RESUMEN
BACKGROUND: Various conservative and surgical approaches exist to treat Robin sequence (RS), but their effects on facial profile and mandibular catch-up growth are unclear. A functional treatment concept, used in our centre for 25 years, includes an individualized palatal plate with a velo-pharyngeal extension and intensive feeding training. METHODS: We performed a prospective study to objectively describe facial profiles in infants with RS treated with the above concept. Infants with isolated RS were admitted to our tertiary perinatal and national referral centre for craniofacial malformations between May 2018 and Nov 2019. Infants with RS received 3D-photographs during clinically indicated visits. Healthy controls were recruited from Dec 2018 to Sep 2019 and received 3D-photographs every 3 months. The digitally measured jaw index (JI), defined as alveolar overjet (O) x maxillary arch (U)/mandibular arch (L), and the soft tissue reference points A'-point, Nasion', B'-point angle (ANB'), describing the relative position of maxilla to mandible, were evaluated. Linear mixed models were used to examine time trajectories in JI and ANB'. RESULTS: A total of 207 3D images, obtained in 19 infants with RS and 32 controls, were analysed. JI and ANB' decreased over time in both groups [for JI - 0.18 (95% CI - 0.25 to - 0.10); for ANB': - 0.40° per month [(95% CI - 0.48 to - 0.32)]] but remained lower in controls [for JI - 2.5 (95% CI - 3.2 to - 1.8); for ANB'-1.7° (95% CI - 2.4 to - 1.0)]. Also, the ANB' model showed a significant effect of the interaction term diagnosis x age. CONCLUSIONS: Based on longitudinal 3D images, we describe changes in objective parameters of facial profile in infants with and without RS during the first year of life. Our findings indicate catch-up growth in infants treated for RS. Video Abstract.
Asunto(s)
Síndrome de Pierre Robin , Humanos , Estudios Prospectivos , Síndrome de Pierre Robin/diagnóstico por imagen , Masculino , Femenino , Lactante , Imagenología Tridimensional , Cara/anatomía & histología , Estudios de Casos y Controles , Recién NacidoRESUMEN
This study evaluates masticatory efficiency in orthodontic patients with craniofacial disorders compared to controls without, considering the effect of an orthodontic appliance and malocclusion. A total of 119 participants (7-21 years), divided into a craniofacial disorder and control group (n = 42 and n = 77; mean age 13.5 ± 5.2 and 14.2 ± 3.3 years) were included. Masticatory efficiency was evaluated using a standard food model test, where masticated test food bodies were analyzed, and parameters like particle number (n) and area (mm2) were recorded. This study newly introduced the masticatory efficiency index (MEI), which encompasses the above terms (number and area), with a high MEI being an indicator of high masticatory ability. Younger orthodontic patients with a craniofacial disorder had a significantly decreased MEI (0.50 ± 0.25 n/mm2) compared to patients without (1.10 ± 0.48 n/mm2; p = 0.02). The presence of a crossbite significantly decreased masticatory efficiency, particularly in craniofacial disorder patients (0.69 ± 1.44 n/mm2) versus controls (0.89 ± 1.00 n/mm2, p = 0.04). As treatment progressed with age and fixed appliances, mastication group differences became non-significant, suggesting that patients with a craniofacial disorder were catching up to healthy controls in the rehabilitation of their masticatory function. Considering an early diagnosis of malocclusion during orthodontic therapy in combination with speech therapy can avoid negative malocclusion effects with growth, caused by muscle imbalances.
