High-coherence parallelization in integrated photonics.

Coherent optics has profoundly impacted diverse applications ranging from communications, LiDAR to quantum computations. However, developing coherent systems in integrated photonics comes at great expense in hardware integration and energy efficiency. Here we demonstrate a high-coherence parallelization strategy for advanced integrated coherent systems at minimal cost. By using a self-injection locked microcomb to injection lock distributed feedback lasers, we achieve a record high on-chip gain of 60 dB with no degradation in coherence. This strategy enables highly coherent channels with linewidths down to 10 Hz and power over 20 dBm. The overall electrical-to-optical efficiency reaches 19%, comparable to that of advanced semiconductor lasers. This method supports a silicon photonic communication link with an unprecedented data rate beyond 60 Tbit/s and reduces phase-related DSP consumption by 99.99999% compared to traditional III-V laser pump schemes. This work paves the way for realizing scalable, high-performance coherent integrated photonic systems, potentially benefiting numerous applications.

Investigation of Q degradation in low-loss Si3N4 from heterogeneous laser integration.

High-performance, high-volume-manufacturing Si3N4 photonics requires extremely low waveguide losses augmented with heterogeneously integrated lasers for applications beyond traditional markets of high-capacity interconnects. State-of-the-art quality factors (Q) over 200 million at 1550 nm have been shown previously; however, maintaining high Qs throughout laser fabrication has not been shown. Here, Si3N4 resonator intrinsic Qs over 100 million are demonstrated on a fully integrated heterogeneous laser platform. Qi is measured throughout laser processing steps, showing degradation down to 50 million from dry etching, metal evaporation, and ion implant steps, and controllable recovery to over 100 million from annealing at 250 ∘C-350 ∘C.

Photonic chip-based low-noise microwave oscillator.

Numerous modern technologies are reliant on the low-phase noise and exquisite timing stability of microwave signals. Substantial progress has been made in the field of microwave photonics, whereby low-noise microwave signals are generated by the down-conversion of ultrastable optical references using a frequency comb1-3. Such systems, however, are constructed with bulk or fibre optics and are difficult to further reduce in size and power consumption. In this work we address this challenge by leveraging advances in integrated photonics to demonstrate low-noise microwave generation via two-point optical frequency division4,5. Narrow-linewidth self-injection-locked integrated lasers6,7 are stabilized to a miniature Fabry-Pérot cavity8, and the frequency gap between the lasers is divided with an efficient dark soliton frequency comb9. The stabilized output of the microcomb is photodetected to produce a microwave signal at 20 GHz with phase noise of -96 dBc Hz-1 at 100 Hz offset frequency that decreases to -135 dBc Hz-1 at 10 kHz offset-values that are unprecedented for an integrated photonic system. All photonic components can be heterogeneously integrated on a single chip, providing a significant advance for the application of photonics to high-precision navigation, communication and timing systems.

Multimodality integrated microresonators using the Moiré speedup effect.

High-Q microresonators are indispensable components of photonic integrated circuits and offer several useful operational modes. However, these modes cannot be reconfigured after fabrication because they are fixed by the resonator's physical geometry. In this work, we propose a Moiré speedup dispersion tuning method that enables a microresonator device to operate in any of three modes. Electrical tuning of Vernier coupled rings switches operating modality to Brillouin laser, bright microcomb, and dark microcomb operation on demand using the same hybrid-integrated device. Brillouin phase matching and microcomb operation across the telecom C-band is demonstrated. Likewise, by using a single-pump wavelength, the operating mode can be switched. As a result, one universal design can be applied across a range of applications. The device brings flexible mixed-mode operation to integrated photonic circuits.

AlGaAs soliton microcombs at room temperature.

Soliton mode locking in high-Q microcavities provides a way to integrate frequency comb systems. Among material platforms, AlGaAs has one of the largest optical nonlinearity coefficients, and is advantageous for low-pump-threshold comb generation. However, AlGaAs also has a very large thermo-optic effect that destabilizes soliton formation, and femtosecond soliton pulse generation has only been possible at cryogenic temperatures. Here, soliton generation in AlGaAs microresonators at room temperature is reported for the first time, to the best of our knowledge. The destabilizing thermo-optic effect is shown to instead provide stability in the high-repetition-rate soliton regime (corresponding to a large, normalized second-order dispersion parameter D2/κ). Single soliton and soliton crystal generation with sub-milliwatt optical pump power are demonstrated. The generality of this approach is verified in a high-Q silica microtoroid where manual tuning into the soliton regime is demonstrated. Besides the advantages of large optical nonlinearity, these AlGaAs devices are natural candidates for integration with semiconductor pump lasers. Furthermore, the approach should generalize to any high-Q resonator material platform.

3D integration enables ultralow-noise isolator-free lasers in silicon photonics.

