Electrical Conductivity of Subsurface Ocean Analogue Solutions from Molecular Dynamics Simulations.

Investigating the habitability of ocean worlds is a priority of current and future NASA missions. The Europa Clipper mission will conduct approximately 50 flybys of Jupiter's moon Europa, returning a detailed portrait of its interior from the synthesis of data from its instrument suite. The magnetometer on board has the capability of decoupling Europa's induced magnetic field to high precision, and when these data are inverted, the electrical conductivity profile from the electrically conducting subsurface salty ocean may be constrained. To optimize the interpretation of magnetic induction data near ocean worlds and constrain salinity from electrical conductivity, accurate laboratory electrical conductivity data are needed under the conditions expected in their subsurface oceans. At the high-pressure, low-temperature (HPLT) conditions of icy worlds, comprehensive conductivity data sets are sparse or absent from either laboratory data or simulations. We conducted molecular dynamics simulations of candidate ocean compositions of aqueous NaCl under HPLT conditions at multiple concentrations. Our results predict electrical conductivity as a function of temperature, pressure, and composition, showing a decrease in conductivity as the pressure increases deeper into the interior of an icy moon. These data can guide laboratory experiments at conditions relevant to icy moons and can be used in tandem to forward-model the magnetic induction signals at ocean worlds and compare with future spacecraft data. We discuss implications for the Europa Clipper mission.

Low-Temperature Specific Heat Capacity of Water-Ammonia Mixtures Down to the Eutectic.

Robust thermodynamic data are essential for the development of geodynamic and geochemical models of ocean worlds. The water-ammonia system is of interest in the study of ocean worlds due to its purported abundance in the outer solar system, geological implications, and potential importance for origins of life. In support of developing new equations of state, we conducted 1 bar specific heat capacity measurements (Cp) using a differential scanning calorimeter (DSC) at low temperatures (184-314 K) and low mass fractions of ammonia (5.2-26.9 wt %) to provide novel data in the parameter space most relevant for planetary studies. This is the first known set of data with sufficient fidelity to investigate the trend of specific heat capacity with respect to temperature. The obtained Cp in the liquid phase domain above the liquidus generally increases with temperature. Deviations of our data from the currently adopted equation of state by Tillner-Roth and Friend[Tillner-Roth R.; Friend D. G.J. Phys. Chem. Ref. Data1998, 27, 63-96]. are generally negative (ranging from +1 to -10%) and larger at lower temperatures. This result suggests that suppression of the critical behavior of supercooled water (rapid increase in specific heat with decreasing temperature) by ammonia starts at a smaller concentration than that set by Tillner-Roth and Friend.[Tillner-Roth R.; Friend D. G.J. Phys. Chem. Ref. Data1998, 27, 63-96]. Cp measurements of the liquid were also obtained in the partial melting domain between the eutectic and liquidus. This novel data set will be useful in future investigations of conditions where such partial melt may exist, such as the ice shell-ocean boundary or the interiors of ocean worlds that may contain relatively large proportions of dissolved ammonia.

On the identification of hyperhydrated sodium chloride hydrates, stable at icy moon conditions.

Sodium chloride is expected to be found on many of the surfaces of icy moons like Europa and Ganymede. However, spectral identification remains elusive as the known NaCl-bearing phases cannot match current observations, which require higher number of water of hydration. Working at relevant conditions for icy worlds, we report the characterization of three "hyperhydrated" sodium chloride (SC) hydrates, and refined two crystal structures [2NaCl·17H2O (SC8.5); NaCl·13H2O (SC13)]. We found that the dissociation of Na+ and Cl- ions within these crystal lattices allows for the high incorporation of water molecules and thus explain their hyperhydration. This finding suggests that a great diversity of hyperhydrated crystalline phases of common salts might be found at similar conditions. Thermodynamic constraints indicate that SC8.5 is stable at room pressure below 235 K, and it could be the most abundant NaCl hydrate on icy moon surfaces like Europa, Titan, Ganymede, Callisto, Enceladus, or Ceres. The finding of these hyperhydrated structures represents a major update to the H2O-NaCl phase diagram. These hyperhydrated structures provide an explanation for the mismatch between the remote observations of the surface of Europa and Ganymede and previously available data on NaCl solids. It also underlines the urgent need for mineralogical exploration and spectral data on hyperhydrates at relevant conditions to help future icy world exploration by space missions.

Liquid water on cold exo-Earths via basal melting of ice sheets.

