Na/Mo co-doped PbTiO3 for photocatalytic water oxidation and Z-scheme overall water splitting under visible light.

Herein, we demonstrate a sodium/molybdenum (Na/Mo) co-doped ferroelectric PbTiO3 for efficient photocatalysis under visible light. Doped with a high concentration of Mo6+, quasi-continuous new energy levels are successfully introduced below the conduction band minimum of PbTiO3, giving rise to a band-to-band redshift of the absorption edge. The valence state difference of Mo6+ and Ti4+ in the doped PbTiO3 is compensated by the Na dopant, thus effectively suppressing the formation of the recombination centres caused by Mo4+. Combined with the intrinsic built-in electric field in PbTiO3, this Na/Mo co-doping strategy enables PbTiO3 to exhibit superior water oxidation activity under visible light with threshold wavelength up to 550 nm, which also promotes overall water splitting under visible light in a Z-scheme photocatalytic system. This strategy provides a generally applicable solution to extend the visible light absorption spectrum and engineer electronic structures of ferroelectric materials for photocatalysis and other energy conversion applications.

Liquid metal-embraced photoactive films for artificial photosynthesis.

The practical applications of solar-driven water splitting pivot on significant advances that enable scalable production of robust photoactive films. Here, we propose a proof-of-concept for fabricating robust photoactive films by a particle-implanting technique (PiP) which embeds semiconductor photoabsorbers in the liquid metal. The strong semiconductor/metal interaction enables resulting films efficient collection of photogenerated charges and superior photoactivity. A photoanode of liquid-metal embraced BiVO4 can stably operate over 120 h and retain ~ 70% of activity when scaled from 1 to 64 cm2. Furthermore, a Z-scheme photocatalyst film of liquid-metal embraced BiVO4 and Rh-doped SrTiO3 particles can drive overall water splitting under visible light, delivering an activity 2.9 times higher than that of the control film with gold support and a 110 h stability. These results demonstrate the advantages of the PiP technique in constructing robust and efficient photoactive films for artificial photosynthesis.

Enhanced oxidation of organic pollutants by regulating the interior reaction region of reactive electrochemical membranes.

Reactive electrochemical membrane (REM) emerges as an attractive strategy for the elimination of refractory organic pollutants that exist in wastewater. However, the limited reaction sites in traditional REMs greatly hinder its practical application. Herein, a feed-through coating methodology was developed to realize the uniform loading of SnO2-Sb catalysts on the interior surface of a REM. The uniformly coated REM (Unif-REM) exhibited 2.4 times higher reaction kinetics (0.29 min-1) than that of surface coated REM (Surf-REM) for the degradation of 2 mM 4-chlorophenol (4-CP), rendering an energy consumption as low as 0.016 kWh gTOC-1. The fast degradation of various emerging contaminants, e.g., sulfamethoxazole (SMX), ofloxacin (OFLX), and tetracycline (TC), also confirms its superior oxidation capability. Besides, the Unif-REM exhibited good performance in generating hydroxyl radicals (•OH) and a relatively long service lifetime. The simulation of spatial current distribution demonstrates that the interior reaction region in the Unif-REM channels can be drastically extended, thereby maximizing the surface coupling of mass diffusion and electron transfer. This study offers an in-depth look at the spatially confined reactions in REM and provides a reference for the design of electrochemical systems with economically efficient water purification.

Gradient tungsten-doped Bi3TiNbO9 ferroelectric photocatalysts with additional built-in electric field for efficient overall water splitting.