RESUMEN
Due to dental diseases, anatomical restrictions, and mixed dentition, the reduction in the number of teeth and the displacement of tooth germs pose challenges in orthodontic treatment, limiting anchorage options. The presented case demonstrates an advanced treatment solution using digital CAD/CAM-technologies and medical imaging for the creation of a mini-implant template. A 12-year-old male patient experiencing delayed tooth eruption, multiple impacted germs, and maxillary constriction underwent intraoral scanning and CBCT. Utilizing coDiagnostiXTM Version 10.2 software, the acquired data were merged to determine the mini-implant placement and to design the template. The template was then manufactured through stereolithography using surgical-guide material. Mini-implants were inserted using the produced appliance, enabling safe insertion by avoiding vital structures. Surgically exposed displaced teeth were aligned using a Hyrax screw appliance anchored on the mini-implants for rapid palatal expansion (RPE) and subsequently used as fixed orthodontics to align impacted teeth. The screw was activated daily for 10 weeks, resulting in a 7 mm posterior and 5 mm anterior maxillary transversal increase. Skeletal anchorage facilitated simultaneous RPE and tooth alignment, ensuring accuracy, patient safety, and appliance stability. The presented case shows a scenario in which computer-aided navigation for mini-implant positioning can enhance precision and versatility in challenging anatomical cases.
RESUMEN
Obstructive sleep apnea (OSA) is caused by temporary partial or complete constriction of the upper airway during sleep which leads to reduced blood oxygen and cardiovascular risks. Main symptoms vary between adults and children leading to misdiagnosis or delayed patient identification. To improve early diagnosis, lateral cephalograms can provide craniofacial measurements associated with a higher risk of OSA. In order to identify the most relevant craniofacial measurements, a systematic literature review with meta-analysis was conducted combining the terms 'orthodontic*', 'craniofacial', 'cephalometr*', 'cephalogram', 'OSA*', 'UARS', 'SDB', 'sleep disordered breathing', 'sleep apnea' and 'sleep apnoea'. Of 3016 publications, 19 were included in the systematic review and meta-analysis, 15 with adult patients and four with children. A total of 16 measurements (six angles, 10 distances) were compared, nine showed a possible influence in patients with OSA compared to controls: NSBa angle (-0.28°), ANB angle (+0.33°), ML-NSL angle (+0.34°), Me-Go-Ar angle (+0.33°), SN distance (-0.70 mm), N-ANS distance (-0.36 mm), MP-H distance (+1.18 mm), uvula length (+1.07 mm) and thickness (+0.96 mm). Posterior airway measurements were not sufficiently described or comparably measured to be statistically analysed. There is some evidence for altered craniofacial anatomy in patients with OSA compared to controls. Lateral cephalograms should be screened for these aspects routinely to improve early diagnosis of OSA and craniofacial orthopaedics should complement the interdisciplinary treatment plan for young patients with OSA.
Asunto(s)
Síndromes de la Apnea del Sueño , Apnea Obstructiva del Sueño , Adulto , Niño , Humanos , Cefalometría , Factores de Riesgo , Síndromes de la Apnea del Sueño/complicaciones , Apnea Obstructiva del Sueño/diagnóstico , TráqueaRESUMEN
This study evaluates the masticatory efficiency in patients with craniofacial disorders (CD) compared to controls (C). A total of 119 participants (7-21 years), divided into CD group (n = 42, mean age 13.45 ± 5.2 years) and C group (n = 77, mean age 14.3 ± 3.27 years) under an orthodontic treatment were included. Masticatory efficiency was assessed using a standard food model test. The masticated food was examined according to its number of particles (n) and area (mm2), wherein a higher number of particles alongside a smaller area was an indication of better masticatory efficiency. Additionally, the influence of cleft formation, chewing side, dentition stage, age and sex were evaluated. Patients with CD chewed the standardized food in fewer particles (nCD = 61.76 vs. nC = 84.58), with a significantly higher amount of area than the controls (ACD = 192.91 mm2 vs. AC = 146.84 mm2; p = 0.04). In conclusion, patients with CD showed a significantly decreased mastication efficiency compared to healthy patients. Factors such as stage of cleft formation, chewing side, dentition stage and age showed an influence on masticatory efficiency, whereas no gender effect on the masticatory efficiency of CD patients was found.
