Production of [211At]NaAt solution under GMP compliance for investigator-initiated clinical trial.

BACKGROUND: The alpha emitter astatine-211 (211At) is garnering attention as a novel targeted alpha therapy for patients with refractory thyroid cancer resistant to conventional therapy using beta emitter radioiodine (131I). Herein, we aimed to establish a robust method for the manufacturing and quality control of [211At]NaAt solution for intravenous administration under the good manufacturing practice guidelines for investigational products to conduct an investigator-initiated clinical trial. RESULTS: 211At was separated and purified via dry distillation using irradiated Bi plates containing 211At obtained by the nuclear reaction of 209Bi(4He, 2n)211At. After purification, the 211At trapped in the cold trap was collected in a reaction vessel using 15 mL recovery solution (1% ascorbic acid and 2.3% sodium hydrogen carbonate). After stirring the 211At solution for 1 h inside a closed system, the reaction solution was passed through a sterile 0.22 µm filter placed in a Grade A controlled area and collected in a product vial to prepare the [211At]NaAt solution. According to the 3-lot tests, decay collected radioactivity and radiochemical yield of [211At]NaAt were 78.8 ± 6.0 MBq and 40 ± 3%, respectively. The radiochemical purity of [211At]At- obtained via ion-pair chromatography at the end of synthesis (EOS) was 97 ± 1%, and remained > 96% 6 h after EOS; it was detected at a retention time (RT) 3.2-3.3 min + RT of I-. LC-MS analysis indicated that this principal peak corresponded with an astatide ion (m/z = 210.988046). In gamma-ray spectrometry, the 211At-related peaks were identified (X-ray: 76.9, 79.3, 89.3, 89.8, and 92.3 keV; γ-ray: 569.7 and 687.0 keV), whereas the peak at 245.31 keV derived from 210At was not detected during the 22 h continuous measurement. The target material, Bi, was below the 9 ng/mL detection limit in all lots of the finished product. The pH of the [211At]NaAt solution was 7.9-8.6; the concentration of ascorbic acid was 9-10 mg/mL. Other quality control tests, including endotoxin and sterility tests, confirmed that the [211At]NaAt solution met all quality standards. CONCLUSIONS: We successfully established a stable method of [211At]NaAt solution that can be administered to humans intravenously as an investigational product.

Immuno-PET and Targeted α-Therapy Using Anti-Glypican-1 Antibody Labeled with 89Zr or 211At: A Theranostic Approach for Pancreatic Ductal Adenocarcinoma.

Glypican-1 (GPC1) is overexpressed in several solid cancers and is associated with tumor progression, whereas its expression is low in normal tissues. This study aimed to evaluate the potential of an anti-GPC1 monoclonal antibody (GPC1 mAb) labeled with 89Zr or 211At as a theranostic target in pancreatic ductal adenocarcinoma. Methods: GPC1 mAb clone 01a033 was labeled with 89Zr or 211At with a deferoxamine or decaborane linker, respectively. The internalization ability of GPC1 mAb was evaluated by fluorescence conjugation using a confocal microscope. PANC-1 xenograft mice (n = 6) were intravenously administered [89Zr]GPC1 mAb (0.91 ± 0.10 MBq), and PET/CT scanning was performed for 7 d. Uptake specificity was confirmed through a comparative study using GPC1-positive (BxPC-3) and GPC1-negative (BxPC-3 GPC1-knockout) xenografts (each n = 3) and a blocking study. DNA double-strand breaks were evaluated using the γH2AX antibody. The antitumor effect was evaluated by administering [211At]GPC1 mAb (∼100 kBq) to PANC-1 xenograft mice (n = 10). Results: GPC1 mAb clone 01a033 showed increased internalization ratios over time. One day after administration, a high accumulation of [89Zr]GPC1 mAb was observed in the PANC-1 xenograft (SUVmax, 3.85 ± 0.10), which gradually decreased until day 7 (SUVmax, 2.16 ± 0.30). The uptake in the BxPC-3 xenograft was significantly higher than in the BxPC-3 GPC1-knockout xenograft (SUVmax, 4.66 ± 0.40 and 2.36 ± 0.36, respectively; P = 0.05). The uptake was significantly inhibited in the blocking group compared with the nonblocking group (percentage injected dose per gram, 7.3 ± 1.3 and 12.4 ± 3.0, respectively; P = 0.05). DNA double-strand breaks were observed by adding 150 kBq of [211At]GPC1 and were significantly suppressed by the internalization inhibitor (dynasore), suggesting a substantial contribution of the internalization ability to the antitumor effect. Tumor growth suppression was observed in PANC-1 mice after the administration of [211At]GPC1 mAb. Internalization inhibitors (prochlorperazine) significantly inhibited the therapeutic effect of [211At]GPC1 mAb, suggesting an essential role in targeted α-therapy. Conclusion: [89Zr]GPC1 mAb PET showed high tumoral uptake in the early phase after administration, and targeted α-therapy using [211At]GPC1 mAb showed tumor growth suppression. GPC1 is a promising target for future applications for the precise diagnosis of pancreatic ductal adenocarcinoma and GPC1-targeted theranostics.

