RESUMEN
This study addresses the analysis of emerging contaminants, often using chromatographic techniques coupled to mass spectrometry. However, sample preparation is often required prior to instrumental analysis, and dispersive liquid-liquid microextraction (DLLME) is a viable strategy in this context. DLLME stands out for its ability to reduce sample and solvent volumes. Notably, dispersive liquid-liquid microextraction using magnetic ionic liquids (MILs) has gained relevance due to the incorporation of paramagnetic components in the chemical structure, thereby eliminating the centrifugation step. A pyrolizer was selected in this work to introduce sample onto the GC column, since the MIL is extremely viscous and incompatible with direct introduction through an autosampler. This study is the first to report the use of a DLLME/MIL technique for sample introduction through a pyrolizer in gas chromatography coupled to mass spectrometry (GC-MS). This approach enables the MIL to be compatible with gas chromatography systems, resulting in optimized analytical and instrument performance. The analysis of polybrominated diphenyl ether flame retardants (PBDEs) was focused on the PBDE congeners 28, 47, 99, 100, and 153 in sewage sludge samples. The [P6,6,6,14+]2[MnCl42-] MIL was thoroughly characterized using UV-Vis, Fourier transform infrared spectroscopy (FTIR), and Raman spectroscopy, as well as thermal analysis. In the chromatographic method, a pyrolyzer was used in the sample introduction step (Py-GC-MS), and critical injection settings were optimized using multivariate approaches. Optimized conditions were achieved with a temperature of 220 °C, a pyrolysis time of 0.60 min, and an injection volume of 9.00 µL. DLLME optimization was performed through central compound planning (CCD), and optimized training conditions were achieved with 10.0 mg of MIL, 3.00 µL of acetonitrile (ACN) as dispersive solvent, extraction time of 60 s, and volume of a sample of 8.50 mL. Precision was observed to range from 0.11 % to 12.5 %, with limits of detection (LOD) of 44.4 µg L-1 for PBDE 28, 16.9 µg L-1 for PBDE 47 and PBDE 99, 33.0 µg L-1 for PBDE 100 and 375 µg L-1 for PBDE 153. PBDE 28 was identified and analyzed in the sludge sample at a concentration of 800 µg L-1. The use of MIL in dispersive liquid-liquid microextraction combined with pyrolysis gas chromatography-mass spectrometry enables identification and quantification of PBDEs in sewage sludge samples at concentrations down to the µg L-1 level.
Asunto(s)
Retardadores de Llama , Cromatografía de Gases y Espectrometría de Masas , Éteres Difenilos Halogenados , Líquidos Iónicos , Microextracción en Fase Líquida , Aguas del Alcantarillado , Microextracción en Fase Líquida/métodos , Líquidos Iónicos/química , Aguas del Alcantarillado/química , Retardadores de Llama/análisis , Retardadores de Llama/aislamiento & purificación , Cromatografía de Gases y Espectrometría de Masas/métodos , Éteres Difenilos Halogenados/análisis , Éteres Difenilos Halogenados/aislamiento & purificación , Límite de Detección , PirólisisRESUMEN
Numerous antimicrobial drugs have been prescribed to kill or inhibit the growth of microbes such as bacteria, fungi, and viruses. Despite the known therapeutic efficacy of these drugs, inefficient delivery could result in an inadequate therapeutic index and several side effects. In order to overcome this adversity, the present study investigated antibiotic drug loading in zeolitic imidazolate frameworks (ZIFs), in association with ZnO nanoparticles with known antimicrobial properties. In an economic synthesis method, the ZnO surface was first converted to ZIF-8 with 2-methylimidazole as a ligand, resulting in a ZnO@ZIF-8 structure. This system enables the high drug-loading efficiency (46%) of an antimicrobial drug, ciprofloxacin, within the pores of the ZIF-8. This association provides a control of the release of the active moieties, in simulated body-fluid conditions, with a maximum of 67% released in 96 h. The antibacterial activities of ZnO@ZIF-8 and CIP-ZnO@ZIF-8 were tested against the Gram-positive Staphylococcus aureus strain and the Gram-negative Pseudomonas aeruginosa strain, showing good growth inhibition. This result was obtained by combining ZnO@ZIF-8 with ciprofloxacin in a minimal inhibitory concentration (MIC) that was 10 times lower than ZnO@ZIF-8 for S. aureus and 200 times lower for P. aeruginosa, suggesting that CIP-ZnO@ZIF-8 may have potential application in prolonged antimicrobial treatment.