Electrohydrodynamic Printing of Microscale Fibrous Scaffolds with a Sinusoidal Structure for Enhancing the Contractility of Cardiomyocytes.

Mimicking the curved collagenous fibers in the cardiac extracellular matrix to fabricate elastic scaffolds in vitro is important for cardiac tissue engineering. Here, we developed sinusoidal polycaprolactone (PCL) fibrous scaffolds with commendable flexibility and elasticity to enhance the contractility of primary cardiomyocytes by employing melt-based electrohydrodynamic (EHD) printing. Microscale sinusoidal PCL fibers with an average diameter of ∼10 µm were printed to mimic the collagenous fibers in the cardiac ECM. The sinusoidal PCL fibrous scaffolds were EHD-printed in a layer-by-layer manner and exhibited outstanding flexibility and elasticity compared with the straight ones. The sinusoidal PCL scaffolds provided an elastic microenvironment for the attaching and spreading of primary cardiomyocytes, which facilitated their synchronous contractive activities. Primary cardiomyocytes also showed improved gene expression and maturation on the sinusoidal PCL scaffolds under electrical stimulation for 5 days. It is envisioned that the proposed flexible fibrous scaffold with biomimetic architecture may serve as a suitable patch for tissue regeneration and repair of damaged hearts after myocardial infarction.

Study on Printability Evaluation of Alginate/Silk Fibroin/Collagen Double-Cross-Linked Inks and the Properties of 3D Printed Constructs.

In recent years, biological 3D printing has garnered increasing attention for tissue and organ repair. The challenge with 3D-printing inks is to combine mechanical properties as well as biocompatibility. Proteins serve as vital structural components in living systems, and utilizing protein-based inks can ensure that the materials maintain the necessary biological activity. In this study, we incorporated two natural biomaterials, silk fibroin (SF) and collagen (COL), into a low-concentration sodium alginate (SA) solution to create novel composite inks. SF and COL were modified with glycidyl methacrylate (GMA) to impart photo-cross-linking properties. The UV light test and 1H NMR results demonstrated successful curing of silk fibroin (SF) and collagen (COL) after modification and grafting. Subsequently, the printability of modified silk fibroin (RSFMA)/SA with varying concentration gradients was assessed using a set of three consecutive printing models, and the material's properties were tested. The research results prove that the addition of RSFMA and ColMA enhances the printability of low-concentration SA solutions, with the Pr values increasing from 0.85 ± 0.02 to 0.90 ± 0.03 and 0.92 ± 0.02, respectively, and the mechanical strength increasing from 0.19 ± 0.01 to 0.28 ± 0.01 and 0.38 ± 0.01 MPa; cytocompatibility has also been improved. Furthermore, rheological tests indicated that all of the inks exhibited shear thinning properties. CCK-8 experiments demonstrated that the addition of ColMA increased the cytocompatibility of the ink system. Overall, the utilization of SF and COL-modified SA materials as inks represents a promising advancement in 3D-printed ink technology.

An enhanced tri-layer bionic periosteum with gradient structure loaded by mineralized collagen for guided bone regeneration and in-situ repair.

Severe fracture non-union often accompanied by damaged or even absent periosteum remains a significant challenge. This paper presents a novel tri-layer bionic periosteum with gradient structure and mineralized collagen (MC) mimics natural periosteum for in-situ repair and bone regeneration. The construct with ultrasonic polylactic acid as the loose outer fibrous layer (UPLA), poly(ε-caprolactone) as the intermediate barrier layer (PCL-M), and poly(ε-caprolactone)/MC as the inner osteoblastic layer (PM) was prepared. The physicochemical properties of layers were investigated. UPLA/PCL-M/PM exhibited a tensile strength (3.55 ± 0.23 MPa) close to that of natural periosteum and excellent adhesion between the layers. In vitro experiments demonstrated that all layers had no toxicity to cells. UPLA promoted inward growth of mouse fibroblasts. PCL-M with a uniform pore size (2.82 ± 0.05 µm) could achieve a barrier effect against fibroblasts according to the live/dead assay. Meanwhile, PM could effectively promote cell migration with high alkaline phosphatase expression and significant mineralization of the extracellular matrix. Besides, in vivo experiments showed that UPLA/PCL-M/PM significantly promoted the regeneration of bone and early angiogenesis. Therefore, this construct with gradient structure developed in this paper would have great application potential in the efficient and high-quality treatment of severe fractures with periosteal defects.

