Development of antibacterial dual-cure dental resin composites via tetrapod-shaped zinc oxide incorporation.

OBJECTIVES: This study aimed to evaluate the effects of incorporating the 0-20 wt% tetrapod-shaped zinc oxide (tZnO) whiskers on the mechanical, antibacterial, and cytotoxic properties exhibited by experimental dual-cure resin composites. METHODS: Commercially obtained tZnO whiskers underwent surface modification using 3-methacryloxypropyltrimethoxysilane (γ-MPS). Subsequently, four groups of resin composites containing 0, 5, 10, and 20 wt% silanized tZnO along with barium borosilicate glass (BaBSG) fillers were fabricated while maintaining total filler loading at 60 wt%. Mechanical properties were examined utilizing specimens produced adhering to ISO 4049:2019 guidelines where applicable. Depth of cure was quantified immediately, while three-point flexural strength, flexural modulus, fracture toughness, Vickers hardness, compressive strength, and diametral tensile strength were assessed after 24 h of storage in 37 °C distilled water. Planktonic bacteria of Streptococcus mutans (S. mutans) were cultured and tested for antibacterial activity using disk diffusion and microbial anti-adhesion assays. Cytotoxicity was examined by preparing extracts from specimens in a cell culture medium and exposing stem cells from human exfoliated deciduous teeth (SHED) to serial dilutions of these extracts, then assessing cell viability and survival using CCK-8 assay and live/dead staining. RESULTS: Elevating tZnO loading yielded significant reductions in depth of cure, compressive (from 296.4 to 254.6 MPa), and diametral tensile strength (from 42.7 to 31.0 MPa), while flexural strength (91.3-94.1 MPa), flexural modulus (6.4-6.6 GPa), fracture toughness (0.96-1.04 MPa·m0.5), and Vickers hardness (36.5-37.4 kgf·mm-2) remained the same. Composites integrating tZnO displayed markedly enhanced antibacterial activity against S. mutans, based on anti-adhesion tests and live/dead staining. No cytotoxicity was observed for SHED treated with extracts from resin composites possessing up to 20 wt% tZnO whiskers. SIGNIFICANCE: This study demonstrates that incorporating up to 20 wt% silanized tZnO in place of traditional barium glass particles appreciably enhances dual-cure resin composite antibacterial function against S. mutans without compromising mechanical properties.

Cereblon deficiency ameliorates carbon tetrachloride-induced acute hepatotoxicity in HepG2 cells by suppressing MAPK-mediated apoptosis.

The liver is vulnerable to various hepatotoxins, including carbon tetrachloride (CCl4), which induces oxidative stress and apoptosis by producing reactive oxygen species (ROS) and activating the mitogen-activated protein kinase (MAPK) pathway. Cereblon (CRBN), a multifunctional protein implicated in various cellular processes, functions in the pathogenesis of various diseases; however, its function in liver injury remains unknown. We established a CRBN-knockout (KO) HepG2 cell line and examined its effect on CCl4-induced hepatocellular damage. CRBN-KO cells exhibited reduced sensitivity to CCl4-induced cytotoxicity, as evidenced by decreased levels of apoptosis markers, such as cleaved caspase-3, and aspartate aminotransferase (AST) and alanine aminotransferase (ALT) activities. CRBN deficiency enhanced antioxidant defense, with increased superoxide dismutase activity and glutathione ratios (GSH/GSSG), as well as reduced pro-inflammatory cytokine expression. Mechanistically, the protective effects of CRBN deficiency appeared to involve the attenuation of the MAPK-mediated pathways, particularly through decreased phosphorylation of JNK and ERK. Overall, these results suggest the crucial role of CRBN in mediating the hepatocellular response to oxidative stress and inflammation triggered by CCl4 exposure, offering potential clinical implications for liver injury in a wide range of liver diseases.

Comparing underwater endoscopic submucosal dissection and conventional endoscopic submucosal dissection for large laterally spreading tumor: a randomized controlled trial.