Bi3TiNbO9, a layered ferroelectric photocatalyst, exhibits great potential for overall water splitting through efficient intralayer separation of photogenerated carriers motivated by a depolarization field along the in-plane a-axis. However, the poor interlayer transport of carriers along the out-of-plane c-axis, caused by the significant potential barrier between layers, leads to a high probability of carrier recombination and consequently results in low photocatalytic activity. Here, we have developed an efficient photocatalyst consisting of Bi3TiNbO9 nanosheets with a gradient tungsten (W) doping along the c-axis. This results in the generation of an additional electric field along the c-axis and simultaneously enhances the magnitude of depolarization field within the layers along the a-axis due to strengthened structural distortion. The combination of the built-in field along the c-axis and polarization along the a-axis can effectively facilitate the anisotropic migration of photogenerated electrons and holes to the basal {001} surface and lateral {110} surface of the nanosheets, respectively, enabling desirable spatial separation of carriers. Hence, the W-doped Bi3TiNbO9 ferroelectric photocatalyst with Rh/Cr2O3 cocatalyst achieves an efficient and durable overall water splitting feature, thereby providing an effective pathway for designing excellent layered ferroelectric photocatalysts.

Unveiling the spatially confined oxidation processes in reactive electrochemical membranes.

Electrocatalytic oxidation offers opportunities for sustainable environmental remediation, but it is often hampered by the slow mass transfer and short lives of electro-generated radicals. Here, we achieve a four times higher kinetic constant (18.9 min-1) for the oxidation of 4-chlorophenol on the reactive electrochemical membrane by reducing the pore size from 105 to 7 µm, with the predominate mechanism shifting from hydroxyl radical oxidation to direct electron transfer. More interestingly, such an enhancement effect is largely dependent on the molecular structure and its sensitivity to the direct electron transfer process. The spatial distributions of reactant and hydroxyl radicals are visualized via multiphysics simulation, revealing the compressed diffusion layer and restricted hydroxyl radical generation in the microchannels. This study demonstrates that both the reaction kinetics and the electron transfer pathway can be effectively regulated by the spatial confinement effect, which sheds light on the design of cost-effective electrochemical platforms for water purification and chemical synthesis.

Selective Exposure of Robust Perovskite Layer of Aurivillius-Type Compounds for Stable Photocatalytic Overall Water Splitting.

Aurivillius-type compounds ((Bi2 O2 )2+ (An -1 Bn O3 n +1 )2- ) with alternately stacked layers of bismuth oxide (Bi2 O2 )2+ and perovskite (An -1 Bn O3 n +1 )2- are promising photocatalysts for overall water splitting due to their suitable band structures and adjustable layered characteristics. However, the self-reduction of Bi3+ at the top (Bi2 O2 )2+ layers induced by photogenerated electrons during photocatalytic processes causes inactivation of the compounds as photocatalysts. Here, using Bi3 TiNbO9 as a model photocatalyst, its surface termination is modulated by acid etching, which well suppresses the self-corrosion phenomenon. A combination of comprehensive experimental investigations together with theoretical calculations reveals the transition of the material surface from the self-reduction-sensitive (Bi2 O2 )2+ layer to the robust (BiTiNbO7 )2- perovskite layer, enabling effective electron transfer through surface trapping and effective hole transfer through surface electric field, and also efficient transfer of the electrons to the cocatalyst for greatly enhanced photocatalytic overall water splitting. Moreover, this facile modification strategy can be readily extended to other Aurivillius compounds (e.g., SrBi2 Nb2 O9 , Bi4 Ti3 O12 , and SrBi4 Ti4 O15 ) and therefore justify its usefulness in rationally tailoring surface structures of layered photocatalysts for high photocatalytic overall water-splitting activity and stability.

Perovskite Oxynitride Solid Solutions of LaTaON2-CaTaO2N with Greatly Enhanced Photogenerated Charge Separation for Solar-Driven Overall Water Splitting.

