RESUMEN
The implementation of an intelligent road network system requires many sensors for acquiring data from roads, bridges, and vehicles, thereby enabling comprehensive monitoring and regulation of road networks. Given this large number of required sensors, the sensors must be cost-effective, dependable, and environmentally friendly. Here, we show a laser upgrading strategy for coal tar, a low-value byproduct of coal distillation, to manufacture flexible strain-gauge sensors with maximum gauge factors of 15.20 and 254.17 for tension and compression respectively. Furthermore, we completely designed the supporting processes of sensor placement, data acquisition, processing, wireless communication, and information decoding to demonstrate the application of our sensors in traffic and bridge vibration monitoring. Our novel strategy of using lasers to upgrade coal tar for use as a sensor not only achieves the goal of turning waste into a resource but also provides an approach to satisfy large-scale application requirements for enabling intelligent road networks.
RESUMEN
Refractory metals offer exceptional benefits for high temperature electronics including high-temperature resistance, corrosion resistance and excellent mechanical strength, while their high melting temperature and poor processibility poses challenges to manufacturing. Here this work reports a direct ink writing and tar-mediated laser sintering (DIW-TMLS) technique to fabricate three-dimensional (3D) refractory metal devices for high temperature applications. Metallic inks with high viscosity and enhanced light absorbance are designed by utilizing coal tar as binder. The printed patterns are sintered into oxidation-free porous metallic structures using a low-power (<10 W) laser in ambient environment, and 3D freestanding architectures can be rapidly fabricated by one step. Several applications are presented, including a fractal pattern-based strain gauge, an electrically small antenna (ESA) patterned on a hemisphere, and a wireless temperature sensor that can work up to 350 °C and withstand burning flames. The DIW-TMLS technique paves a viable route for rapid patterning of various metal materials with wide applicability, high flexibility, and 3D conformability, expanding the possibilities of harsh environment sensors.