BACKGROUND AND AIMS: Colorectal endoscopic submucosal dissection (ESD) is challenging despite its usefulness. Underwater ESD (UESD) provides better traction and a clearer view of the submucosal layer than conventional ESD (CESD). This study compared the efficiency of UESD and CESD for large (20-50 mm) laterally spreading tumor (LST). METHODS: Preplanned sample size was calculated from our previous experience. As a results, 28 patients were required to UESD group or CESD group, respectively. The primary outcome was total procedure time while the secondary outcome was dissection speed. RESULTS: Fifty-six patients were enrolled and a total of 28 patients were assigned to each group. The mean size of LST was 31.6 mm and 31.3 mm in the UESD and CESD group, respectively. Fibrosis was observed in 67.9% and 60.7% patients in the UESD and CESD group. Total procedure time (mean [SD]) for the UESD group was significantly shorter than that for the CESD group, respectively (49.5 minutes [20.3] vs 75.7 minutes [36.1]; mean difference, -26.2 minutes; 95% CI, -42.0 to -10.5). Dissection speed of the UESD group was significantly faster than that of the CESD group (21.9 mm2/min [6.9] vs 15.2 mm2/min [7.3]; mean difference, 6.7 mm2/minutes; 95% CI, 2.8-10.4). There was no difference between groups in the R0 resection rate or en bloc resection rate. No perforations were observed in either group. CONCLUSIONS: UESD was superior to CESD in total procedure time and dissection speed. UESD can be recommended as the preferred method for the resection of large LST.

Neural Tissue-Like, not Supraphysiological, Electrical Conductivity Stimulates Neuronal Lineage Specification through Calcium Signaling and Epigenetic Modification.

Electrical conductivity is a pivotal biophysical factor for neural interfaces, though optimal values remain controversial due to challenges isolating this cue. To address this issue, conductive substrates made of carbon nanotubes and graphene oxide nanoribbons, exhibiting a spectrum of conductivities from 0.02 to 3.2 S m-1, while controlling other surface properties is designed. The focus is to ascertain whether varying conductivity in isolation has any discernable impact on neural lineage specification. Remarkably, neural-tissue-like low conductivity (0.02-0.1 S m-1) prompted neural stem/progenitor cells to exhibit a greater propensity toward neuronal lineage specification (neurons and oligodendrocytes, not astrocytes) compared to high supraphysiological conductivity (3.2 S m-1). High conductivity instigated the apoptotic process, characterized by increased apoptotic fraction and decreased neurogenic morphological features, primarily due to calcium overload. Conversely, cells exposed to physiological conductivity displayed epigenetic changes, specifically increased chromatin openness with H3acetylation (H3ac) and neurogenic-transcription-factor activation, along with a more balanced intracellular calcium response. The pharmacological inhibition of H3ac further supported the idea that such epigenetic changes might play a key role in driving neuronal specification in response to neural-tissue-like, not supraphysiological, conductive cues. These findings underscore the necessity of optimal conductivity when designing neural interfaces and scaffolds to stimulate neuronal differentiation and facilitate the repair process.

Prediction of the bone volume for sinus augmentation through 3-dimensional analysis.

Background/purpose: No consensus has been established regarding the exact amount of bone grafting in maxillary sinus augmentation. The aim of this study was to estimate the minimum bone volume for sinus augmentation and to investigate the factors that influence the augmentation volume (AV). Materials and methods: This study included patients with cone-beam computed tomography scanning. Dome-shaped sinus augmentation was performed virtually at vertical heights (VH) of 3, 5, 7, and 9 mm in Group A (without implantation) and Group B (with implantation). The augmentation angle (AA) and the sinus width (SW) were measured. The AV was measured using the three-dimensional image processing program 3D Slicer. Univariable and multivariable analyses were conducted. Results: This study included 30 patients (120 subjects). In Group A, the mean AVs were 0.062, 0.271, 0.642, and 1.287 cc at VHs of 3, 5, 7, and 9 mm, respectively, in Group B, the mean AVs were 0.037, 0.230, 0.594, and 1.230 cc. Univariable analysis indicated that factors significantly associated with the AV in both groups included SW, AA, and VH (P < 0.001). Multivariable analysis indicated that factors significantly associated with the AV in both groups included AA and VH (P < 0.01). Conclusion: Clinicians can predict the bone volume for sinus augmentation by measuring the augmentation height and angle.

