating and low-temperature annealing process as an alternative to the thermal evaporation process. To achieve a good coating quality of the sprayed film, the solvent used for solution-processed MoO3 (S-MoO3) should be well prepared. Isopropanol (IPA) is added to the as-prepared S-MoO3 solution to control its concentration. MoO3 solutions at concentrations of 5 mg/mL and 1 mg/mL were used for the spray coating process. The power conversion efficiency (PCE) depends on the concentration of the MoO3 solution and the spray coating process parameters of the MoO3 film, such as flow flux, spray cycles, and film thickness. The results of devices fabricated from solution-processed MoO3 with various spray fluxes show a lower PCE than that based on thermally evaporated MoO3 (T-MoO3) due to a limiting FF, which gradually increases with decreasing spray cycles. The highest PCE of 2.8% can be achieved with a 1 mg/mL concentration of MoO3 solution at the sprayed flux of 0.2 mL/min sprayed for one cycle. Additionally, S-MoO3 demonstrates excellent stability. Even without any encapsulation, OPVs can retain 90% of their initial PCE after 1300 h in a nitrogen-filled glove box and under ambient air conditions. The stability of OPVs without any encapsulation still has 90% of its initial PCE after 1300 h in a nitrogen-filled glove box and under air conditions. The results represent an evaluation of the feasibility of solution-processed HTL, which could be employed for a large-area mass production method.

Novel Cervical Endoscopic Unilateral Laminoforaminotomy for Bilateral Decompression in Cervical Spondylosis Myeloradiculopathy: A Technical Note and Clinical Results.

Background: This study investigates the efficacy of the Cervical Endoscopic Unilateral Laminoforaminotomy for Bilateral Decompression (CE-ULFBD) technique in treating cervical myeloradiculopathy, primarily caused by degenerative spondylosis. Traditionally managed through multisegmental anterior cervical discectomy and fusion (ACDF) or laminoplasty combined with foraminotomy, this condition has recently experienced a promising shift towards minimally invasive approaches, particularly endoscopic spinal decompression. While empirical evidence is still emerging, these techniques show potential for effective treatment. Method: The objective was to evaluate the outcomes of CE-ULFBD in achieving single or multilevel bilateral foraminal and central decompression, emphasizing the reduction of injury to posterior cervical muscles and the associated postoperative neck soreness common in conventional procedures. This paper delineates the surgical procedures involved in CE-ULFBD and presents the clinical outcomes of nine patients diagnosed with myeloradiculopathy due to severe cervical stenosis. Result: Assessments were conducted using the Visual Analogue Scale (VAS) for neck and arm pain and the Modified Japanese Orthopaedic Association scale (mJOA) for the activity measurement of daily living. Results indicated a considerable decrease in pain levels according to the VAS, coupled with significant improvements in functional capacities as measured by the mJOA scale. Additionally, no major postoperative complications were noted during the follow-up period. Conclusion: The study concludes that CE-ULFBD is a safe and effective approach for the treatment of cervical myeloradiculopathy resulting from severe cervical stenosis, offering a viable and less invasive alternative to traditional decompressive surgeries.

Design of a Humidity Sensor for a PPE Kit Using a Flexible Paper Substrate.

The present work reports the rapid sweat detection inside a PPE kit using a flexible humidity sensor based on hydrothermally synthesized ZnO (zinc oxide) nanoflowers (ZNFs). Physical characterization of ZNFs was done using scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transmission infrared spectroscopy (FTIR), UV-visible, particle size analysis, Raman analysis, and X-ray photoelectron spectroscopy (XPS) analysis, and the hydrophilicity was investigated by using contact angle measurement. Fabrication of a flexible sensor was done by deposition on the paper substrate using the spin coating technique. It exhibited high sensitivity and low response and recovery times in the humidity range 10-95%RH. The sensor demonstrated the highest sensitivity of 296.70 nF/%RH within the humidity range 55-95%RH, and the rapid response and recovery times were also calculated and found as 5.10/1.70 s, respectively. The selectivity of the proposed sensor was also analyzed, and it is highly sensitive to humidity. The humidity sensing characteristics were theoretically witnessed in terms of the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) and electronic properties of sensing materials in ambient and humid conditions. These theoretical results are evidence of the interaction of ZnO with humidity. Overall, the present study provides a scope of architecture-enabled paper-based humidity sensors for the detection of sweat levels inside PPE kits for health workers.