Gelatin­sodium alginate composite hydrogel doped with black phosphorus@ZnO heterojunction for cutaneous wound healing with antibacterial, immunomodulatory, and angiogenic properties.

Hydrogels with novel antimicrobial properties and accelerated wound healing are of great interest in the field of wound dressings because they not only prevent bacterial infections but also fulfill the essential needs of wound healing. In this study, multifunctional hydrogel dressings consisting of black phosphorus nanosheets(BPNS) surface-modified Zinc oxide (BP@ZnO heterojunction) based on gelatin (Gel), sodium alginate (SA), glutamine transferase (mTG), and calcium ions with a three-dimensional crosslinked network were prepared. The BP@ZnO-Gel/SA hydrogel has excellent mechanical properties, hemocompatibility (hemolysis rate: 3.29 %), swelling rate(832.8 ± 19.2 %), cytocompatibility, photothermal and photodynamic antibacterial properties(Sterilization rate: 96.4 ± 3.3 %). In addition, the hydrogel accelerates wound healing by promoting cell migration, immune regulation and angiogenesis. Thus, this hydrogel achieves the triple effect of antimicrobial, immunomodulation and angiogenesis, and is a tissue engineering strategy with great potential.

Electrohydrodynamic Direct-Writing Micro/Nanofibrous Architectures: Principle, Materials, and Biomedical Applications.

Electrohydrodynamic (EHD) direct-writing has recently gained attention as a highly promising additive manufacturing strategy for fabricating intricate micro/nanoscale architectures. This technique is particularly well-suited for mimicking the extracellular matrix (ECM) present in biological tissue, which serves a vital function in facilitating cell colonization, migration, and growth. The integration of EHD direct-writing with other techniques has been employed to enhance the biological performance of scaffolds, and significant advancements have been made in the development of tailored scaffold architectures and constituents to meet the specific requirements of various biomedical applications. Here, a comprehensive overview of EHD direct-writing is provided, including its underlying principles, demonstrated materials systems, and biomedical applications. A brief chronology of EHD direct-writing is provided, along with an examination of the observed phenomena that occur during the printing process. The impact of biomaterial selection and architectural topographic cues on biological performance is also highlighted. Finally, the major limitations associated with EHD direct-writing are discussed.

"As a parent, I want to do more for my child": A phenomenological approach to understanding the experiences of parents involved in surgical decision-making for children with congenital hand anomalies.

BACKGROUND: A congenital anomaly of the hand can affect both function and appearance, and places a stressful psychological burden on the family, especially parents. Surgery during infancy may prevent later disabilities, but little is known of the importance of parents' involvement in these decisions in terms of psychological adjustment or treatment satisfaction. OBJECTIVE: To understand parents' perceptions of involvement in their child's surgery for limb anomaly, and their preferences for the support of healthcare professionals. Results should lead to recommended interventions to improve familial adjustment to the child's condition. METHODS: Qualitative data was collected from semi-structured confidential self-reported interviews of 35 parents (65.7 % mothers) of children who had received reconstructive surgery for congenital hand anomaly (at age 24.89 ± 9.26 months); interviews were coincident with the 1-month postoperative follow-up. The parents ranged in age, gender, educational background, economic status, and type of anomaly. Data analysis referenced Colaizzi's phenomenological approach. RESULTS: The concerns of the parents were consolidated into three themes: attitudes toward Parental involvement in surgical decision-making; status of parental involvement in Surgical decision-making; and need for help and support. CONCLUSION: Some parents were comfortable leaving surgical decisions entirely to the medical staff, but most preferred active participation and were disappointed at their lack of inclusion. The maximum benefit from surgery for congenital abnormalities in infancy is achieved when the parents and extended families have access to the expertise, skills, encouragement, and psychological support of healthcare providers.