Neurodegenerative pathways and metabolic changes in the hippocampus and cortex of mice exposed to urban particulate matter: Insights from an integrated interactome analysis.

Recently, urban particulate matter (UPM) exposure has been associated with the development of brain disorders. This study uses bioinformatic analyses to elucidate the molecular unexplored mechanisms underlying the effects of UPM exposure on the brain. Mice are exposed to UPM (from 3 days to 20 weeks), and their behavioral patterns measured. We measure pathology and gene expression in the hippocampus and cortical regions of the brain. An integrated interactome of genes is established, which enriches information on metabolic processes. Using this network, we isolate the core genes that are differentially expressed in the samples. We observe cognitive loss and pathological changes in the brains of mice at 16 or 20 weeks of exposure. Through network analysis of core-differential genes and measurement of pathway activity, we identify differences in the response to UPM exposure between the hippocampus and cortex. However, neurodegenerative disease pathways are implicated in both tissues following short-term exposure to UPM. There were also significant changes in metabolic function in both tissues depending on UPM exposure time. Additionally, the cortex of UPM-exposed mice shows more similarities with psychiatric disorders than with neurodegenerative diseases. The connectivity map database is used to isolate genes contributing to changes in expression due to UPM exposure. New approaches for inhibiting or preventing the brain damage caused by UPM exposure can be developed by targeting the functions and selected genes identified in this study.

Qualitative Analysis of Nitrogen and Sulfur Compounds in Vacuum Gas Oils via Matrix-Assisted Laser Desorption Ionization Time of Flight Mass Spectrometry.

Analysis of the heavy fractions in crude oil has been important in petroleum industries. It is well known that heavy fractions such as vacuum gas oils (VGOs) include heteroatoms, of which sulfur and nitrogen are often characterized in many cases. We conducted research regarding the molecular species analysis of VGOs. Further refine processes using VGOs are becoming important when considering carbon recycling. In this work, we attempted to classify compounds within VGOs provided by Kuwait Institute for Scientific Research. Two VGOs were priorly distillated from Kuwait Export crude and Lower Fars crude. Quantitative analysis was performed mainly using matrix-assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOFMS). MALDI-TOF-MS has been developed for analyzing high-molecular-weight compounds such as polymer and biopolymers. As matrix selection is one of the most important aspects in MALDI-TOFMS, the careful selection of a matrix was firstly evaluated, followed by analysis using a Kendrick plot with nominal mass series (z*). The objective was to evaluate if this work could provide an effective classification of VGOs compounds. The Kendrick plot is a well-known method for processing mass data. The difference in the Kendrick mass defect (KMD) between CnH2n-14S and CnH2n-20O is only 0.0005 mass units, which makes it difficult in general to distinguish these compounds. However, since the z* value showed effective differences during the classification of these compounds, qualitative analysis could be possible. The analysis using nominal mass series showed the potential to be used as an effective method in analyzing heavy fractions.

Non-clinical safety assessment of Annona atemoya leaf extract: evaluation of genotoxicity.

The leaves, stems, and fruits of Annona atemoya (A. atemoya; AA), a fruit-bearing plant of the family Annonaceae, exhibit anti-angiogenic, anti-oxidative, anti-inflammatory, and neuroprotective activities. However, the safety of AA has not been comprehensively elucidated. In this study, we evaluated the potential genotoxicity of an AA leaf (AAL) ethanol extract using a standard three-test battery constituting in vitro mammalian chromosomal aberration, in vivo micronucleus, and bacterial reverse mutation (also known as the Ames test) tests, as recommended by the Ministry of Food and Drug Safety of Korea. In vitro chromosomal aberration assay revealed that AAL extract did not induce structural or numerical aberrations, with or without metabolic activation (S9). In vivo micronucleus assay revealed that the number of micronucleated polychromatic erythrocytes (PCEs) and the PCE/normochromatic erythrocyte ratio after AAL extract treatment were not substantially different from those in the negative control. Changes in body weight and mortality were not observed. However, AAL extract partially induced mutagenic activity in all three bacterial strains in the bacterial reverse mutation assay, indicating that it could potentially aid in determining the genotoxic safety of AAL. QuantSeq 3' mRNA sequencing analysis to elucidate the genotoxicity mechanisms of AAL extract using TK6 cells revealed that the genotoxic effects of AAL may be associated with cellular morphology-associated (cell development and keratinization), nucleotide metabolism, and electron transport chain functions. Supplementary Information: The online version contains supplementary material available at 10.1007/s43188-024-00241-4.

