Epitaxial Growth of Large-Scale α-Phase Antimonene.

Two-dimensional materials composed of elements from the 15th group of the periodic table remain largely unexplored. The primary challenge in advancing this research is the lack of large-scale layers that would facilitate extensive studies using laterally averaging techniques and enable functionalization for the fabrication of novel electronic, optoelectronic, and spintronic devices. In this report, we present a method for synthesizing large-scale antimonene layers, on the order of cm2. By employing molecular beam epitaxy, we successfully grow a monolayer film of α-phase antimonene on a W(110) surface passivated with a single-atom-thick layer of Sb atoms. The formation of α phase antimonene is confirmed through scanning tunneling microscopy and low-energy electron diffraction measurements. The isolated nature of the α-phase is further evidenced in the electronic structure, with linearly dispersed bands observed through angle-resolved photoelectron spectroscopy and supported by ab initio calculations.

Regioselective Syntheses of 2,3,5-Trisubstituted Pyridines via 5-Chloro-3-fluoro-2-(methylsulfonyl)pyridine.

We report the high-yielding, large-scale, one-pot synthesis of two versatile building blocks (1-Cl and 1-Br) for the regioselective synthesis of a variety of 2,3,5-trisubstituted pyridines from inexpensive materials. These molecules are readily derivatized at positions 2, 3, and 5. These building blocks can also be used for the synthesis of fused pyrido-oxazines and for the synthesis of 2,3,4,5-tetrasubstituted pyridines.

Implementation of the Su-Schrieffer-Heeger Model in the Self-Assembly Si-In Atomic Chains on the Si(553)-Au Surface.

Indium-decorated Si atomic chains on a stepped Si(553)-Au substrate are proposed as an extended Su-Schrieffer-Heeger (SSH) model, revealing topological end states. An appropriate amount of In atoms on the Si(553)-Au surface induce the self-assembly formation of trimer SSH chains, where the chain unit cell comprises one In atom and two Si atoms, confirmed by scanning tunneling microscopy images and density functional calculations. The electronic structure of the system, examined through scanning tunneling spectroscopy, manifests three electron bands within the Si-In chain, accompanied by additional midgap topological states exclusively appearing at the chain's end atoms. To elucidate the emergence of these topological states, a tight-binding model for a finite-length-extended SSH chain is proposed. Analysis of the energy spectra, density of states functions, and eigenfunctions demonstrates the topological nature of these self-assembled atomic chains.

Emergent Dirac Fermions in Epitaxial Planar Silicene Heterostructure.

Silicene, a single layer of Si atoms, shares many remarkable electronic properties with graphene. So far, silicene has been synthesized in its epitaxial form on a few surfaces of solids. Thus, the problem of silicene-substrate interaction appears, which usually depresses the original electronic behavior but may trigger properties superior to those of bare components. We report the direct observation of robust Dirac-dispersed bands in epitaxial silicene grown on Au(111) films deposited on Si(111). By performing in-depth angle-resolved photoemission spectroscopy measurements, we reveal three pairs of one-dimensional bands with linear dispersion running in three different directions of an otherwise two-dimensional system. By combining these results with first-principles calculations, we explore the nature of these bands and point to strong interaction between subsystems forming a complex Si-Au heterostructure. These findings emphasize the essential role of interfacial coupling and open a unique materials platform for exploring exotic quantum phenomena and applications in future-generation nanoelectronics.

On surface synthesis of an eleven-ring sulfur-doped nonacene.

Dithienoacenes with a heptacene core, heptaceno[2,3-b:11,12-b']bis[1]benzothiophene, have been synthesized through the combination of solution and surface assisted chemistry. The atomic composition, structural arrangement and electronic properties of the molecules on the Au(111) surface have been deeply explored by non-contact atomic force microscopy (nc-AFM), bond-resolved scanning tunnelling microscopy (BR-STM) and scanning tunneling spectroscopy (STS) corroborated by density functional theory (DFT) calculations. Our combined experiments reveal modifications induced by sulfur substitution.

Peculiar Structural Phase of a Single-Atom-Thick Layer of Antimony.