Improving Sensitivity and Reproducibility of Surface-Enhanced Raman Scattering Biochips Utilizing Magnetoplasmonic Nanoparticles and Statistical Methods.

Surface-enhanced Raman scattering (SERS) technology has been widely recognized for its remarkable sensitivity in biochip development. This study presents a novel sandwich immunoassay that synergizes SERS with magnetoplasmonic nanoparticles (MPNs) to improve sensitivity. By taking advantage of the unique magnetism of these nanoparticles, we further enhance the detection sensitivity of SERS biochips through the applied magnetic field. Despite the high sensitivity, practical applications of SERS biochips are often limited by the issues of stability and reproducibility. In this study, we introduced a straightforward statistical method known as "Gaussian binning", which involves initially binning the two-dimensional Raman mapping data and subsequently applying Gaussian fitting. This approach enables a more consistent and reliable interpretation of data by reducing the variability inherent in Raman signal measurements. Based on our method, the biochip, targeting for C-reactive protein (CRP), achieves an impressive detection limit of 5.96 fg/mL, and with the application of a 3700 G magnetic field, it further enhances the detection limit by 5.7 times, reaching 1.05 fg/mL. Furthermore, this highly sensitive and magnetically tunable SERS biochip is easily designed for versatile adaptability, enabling the detection of other proteins. We believe that this innovation holds promise in enhancing the clinical applicability of SERS biochips.

The novel Kambin Torpedo full-endoscopic lumbar interbody fusion technique: a case series.

PURPOSE: Full-endoscopic lumbar interbody fusion (FELIF) is a new-generation treatment for spondylolisthesis. However, owing to their unique characteristics, the two main endoscopic fusion trajectories, the trans-Kambin and posterolateral approaches, have important limitations. Herein, we aimed to introduce a new technique called Kambin Torpedo FELIF (KT-FELIF). METHODS: The KT-FELIF technique is based on the trans-Kambin approach. It additionally completes ipsilateral total facetectomy and contralateral direct decompression. Thus, this novel technique combines the advantages of the trans-Kambin and posterolateral approaches. RESULTS: We reported on the indications and technical steps of KT-FELIF and provided intraoperative and animated videos to clarify the procedure. Short-term follow-up based on 3-month postoperative computed tomography and plain films images taken at least 3 months after surgery showed adequate bony decompression, a large bone graft contact area, and good intervertebral trabecular bone growth without radiolucent lines between the graft, cage, and end plate. The clinical results, such as ipsilateral and contralateral visual analog scale and Oswestry disability index values, gradually improved at 1 and 3 months postoperatively. No complications were observed. CONCLUSIONS: KT-FELIF is a promising FELIF technique for achieving bilateral direct decompression through a unilateral approach while accomplishing thorough discectomy and endplate preparation.

Harnessing 2D Ruddlesden-Popper Perovskite with Polar Organic Cation for Ultrasensitive Multibit Nonvolatile Transistor-Type Photomemristors.

Photomemristors have been regarded as one of the most promising candidates for next-generation hardware-based neuromorphic computing due to their potentials of fast data transmission and low power consumption. However, intriguingly, so far, photomemristors seldom display truly nonvolatile memory characteristics with high light sensitivity. Herein, we demonstrate ultrasensitive photomemristors utilizing two-dimensional (2D) Ruddlesden-Popper (RP) perovskites with a highly polar donor-acceptor-type push-pull organic cation, 4-(5-(2-aminoethyl)thiophen-2-yl)benzonitrile+ (EATPCN+), as charge-trapping layers. High linearity and almost zero-decay retention are observed in (EATPCN)2PbI4 devices, which are very distinct from that of the traditional 2D RP perovskite devices consisting of nonpolar organic cations, such as phenethylamine+ (PEA+) and octylamine+ (OA+), and traditional 3D perovskite devices consisting of methylamine+ (MA+). The 2-fold advantages, including desirable spatial crystal arrangement and engineered energetic band alignment, clarify the mechanism of superior performance in (EATPCN)2PbI4 devices. The optimized (EATPCN)2PbI4 photomemristor also shows a memory window of 87.9 V and an on/off ratio of 106 with a retention time of at least 2.4 × 105 s and remains unchanged after >105 writing-reading-erasing-reading endurance cycles. Very low energy consumptions of 1.12 and 6 fJ for both light stimulation and the reading process of each status update are also demonstrated. The extremely low power consumption and high photoresponsivity were simultaneously achieved. The high photosensitivity surpasses that of a state-of-the-art commercial pulse energy meter by several orders of magnitude. With their outstanding linearity and retention, rabbit images have been rebuilt by (EATPCN)2PbI4 photomemristors, which truthfully render the image without fading over time. Finally, by utilizing the powerful ∼8 bits of nonvolatile potentiation and depression levels of (EATPCN)2PbI4 photomemristors, the accuracies of the recognition tasks of CIFAR-10 image classification and MNIST handwritten digit classification have reached 89% and 94.8%, respectively. This study represents the first report of utilizing a functional donor-acceptor type of organic cation in 2D RP perovskites for high-performance photomemristors with characteristics that are not found in current halide perovskites.