Analytical method development and dermal absorption of gallic acid, a hair dye ingredient.

Gallic acid (GA) is a phenolic compound known as 3,4,5-trihydroxybenzoic acid. GA is used as a hair dye ingredient. It is limited to be below 4.0% in Korea. Dermal absorption rate of GA has not been reported yet. In this study, an analytical method for GA was developed and validated using high-performance liquid chromatography (HPLC) in various matrices of swab, stratum corneum (SC), skin (dermis + epidermis), and receptor fluid (RF). HPLC analysis showed acceptable linearity (r2 = 0.999-0.9998), accuracy (90.3-112.8%), and precision (0.7-13.6%) in accordance with validation guidelines by Korea Ministry of Food and Drug Safety (MFDS). The dermal absorption rate of GA was determined using Franz diffuse cells. GA (4.0%) was applied to mini pig skin of 10 µl/cm2. After 30 min application, the GA was wiped out and receptor fluid sampling was continued until 24 h. After 24 h, skin was wiped off with swab and SC was collected using tape stripping. All samples were extracted with ethanol and analyzed using the validated method. The total dermal absorption rate of GA was determined to be 2.6 ± 1.3% (24 h).

Correlation of LLT-1 and NLRC4 inflammasome and its effect on glioblastoma prognosis.

PURPOSE: LLT-1 is a well-known ligand for the natural killer (NK) cell inhibitory receptor NKRP1A. Here, we examined NLRC4 inflammasome components and LLT-1 expression in glioblastoma (GBM) tissues to elucidate potential associations and interactions between these factors. METHODS: GBM tissues were collected for RNA sequencing (RNA-seq) and Immunofluorescent experiments. Colocalization of LLT-1 and other proteins was assessed by immunofluorescence. Computational analyses utilized RNA-seq data from 296 to 52 patients from the Chinese Glioma Genome Atlas and CHA medical records, respectively. These data were subjected to survival, non-negative matrix factorization clustering, Gene Ontology enrichment, and protein-protein interaction analyses. Receptor-ligand interactions between tumor and immune cells were confirmed by single-cell RNA-seq analysis. RESULTS: In GBM tissues, LLT-1 was predominantly colocalized with glial fibrillary acidic protein (GFAP)-expressing astrocytes, but not with microglial markers like Iba-1. Additionally, LLT-1 and activated NLRC4 inflammasomes were mainly co-expressed in intratumoral astrocytes, suggesting an association between LLT-1, NLRC4, and glioma malignancy. High LLT-1 expression correlates with poor prognosis, particularly in the mesenchymal subtype, and is associated with TNF and NOD-like receptor signaling pathway enrichment, indicating a potential role in tumor inflammation and progression. At the single-cell level, mesenchymal-like malignant cells showed high NF, NLR, and IL-1 signaling pathway enrichment compared to other malignant cell types. CONCLUSION: We revealed an association between NLRC4 inflammasome activity and LLT-1 expression, suggesting a novel regulatory pathway involving TNF, inflammasomes, and IL-1, potentially offering new NK-cell-mediated anti-glioma approaches.

Analytical Method Development and Dermal Absorption of 4-Amino-3-Nitrophenol (4A3NP), a Hair Dye Ingredient under the Oxidative or Non-Oxidative Condition.