Asunto(s)
Alimentos , Masticación , Ortodoncia , Adolescente , Niño , Humanos , EficienciaRESUMEN
BACKGROUND: To assess the long-term functional orthodontic outcome of the Tübingen palatal plate (TPP) in children with Robin sequence (RS) in comparison to age- and sex-matched healthy controls. METHODS: Between 09/2019 and 10/2020, we performed orthodontic assessments in 41 children at our Department of Orthodontics. Included were patients with RS (17 non-syndromic; four syndromic) and healthy controls (n = 22, average age in both groups 9.9 y). Facial analyses of 2D images, digital study casts and cephalometric measurements were made. RESULTS: The orthodontic examinations showed no statistically significant group differences regarding functional extraoral, intraoral and pharyngeal parameters, or in skeletal patterns. The relationship between the upper and lower incisors was significantly increased (overjet 4 (2-10) vs. 3 (0-9) mm; p = 0.01) with a significant deficit in the lower face proportions (Jaw Index 4.15 (1.9-9.6) vs. 2.98 (0-9); p = 0.02; Facial convexity angle 157 (149-173) vs. 159 (149-170); p = 0.01). CONCLUSION: Children with RS treated with the TPP showed normal long-term functional orthodontic outcomes, thanks to the functional adaption of the stomatognathic system. However, soft tissue growth did not completely match skeletal growth, resulting in a more convex facial profile.
RESUMEN
STUDY OBJECTIVES: To investigate neurocognitive and behavioral outcomes at primary school age in relation to obstructive sleep apnea (OSA) in children with Robin sequence (RS) treated with the Tuebingen palatal plate in infancy and to assess the impact of OSA in these patients. METHODS: Forty-two primary school-aged children (n = 21 with RS, n = 21 age- and sex-matched controls) underwent polysomnography, intelligence testing ("Wechsler Intelligence Scale for Children-Fifth Edition" [WISC-V]), and anthropometrics. Families completed a 7-day sleep diary and questionnaires on sleep and behavior (Children's Sleep Habits Questionnaire [CSHQ] and the Child Behavior Checklist [CBCL]). RESULTS: In children with RS (17 non-syndromic, four syndromic; median age 9.7 [8.5-10.8] years), the obstructive apnea-hypopnea index (OAHI) was significantly higher than in controls (1.3 [0.4-2.7]/h vs. 0.4 [0.1-0.6]/h). Two syndromic children with RS were already on nocturnal respiratory support for OSA prior to our study, and one non-syndromic child was diagnosed with severe OSA (OAHI 57/h) despite an unremarkable medical history and questionnaire. The overall intelligence quotient in children with RS was within the normal range and did not differ between children with RS and healthy peers (102 vs. 108, p = .05). However, children with RS had values in the at-risk clinical range for externalizing behavior. CONCLUSIONS: These children with RS showed an increased risk of OSA and behavioral problems, suggesting regular screening for OSA throughout childhood. Neurocognitive scores in children with RS were within the normal range after adequate treatment of OSA during infancy.
Asunto(s)
Síndrome de Pierre Robin , Apnea Obstructiva del Sueño , Sueño , Niño , Femenino , Humanos , Masculino , Antropometría , Conducta Infantil , Control Interno-Externo , Síndrome de Pierre Robin/complicaciones , Síndrome de Pierre Robin/psicología , Síndrome de Pierre Robin/terapia , Polisomnografía , Sueño/fisiología , Apnea Obstructiva del Sueño/complicaciones , Apnea Obstructiva del Sueño/diagnóstico , Apnea Obstructiva del Sueño/fisiopatología , Apnea Obstructiva del Sueño/terapia , Encuestas y Cuestionarios , Escalas de Wechsler , Lactante , Placas Óseas , Estudios Transversales , Cognición , Autoinforme , Lista de VerificaciónRESUMEN
Involvement of the temporomandibular joint (TMJ) is common in juvenile idiopathic arthritis (JIA). TMJ arthritis can lead to orofacial symptoms, orofacial dysfunction, and dentofacial deformity with negative impact on quality of life. Management involves interdisciplinary collaboration. No current recommendations exist to guide clinical management. We undertook this study to develop consensus-based interdisciplinary recommendations for management of orofacial manifestations of JIA, and to create a future research agenda related to management of TMJ arthritis in children with JIA. Recommendations were developed using online surveying of relevant stakeholders, systematic literature review, evidence-informed generation of recommendations during 2 consensus meetings, and Delphi study iterations involving external experts. The process included disciplines involved in the care of orofacial manifestations of JIA: pediatric rheumatology, radiology, orthodontics, oral and maxillofacial surgery, orofacial pain specialists, and pediatric dentistry. Recommendations were accepted if agreement was >80% during a final Delphi study. Three overarching management principles and 12 recommendations for interdisciplinary management of orofacial manifestations of JIA were outlined. The 12 recommendations pertained to diagnosis (n = 4), treatment of TMJ arthritis (active TMJ inflammation) (n = 2), treatment of TMJ dysfunction and symptoms (n = 3), treatment of arthritis-related dentofacial deformity (n = 2), and other aspects related to JIA (n = 1). Additionally, a future interdisciplinary research agenda was developed. These are the first interdisciplinary recommendations to guide clinical management of TMJ JIA. The 3 overarching principles and 12 recommendations fill an important gap in current clinical practice. They emphasize the importance of an interdisciplinary approach to diagnosis and management of orofacial manifestations of JIA.