Photonic integrated circuits are widely used in applications such as telecommunications and data-centre interconnects1-5. However, in optical systems such as microwave synthesizers6, optical gyroscopes7 and atomic clocks8, photonic integrated circuits are still considered inferior solutions despite their advantages in size, weight, power consumption and cost. Such high-precision and highly coherent applications favour ultralow-noise laser sources to be integrated with other photonic components in a compact and robustly aligned format-that is, on a single chip-for photonic integrated circuits to replace bulk optics and fibres. There are two major issues preventing the realization of such envisioned photonic integrated circuits: the high phase noise of semiconductor lasers and the difficulty of integrating optical isolators directly on-chip. Here we challenge this convention by leveraging three-dimensional integration that results in ultralow-noise lasers with isolator-free operation for silicon photonics. Through multiple monolithic and heterogeneous processing sequences, direct on-chip integration of III-V gain medium and ultralow-loss silicon nitride waveguides with optical loss around 0.5 decibels per metre are demonstrated. Consequently, the demonstrated photonic integrated circuit enters a regime that gives rise to ultralow-noise lasers and microwave synthesizers without the need for optical isolators, owing to the ultrahigh-quality-factor cavity. Such photonic integrated circuits also offer superior scalability for complex functionalities and volume production, as well as improved stability and reliability over time. The three-dimensional integration on ultralow-loss photonic integrated circuits thus marks a critical step towards complex systems and networks on silicon.

Chip-based laser with 1-hertz integrated linewidth.

Lasers with hertz linewidths at time scales of seconds are critical for metrology, timekeeping, and manipulation of quantum systems. Such frequency stability relies on bulk-optic lasers and reference cavities, where increased size is leveraged to reduce noise but with the trade-off of cost, hand assembly, and limited applications. Alternatively, planar waveguide-based lasers enjoy complementary metal-oxide semiconductor scalability yet are fundamentally limited from achieving hertz linewidths by stochastic noise and thermal sensitivity. In this work, we demonstrate a laser system with a 1-s linewidth of 1.1 Hz and fractional frequency instability below 10-14 to 1 s. This low-noise performance leverages integrated lasers together with an 8-ml vacuum-gap cavity using microfabricated mirrors. All critical components are lithographically defined on planar substrates, holding potential for high-volume manufacturing. Consequently, this work provides an important advance toward compact lasers with hertz linewidths for portable optical clocks, radio frequency photonic oscillators, and related communication and navigation systems.

Correlated self-heterodyne method for ultra-low-noise laser linewidth measurements.

Narrow-linewidth lasers are important to many applications spanning precision metrology to sensing systems. Characterization of these lasers requires precise measurements of their frequency noise spectra. Here we demonstrate a correlated self-heterodyne (COSH) method capable of measuring frequency noise as low as 0.01 Hz2/Hz at 1 MHz offset frequency. The measurement setup is characterized by both commercial and lab-built lasers, and features low optical power requirements, fast acquisition time and high intensity noise rejection.

High-performance lasers for fully integrated silicon nitride photonics.

Silicon nitride (SiN) waveguides with ultra-low optical loss enable integrated photonic applications including low noise, narrow linewidth lasers, chip-scale nonlinear photonics, and microwave photonics. Lasers are key components to SiN photonic integrated circuits (PICs), but are difficult to fully integrate with low-index SiN waveguides due to their large mismatch with the high-index III-V gain materials. The recent demonstration of multilayer heterogeneous integration provides a practical solution and enabled the first-generation of lasers fully integrated with SiN waveguides. However, a laser with high device yield and high output power at telecommunication wavelengths, where photonics applications are clustered, is still missing, hindered by large mode transition loss, non-optimized cavity design, and a complicated fabrication process. Here, we report high-performance lasers on SiN with tens of milliwatts output power through the SiN waveguide and sub-kHz fundamental linewidth, addressing all the aforementioned issues. We also show Hertz-level fundamental linewidth lasers are achievable with the developed integration techniques. These lasers, together with high-Q SiN resonators, mark a milestone towards a fully integrated low-noise silicon nitride photonics platform. This laser should find potential applications in LIDAR, microwave photonics and coherent optical communications.

Reaching fiber-laser coherence in integrated photonics.

We self-injection-lock a diode laser to a 1.41 m long, ultra-high Q integrated resonator. The hybrid integrated laser reaches a frequency noise floor of 0.006Hz2/Hz at 4 MHz offset, corresponding to a Lorentzian linewidth below 40 mHz-a record among semiconductor lasers. It also exhibits exceptional stability at low-offset frequencies, with frequency noise of 200Hz2/Hz at 100 Hz offset. Such performance, realized in a system comprised entirely of integrated photonic chips, marks a milestone in the development of integrated photonics; and, for the first time, to the best of our knowledge, exceeds the frequency noise performance of commercially available, high-performance fiber lasers.

Seamless multi-reticle photonics.