Evaluation of LAT1 Expression in Patients With Lung Cancer and Mediastinal Tumors: 18F-FBPA PET Study With Immunohistological Comparison.

PURPOSE OF THE REPORT: L-type amino acid transporter-1 (LAT1) is a tumor-specific transporter expressed in various tumor types, with minimal expression in normal organs. We previously demonstrated 18F-fluoro-borono-phenylalanine (18F-FBPA) as a selective PET probe for LAT1 in a preclinical study. Herein, we evaluated LAT1 expression in preoperative patients with lung or mediastinal tumors using 18F-FBPA PET and immunofluorescence staining. PATIENTS AND METHODS: The study population included patients with histopathological diagnosis (n = 55): primary lung cancers (n = 21), lung metastases (n = 6), mediastinal tumors (n = 15), and benign lesion (n = 13). PET scanning was performed 1 hour after the injection of 18F-FBPA (232 ± 32 MBq). Immunofluorescence staining was performed on the resected tumor sections using LAT1 antibody. LAT1 staining was graded on a 4-grade scale and compared with the SUVmax on 18F-FBPA PET. RESULTS: A positive correlation was observed between the SUVmax of 18F-FBPA PET and LAT1 expression by immunofluorescence staining (r = 0.611, P < 0.001). The SUVmax of 18F-FBPA was 3.92 ± 1.46 in grade 3, 3.21 ± 1.82 in grade 2, 2.33 ± 0.93 in grade 1, and 1.50 ± 0.39 in grade 0 of LAT1 expression. Although 18F-FBPA PET showed variable uptake in lung cancers and mediastinal tumors, benign lesions showed significantly lower SUVmax than those in malignant lesions (P < 0.01). CONCLUSIONS: Uptake on 18F-FBPA PET reflected the expression level of LAT1 in lung and mediastinal tumors. It was suggested that 18F-FBPA PET can be used for the precise characterization of the tumor in pretreatment evaluation.

Advantages of FBPA PET in evaluating early response of anti-PD-1 immunotherapy in B16F10 melanoma-bearing mice: Comparison to FDG PET.

Purpose: PET with L-4-borono-2-[18F] fluoro-phenylalanine (FBPA) was reported to be useful to differentiate malignant tumors and inflammation. Although immunotherapy with immune checkpoint inhibitors (ICIs) has been applied to cancer treatment recently, FDG PET may not be suitable to determine the effect of ICIs because of false-positive findings caused by treatment-related inflammation. In this study, we aimed to demonstrate that FBPA PET allowed detection of the early response of anti-PD-1 immunotherapy in tumor-bearing mice, comparing the results with those of FDG PET. Materials and methods: Mice with B16F10 melanoma tumor xenografts were prepared. Anti-mouse PD-1 antibody or PBS was administered twice intraperitoneally to the tumor-bearing mice on Day 0 (3 days after inoculation) and Day 5 (treatment or control group ). PET/CT imaging was performed twice for each mouse on Day 0 before the anti-PD-1 antibody/PBS administration and on Day 7 using a micro-PET/CT scanner. FBPA and FDG PET/CT studies were conducted separately. SUVmax and the tumor to liver ratio (T/L ratio) were used as parameters exhibiting tumor activity. Tumor uptake volume (TUV) and metabolic tumor volume (MTV) were also calculated for FBPA and FDG, respectively. Changes between pre- and posttreatment SUVmax or T/L ratio were observed using the formula as follows: [(posttreatment parameter values/pretreatment values - 1) × 100] (%). Results: Tumors in TrG were smaller than those in CoG on Day 7. SUVmax and T/L ratio represented no differences between TrG and CoG in FBPA and FDG PET before treatment. FBPA PET on Day 7 demonstrated that SUVmax, T/L ratio, and TUV in TrG were statistically smaller than those in CoG. %T/L ratio and %SUVmax exhibited the same trend in FBPA PET. However, FDG PET on Day 7 revealed no differences in all parameters between TrG and CoG. T/L ratio and %SUVmax in TrG represented larger values than those in CoG without statistical significances. Conclusion: This study demonstrated that FBPA PET allowed detection of the early response of anti-PD-1 immunotherapy in B16F10 melanoma-bearing mice. FDG PET did not detect the response. Further studies are required to determine whether FBPA PET is useful in evaluating the treatment effect of ICIs in humans.