Asunto(s)
Artritis Juvenil , Deformidades Dentofaciales , Trastornos de la Articulación Temporomandibular , Niño , Humanos , Artritis Juvenil/complicaciones , Artritis Juvenil/terapia , Artritis Juvenil/diagnóstico , Consenso , Calidad de Vida , Trastornos de la Articulación Temporomandibular/etiología , Trastornos de la Articulación Temporomandibular/terapiaRESUMEN
Measuring the dimensions of personalized devices can provide relevant information for the production of future such devices used in various medical specialties. Difficulties with standardizing such measurement and obtaining high accuracy, alongside cost-intensive measuring methodologies, has dampened interest in this practice. This study presents a methodology for automatized measurements of personalized medical appliances of variable shape, in this case an orthodontic appliance known as Tübingen Palatal Plate (TPP). Parameters such as length, width and angle could help to standardize and improve its future use. A semi-automatic and custom-made program, based on Rhinoceros 7 and Grasshopper, was developed to measure the device (via an extraoral scanner digital file). The program has a user interface that allows the import of the desired part, where the user is able to select the necessary landmarks. From there, the program is able to process the digital file, calculate the necessary dimensions automatically and directly export all measurements into a document for further processing. In this way, a solution for reducing the time for measuring multiple dimensions and parts while reducing human error can be achieved.
RESUMEN
OBJECTIVE: The present study evaluated the effect of different rinsing postprocessing solutions on surface characteristics, flexural strength, and cytotoxicity of an additive manufactured polymer for orthodontic appliances. These solutions have been deemed an alternative to the standard isopropanol which is a flammable liquid, known to have toxic effects. METHODS: Tested specimens were manufactured using direct light processing of an orthodontic appliance polymer (FREEPRINT® splint 2.0, Detax) and post-processed with different post-rinsing solutions, including isopropanol (IPA), ethanol (EtOH), EASY 3D Cleaner (EYC), Yellow Magic7 (YM7), and RESINAWAY (RAY), respectively. All groups were post-cured following the manufacturer's instructions. Surface topography and roughness (Ra and Rv) were evaluated. In addition, flexural strength was measured by a three-point bending test. An extract test was performed to evaluate cytotoxicity. The data were analyzed by the Kruskal-Wallis test with Dunn's multiple comparisons test (p < 0.05). RESULTS: Various post-rinsing solutions did not significantly affect the roughness values (Ra and Rv). Specimens post-processed with EtOH (98.1 ± 12.4 MPa) and EYC (101.1 ± 6.3 MPa) exhibited significantly lower flexural strength compared to the groups of IPA (110.7 ± 5.3 MPa), RAY (112.1 ± 5.6 MPa) and YM7 (117.3 ± 5.9 MPa), respectively. Finally, there were no cytotoxic effects of parts cleaned with different post-rinsing solutions. SIGNIFICANCE: Considering the use of 3D-printed orthodontic appliance materials, different rinsing postprocessing procedures did not affect surface characteristics. However, the flexural strength was significantly influenced, which could be attributed to the chemical ingredients of the post-rinsing solutions. Various post-rinsing treatments had no alternation concerning cytocompatibility.