Preparation of sodium alginate modified silver-metal organic framework and application in citric acid/PVA antimicrobial packaging.

Silver-metal organic framework (Ag@MOF) has exhibited outstanding antimicrobial activity in antimicrobial applications, and reducing the biotoxicity associated with silver has become a research priority. In this study, Ag@MOF was initially modified with sodium alginate (SA) to form SA-Ag@MOF. The results showed that SA could control the release of Ag+, reducing the release by about 8% at 24 h, and the biotoxicity was significantly reduced. Finally, SA-Ag@MOF was applied as an antimicrobial agent in citric acid-modified PVA film to develop a novel composite antimicrobial film. When added at 2 MIC, the CA3-M2 film can effectively inhibit the growth of E. coli and S. aureus, and the inhibition rate has reached 98%. For white radish packaging applications, CA3-M2 film inhibited the growth of surface microorganisms, while ensuring moisture and tissue hardness to extend shelf-life up to 7 days. Overall, the strategy conceived here can be a theoretical basis for novel antimicrobial packaging.

Harnessing oriented arrangement of collagen fibers by 3D printing for enhancing mechanical and osteogenic properties of mineralized collagen scaffolds.

As the structural basis of connective and load-bearing tissues, collagen fibers with orientation play an important role in the mechanical properties and physiological and biochemical functions of the tissues, but viable methods for preparing scaffolds with highly oriented collagenous structure still need to be further studied. In this study, pure collagen was used as printing ink to 3D printing. Harnessing oriented collagen fiber structure by 3D printing for promoting mechanical and osteogenic properties of scaffolds. The scaffolds with different printed angles and thicknesses were prepared to fit the bone defect site and realize personalized customization. The orientation assembly of collagen fibers was promoted by shear force action of 3D printing, the regular arrangement of collagen fibers and stabilization of fiber structure were promoted by pH adjustment and glutaraldehyde cross-linking, and the collagen fibers were mineralized by cyclic mineralization method. The microscopic morphology of fiber arrangement in the scaffolds were investigated by scanning electron microscopy. Results demonstrated that collagen fibers were changed from non-oriented to oriented after 3D printing. And the tensile modulus of the scaffolds with oriented collagen fibers was nine times higher than that of the scaffolds with non-oriented fibers. Moreover, the effects of oriented collagen fibers on the proliferation, differentiation and mineralization of MC3T3-E1 cells were studied by CCK-8 assay, live/dead cell staining, alkaline phosphatase activity test, and Alizarin red staining. The results indicated that cell proliferation, differentiation and mineralization were significantly promoted by oriented collagen fibers, and the cells proliferated directionally in the direction of the fibers. Taken together, mineralized collagen fiber scaffolds with oriented collagen fibers have great potential in bone tissue engineering applications.

Improving osseointegration and antimicrobial properties of titanium implants with black phosphorus nanosheets-hydroxyapatite composite coatings for vascularized bone regeneration.

For decades, titanium implants have shown impressive advantages in bone repair. However, the preparation of implants with excellent antimicrobial properties as well as better osseointegration ability remains difficult for clinical application. In this study, black phosphorus nanosheets (BPNSs) were doped into hydroxyapatite (HA) coatings using electrophoretic deposition. The coatings' surface morphology, roughness, water contact angle, photothermal properties, and antibacterial properties were investigated. The BP/HA coating exhibited a surface roughness of 59.1 nm, providing an ideal substrate for cell attachment and growth. The water contact angle on the BP/HA coating was measured to be approximately 8.55°, indicating its hydrophilic nature. The BPNSs demonstrated efficient photothermal conversion, with a temperature increase of 42.2°C under laser irradiation. The BP/HA composite coating exhibited a significant reduction in bacterial growth, with inhibition rates of 95.6% and 96.1% against Staphylococcus aureus and Escherichia coli. In addition, the cytocompatibility of the composite coating was evaluated by cell adhesion, CCK8 and AM/PI staining; the effect of the composite coating in promoting angiogenesis was assessed by scratch assay, transwell assay, and protein blotting; and the osteoinductivity of the composite coating was evaluated by alkaline phosphatase assay, alizarin red staining, and Western blot. The results showed that the BP/HA composite coating exhibited superior performance in promoting biological functions such as cell proliferation and adhesion, antibacterial activity, osteogenic differentiation, and angiogenesis, and had potential applications in vascularized bone regeneration.