The chemical 4-amino-3-nitrophenol (4A3NP) is classified as an amino nitrophenol and is primarily utilized as an ingredient in hair dye colorants. In Korea and Europe, it is exclusively used in non-oxidative or oxidative hair dye formulations, with maximum allowable concentrations of 1% and 1.5%, respectively. Despite this widespread use, risk assessment of 4A3NP has not been completed due to the lack of proper dermal absorption data. Therefore, in this study, both the analytical method validation and in vitro dermal absorption study of 4A3NP were conducted following the guidelines provided by the Korea Ministry of Food and Drug Safety (MFDS). Before proceeding with the dermal absorption study, analytical methods were developed for the quantitation of 4A3NP through multiple reaction monitoring (MRM) via liquid chromatography-mass spectrometry (LC-MS) in various matrices, including swab wash (WASH), stratum corneum (SC), skin (SKIN, comprising the dermis and epidermis), and receptor fluid (RF). These developed methods demonstrated excellent linearity (R2 = 0.9962-0.9993), accuracy (93.5-111.73%), and precision (1.7-14.46%) in accordance with the validation guidelines.The dermal absorption of 4A3NP was determined using Franz diffusion cells with mini-pig skin as the barrier. Under both non-oxidative and oxidative (6% hydrogen peroxide (H2O2): water, 1:1) hair dye conditions, 1% and 1.5% concentrations of 4A3NP were applied to the skin at a rate of 10 µL/cm2, respectively. The total dermal absorption rates of 4A3NP under non-oxidative (1%) and oxidative (1.5%) conditions were determined to be 5.62 ± 2.19% (5.62 ± 2.19 µg/cm2) and 2.83 ± 1.48% (4.24 ± 2.21 µg/cm2), respectively.

Effectiveness of the triptorelin stimulation test compared with the classic gonadotropin-releasing hormone stimulation test in diagnosing central precocious puberty in girls.

PURPOSE: The gonadotropin-releasing hormone (GnRH) stimulation test is the gold standard for diagnosing central precocious puberty (CPP). Gonadorelin (Relefact) is used for the test but is not always readily available; triptorelin is used as an alternative. The purpose of this study was to evaluate the diagnostic validity of the triptorelin test compared with the GnRH test in the diagnosis of CPP in girls. METHODS: This retrospective study included 100 girls with premature thelarche (PT) who underwent a hypothalamic-pituitary-gonadal axis evaluation. In the overall group, 50 girls were tested with intravenous gonadorelin (Relefact) and 50 girls were tested with subcutaneous triptorelin acetate (Decapeptyl). Luteinizing hormone (LH) and follicle-stimulating hormone levels were measured at baseline and 30, 45, 60, and 90 minutes after gonadorelin injection or 30, 60, 90, and 120 minutes after triptorelin injection. RESULTS: Clinical characteristics of age, height, weight, body mass index, and bone age were similar between the 2 groups. The highest LH level was reached 60 minutes after stimulation in both groups. Approximately 20% of the gonadorelin group and 24% of the triptorelin group were diagnosed with CPP (P=0.52). Among those diagnosed with CPP, the mean peak LH concentrations were 8.15 mIU/mL and 9.73 mIU/mL in the gonadorelin and triptorelin groups, respectively. CONCLUSION: The triptorelin test showed similar trends of LH elevation and diagnostic rate compared with the traditional GnRH test for diagnosing CPP. This suggests that the triptorelin test may be a valid alternative to the GnRH test for differentiating CPP from self-limiting PT. Our study also demonstrated that a triptorelin stimulation test for up to 120 minutes was sufficient to diagnose CPP.

Delivery-mediated exosomal therapeutics in ischemia-reperfusion injury: advances, mechanisms, and future directions.

Ischemia-reperfusion injury (IRI) poses significant challenges across various organ systems, including the heart, brain, and kidneys. Exosomes have shown great potentials and applications in mitigating IRI-induced cell and tissue damage through modulating inflammatory responses, enhancing angiogenesis, and promoting tissue repair. Despite these advances, a more systematic understanding of exosomes from different sources and their biotransport is critical for optimizing therapeutic efficacy and accelerating the clinical adoption of exosomes for IRI therapies. Therefore, this review article overviews the administration routes of exosomes from different sources, such as mesenchymal stem cells and other somatic cells, in the context of IRI treatment. Furthermore, this article covers how the delivered exosomes modulate molecular pathways of recipient cells, aiding in the prevention of cell death and the promotions of regeneration in IRI models. In the end, this article discusses the ongoing research efforts and propose future research directions of exosome-based therapies.