Liquid water is a critical component of habitability. However, the production and stability of surficial liquid water can be challenging on planets outside the Habitable Zone and devoid of adequate greenhouse warming. On such cold, icy exo-Earths, basal melting of regional/global ice sheets by geothermal heat provides an alternative means of forming liquid water. Here, we model the thermophysical evolution of ice sheets to ascertain the geophysical conditions that allow liquid water to be produced and maintained at temperatures above the pressure-controlled freezing point of water ice on exo-Earths. We show that even with a modest, Moon-like geothermal heat flow, subglacial oceans of liquid water can form at the base of and within the ice sheets on exo-Earths. Furthermore, subglacial oceans may persist on exo-Earths for a prolonged period due to the billion-year half-lives of heat-producing elements responsible for geothermal heat. These subglacial oceans, often in contact with the planet's crust and shielded from the high energy radiation of their parent star by thick ice layers, may provide habitable conditions for an extended period.

Host-Guest Hydrogen Bonding in High-Pressure Acetone Clathrate Hydrates: In Situ Single-Crystal X-ray Diffraction Study.

The phenomenon of host-guest hydrogen bonding in clathrate hydrate crystal structures and its effect on physical and chemical properties have become subjects of extensive research. Hydrogen bonding has been studied for cubic (sI and sII) and hexagonal (sH) binary clathrates, while it has not been addressed for clathrate structures that exist at elevated pressures. Here, four acetone hydrate clathrates have been grown at high-pressure and low-temperature conditions. In situ single-crystal X-ray diffraction revealed that the synthesized phases possess already known trigonal (sTr), orthorhombic (sO), and tetragonal (sT) crystal structures as well as a previously unknown orthorhombic structure, so-called sO-II. Only sO and sII have previously been reported for acetone clathrates. Structural analysis suggests that acetone oxygens are hydrogen-bonded to the closest water oxygens of the host frameworks. Our discoveries show that clathrate hydrates hosting polar molecules are not as exotic as previously thought and could be stabilized at high-pressure conditions through hydrogen bonding.

Experimental and Simulation Efforts in the Astrobiological Exploration of Exooceans.

The icy satellites of Jupiter and Saturn are perhaps the most promising places in the Solar System regarding habitability. However, the potential habitable environments are hidden underneath km-thick ice shells. The discovery of Enceladus' plume by the Cassini mission has provided vital clues in our understanding of the processes occurring within the interior of exooceans. To interpret these data and to help configure instruments for future missions, controlled laboratory experiments and simulations are needed. This review aims to bring together studies and experimental designs from various scientific fields currently investigating the icy moons, including planetary sciences, chemistry, (micro-)biology, geology, glaciology, etc. This chapter provides an overview of successful in situ, in silico, and in vitro experiments, which explore different regions of interest on icy moons, i.e. a potential plume, surface, icy shell, water and brines, hydrothermal vents, and the rocky core.

SiO_{2} Glass Density to Lower-Mantle Pressures.

The convection or settling of matter in the deep Earth's interior is mostly constrained by density variations between the different reservoirs. Knowledge of the density contrast between solid and molten silicates is thus of prime importance to understand and model the dynamic behavior of the past and present Earth. SiO_{2} is the main constituent of Earth's mantle and is the reference model system for the behavior of silicate melts at high pressure. Here, we apply our recently developed x-ray absorption technique to the density of SiO_{2} glass up to 110 GPa, doubling the pressure range for such measurements. Our density data validate recent molecular dynamics simulations and are in good agreement with previous experimental studies conducted at lower pressure. Silica glass rapidly densifies up to 40 GPa, but the density trend then flattens to become asymptotic to the density of SiO_{2} minerals above 60 GPa. The density data present two discontinuities at ∼17 and ∼60 GPa that can be related to a silicon coordination increase from 4 to a mixed 5/6 coordination and from 5/6 to sixfold, respectively. SiO_{2} glass becomes denser than MgSiO_{3} glass at ∼40 GPa, and its density becomes identical to that of MgSiO_{3} glass above 80 GPa. Our results on SiO_{2} glass may suggest that a variation of SiO_{2} content in a basaltic or pyrolitic melt with pressure has at most a minor effect on the final melt density, and iron partitioning between the melts and residual solids is the predominant factor that controls melt buoyancy in the lowermost mantle.

Equations of state of ice VI and ice VII at high pressure and high temperature.

High-pressure H2O polymorphs among which ice VI and ice VII are abundant in the interiors of large icy satellites and exo-planets. Knowledge of the elastic properties of these pure H2O ices at high-temperature and high-pressure is thus crucial to decipher the internal structure of icy bodies. In this study we assess for the first time the pressure-volume-temperature (PVT) relations of both polycrystalline pure ice VI and ice VII at high pressures and temperatures from 1 to 9 GPa and 300 to 450 K, respectively, by using in situ synchrotron X-ray diffraction. The PVT data are adjusted to a second-order Birch-Murnaghan equation of state and give V0 = 14.17(2) cm(3) mol(-1), K0 = 14.05(23) GPa, and α0 = 14.6(14) × 10(-5) K(-1) for ice VI and V0 = 12.49(1) cm(3) mol(-1), K0 = 20.15(16) GPa, and α0 = 11.6(5) × 10(-5) K(-1) for ice VII.