Conflicting Aromaticity in Trirhodium(I) Rosarin.

Aromaticity is one of the most important and widely used concepts in chemistry. Among the various experimentally discovered and theoretically predicted compounds that possess different types of aromaticity, conflicting aromaticity, where aromatic and antiaromatic electron delocalization is present in one molecule simultaneously, remains one of the most controversial and elusive concepts, although theoretically predicted 15 years ago. In this work, we synthesized a novel conflicting aromatic trirhodium complex that contains a σ-aromatic metal fragment surrounded by the π-antiaromatic organic ligand and characterized it by nuclear magnetic resonance spectroscopy, high-resolution mass spectrometry, and X-ray single crystal structure analysis. Experimental characterization and quantum chemical calculations confirm the unique conflicting aromaticity of the synthesized trirhodium molecule. Thus, this novel conflicting aromatic molecule expands the family of aromatic compounds. This discovery will enable researchers to develop and understand the phenomena of conflicting aromaticity in chemistry.

Bowl-Shaped Kekulene Analogues: Cycloarenes with two Five-Membered Rings.

Kekulene, a cycloarene composed of 12 fused benzene rings in a circular arrangement, exhibits a highly planar and robust structure. Kekulene has been the subject of investigation into its aromaticity and electronic structure, particularly in relation to the cyclic benzenoid. We have successfully synthesized novel bowl-shaped kekulene analogues with five-membered rings incorporated into the kekulene structure. The results of DFT calculations and VT-NMR spectra indicate that inversion of their concave-convex structures occurs at room temperature. The NICS and AICD plots predict that the Clar's type resonance structure is found in a manner analogous to the pristine kekulene, albeit with the interruption of the π-conjugation on the sp3 carbons at the five-membered rings. Despite the presence of the Clar's resonance structure, the Diels-Alder reaction proceeded smoothly with a dienophile, in contrast to the behavior of planar kekulene derivatives. This study will lead to the creation of novel bowl-shaped compounds and development of reactivity in aromatic compounds.

Enhanced Four-Electron Oxygen Reduction Selectivity of Clamp-Shaped Cobalt(II) Porphyrin(2.1.2.1) Complexes.

The molecular structure, electrochemistry, spectroelectrochemistry and electrocatalytic oxygen reduction reaction (ORR) features of two CoII porphyrin(2.1.2.1) complexes bearing Ph or F5 Ph groups at the two meso-positions of the macrocycle are examined. Single crystal X-ray analysis reveal a highly bent, nonplanar macrocyclic conformation of the complex resulting in clamp-shaped molecular structures. Cyclic voltammetry paired with UV/Vis spectroelectrochemistry in PhCN/0.1 M TBAP suggest that the first electron addition corresponds to a macrocyclic-centered reduction while spectral changes observed during the first oxidation are consistent with a metal-centered CoII /CoIII process. The activity of the clamp-shaped complexes towards heterogeneous ORR in 0.1 M KOH show selectivity towards the 4e- ORR pathway giving H2 O. DFT first-principle calculations on the porphyrin catalyst indicates a lower overpotential for 4e- ORR as compared to the 2e- pathway, consistent with experimental data.

A porphyrin(2.1.2.1) bis-boron complex as a deep-red AIE luminophore induced by intermolecular F-π interaction.

Mono-/diboron complexes with saddle-shaped molecular conformations were synthesized from porphyrins(2.1.2.1). The boron complexes have unique structure-dependent photophysical properties: (a) monoboron complexes 2a and 2b are not emissive in solution and the solid state, (b) diboron complex 3a shows red emission in toluene, and (c) diboron complex 3b shows aggregation-induced emission (AIE) in the deep-red region due to intermolecular secondary interactions (F-π). This is the first case of a boron porphyrinoid complex that shows AIE emission in the deep-red region in decades.

Synthesis of Planar meso-Aryl Rosarins: A Reversible Antiaromatic/Aromatic Interconversion.

Novel 24π antiaromatic and 26π aromatic meso-aryl rosarins were successfully obtained for the first time from ß-free bipyrrole through a one-pot synthesis. Because of the absence of substituents at the ß-positions of the pyrrole units, the ß-free pristine rosarin backbones were highly planar, as confirmed using X-ray crystallography. Optical measurements indicated interconversion between 24π antiaromatic and 26π aromatic ß-free pristine rosarin via redox reactions, which was not observed in distorted ß-dodecamethyl rosarin.