While Moore's law predicted shrinking transistors would enable exponential scaling of electronic circuits, the footprint of photonic components is limited by the wavelength of light. Thus, future high-complexity photonic integrated circuits (PICs) such as petabit-per-second transceivers, thousand-channel switches, and photonic quantum computers will require more area than a single reticle provides. In our novel approach, we overlay and widen waveguides in adjacent reticles to stitch a smooth transition between misaligned exposures. In SiN waveguides, we measure ultralow loss of 0.0004 dB per stitch, and produce a stitched delay line 23 m in length. We extend the design to silicon channel waveguides, and predict 50-fold lower loss or 50-fold smaller footprint versus a multimode-waveguide-based method. Our approach enables large-scale PICs to scale seamlessly beyond the single-reticle limit.

Effects of nonlinear loss in high-Q Si ring resonators for narrow-linewidth III-V/Si heterogeneously integrated tunable lasers.

High-Q Si ring resonators play an important role in the development of widely tunable heterogeneously integrated lasers. However, while a high Q-factor (Q > 1 million) is important for ring resonators in a laser cavity, the parasitic high-power density in a Si resonator can deteriorate the laser performance at high power levels due to nonlinear loss. Here, we experimentally show that this detrimental effect can happen at moderate power levels (a few milliwatts) where typical heterogeneously integrated lasers work. We further compare different ring resonators, including extended Si ring resonators and Si3N4 ring resonators and provide practical approaches to minimize this effect. Our results provide explanations and guidelines for high-Q ring resonator designs in heterogeneously integrated tunable lasers, and they are also applicable for hybrid integrated butt-coupled lasers.

Deuterated silicon dioxide for heterogeneous integration of ultra-low-loss waveguides.

Ultra-low-loss waveguide fabrication typically requires high-temperature annealing beyond 1000°C to reduce the hydrogen content in deposited dielectric films. However, realizing the full potential of an ultra-low loss will require the integration of active materials that cannot tolerate high temperature. Uniting ultra-low-loss waveguides with on-chip sources, modulators, and detectors will require a low-temperature, low-loss dielectric to serve as a passivation and spacer layers for complex fabrication processes. We report a 250°C deuterated silicon dioxide film for top cladding in ultra-low-loss waveguides. Using multiple techniques, we measure propagation loss below 12 dB/m for the entire 1200-1650 nm range and top-cladding material absorption below 1 dB/m in the S, C, and L bands.

Ultra-efficient frequency comb generation in AlGaAs-on-insulator microresonators.

Recent advances in nonlinear optics have revolutionized integrated photonics, providing on-chip solutions to a wide range of new applications. Currently, state of the art integrated nonlinear photonic devices are mainly based on dielectric material platforms, such as Si3N4 and SiO2. While semiconductor materials feature much higher nonlinear coefficients and convenience in active integration, they have suffered from high waveguide losses that prevent the realization of efficient nonlinear processes on-chip. Here, we challenge this status quo and demonstrate a low loss AlGaAs-on-insulator platform with anomalous dispersion and quality (Q) factors beyond 1.5 × 106. Such a high quality factor, combined with high nonlinear coefficient and small mode volume, enabled us to demonstrate a Kerr frequency comb threshold of only ∼36 µW in a resonator with a 1 THz free spectral range, ∼100 times lower compared to that in previous semiconductor platforms. Moreover, combs with broad spans (>250 nm) have been generated with a pump power of ∼300 µW, which is lower than the threshold power of state-of the-art dielectric micro combs. A soliton-step transition has also been observed for the first time in an AlGaAs resonator.

Low loss (Al)GaAs on an insulator waveguide platform.

In this Letter, we demonstrate a low loss gallium arsenide and aluminum gallium arsenide on an insulator platform by heterogenous integration. The resonators on this platform exhibit record high quality factors up to 1.5×106, corresponding to a propagation loss ∼0.4 dB/cm. For the first time, to the best of our knowledge, the loss of integrated III-V semiconductor on insulator waveguides becomes comparable with that of the silicon-on-insulator waveguides. This Letter should have a significant impact on photonic integrated circuits (PICs) and become an essential building block for the evolving nonlinear PICs and integrated quantum photonic systems in the future.

Phase tuning by length contraction.

Typical integrated optical phase tuners alter the effective index. In this paper, we explore tuning by geometric deformation. We show that tuning efficiency, Vπ L, improves as the device size shrinks down to the optimal bend radius, contrary to conventional index-shift based approaches where Vπ L remains constant. We demonstrate that this approach is capable of ultra-low power tuning across a full FSR in a low-confinement silicon nitride based ring resonator of 580 µm radius. We demonstrate record performance with VFSR = 16 V, Vπ L = 3.6 V dB, Vπ Lα = 1.1 V dB, tuning current below 10 nA, and unattenuated tuning response up to 1 MHz. We also present optimized designs for high confinement silicon nitride and silicon based platforms with radius down to 80 µm and 45 µm, respectively, with performance well beyond current state-of-the-art. Applications include narrow-linewidth tunable diode lasers for spectroscopy and non-linear optics, optical phased array beamforming networks for RF antennas and LIDAR, and optical filters for WDM telecommunication links.