Modified CAVE score for predicting late seizures after intracerebral hemorrhage.

BACKGROUND AND PURPOSE: Seizures commonly occur in patients with intracerebral hemorrhage (ICH). Anticonvulsants are commonly used for preventing seizures in patients with ICH. Thus, patients with ICH at high risk of seizures must be identified. The study aims to elucidate whether double the score of cortex involvement in ICH patients can increase accuracy of CAVE score for predicting late seizures. METHOD: This retrospective analysis of the medical records of surviving patients admitted between June 1, 2013, and December 31, 2019. Validated the CAVE score and modified it (CAVE2). The main outcome of patients with ICH was seizures. The first seizures occurring within 7 days after a stroke were defined as early seizures. Seizures occurring after 1 week of stroke onset, including patients who had experienced early seizures or patients who had not, were defined as late seizures. CAVE and CAVE2 scores were validated using the cohort. The accuracy and discrimination of those two scores were accessed by the area under the operating characteristic curve. Akaike information criterion, integrated discrimination improvement, and continuous net reclassification improvement were used to assess the performance of the CAVE and CAVE2 scores. RESULTS: In the cohort showed that late seizures occurred in 12.7% (52/408) of patients with ICH. Male sex, age > 65 years, cortex involvement, and early seizures were associated with the occurrence of late seizures, with odds ratios of 2.09, 2.04, 4.12, and 3.78, respectively. The risk rate of late seizures was 6.66% (17/255), 14.8% (17/115), and 47.4% (18/38) for CAVE scores ≤ 1, 2, and ≥ 3, and 4.6% (12/258), 18.3% (13/71), and 54.4 (20/37) for CAVE2 scores ≤ 1, 2, and ≥ 3 respectively. The C-statistics for the CAVE and CAVE2 scores were 0.73 and 0.74 respectively. CONCLUSION: The CAVE score can identify patients with ICH and high risk for late seizures. The CAVE can be modified by changing the score of cortex involvement to 2 points to improve accuracy in predicting late seizures in patients with ICH.

The Predictors and Outcomes of Functional Mitral Stenosis following Surgical Mitral Valve Repair: A Retrospective Analysis.

To optimize mitral valve repair outcomes, it is crucial to comprehend the predictors of functional mitral valve stenosis (FMS), to enhance preoperative assessments, and to adapt intraoperative treatment strategies. This study aimed to identify FMS risk factors, contributing valuable insights for refining surgical techniques. Among 228 selected patients, 215 underwent postoperative echocardiography follow-ups, and 36 met the FMS criteria based on a mean trans-mitral pressure gradient of >5 mmHg. Patients with FMS exhibited higher pulmonary systolic arterial pressure and increased late mortality during the follow-up. Univariable logistic regression analysis identified several risk factors for FMS, including end-stage renal disease, anterior leaflet lesion, concomitant aortic valve replacement, smaller ring size, ring type, and neochordae implantation. Conversely, resection alone and resection combined with neochordae implantation had protective effects against FMS. Multivariable logistic regression analysis revealed that smaller ring sizes and patch repair independently predicted FMS. When focusing on degenerative mitral regurgitation, the neochordae implantation without resection in leaflet repair, emerged as an independent predictor of FMS. Surgeons should weigh the substantial impact of surgical procedures on postoperative trans-mitral pressure gradients, emphasizing preoperative evaluation and techniques such as precise ring size assessment and effective leaflet management.

Electrospun SnO2/WO3 Heterostructure Nanocomposite Fiber for Enhanced Acetone Vapor Detection.