Using molecular beam epitaxy, a new structural phase of a single atom thick antimony layer has been synthesized on the W(110) surface. Scanning tunneling microscopy measurements reveal an atomically resolved structure with a perfectly flat surface and unusually large unit cell. The structure forms a well-ordered continuous film with a lateral size in the range of several millimeters, as revealed by low energy electron microscopy and diffraction experiments. The results of density functional theory calculations confirm the formation of a new phase of single-atom-thick antimony film without the buckling characteristic for the known phases of antimonene. The presented results demonstrate a substrate-tuned approach in the preparation of new structural phases of 2D materials.

On-surface synthesis of a phenylene analogue of nonacene.

Cyclobuta[1,2-b:3,4-b']ditetracene - an analogue of nonacene with a cyclobutadiene unit embedded in the central part has been synthesized by the combination of solution and on-surface chemistry. The atomic structure and electronic properties of the product on Au(111) have been determined by high resolution scanning tunnelling microscopy/spectroscopy corroborated by density functional theory calculations. Structural and magnetic parameters derived from theoretical calculations reveal that π conjugation is dominated by radialene-type contribution, with an admixture of cyclobutadiene-like antiaromaticity.

Evidence of sp2-like Hybridization of Silicon Valence Orbitals in Thin and Thick Si Grown on α-Phase Si(111)√3 × âˆš3R30°-Bi.

One-monolayer (ML) (thin) and 5-ML (thick) Si films were grown on the α-phase Si(111)√3 × âˆš3R30°-Bi at a low substrate temperature of 200 °C. Si films have been studied in situ by reflection electron energy loss spectroscopy (REELS) and Auger electron spectroscopy, as a function of the electron beam incidence angle α and low-energy electron diffraction (LEED), as well as ex situ by grazing incidence X-ray diffraction (GIXRD). Scanning tunneling microscopy (STM), and scanning tunneling spectroscopy (STS) were also reported. The REELS spectra, taken at the Si K absorption edge (~1.840 KeV), reveal the presence of two distinct loss structures attributed to transitions 1s→π* and 1s→σ* according to their intensity dependence on α, attesting to the sp2-like hybridization of the silicon valence orbitals in both thin and thick Si films. The synthesis of a silicon allotrope on the α-phase of Si(111)√3 × âˆš3R30°-Bi substrate was demonstrated by LEED patterns and GIXRD that discloses the presence of a Si stack of 3.099 (3) Å and a √3 × âˆš3 unit cell of 6.474 Å, typically seen for multilayer silicene. STM and STS measurements corroborated the findings. These measurements provided a platform for the new √3 × âˆš3R30° Si allotrope on a Si(111)√3 × âˆš3 R30°-Bi template, paving the way for realizing topological insulator heterostructures from different two-dimensional materials, Bi and Si.

Magnetism in Au-Supported Planar Silicene.

The adsorption and substitution of transition metal atoms (Fe and Co) on Au-supported planar silicene have been studied by means of first-principles density functional theory calculations. The structural, energetic and magnetic properties have been analyzed. Both dopants favor the same atomic configurations with rather strong binding energies and noticeable charge transfer. The adsorption of Fe and Co atoms do not alter the magnetic properties of Au-supported planar silicene, unless a full layer of adsorbate is completed. In the case of substituted system only Fe is able to produce magnetic ground state. The Fe-doped Au-supported planar silicene is a ferromagnetic structure with local antiferromagnetic ordering. The present study is the very first and promising attempt towards ferromagnetic epitaxial planar silicene and points to the importance of the substrate in structural and magnetic properties of silicene.

Carbamoyl Anion Addition to Azirines.

The addition of carbamoyl anions to azirines affords synthetically useful 2-aziridinyl amide building blocks. The reaction scope was explored with respect to both formamide and azirine, and the addition was found to be highly diastereoselective. A one-pot conversion of a ketoxime to an aziridinyl amide was demonstrated. The method was employed to incorporate an aziridine residue into a dipeptide segment.

Experimental evidence of a new class of massless fermions.