Asunto(s)
Materiales Dentales , Resistencia Flexional , 2-Propanol , Ensayo de Materiales , Aparatos Ortodóncicos , Polímeros , Impresión Tridimensional , Propiedades de SuperficieRESUMEN
Introduction: Due to potentially severe sequelae (impaired growth, condylar resorption, and ankylosis) early diagnosis of chronic rheumatic arthritis of the temporomandibular joint (TMJ) and timely onset of therapy are essential. Aim: Owing to very limited evidence the aim of the study was to identify and discuss controversial topics in the guideline development to promote further focused research. Methods: Through a systematic literature search, 394 out of 3771 publications were included in a German interdisciplinary guideline draft. Two workgroups (1: oral and maxillofacial surgery, 2: interdisciplinary) voted on 77 recommendations/statements, in 2 independent anonymized and blinded consensus phases (Delphi process). Results: The voting results were relatively homogenous, except for a greater proportion of abstentions amongst the interdisciplinary group (p < 0.001). Eighty-four percent of recommendations/statements were approved in the first round, 89% with strong consensus. Fourteen recommendations/statements (18.2%) required a prolonged consensus phase and further discussion. Discussion: Contrast-enhanced MRI was confirmed as the method of choice for the diagnosis of TMJ arthritis. Intraarticular corticosteroid injection is to be limited to therapy-refractory cases and single injection only. In adults, alloplastic joint replacement is preferable to autologous replacement. In children/adolescents, autologous reconstruction may be performed lacking viable alternatives. Alloplastic options are currently still considered experimental.
RESUMEN
The objective of this study was to present a methodology and manufacturing workflow for non-invasive ventilation interfaces (NIV) for neonates and small infants. It aimed to procure a fast and feasible solution for personalized NIV produced in-house with the aim of improving fit and comfort for the patient. Three-dimensional scans were obtained by means of an intraoral (Trios 3) and a facial scanner (3dMd Flex System). Fusion 360 3D-modelling software was employed to automatize the design of the masks and their respective casting molds. These molds were additively manufactured by stereolithography (SLA) and fused filament fabrication (FFF) technologies. Silicone was poured into the molds to produce the medical device. In this way, patient individualized oronasal and nasal masks were produced. An automated design workflow and use of additive manufacturing enabled a fast and feasible procedure. Despite the cost for individualization likely being higher than for standard masks, a user-friendly workflow for in-house manufacturing of these medical appliances proved to have potential for improving NIV in neonates and infants, as well as increasing comfort.
RESUMEN
OBJECTIVES: We aimed to determine the neurocognitive development of cleft palate patients with and without Robin sequence (RS). MATERIALS AND METHODS: Children with isolated RS with cleft palate and children with cleft palate only (CPO) were contacted at the age of 5-6 years. All RS children had undergone initial polygraphic sleep study (PG) with a mixed-obstructive apnea index (MOAI) of ≥ 3/h and were consequently treated with the Tuebingen palatal plate. A standardized clinical examination as well as a neuropediatric and neuropsychological examination included the Wechsler Pre-school and Primary Scale of Intelligence (WPPSI-III), Kaufman Assessment Battery for Children (K-ABC), and an assessment of developmental milestones. RESULTS: In total, 44 children (22RS, 22CPO) were included. RS children were younger at study (70.5 ± 7.3 and 75.2 ± 7.5 months; P = .035). Both groups achieved the evaluated milestones within the normed time frame. WPPSI-III and K-ABC results showed no group differences. Mean values for Verbal IQ (101.8 ± 11.1 vs. 97.1 ± 15.7), Performance IQ (102.9 ± 12.1 vs. 99.6 ± 14.5), Processing Speed Quotient (98.9 ± 15.6 vs. 94.5 ± 15.7), Full-Scale IQ (103.2 ± 12.1 vs. 98.4 ± 15.3), and Sequential Processing Scale (102.1 ± 13.1 vs. 94.2 ± 17.3) were within the reference range (IQ 85-115) for RS and CPO children, respectively, indicating average performance of both groups. CONCLUSION: No neurocognitive, physical, or mental impairments were detected suggesting that RS children having upper airway obstruction (UAO) treated early and effectively may use their potential for an age-appropriate neurocognitive development. CLINICAL RELEVANCE: Tuebingen palatal plate treatment successfully releases UAO. Thus, isolated RS does not necessarily result in developmental delay or an impaired neurocognitive outcome. TRIAL REGISTRATION: Deutsches Register Klinischer Studien, DRKS00006831, https://www.drks.de/drks_web/.