Volatile organic compounds (VOCs), often invisible but potentially harmful, are prevalent in industrial and laboratory settings, posing health risks. Detecting VOCs in real-time with high sensitivity and low detection limits is crucial for human health and safety. The optical sensor, utilizing the gasochromic properties of sensing materials, offers a promising way of achieving rapid responses in ambient environments. In this study, we investigated the heterostructure of SnO2/WO3 nanoparticles and employed it as the primary detection component. Using the electrospinning technique, we fabricated a sensing fiber containing Ag NPs, poly(methyl methacrylate) (PMMA), and SnO2/WO3 (PMMA-Ag-SnO2/WO3) for acetone vapor detection. Following activation via UV/ozone treatment, we observed charge migration between WO3 and SnO2, resulting in a substantial generation of superoxide radicals on SnO2 nanoparticles. This phenomenon facilitates structural deformation of the fiber and alters the oxidation state of tungsten ions, ultimately leading to a significant change in extinction when exposed to acetone vapor. As a result, PMMA-Ag-SnO2/WO3 fiber achieves a detection limit of 100 ppm and a response time of 1.0 min for acetone detection. These findings represent an advancement in the development of sensitive and selective VOC sensing devices.

Highly Efficient Flexible Roll-to-Roll Organic Photovoltaics Based on Non-Fullerene Acceptors.

The ability of organic photovoltaics (OPVs) to be deposited on flexible substrates by roll-to-roll (R2R) processes is highly attractive for rapid mass production. Many research teams have demonstrated the great potential of flexible OPVs. However, the fabrication of R2R-coated OPVs is quite limited. There is still a performance gap between the R2R flexible OPVs and the rigid OPVs. In this study, we demonstrate the promising photovoltaic characteristics of flexible OPVs fabricated from blends of low bandgap polymer poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1,2-b:4,5-b']dithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7'-bis(2-ethylhexyl)benzo[1',2'-c:4',5'-c']dithiophene-4,8-dione)] (PBDB-T) and non-fullerene 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (ITIC). We successfully R2R slot-die coated the flexible OPVs with high power conversion efficiency (PCE) of over 8.9% under irradiation of simulated sunlight. Our results indicate that the processing parameters significantly affect the PCE of R2R flexible OPVs. By adjusting the amount of solvent additive and processing temperature, as well as optimizing thermal annealing conditions, the high PCE of R2R slot-die coated OPVs can be obtained. These results provide significant insights into the fundamentals of highly efficient OPVs for the R2R slot-die coating process.

FGF2 drives osteosarcoma metastasis through activating FGFR1-4 receptor pathway-mediated ICAM-1 expression.

Osteosarcoma is a malignant tumor with high metastatic potential, such that the overall 5-year survival rate of patients with metastatic osteosarcoma is only 20%. Therefore, it is necessary to unravel the mechanisms of osteosarcoma metastasis to identify predictors of metastasis by which to develop new therapies. Fibroblast growth factor 2 (FGF2) is a growth factor involved in embryonic development, cell migration, and proliferation. The overexpression of FGF2 and FGF receptors (FGFRs) has been shown to enhance cancer cell proliferation in lung, breast, gastric, and prostate cancers as well as melanoma. Nonetheless, the roles of FGF2 and FGFRs in human osteosarcoma cells remain unknown. In the present study, we found that FGF2 was overexpressed in human osteosarcoma sections and correlated with lung metastasis. Treatment of FGF2 induced migration activity, invasion activity, and intercellular adhesion molecule (ICAM)-1 expression in osteosarcoma cells. In particular, the downregulation or antagonism of FGFR1-4 suppressed FGF2-induced ICAM-1 expression and cancer cell migration. Furthermore, FGFR1, FGFR2, FGFR3, and FGFR4 were involved in FGF2-induced the phospholipase Cß/protein kinase Cα/proto-oncogene c-Src signaling pathway and triggered c-Jun nuclear translocation. Subsequent c-Jun upregulation of activator protein-1 transcription activity on the ICAM-1 promoter led to an increased migration of osteosarcoma cells. Moreover, the knockdown of endogenous FGF2 suppressed ICAM-1 expression and migration of osteosarcoma cells. These findings suggest that FGF2/FGFR1-4 signaling promotes metastasis via its direct downstream target gene ICAM-1, revealing a novel potential therapeutic target for osteosarcoma.

High-Performance Perovskite Solar Cells and Modules Fabricated by Slot-Die Coating with Nontoxic Solvents.