Hierarchically porous surface of HA-sandblasted Ti implant screw using the plasma electrolytic oxidation: Physical characterization and biological responses.

The surface topological features of bioimplants are among the key indicators for bone tissue replacement because they directly affect cell morphology, adhesion, proliferation, and differentiation. In this study, we investigated the physical, electrochemical, and biological responses of sandblasted titanium (SB-Ti) surfaces with pore geometries fabricated using a plasma electrolytic oxidation (PEO) process. The PEO treatment was conducted at an applied voltage of 280 V in a solution bath consisting of 0.15 mol L-1 calcium acetate monohydrate and 0.02 mol L-1 calcium glycerophosphate for 3 min. The surface chemistry, wettability, mechanical properties and corrosion behavior of PEO-treated sandblasted Ti implants using hydroxyapatite particles (PEO-SB-Ti) were improved with the distribution of calcium phosphorous porous oxide layers, and showed a homogeneous and hierarchically porous surface with clusters of nanopores in a bath containing calcium acetate monohydrate and calcium glycerophosphate. To demonstrate the efficacy of PEO-SB-Ti, we investigated whether the implant affects biological responses. The proposed PEO-SB-Ti were evaluated with the aim of obtaining a multifunctional bone replacement model that could efficiently induce osteogenic differentiation as well as antibacterial activities. These physical and biological responses suggest that the PEO-SB-Ti may have a great potential for use an artificial bone replacement compared to that of the controls.

Fibroblast function recovery through rejuvenation effect of nanovesicles extracted from human adipose-derived stem cells irradiated with red light.

Fibroblasts (hDFs) are widely employed for skin regeneration and the treatment of various skin disorders, yet research were rarely investigated about restoration of diminished therapeutic efficacy due to cell senescence. The application of stem cell and stem cell-derived materials, exosomes, were drawn attention for the restoration functionality of fibroblasts, but still have limitation for unintended side effect or low yield. To advance, stem cell-derived nanovesicle (NV) have developed for effective therapeutic reagents with high yield and low risk. In this study, we have developed a method using red light irradiated human adipose-derived stem cells (hADSCs) derived NV (R-NVs) for enhancing the therapeutic efficacy and rejuvenating hDFs. Through red light irradiation, we were able to significantly increase the content of stemness factors and angiogenic biomolecules in R-NVs. Treatment with these R-NVs was found to enhance the migration ability and leading to rejuvenation of old hDFs to levels similar to those of young hDFs. In subsequent in vivo experiments, the treatment of old hDFs with R-NVs demonstrated a superior skin wound healing effect, surpassing that of young hDFs. In summary, this study successfully induced rejuvenation and leading to increased therapeutic efficacy to R-NVs treated old hDFs previously considered as biowaste.

Redundant role of OsCNGC4 and OsCNGC5 encoding cyclic nucleotide-gated channels in rice pollen germination and tube growth.

In staple crops, such as rice (Oryza sativa L.), pollen plays a crucial role in seed production. However, the molecular mechanisms underlying rice pollen germination and tube growth remain underexplored. Notably, we recently uncovered the redundant expression and mutual interaction of two rice genes encoding cyclic nucleotide-gated channels (CNGCs), OsCNGC4 and OsCNGC5, in mature pollen. Building on these findings, the current study focused on clarifying the functional roles of these two genes in pollen germination and tube growth. To overcome functional redundancy, we produced gene-edited rice plants with mutations in both genes using the CRISPR-Cas9 system. The resulting homozygous OsCNGC4 and OsCNGC5 gene-edited mutants (oscngc4/5) exhibited significantly lower pollen germination rates than the wild type (WT), along with severely reduced fertility. Transcriptome analysis of the double oscngc4/5 mutant revealed downregulation of genes related to receptor kinases, transporters, and cell wall metabolism. To identify the direct regulators of OsCNGC4, which form a heterodimer with OsCNGC5, we screened a yeast two-hybrid library containing rice cDNAs from mature anthers. Subsequently, we identified two calmodulin isoforms (CaM1-1 and CaM1-2), NETWORKED 2 A (NET2A), and proline-rich extension-like receptor kinase 13 (PERK13) proteins as interactors of OsCNGC4, suggesting its roles in regulating Ca2+ channel activity and F-actin organization. Overall, our results suggest that OsCNGC4 and OsCNGC5 may play critical roles in pollen germination and elongation by regulating the Ca2+ gradient in growing pollen tubes.