Synthesis, Characterization, and Electrochemistry of Copper Dibenzoporphyrin(2.1.2.1) Complexes.

Three copper dibenzoporphyrin(2.1.2.1) complexes having two dipyrromethene units connected through o-phenylen bridges and 4-MePh, Ph, or F5Ph substituents at the meso positions of the dipyrrins were synthesized and characterized according to their spectral, electrochemical, and structural properties. As indicated by the single-crystal X-ray structures, all three derivatives have highly bent molecular structures, with angles between each planar dipyrrin unit ranging from 89° to 85°, indicative of a nonaromatic molecule. The insertion of copper(II) into dibenzoporphyrins(2.1.2.1) induced a change in the macrocyclic cavity shape from rectangular in the case of the free-base precursors to approximately square for the metalated copper derivatives. Solution electron paramagnetic resonance (EPR) spectra at 100 K showed hyperfine coupling of the Cu(II) central metal ion and the N nucleus in the highly bent molecular structures. Electrochemical measurements in CH2Cl2 or N,N-dimethylformamide (DMF) containing 0.1 M tetrabutylammonium perchlorate (TBAP) were consistent with ring-centered electron transfers and, in the case of reduction, were assigned to electron additions involving two equivalent π centers on the bent nonaromatic molecule. The potential separation between the two reversible one-electron reductions ranged from 230 to 400 mV in DMF, indicating a moderate-to-strong interaction between the equivalent redox-active dipyrrin units of the dibenzoporphyrins(2.1.2.1). The experimentally measured highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) gaps ranged from 2.14 to 2.04 eV and were smaller than those seen for the planar copper tetraarylporphyrins(1.1.1.1), (Ar)4PCu.

Porphyrin(2.1.2.1) as a novel binucleating ligand: synthesis and molecular structures of mono- and di-rhodium(I) complexes.

The first example of monovalent and bimetallic porphyrins(2.1.2.1), the rhodium(I) complex of porphyrin(2.1.2.1), was readily obtained under controlled conditions. The coordinated rhodium(I) drastically influenced the molecular structure and optical and electronic properties. Our results clearly demonstrate that porphyrin(2.1.2.1) could be developed as a new binucleating ligand for the fabrication of bimetallic complexes.

Binuclear Rhodium(I) Complex of a Dimethylvinylene-Bridged Distorted Hexaphyrin(2.1.2.1.2.1).

A highly distorted binuclear rhodium(I) complex, 2Rh, was successfully synthesized from hexaphyrin(2.1.2.1.2.1) containing dimethylvinylene-bridges between dipyrrin units. IR spectroscopy, 1H NMR spectroscopy, and X-ray crystallography revealed that the complex 2Rh consists of two rhodium(I) ions coordinated to two dipyrrin units. Rh complexation induced a transformation from a trans-/cis-/trans- to trans-/cis-/cis-conformation on the dimethylvinylene-bridges. This is the first example of rhodium(I)-ion-induced cis-/trans-isomerization in the porphyrin derivatives. Theoretical calculations of 2Rh predicted the presence of intramolecular charge-transfer absorption due to the distorted molecular structure.

Controlled Fabrication and Characterization of Coronene Diimide-Based Insoluble Thin Films Produced by Photoinduced Cyclization.

An insoluble thin film of a coronene diimide (CDI) derivative was fabricated from a soluble precursor of perylene diimide (PDI) by photoirradiation. We prepared a 1,7-diarylated PDI (TP-PDI) that can be converted into a coronene diimide (TP-CDI) derivative via a Scholl-type photocyclization reaction. This reaction was accompanied by structural changes from a twisted structure to a π-extended planar molecule. It was found that this photoconversion reaction occurs for both solution-based and thin-film-based reactants investigated by the changes of UV-vis absorption spectra and 1 H NMR spectra. The photocyclization reactions were found to proceed smoothly in polar solvents. In the thin-film state, the solvent vapor annealing method is a key process for achieving photoconversion reaction. Additionally, the fabrication of multi-layered thin films was achieved without undesirable dissolution of the underlying layers because of different solubilities of TP-PDI and TP-CDI.