One-pot and one-step automated radio-synthesis of [18F]AlF-FAPI-74 using a multi purpose synthesizer: a proof-of-concept experiment.

BACKGROUND: Fibroblast activation protein (FAP) is overexpressed in the stroma of many types of cancer. [18F]AlF-FAPI-74 is a positron emission tomography tracer with high selectivity for FAP, which has already shown high accumulation within human tumors in clinical studies. However, [18F]AlF-FAPI-74 radiosynthesis has not been optimized using an automated synthesizer. Herein, we report a one-pot and one-step automated radiosynthesis method using a multi purpose synthesizer. RESULTS: Radiosynthesis of [18F]AlF-FAPI-74 was performed using a cassette-type multi purpose synthesizer CFN-MPS200. After the recovery rate of trapped [18F]fluoride onto the anion-exchange cartridge using a small amount of eluent was investigated manually, a dedicated [18F]AlF-FAPI-74 synthesis cassette and synthesis program for one-pot and one-step fluorination was developed. The solutions for the formulation of [18F]AlF-FAPI-74 synthesized using this were evaluated to obtain stable radiochemical purity. The recovery rate of [18F]fluoride with only 300 µL of eluent ranged 90 ± 9% by introduction from the male side and elution from the female side of the cartridge. In automated synthesis, the eluted [18F]fluoride and precursor solution containing aluminum chloride were mixed; then, fluorination was performed in a one-pot and one-step process at room temperature for 5 min, followed by 15 min at 95 °C. As a result, the radioactivity of [18F]AlF-FAPI-74 was 11.3 ± 1.1 GBq at the end of synthesis from 32 to 40 GBq of [18F]fluoride, and its radiochemical yield was 37 ± 4% (n = 10). The radiochemical purity at the end of the synthesis was ≥ 97% for all formulation solutions. When the diluent was saline, the radiochemical purity markedly decreased after 4 h of synthesis. In contrast, with phosphate-buffered saline (pH 7.4) or 10 mM phosphate-buffered saline (pH 6.7) containing 100 mg of sodium ascorbate, the radiochemical purity was stable at 97%. Non-radioactive AlF-FAPI-74 and total impurities, including non-radioactive AlF-FAPI-74, were 0.3 ± 0.1 µg/mL and 2.8 ± 0.6 µg/mL. Ethanol concentration and residual DMSO were 5.5 ± 0.2% and 21 ± 6 ppm, respectively. CONCLUSIONS: We established a one-pot one-step automated synthesis method using a CFN-MPS200 synthesizer that provided high radioactivity and stable radiochemical purity for possible clinical applications.

Extended single-dose toxicity study of [211At]NaAt in mice for the first-in-human clinical trial of targeted alpha therapy for differentiated thyroid cancer.