Asunto(s)
Fisura del Paladar , Síndrome de Pierre Robin , Niño , Preescolar , Humanos , Pruebas Neuropsicológicas , Polisomnografía , Valores de ReferenciaRESUMEN
BACKGROUND: Robin sequence is defined as the triad of micrognathia, glossoptosis, and upper airway obstruction. In up to 85 percent, it is associated with cleft palate. Many studies have reported worse speech development in Robin sequence children after cleft palate repair. The authors investigated speech development in isolated Robin sequence with cleft palate versus children with cleft palate only at the age of 5 to 6 years. METHODS: All Robin sequence children were treated with the Tübingen palatal plate after birth. Data were collected using the German version of the Great Ormond Street Speech Assessment. Audio and video recordings were reviewed and analyzed separately by two blinded senior phoniatricians based on the German version of the Universal Reporting Parameters for Cleft Palate Speech, and scored to enable comparability of speech outcomes. RESULTS: Forty-four children (Robin sequence, n = 22; cleft palate only, n = 22) were included. Robin sequence children were significantly older at surgery (11.8 months versus 7.1 months; p < 0.001) but younger at study (70.5 months versus 75.2 months; p = 0.035). They also had more severe cleft of the palate (p = 0.006). All children studied showed good to very good speech development without serious impairment. None of the reported parameters on the German version of the Universal Reporting Parameters for Cleft Palate Speech showed significant group differences; the median total score in the Robin sequence group was 23 (interquartile range, 16.5 to 27.5) versus 19 (interquartile range, 17 to 23) in the cleft palate-only group. Statistical analysis revealed no significant effect of group (Z = -1.47; p = 0.14). CONCLUSIONS: No group differences in speech development were found at age 5 to 6 years. Isolated Robin sequence does not necessarily represent a risk for impaired speech development. CLINICAL QUESTION/LEVEL OF EVIDENCE: Risk, II.
Asunto(s)
Fisura del Paladar/complicaciones , Fisura del Paladar/fisiopatología , Síndrome de Pierre Robin/complicaciones , Síndrome de Pierre Robin/fisiopatología , Trastornos del Habla/etiología , Habla/fisiología , Niño , Desarrollo Infantil , Preescolar , Fisura del Paladar/cirugía , Femenino , Humanos , Masculino , Síndrome de Pierre Robin/cirugía , Estudios ProspectivosRESUMEN
OBJECTIVE: The aim of this study was to evaluate intraoral scanning (IOS) in infants, neonates, and small children with craniofacial anomalies for its feasibility, scanning duration, and success rate. Impression taking in vulnerable patients can be potentially life-threatening, with the risk of airway obstruction and aspiration of impression material. The advantage of increasingly digitalized dentistry is demonstrated. MATERIALS AND METHODS: IOS was captured with the Trios 3® (3Shape, Copenhagen, Denmark) intraoral scanner. The underlying disorders were divided into cleft lip and palate (CLP), Trisomy 21 (T21), Robin Sequence (RS), Treacher Collins syndrome (TC), and isolated mandibular retrognathia (MR). Scan data were analysed by scanning duration, number of images, possible correlations of these factors with the different craniofacial disorders, patient age, and relationship between first and subsequent scans. Clinical experiences with the repeated digital impressions are described. RESULTS: Patient data of 141 scans in 83 patients were analysed within an 11-month period. Patients had a median age of 137 days. Median scanning duration was 138 seconds, resulting in a median of 352 images. There was a statistically significant difference in scanning duration (P = 0.001) between infants and neonates. IOS took longest in patients with CLP (537 seconds) and shortest in T21 patients (21 seconds), although there was no statistically significant difference between aetiologies. There was no statistically significant difference between first and subsequent scans in scanning duration. In four cases the IOS had to be repeated, and one patient ultimately required conventional impression taking (all CLP patients; success rate 94%). No severe adverse events occurred. CONCLUSION: IOS is a fast, safe, and feasible procedure for neonates, small children, and infants with craniofacial malformations. One special challenge for both technician and user was identified in patients with CLP, though implementing this new approach of digital impression taking was otherwise found to be highly successful in everyday clinical routine.