The search for solar-driven photocatalysts for overall water splitting has been actively pursued. Although metal oxynitrides with metal d0/d10-closed shell configuration are very promising candidates in terms of their visible light absorption, they usually suffer from serious photo-generated charge recombination and thus, little photoactivity. Here, by forming their solid solutions of LaTaON2 and CaTaO2N, which are traditionally considered to be inorganic yellow-red pigments but have poor photocatalytic activity, a class of promising solar-driven photocatalysts La1- x Ca x TaO1+yN2- y (0 ≤ x, y ≤ 1) are explored. In particular, the optimal photocatalyst with x = 0.9 has the ability of realizing overall water splitting with stoichiometric H2/O2 ratio under the illumination of both AM1.5 simulated solar light and visible light. The modulated key parameters including band structure, Ta bonding environment, defects concentration, and band edge alignments revealed in La0.1Ca0.9TaO1+ y N2- y have substantially promoted the separation of photogenerated charge carriers with sufficient energetics for water oxidation and reduction reactions. The results obtained in this study provide an important candidate for designing efficient solar-driven photocatalysts for overall water splitting.

An integrated thermoelectric-assisted photoelectrochemical system to boost water splitting.

Common solar-driven photoelectrochemical (PEC) cells for water splitting were designed by using semiconducting photoactive materials as working photoelectrodes to capture sunlight. Due to the thermodynamic requirement of 1.23 eV and kinetic energy loss of about 0.6 eV, a photo-voltage of 1.8 V produced by PEC cells is generally required for spontaneous water splitting. Therefore, the minimum bandgap of 1.8 eV is demanded for photoactive materials in single-photoelectrode PEC cells, and the bandgap of about 1 eV for back photoactive materials is appropriate in tandem PEC cells. All these PEC cells cannot effectively utilize the infrared light from 1250 to 2500 nm. In order to realize the full spectrum utilization of solar light, here, we develop a solar-driven PEC water splitting system integrated with a thermoelectric device. The key feature of this system is that the thermoelectric device produces a voltage as an additional bias for the PEC system by using the temperature difference between the incident infrared-light heated aqueous electrolyte in the PEC cell as the hot source and unirradiated external water as the cold source. Compared to a reference PEC system without the thermoelectric device, this system has a significantly improved overall water splitting activity of 1.6 times and may provide a strategy for accelerating the application of full spectrum solar light-driven PEC cells for hydrogen production.

Unique physicochemical properties of two-dimensional light absorbers facilitating photocatalysis.

The emergence of two-dimensional (2D) materials with a large lateral size and extremely small thickness has significantly changed the development of many research areas by producing a variety of unusual physicochemical properties. Semiconductor photocatalysis is intrinsically controlled by multiple light-matter, light absorber-cocatalyst and molecular/ionic-matter interactions that can be highly dependent on the geometric features of the light absorber. In this review, we focus on the unique structures and unusual physicochemical properties of 2D semiconducting light absorbers and their roles in facilitating photocatalysis. In particular, we highlight their structure-property relationships considering the unique electronic structure, optical absorption, spatial separation of charge carriers, structural advantages as a host of active guests, and the strain-modulated band structures of the 2D light absorbers. The representative development of a number of 2D light absorbers with structural/compositional features such as nonporous and porous structures, heteroatom/defect modification and manufactured hybrid structures for photocatalysis are discussed in detail. We conclude with a discussion of some key challenges and future directions for the development of 2D photocatalysts for efficient solar energy conversion.

Selective Breaking of Hydrogen Bonds of Layered Carbon Nitride for Visible Light Photocatalysis.

Selective breaking of the hydrogen bonds of graphitic carbon nitride can introduce favorable features, including increased band tails close to the band edges and the creation of abundant pores. These features can simultaneously improve the three basic processes of photocatalysis. As a consequence, the photocatalytic hydrogen-generation activity of carbon nitride under visible light is drastically increased by tens of times.

An Amorphous Carbon Nitride Photocatalyst with Greatly Extended Visible-Light-Responsive Range for Photocatalytic Hydrogen Generation.

Amorphous carbon nitride (ACN) with a bandgap of 1.90 eV shows an order of magnitude higher photocatalytic activity in hydrogen evolution under visible light than partially crystalline graphitic carbon nitride with a bandgap of 2.82 eV. ACN is photocatalytically active under visible light at a wavelength beyond 600 nm.