[Progress in antibacterial coatings of titanium implants surfaces].

In recent years, bone implant materials such as titanium and titanium alloys have been widely used in the biomedical field due to their excellent mechanical properties and good biocompatibility. However, in clinical practice, bacterial adhesion to the material surface and postoperative infection issues may lead to implantation failure. Based on the antibacterial mechanism, this review elaborated on the antibacterial surface design of titanium implants from the aspects of anti-bacterial adhesion, contact sterilization and photocontrol sterilization. Surface modification of titanium or titanium-based alloy implants with different techniques can inhibit bacteria and promote osseointegration. Thus, the application range of multifunctional titanium-based implants in the field of orthopedics will be expanded.

Enhancing osseointegration of titanium implants through MC3T3-E1 protein-gelatin polyelectrolyte multilayers.

Titanium and its alloys have found extensive use in the biomedical field, however, implant loosening due to weak osseointegration remains a concern. Improved surface morphology and chemical composition can enhance the osseointegration of the implant. Bioactive molecules have been utilized to modify the surface of the titanium-based material to achieve rapid and efficient osseointegration between the implant and bone tissues. In this study, the bioactive substance MC3T3-E1 protein-gelatin polyelectrolyte multilayers were constructed on the surface of the titanium implants by means of layer-by-layer self-assembly to enhance the strength of the bond between the bone tissue and the implant. The findings of the study indicate that the layer-by-layer self-assembly technique can enhance surface roughness and hydrophilicity to a considerable extent. Compared to pure titanium, the hydrophilicity of TiOH LBL was significantly increased with a water contact angle of 75.0 ± $$ \pm $$ 2.4°. The modified titanium implant exhibits superior biocompatibility and wound healing ability upon co-culture with cells. MC3T3-E1 cells were co-cultured with TiOH LBL for 1, 3, and 5 days and their viability was higher than 85%. In addition, the wound healing results demonstrate that TiOH LBL exhibited the highest migratory ability (243 ± 10 µm). Furthermore, after 7 days of osteogenic induction, the modified titanium implant significantly promotes osteoblast differentiation.

Hydroxyapatite/Polyurethane Scaffolds for Bone Tissue Engineering.

Polyurethane (PU) and PU ceramic scaffolds are the principal materials investigated for developing synthetic bone materials due to their excellent biocompatibility and biodegradability. PU has been combined with calcium phosphate (such as hydroxyapatite [HA] and tricalcium phosphate) to prepare scaffolds with enhanced mechanical properties and biocompatibility. This article reviews the latest progress in the design, synthesis, modification, and biological attributes of HA/PU scaffolds for bone tissue engineering. Diverse HA/PU scaffolds have been proposed and discussed in terms of their osteogenic, antimicrobial, biocompatibility, and bioactivities. The application progress of HA/PU scaffolds in bone tissue engineering is predominantly introduced, including bone repair, bone defect filling, drug delivery, and long-term implants.

Toenail Composite Tissue Flap as a Novel Reconstructive Approach in the Treatment of Macrodactyly of Foot.