Asunto(s)
Labio Leporino , Fisura del Paladar , Anomalías Craneofaciales , Niño , Labio Leporino/diagnóstico por imagen , Fisura del Paladar/diagnóstico por imagen , Diseño Asistido por Computadora , Anomalías Craneofaciales/diagnóstico por imagen , Técnica de Impresión Dental , Estudios de Factibilidad , Humanos , Imagenología Tridimensional , Lactante , Recién NacidoRESUMEN
OBJECTIVE: To determine the relative importance weights of items and grades of a newly developed additive outcome measure called the juvenile idiopathic arthritis (JIA) magnetic resonance imaging (MRI) scoring system for the temporomandibular joint (TMJ) (JAMRIS-TMJ). METHODS: An adaptive partial-profile, discrete choice experiment (DCE) survey using the 1000Minds platform was independently completed by members of an expert group consisting of radiologists and non-radiologist clinicians to determine the group-averaged relative weights for the JAMRIS-TMJ. Subsequently, an image-based vignette ranking exercise was done, during which experts individually rank ordered 14 patient vignettes for disease severity while blinded to the weights and unrestricted to JAMRIS-TMJ assessment criteria. Validity of the weighted JAMRIS-TMJ was tested by comparing the consensus-graded, DCE-weighted JAMRIS-TMJ score of the vignettes with their unrestricted image-based ranks provided by the experts. RESULTS: Nineteen experts completed the DCE survey, and 21 completed the vignette ranking exercise. Synovial thickening and joint enhancement showed higher weights per raw score compared to bone marrow items and effusion in the inflammatory domain, while erosions and condylar flattening showed nonlinear and higher weights compared to disk abnormalities in the damage domain. The weighted JAMRIS-TMJ score of the vignettes correlated highly with the ranks from the unrestricted comparison method, with median Spearman's ρ of 0.92 (interquartile range [IQR] 0.87-0.95) for the inflammation and 0.93 (IQR 0.90-0.94) for the damage domain. CONCLUSION: A DCE survey was used to quantify the importance weights of the items and grades of the JAMRIS-TMJ. The weighted score showed high convergent validity with an unrestricted, holistic vignette ranking method.
Asunto(s)
Artritis Juvenil/diagnóstico por imagen , Imagen por Resonancia Magnética , Índice de Severidad de la Enfermedad , Articulación Temporomandibular/diagnóstico por imagen , HumanosRESUMEN
Robin sequence is characterized by mandibular retrognathia, airway obstruction, and glossoptosis; 80%-90% also have a cleft palate. Various treatment approaches exist, and although controlled studies are rare, objective assessment of treatment outcomes that address the leading clinical issues, namely obstructive sleep apnea and failure to thrive, are essential. Sleep-disordered breathing may be detected using cardiorespiratory polygraphy or polysomnography. Pulse oximetry alone may miss infants with frequent obstructive apneas, yet no intermittent hypoxia. Among conservative treatment options, the Tubingen Palatal Plate with a velar extension shifting the tongue base forward is the only approach that corrects the underlying anatomy and that has undergone appropriate evaluation. Of the surgical treatment options, which are not necessarily the first line of therapy, mandibular distraction osteogenesis (MDO) is effective and has been most extensively adopted. Notwithstanding, it is puzzling that MDO is frequently used in some countries, yet hardly ever in others, despite similar tracheostomy rates. Thus, prospective multicenter studies with side-by-side comparisons aimed at identifying an optimal treatment paradigm for this potentially life-threatening condition are urgently needed.