Layer-by-Layer Growth Control of Metal-Organic Framework Thin Films Assembled on Polymer Films.

We demonstrate growth control of Cu-based metal-organic framework (MOF) (HKUST-1) thin films assembled by the layer-by-layer technique on polymer films. The crystallinity and crystal face of MOF thin films were found to be controlled by reaction sites in polymer films such as hydroxy groups (the (100) crystal face), carbonyl groups (the (111) crystal face), and amide groups (the (100) crystal face). The HKUST-1 film growth amount is highly correlated with the polar component of the surface free energy, indicating that polymer sites, which afford hydrogen and coordination bonding, are important for the initial adsorption of Cu complexes. We also demonstrated a resistive switching device application using an HKUST-1 thin film on the poly(vinyl alcohol) dip-coated film at 40 deposition cycles, which suggests that the HKUST-1 thin film serves as a resistive switching layer with good film formation capability.

Vinylene-Bridged Cyclic Dipyrrin and BODIPY Trimers.

Vinylene-bridged cyclic boron-difluoride complex of dipyrrin (BODIPY) trimers were successfully prepared from expanded dimethyl-vinylene bridged hexaphyrin(2.1.2.1.2.1) Me-Hex that has the structure of alternate dipyrrins and vinylene bridges. The hexaphyrin(2.1.2.1.2.1) Me-Hex can coordinate with boron ions to afford five kinds of cyclic BODIPYs given by step-by-step boron complexations. Crystal structures of all cyclic BODIPYs except for 3BF2-Me-Hex(b) formed non-planar structures. The theoretical calculation predicted that mono-/bis-boron cyclic BODIPYs show the intramolecular charge transfer (ICT) characteristics, whereas tri-boron cyclic BODIPYs have no ICT characteristics. Reflecting these electronic properties, tri-boron cyclic BODIPYs exhibit weak fluorescence in the red region, but mono-/bis-boron cyclic BODIPYs exhibit no emission. Vinylene bridged cyclic dipyrrin trimer Me-Hex is the novel porphyrinoid ligand allowed to control the boron coordination under different reaction conditions to form various boron complexes.

Direct Correlation of Nanoscale Morphology and Device Performance to Study Photocurrent Generation in Donor-Enriched Phases of Polymer Solar Cells.

The nanoscale morphology of polymer blends is a key parameter to reach high efficiency in bulk heterojunction solar cells. Thereby, research typically focusing on optimal blend morphologies while studying nonoptimized blends may give insight into blend designs that can prove more robust against morphology defects. Here, we focus on the direct correlation of morphology and device performance of thieno[3,4-b]-thiophene-alt-benzodithiophene (PTB7):[6,6]phenyl C71 butyric acid methyl ester (PC71BM) bulk heterojunction (BHJ) blends processed without additives in different donor/acceptor weight ratios. We show that while blends of a 1:1.5 ratio are composed of large donor-enriched and fullerene domains beyond the exciton diffusion length, reducing the ratio below 1:0.5 leads to blends composed purely of polymer-enriched domains. Importantly, the photocurrent density in such blends can reach values between 45 and 60% of those reached for fully optimized blends using additives. We provide here direct visual evidence that fullerenes in the donor-enriched domains are not distributed homogeneously but fluctuate locally. To this end, we performed compositional nanoscale morphology analysis of the blend using spectroscopic imaging of low-energy-loss electrons using a transmission electron microscope. Charge transport measurement in combination with molecular dynamics simulations shows that the fullerene substructures inside the polymer phase generate efficient electron transport in the polymer-enriched phase. Furthermore, we show that the formation of densely packed regions of fullerene inside the polymer phase is driven by the PTB7:PC71BM enthalpy of mixing. The occurrence of such a nanoscale network of fullerene clusters leads to a reduction of electron trap states and thus efficient extraction of photocurrent inside the polymer domain. Suitable tuning of the polymer-acceptor interaction can thus introduce acceptor subnetworks in polymer-enriched phases, improving the tolerance for high-efficiency BHJ toward morphological defects such as donor-enriched domains exceeding the exciton diffusion length.

Effects of a Fluorinated Donor Polymer on the Morphology, Photophysics, and Performance of All-Polymer Solar Cells Based on Naphthalene Diimide-Arylene Copolymer Acceptors.