The discovery of graphene with its massless fermions established a new branch of nanomaterials in which linear bands can be realized. It has been predicted that beside Dirac fermions revealing isotropic character and observed in a number of two-dimensional materials, another class of massless fermions can also be found: strongly anisotropic fortune teller-like states which form planes instead of cones in the electronic structure. Here, we demonstrate that such distinct electronic structures exist and can be found in a surface layer of silicon.

Start Selective and Rigidify: The Discovery Path toward a Next Generation of EGFR Tyrosine Kinase Inhibitors.

The epidermal growth factor receptor (EGFR), when carrying an activating mutation like del19 or L858R, acts as an oncogenic driver in a subset of lung tumors. While tumor responses to tyrosine kinase inhibitors (TKIs) are accompanied by marked tumor shrinkage, the response is usually not durable. Most patients relapse within two years of therapy often due to acquisition of an additional mutation in EGFR kinase domain that confers resistance to TKIs. Crucially, oncogenic EGFR harboring both resistance mutations, T790M and C797S, can no longer be inhibited by currently approved EGFR TKIs. Here, we describe the discovery of BI-4020, which is a noncovalent, wild-type EGFR sparing, macrocyclic TKI. BI-4020 potently inhibits the above-described EGFR variants and induces tumor regressions in a cross-resistant EGFRdel19 T790M C797S xenograft model. Key was the identification of a highly selective but moderately potent benzimidazole followed by complete rigidification of the molecule through macrocyclization.

New Findings on Multilayer Silicene on Si(111)√3×√3R30°-Ag Template.

We report new findings on multilayer silicene grown on Si(111)√3 × âˆš3 R30°-Ag template, after the recent first compelling experimental evidence of its synthesis. Low-energy electron diffraction, reflection high-energy electron diffraction, and energy-dispersive grazing incidence X-ray diffraction measurements were performed to show up the fingerprints of √3 × âˆš3 multilayer silicene. Angle-resolved photoemission spectroscopy displayed new features in the second surface Brillouin zone, attributed to the multilayer silicene on Si(111)√3 × âˆš3 R30°-Ag. Band-structure dispersion theoretical calculations performed on a model of three honeycomb stacked layers, silicene grown on Si(111)√3 × âˆš3 R30°-Ag surface confirm the experimental results.

Oscillation in the stability of consecutive chemical bonds at the molecule-metal interface - the case of ionic bonding.

Ion-induced desorption was successfully applied for the analysis of the stability of chemical bonds at the molecule-metal interface in the case of ionic bonding. The obtained experimental data combined with the results of the DFT calculations reveal the effect of positional oscillations in the stability of consecutive chemical bonds, which has general character in chemistry.

Functionalization of group-14 two-dimensional materials.

The great success of graphene has boosted intensive search for other single-layer thick materials, mainly composed of group-14 atoms arranged in a honeycomb lattice. This new class of two-dimensional (2D) crystals, known as 2D-Xenes, has become an emerging field of intensive research due to their remarkable electronic properties and the promise for a future generation of nanoelectronics. In contrast to graphene, Xenes are not completely planar, and feature a low buckled geometry with two sublattices displaced vertically as a result of the interplay between sp2 and sp3 orbital hybridization. In spite of the buckling, the outstanding electronic properties of graphene governed by Dirac physics are preserved in Xenes too. The buckled structure also has several advantages over graphene. Together with the spin-orbit (SO) interaction it may lead to the emergence of various experimentally accessible topological phases, like the quantum spin Hall effect. This in turn would lead to designing and building new electronic and spintronic devices, like topological field effect transistors. In this regard an important issue concerns the electron energy gap, which for Xenes naturally exists owing to the buckling and SO interaction. The electronic properties, including the magnitude of the energy gap, can further be tuned and controlled by external means. Xenes can easily be functionalized by substrate, chemical adsorption, defects, charge doping, external electric field, periodic potential, in-plane uniaxial and biaxial stress, and out-of-plane long-range structural deformation, to name a few. This topical review explores structural, electronic and magnetic properties of Xenes and addresses the question of their functionalization in various ways, including external factors acting simultaneously. It also points to future directions to be explored in functionalization of Xenes. The results of experimental and theoretical studies obtained so far have many promising features making the 2D-Xene materials important players in the field of future nanoelectronics and spintronics.