Asunto(s)
Obstrucción de las Vías Aéreas , Osteogénesis por Distracción , Síndrome de Pierre Robin , Síndromes de la Apnea del Sueño , Apnea Obstructiva del Sueño , Obstrucción de las Vías Aéreas/etiología , Obstrucción de las Vías Aéreas/cirugía , Humanos , Lactante , Síndrome de Pierre Robin/diagnóstico , Síndrome de Pierre Robin/cirugía , Polisomnografía , Estudios Prospectivos , Estudios Retrospectivos , Síndromes de la Apnea del Sueño/terapia , Apnea Obstructiva del Sueño/diagnóstico , Apnea Obstructiva del Sueño/terapia , Resultado del TratamientoRESUMEN
The Tübingen therapy concept centers on an individual orthodontic palatal plate with a spur-like velar extension (Tübingen Palatal or Epiglottic Baton Plate, TPP or PEBP) and intensive feeding training. It was primarily developed for infants with Robin sequence, but has since also be used successfully in infants with other craniofacial malformations. TPP improves not only upper airway obstruction, but also feeding problems, thriving, mandibular growth and was associated with intact neurocognitive outcome. This review provides an overview of the evidence and the clinical and practical aspects of the Tübingen therapy concept.
Asunto(s)
Obstrucción de las Vías Aéreas , Síndrome de Pierre Robin , Obstrucción de las Vías Aéreas/terapia , Humanos , Lactante , Síndrome de Pierre Robin/complicaciones , Resultado del TratamientoRESUMEN
Contrast-enhanced magnetic resonance imaging (MRI) remains the most comprehensive modality to assess juvenile idiopathic arthritis (JIA)-related inflammation and osteochondral damage in the temporomandibular joints (TMJ). This study tested the reliability of a new JIA MRI scoring system for TMJ (JAMRIS-TMJ) and the impact of variations in calibration and reader specialty. Thirty-one MRI exams of bilateral TMJs were scored independently using the JAMRIS-TMJ by 20 readers consisting of radiologists and non-radiologist clinicians in three reading groups, with or without a calibrating atlas and/or tutorial. The inter-reader reliability in the multidisciplinary cohort assessed by the generalizability coefficient was 0.61-0.67 for the inflammatory and 0.66-0.74 for the damage domain. The atlas and tutorial did not improve agreement within radiologists, but improved the agreement between radiologist and non-radiologist groups. Agreements between different calibration levels were 0.02 to 0.08 lower by the generalizability coefficient compared to agreement within calibration levels; agreement between specialty groups was 0.04 to 0.10 lower than within specialty groups. Averaging two radiologists raised the reliability above 0.8 for both domains. Therefore, the reliability of JAMRIS-TMJ was moderate-to-good depending on the presence of specialty and calibration differences. The atlas and tutorial are necessary to improve reliability when the reader cohort consists of multiple specialties.
RESUMEN
Different approaches for digital workflows have already been presented for their use in palatal plates for newborns and infants. However, there is no evidence on the accuracy of CAD/CAM manufactured orthodontic appliances for this kind of application. This study evaluates trueness and precision provided by different CAM technologies and materials for these appliances. Samples of a standard palatal stimulation plate were manufactured using stereolithography (SLA), direct light processing (DLP) and subtractive manufacturing (SM). The effect of material (for SM) and layer thickness (for DLP) were also investigated. Specimens were digitized with a laboratory scanner (D2000, 3Shape) and analyzed with a 3D inspection software (Geomagic Control X, 3D systems). For quantitative analysis, differences between 3D datasets were measured using root mean square (RMS) error values for trueness and precision. For qualitative analysis, color maps were generated to detect locations of deviations within each sample. SM showed higher trueness and precision than AM technologies. Reducing layer thickness in DLP did not significantly increase accuracy, but prolonged manufacturing time. All materials and technologies met the clinically acceptable range and are appropriate for their use. DLP with 100 µm layer thickness showed the highest efficiency, obtaining high trueness and precision within the lowest manufacturing time.