Energy shortage has become a global issue in the twenty-firt century, as energy consumption grows at an alarming rate as the fossil fuel supply exhausts. Perovskite solar cells (PSCs) are a promising photovoltaic technology that has grown quickly in recent years. Its power conversion efficiency (PCE) is comparable to that of traditional silicon-based solar cells, and scale-up costs can be substantially reduced due to its utilization of solution-processable fabrication. Nevertheless, most PSCs research uses hazardous solvents, such as dimethylformamide (DMF) and chlorobenzene (CB), which are not suitable for large-scale ambient operations and industrial production. In this study, we have successfully deposited all of the layers of PSCs, except the top metal electrode, under ambient conditions using a slot-die coating process and nontoxic solvents. The fully slot-die coated PSCs exhibited PCEs of 13.86% and 13.54% in a single device (0.09 cm2) and mini-module (0.75 cm2), respectively.

Injectable Hydrogel Guides Neurons Growth with Specific Directionality.

Visual disabilities affect more than 250 million people, with 43 million suffering from irreversible blindness. The eyes are an extension of the central nervous system which cannot regenerate. Neural tissue engineering is a potential method to cure the disease. Injectability is a desirable property for tissue engineering scaffolds which can eliminate some surgical procedures and reduce possible complications and health risks. We report the development of the anisotropic structured hydrogel scaffold created by a co-injection of cellulose nanofiber (CNF) solution and co-polypeptide solution. The positively charged poly (L-lysine)-r-poly(L-glutamic acid) with 20 mol% of glutamic acid (PLLGA) is crosslinked with negatively charged CNF while promoting cellular activity from the acid nerve stimulate. We found that CNF easily aligns under shear forces from injection and is able to form hydrogel with an ordered structure. Hydrogel is mechanically strong and able to support, guide, and stimulate neurite growth. The anisotropy of our hydrogel was quantitatively determined in situ by 2D optical microscopy and 3D X-ray tomography. The effects of PLLGA:CNF blend ratios on cell viability, neurite growth, and neuronal signaling are systematically investigated in this study. We determined the optimal blend composition for stimulating directional neurite growth yielded a 16% increase in length compared with control, reaching anisotropy of 30.30% at 10°/57.58% at 30°. Using measurements of calcium signaling in vitro, we found a 2.45-fold increase vs. control. Based on our results, we conclude this novel material and unique injection method has a high potential for application in neural tissue engineering.

Transparent organic upconversion devices displaying high-resolution, single-pixel, low-power infrared images perceived by human vision.

Crystalline photodiodes remain the most viable infrared sensing technology of choice, yet the opacity and the limitation in pixel size reduction per se restrict their development for supporting high-resolution in situ infrared images. In this work, we propose an all-organic non-fullerene-based upconversion device that brings invisible infrared signal into human vision via exciplex cohost light-emissive system. The device reaches an infrared-to-visible upconversion efficiency of 12.56% by resolving the 940-nm infrared signal (power density of 103.8 µW cm-2). We tailor a semitransparent (AVT, ~60%), large-area (10.35 cm2), lightweight (22.91 g), single-pixel upconversion panel to visualize the infrared power density down to 0.75 µW cm2, inferring a bias-switching linear dynamic range approaching 80 dB. We also demonstrate the possibility of visualizing low-intensity infrared signals from the Face ID and LiDAR, which should fill the gap in the existing technology based on pixelated complementary metal-oxide semiconductors with optical lenses.

Achieving a Highly Stable Perovskite Photodetector with a Long Lifetime Fabricated via an All-Vacuum Deposition Process.

Hybrid organic-inorganic metal halide perovskites (HOIP) have become a promising visible light sensing material due to their excellent optoelectronic characteristics. Despite the superiority, overcoming the stability issue for commercialization remains a challenge. Herein, an extremely stable photodetector was demonstrated and fabricated with Cs0.06FA0.94Pb(I0.68Br0.32)3 perovskite by an all-vacuum process. The photodetector achieves a current density up to 1.793 × 10-2 A cm-2 under standard one sun solar illumination while maintaining a current density as low as 8.627 × 10-10 A cm-2 at zero bias voltage. The linear dynamic range (LDR) and transient voltage response were found to be comparable to the silicon-based photodetector (Newport 818-SL). Most importantly, the device maintains 95% of the initial performance after 960 h of incessant exposure under one sun solar illumination. The achievements of these outstanding results contributed to the all-vacuum deposition process delivering a film with high stability and good uniformity, which in turn delays the degradation process. The degradation mechanism is further investigated by impedance spectroscopy to reveal the charge dynamics in the photodetector under different exposure times.