Comparison of pain relief in soft tissue tumor excision: anesthetic injection using an automatic digital injector versus conventional injection.

BACKGROUND: The pain caused by local anesthetic injection can lead to patient anxiety prior to surgery, potentially necessitating sedation or general anesthesia during the excision procedure. In this study, we aim to compare the pain relief efficacy and safety of using a digital automatic anesthetic injector for local anesthesia. METHODS: Thirty-three patients undergoing excision of a benign soft tissue tumor under local anesthesia were prospectively enrolled from September 2021 to February 2022. A single-blind, randomized controlled study was conducted. Patients were divided into two groups by randomization: the experimental group with digital automatic anesthetic injector method (I-JECT group) and the control group with conventional injection method. Before surgery, the Amsterdam preoperative anxiety information scale was used to measure the patients' anxiety. After local anesthetic was administered, the Numeric Pain Rating Scale was used to measure the pain. The amount of anesthetic used was divided by the surface area of the lesion was recorded. RESULTS: Seventeen were assigned to the conventional group and 16 to the I-JECT group. The mean Numeric Pain Rating Scale was 1.75 in the I-JECT group and 3.82 in conventional group. The injection pain was lower in the I-JECT group (p< 0.01). The mean Amsterdam preoperative anxiety information scale was 11.00 in the I-JECT group and 9.65 in conventional group. Patient's anxiety did not correlate to injection pain regardless of the method of injection (p= 0.47). The amount of local anesthetic used per 1 cm 2 of tumor surface area was 0.74 mL/cm2 in the I-JECT group and 2.31 mL/cm2 in the conventional group. The normalization amount of local anesthetic was less in the I-JECT group (p< 0.01). There was no difference in the incidence of complications. CONCLUSION: The use of a digital automatic anesthetic injector has shown to reduce pain and the amount of local anesthetics without complication.

Mechanophysical and Anti-Adhesive Properties of a Nanoclay-Containing PMMA Denture Resin.

Poly(methyl methacrylate) (PMMA) is commonly used for dental dentures, but it has the drawback of promoting oral health risks due to oral bacterial adhesion. Recently, various nanoparticles have been incorporated into PMMA to tackle these issues. This study aims to investigate the mechanophysical and antimicrobial adhesive properties of a denture resin by incorporating of nanoclay into PMMA. Specimens were prepared by adding 0, 1, 2, and 4 wt % surface-modified nanoclay (Sigma) to self-polymerizing PMMA denture resin. These specimens were then evaluated using FTIR, TGA/DTG, and FE-SEM with EDS. Various mechanical and surface physical properties, including nanoindentation, were measured and compared with those of pure PMMA. Antiadhesion experiments were conducted by applying a Candida albicans (ATCC 11006) suspension to the surface of the specimens. The antiadhesion activity of C. albicans was confirmed through a yeast-wall component (mannan) and mRNA-seq analysis. The bulk mechanical properties of nanoclay-PMMA composites were decreased compared to those of pure PMMA, while the flexural strength and modulus met the ISO 20795-1 requirement. However, there were no significant differences in the nanoindentation hardness and elastic modulus. The surface energy revealed a significant decrease at 4 wt % nanoclay-PMMA. The antiadhesion effect of Candida albicans was evident along with nanoclay content in the nanocomposites and confirmed by the reduced attachment of mannan on nanoclay-PMMA composites. mRNA-seq analysis supported overall transcriptome changes in altering attachment and metabolism behaviors on the surface. The nanoclay-PMMA materials showed a lower surface energy as the content increased, leading to an antiadhesion effect against Candida albicans. These findings indicate that incorporating nanoclay into PMMA surfaces could be a valuable strategy for preventing the fungal biofilm formation of denture base materials.