Development of a Scalable, Chromatography-Free Synthesis of t-Bu-SMS-Phos and Application to the Synthesis of an Important Chiral CF3-Alcohol Derivative with High Enantioselectivity Using Rh-Catalyzed Asymmetric Hydrogenation.

A chromatography-free, asymmetric synthesis of the C2-symmetric P-chiral diphosphine t-Bu-SMS-Phos was developed using a chiral auxiliary-based approach in five steps from the chiral auxiliary in 36% overall yield. Separtion and recovery of the auxiliary were achieved with good yield (97%) to enable recycling of the chiral auxiliary. An air-stable crystalline form of the final ligand was identified to enable isolation of the final ligand by crystallization to avoid chromatography. This synthetic route was applied to prepare up to 4 kg of the final ligand. The utility of this material was demonstrated in the asymmetric hydrogenation of trifluoromethyl vinyl acetate at 0.1 mol % Rh loading to access a surrogate for the pharmaceutically relavent chiral trifluoroisopropanol fragment in excellent yield and enantiomeric excess (98.6%).

Structural model of silicene-like nanoribbons on a Pb-reconstructed Si(111) surface.

A structural model of the recently observed silicene-like nanoribbons on a Pb-induced √3 × âˆš3 reconstructed Si(111) surface is proposed. The model, which is based on first principles density functional theory calculations, features a deformed honeycomb structure directly bonded to the Si(111) surface underneath. Pb atoms stabilize the nanoribbons, as they passivate the uncovered substrate, thus lower the surface energy, and suppress the nanoribbon-substrate interaction. The proposed structural model reproduces well all the experimental findings.

Nonacene Generated by On-Surface Dehydrogenation.

The on-surface synthesis of nonacene has been accomplished by dehydrogenation of an air-stable partially saturated precursor, which could be aromatized by using a combined scanning tunneling and atomic force microscope as well as by on-surface annealing. This transformation allowed the in-detail analysis of the electronic properties of nonacene molecules physisorbed on Au(111) by scanning tunneling spectroscopy measurements. The spatial mapping of molecular orbitals was corroborated by density functional theory calculations. Furthermore, the thermally induced dehydrogenation uncovered the isomerization of intermediate dihydrononacene species, which allowed for their in-depth structural and electronic characterization.

Rehybridization-induced charge density oscillations in the long-range corrugated silicene.

Freestanding silicene is a one-atom-thick two-dimensional material composed of Si atoms arranged in a honeycomb lattice that is related to graphene. Its low-buckled atomic structure facilitates the functionalization of silicene. We report on an alternative method of functionalization which utilizes one-dimensional long-range periodic structural deformation of silicene, and leads to rehybridization-induced sublattice-polarized charge density oscillations. The charge density modulation follows the structural deformation of silicene, and features opposite phases in different sublattices. The modulated atomic structure leads to anisotropy of electron group velocity and to opening of a band gap that grows and oscillates with increasing corrugation. We show that rippled silicene can be considered as a combination of a silicene nanoribbon and a part of a silicon nanotube. The existence of the charge density oscillation phase is a consequence of the layer corrugation and the tendency of silicon toward sp3 bonding. One-dimensional structural modulation appears to be a powerful method of silicene functionalization, and the predicted phase is expected to be realized in other two-dimensional materials, which prefer sp3 bonding.

Purely one-dimensional bands with a giant spin-orbit splitting: Pb nanoribbons on Si(553) surface.

We report on a giant Rashba type splitting of metallic bands observed in one-dimensional structures prepared on a vicinal silicon substrate. A single layer of Pb on Si(553) orders this vicinal surface making perfectly regular distribution of monatomic steps. Although there is only one layer of Pb, the system reveals very strong metallic and purely one-dimensional character, which manifests itself in multiple surface state bands crossing the Fermi level in the direction parallel to the step edges and a small band gap in the perpendicular direction. As shown by spin-polarized photoemission and density functional theory calculations these surface state bands are spin-polarized and completely decoupled from the rest of the system. The experimentally observed spin splitting of 0.6 eV at room temperature is the largest found to now in the silicon-based metallic nanostructures, which makes the considered system a promising candidate for application in spintronic devices.