Naphthalene diimide (NDI)-biselenophene copolymer (PNDIBS), NDI-selenophene copolymer (PNDIS), and the fluorinated donor polymer PM6 were used to investigate how a fluorinated polymer component affects the morphology and performance of all-polymer solar cells (all-PSCs). Although the PM6:PNDIBS blend system exhibits a high open-circuit voltage (Voc = 0.925 V) and a desired low optical bandgap energy loss (Eloss = 0.475 eV), the overall power conversion efficiency (PCE) was 3.1%. In contrast, PM6:PNDIS blends combine a high Voc (0.967 V) with a high fill factor (FF = 0.70) to produce efficient all-PSCs with 9.1% PCE. Furthermore, the high-performance PM6:PNDIS all-PSCs could be fabricated by various solution processing approaches and at active layer thickness as high as 300 nm without compromising photovoltaic efficiency. The divergent photovoltaic properties of PNDIS and PNDIBS when paired respectively with PM6 are shown to originate from the starkly different blend morphologies and blend photophysics. Efficient PM6:PNDIS blend films were found to exhibit a vertical phase stratification along with lateral phase separation, while the molecular packing had a predominant face-on orientation. Bulk lateral phase separation with both face-on and edge-on molecular orientations featured in the poor-performing PM6:PNDIBS blend films. Enhanced charge photogeneration and suppressed geminate and bimolecular recombinations with 99% charge collection probability found in PM6:PNDIS blends strongly differ from the poor charge collection probability (66%) and high electron-hole pair recombination seen in PM6:PNDIBS. Our findings demonstrate that beyond the generally expected enhancement of Voc, a fluorinated polymer component in all-PSCs can also exert a positive or negative influence on photovoltaic performance via the blend morphology and blend photophysics.

Control of Aromaticity and cis-/trans-Isomeric Structure of Non-Planar Hexaphyrin(2.1.2.1.2.1) and Metal Complexes.

Vinylene-bridged hexaphyrin(2.1.2.1.2.1) was synthesized from dipyrrolyl diphenylethenes by acid-catalyzed condensation reactions. Freebase hexaphyrin(2.1.2.1.2.1) forms a distorted structure with non-aromatic characteristics. The aromaticity and molecular configuration of non-planar hexaphyrin(2.1.2.1.2.1) can be controlled by insertion of metal ions. Freebase and zinc complexes show a distorted structure without macrocyclic aromaticity, whereas copper complexes show a figure-of-eight structure with macrocyclic aromaticity. It is the first example of aromaticity conversion of a distorted expanded porphyrin involving vinylene bridges.

Solid-State, Near-Infrared to Visible Photon Upconversion via Triplet-Triplet Annihilation of a Binary System Fabricated by Solution Casting.

Herein, triplet-triplet annihilation upconversion (TTA-UC) from near-infrared (NIR, 785 nm) to visible (yellow, centered at 570 nm) regions has been demonstrated in the binary solid of condensed chromophores. Microparticles of the binary solid comprising rubrene as a matrix (emitter) and π-extended Pd-porphyrin as a dopant (sensitizer) in a mole ratio of 1000:1 were obtained by solution casting. Excitation intensity dependence and quantum yield (QY) of the upconverted emission were characterized for individual particles under a microscope and revealed a low threshold intensity (∼100 mW/cm2) as compared to the solution and moderate UC-QY (∼0.5%) in the NIR range. The factors contributing to the UC-QY were investigated by time-resolved and steady-state spectroscopies. It was found that the intersystem crossing of the sensitizer, triplet energy transfer, and TTA occurred efficiently in the binary solid, and the fluorescence QY of the emitter governed the UC-QY.

Synthesis of a Porphyrin(2.1.2.1) Nanobelt and Its Ability To Bind Fullerene.

This Letter details a simple and effective method to synthesize a porphyrin(2.1.2.1)-based nanobelt NBNi3 via condensation reactions of 1,2,4,5-tetra(pyrrol-2-yl)benzene and benzaldehydes. NBNi3 consists of three arch-shaped porphyrins(2.1.2.1) and benzene linkages with a C3 h-symmteric structure. The concave-shaped cavity of NBNi3 behaves as a C60 receptor by capturing two C60 cooperatively. Additionally, NBNi3 exhibits reversible oxidation and reduction peaks with five electrons in each peak, indicating that the shape of the nanobelt can stabilize multicationic and anionic states.