OBJECTIVE: Astatine (211At) is a promising alpha emitter as an alternative to iodine (131I). We are preparing the first-in-human (FIH) clinical trial of targeted alpha therapy for differentiated thyroid cancer in consultation with Pharmaceuticals and Medical Devices Agency. Here, we performed an extended single-dose toxicity examination under a reliability standard, as a preclinical safety assessment of [211At]NaAt to determine the FIH dose. METHODS: [211At]NaAt solution was injected into normal 6-week-old mice (male (n = 50) and female (n = 50), body weight: male 33.2 ± 1.7 g, female 27.3 ± 1.5 g), which were then divided into four groups: 5 MBq/kg (n = 20), 20 MBq/kg (n = 20), 50 MBq/kg (n = 30), saline control (n = 30). The mice were followed up for 5 days (primary evaluation point for acute toxicity: n = 80) or 14 days (n = 20: evaluation point for recovery) to monitor general condition and body weight change. At the end of the observation period, necropsy, blood test, organ weight measurement, and histopathological examination were performed. For body weight, blood test, and organ weight, statistical analyses were performed to compare data between the control and injected groups. RESULTS: No abnormal findings were observed in the general condition of mice. In the 50 MBq/kg group, males (days 3 and 5) showed a significant decrease in body weight compared with the control. However, necropsy did not differ significantly beyond the range of spontaneous lesions. In the blood test, males (50 MBq/kg) and females (50 MBq/kg) showed a decrease in white blood cell and platelet counts on day 5, and recovery on day 14. In the testis, a considerable weight decrease was observed on day 14 (50 MBq/kg), and multinucleated giant cells were observed in all mice, indicating a significant change related to the administration of [211At]NaAt. CONCLUSIONS: In the extended single-dose toxicity study of [211At]NaAt, administration of high doses resulted in weight loss, transient bone marrow suppression, and pathological changes in the testis, which require consideration in the FIH clinical trial.

Automated [18F]PSMA-1007 production by a single use cassette-type synthesizer for clinical examination.

BACKGROUND: [18F]PSMA-1007, a positron emission tomography (PET) tracer, specifically targets prostate-specific membrane antigen (PSMA), which is highly expressed in prostate cancer. PSMA-PET is effective especially for regional detection of biochemical recurrence, which significantly affects patient management. Herein, we established and optimized a one-step radiolabeling protocol to separate and purify [18F]PSMA-1007 with a CFN-MPS200 synthesizer for clinical application. RESULTS: A dedicated single use cassette and synthesis program for [18F]PSMA-1007 was generated using a single-step method for direct precursor radiolabeling. In the cassette, three tube types (fluoro-elastomer, PharMed® BPT, silicone) and two different precursor salts (trifluoroacetic acid or acetic acid) were compared for optimization. Furthermore, three-lot tests were performed under optimized conditions for quality confirmation. Activity yields and mean radiochemical purity of [18F]PSMA-1007 were > 5000 MBq and 95%, respectively, at the end of synthesis, and the decay-corrected mean radiochemical yield from all three cassettes was approximately 40% using a trifluoroacetic acid salt precursor. Fluoro-elastomer tubings significantly increased the amount of non-radioactive PSMA-1007 (8.5 ± 3.1 µg/mL) compared to those with other tubings (0.3 µg/mL). This reduced the molar activity of [18F]PSMA-1007 synthesized in the cassette assembled by fluoro-elastomer tubings (46 GBq/µmol) compared to that with PharMed® BPT and silicone tubings (1184 and 1411 GBq/µmol, respectively). Residual tetrabutylammonium, acetonitrile, and dimethyl sulfoxide levels were <  2.6 µg/mL, < 8 ppm, and <  11 ppm, respectively, and ethanol content was 8.0-8.1% in all three cassettes and two different salts. Higher activity yields, radiochemical purities, and decay-corrected radiochemical yields were obtained using an acetic acid salt precursor rather than a trifluoroacetic acid salt precursor (7906 ± 1216 MBq, 97% ± 0%, and 56% ± 4%). In the three-lot tests under conditions optimized with silicone cassettes and acetic acid salt precursor, all quality items passed the specifications required for human use. CONCLUSIONS: We successfully automated the production of [18F]PSMA-1007 for clinical use and optimized synthesis procedures with a CFN-MPS200 synthesizer using a silicone cassette and acetic acid salt precursor. Cassette availability will facilitate a wide spread use of [18F]PSMA-1007-PET, leading to an effective prostate cancer management.

Chemical approach for the syntheses of GM4 isomers with sialic acid to non-natural linkage positions on galactose.

Cell-surface glycans containing sialic acid are involved in various biological phenomena. However, the syntheses of GM4 derivatives with (2 → 2) and (2 → 4) linkages have not been investigated to date. In this study, sialylation of all of the hydroxyl groups on galactose were investigated for the syntheses of GM4 isomers. Regioselective sialylation was achieved via protection of galactosyl acceptors using electron-rich benzyl groups. These synthetic sialylated glycans will prove to be useful tools for studying unidentified carbohydrate-mediated biological roles.