[30]Hexaphyrin(2.1.2.1.2.1) as Aromatic Planar Ligand and Its Trinuclear Rhodium(I) Complex.

Expanded porphyrins are attractive research targets because of their large and flexible structures, optical and electrochemical properties, and diverse coordination abilities. We are interested in the use of double bonds within expanded porphyrins because double bonds could conduct isomerization, expansion of π-conjugation, and giving different molecular geometry. We, thus, report [30]hexaphyrin(2.1.2.1.2.1) 3H-1, which was synthesized by a simple condensation reaction of 1,2-di(pyrrol-2-yl)ethene and pentafluorobenzaldehyde under an acidic condition. The compound 3H-1 exhibited 30π aromatic property with a highly planar structure, displaying intense Soret- and weak Q-like absorption bands. The compound 3H-1 has a sufficient space and dipyrrin-like coordination sites in its cavity. Trinuclear rhodium(I) complex 3Rh-1 was obtained with [Rh(CO)2Cl]2 and exhibited six redox potentials.

Synthesis, Characterization and Protonation Behavior of Quinoxaline-Fused Porphycenes.

9,10-Quinoxaline-fused porphycenes 1a-H2 and 1b-H2 were synthesized by intramolecular McMurry coupling. As a result of the annulation of the quinoxaline moiety on the porphycene skeleton, 1a-H2 and 1b-H2 display absorption and fluorescence in the near infra-red (NIR) region. Additionally, the quinoxaline moieties of 1a-H2 and 1b-H2 act as electron-withdrawing groups, introducing lower reduction potentials than for pristine porphycene. The protonation occurred at the nitrogen atoms in the cavity of freebase porphycenes and at the quinoxaline moieties for their nickel complexes to give diprotonic species.

Engineering Thin Films of a Tetrabenzoporphyrin toward Efficient Charge-Carrier Transport: Selective Formation of a Brickwork Motif.

Tetrabenzoporphyrin (BP) is a p-type organic semiconductor characterized by the large, rigid π-framework, excellent stability, and good photoabsorption capability. These characteristics make BP and its derivatives prominent active-layer components in organic electronic and optoelectronic devices. However, the control of the solid-state arrangement of BP frameworks, especially in solution-processed thin films, has not been intensively explored, and charge-carrier mobilities observed in BP-based materials have stayed relatively low as compared to those in the best organic molecular semiconductors. This work concentrates on engineering the solid-state packing of a BP derivative, 5,15-bis(triisopropylsilyl)ethynyltetrabenzoporphyrin (TIPS-BP), toward achieving efficient charge-carrier transport in its solution-processed thin films. The effort leads to the selective formation of a brickwork packing that has two dimensionally extended π-staking. The maximum field-effect hole mobility in the resulting films reaches 1.1 cm2 V-1 s-1, which is approximately 14 times higher than the record value for pristine free-base BP (0.070 cm2 V-1 s-1). This achievement is enabled mainly through the optimization of three factors; namely, deposition process, cast solvent, and self-assembled monolayer that constitutes the dielectric surface. On the other hand, polarized-light microscopy and grazing-incident wide-angle X-ray diffraction analyses show that there remains some room for improvement in the in-plane homogeneity of molecular alignment, suggesting even higher charge-carrier mobilities can be obtained upon further optimization. These results will provide a useful basis for the polymorph engineering and morphology optimization in solution-processed organic molecular semiconductors.

Synthesis and Characterization of an Iridium Triphyrin Complex.

A sandwich complex of iridium(III) benzotriphyrin (2) has been synthesized from free-base benzotriphyrin (1) and [IrCl(cod)]2 (COD = 1,5-cyclooctadiene). The COD ring was transformed from 1,5-COD to an η1,η3-C8H12 unit as a π-allyl ligand associated with the valence change of iridium from IrI to IrIII, as revealed by X-ray diffraction analysis. The Soret-like band of 2 was blue-shifted and broadened compared with that of 1, indicating strong electronic interactions between triphyrin and the iridium ion. Compound 2 also showed very broad absorption in the range of 500-800 nm, which can be assigned to a mixture of Q and metal-to-ligand charge-transfer bands.