BACKGROUND: The microsurgical technique has been used to dissect macrodactyly into a composite tissue flap with arteries, veins, and toenail phalanxes to reconstruct the deformed toe into a near-normal one. METHODS: This study retrospectively collected relevant data from ten patients undergoing toenail composite tissue flaps to reconstruct their macrodactyly. This case series included two female and eight male pediatric patients with a mean age of 27.2 months (8-64 months), who had been followed for average 24.3 months after the reconstruction surgery (3-57 months). The American Orthopedic Foot and Ankle Society Scale (AOFAS) score was obtained by the operating surgeons before and after the reconstruction operation while all the patients completed the postoperative questionnaires. RESULTS: The reconstruction surgery took an average of three hours with minimal intraoperative blood loss. The postoperative score of the AOFAS scale was significantly improved from the one before the surgery (33.3+/-12.4 vs. 76.3+/-10, p≤0.001). The average score obtained from the postoperative questionnaires for foot macrodactyly was 9.4 in the range between 0 and 10 for the functional and aesthetic restorations. All reconstructed toes were viable without signs of infection or necrosis and possessed satisfactory function and appearance during the follow-up period after the reconstruction surgeries. CONCLUSION: It is feasible and effective to dissect a macrodactyly into a composite tissue flap for being reconstructed into a nearly normal toe.

The self-regulating on cohesion properties of calcium phosphate/ calcium sulfate bone cement improved by citric acid/sodium alginate.

Calcium phosphate cement (CPC) has attracted extensive interest from surgeons and materials scientists. However, the collapsibility of calcium phosphate cement limits its clinical application. In this work, a gel network of SA-CA formed by the reaction of citric acid (CA) and sodium alginate (SA) was introduced into the α-TCP/α-CSH composite. Furthermore, a high proportion of α-CSH provided more calcium sources for the system to combine with SA forming a gel network to improve the cohesion property of the composite, which also played a regulating role in the conversion of materials to HA. The morphology, physicochemical properties, and cell compatibility of the composites were studied with SA-CA as curing solution. The results show that SA-CA plays an important role in the compressive strength and collapse resistance of bone cement, and its properties can be regulated by changing the content of CA. When CA is 10 wt%, the mechanical strength is the highest, reaching 12.49 ± 2.03 MPa, which is 265.80% higher than water as the solidifying liquid. In addition, the cell experiments showed that the samples were not toxic to MC3T3 cells. The results of ALP showed that when SA-CA were used as curing solution, the activity of ALP was higher than that of blank sample, indicating that the composite bone cement could be conducive to the differentiation of osteoblasts. In this work, the α-CSH/α-TCP based composite regulated by gel network of SA-CA can provide a promising strategy to improve the cohesion of bone cement.

[Progress in preparation and application of sodium alginate microspheres].

Sodium alginate (SA) is a kind of natural polymer material extracted from kelp, which has excellent biocompatibility, non-toxicity, biodegradability and abundant storage capacity. The formation condition of sodium alginate gel is mild, effectively avoiding the inactivation of active substances. After a variety of preparation methods, sodium alginate microspheres are widely used in the fields of biomaterials and tissue engineering. This paper reviewed the common methods of preparing alginate microspheres, including extrusion, emulsification, electrostatic spraying, spray drying and coaxial airflow, and discussed their applications in biomedical fields such as bone repair, hemostasis and drug delivery.

Complexation-Induced Resolution Enhancement Pleiotropic Small Diameter Vascular Constructs with Superior Antibacterial and Angiogenesis Properties.

3D printing has been widely applied for preparing artificial blood vessels, which will bring innovation to cardiovascular disorder intervention. However, the printing resolution and anti-infection properties of small-diameter vessels (Φ < 6 mm) have been challenging in 3D printing. The primary objective of this research is to design a novel coaxial 3D-printing postprocessing method for preparing small-size blood vessels with improved antibacterial and angiogenesis properties. The coaxial printing resolution can be more conveniently improved. Negatively charged polyvinyl alcohol (PVA) and alginate (Alg) interpenetrating networks artificial vessels are immersed in positively charged chitosan (CTS) solution. Rapid dimensional shrinkage takes place on its outer surface through electrostatic interactions. The maximum shrinkage size of wall thickness can reach 61.2%. The vessels demonstrate strong antibacterial properties against Escherichia coli (98.8 ± 0.5%) and Staphylococcus aureus (97.6 ± 1.4%). In rat dorsal skin grafting experiments, Cu2+ can promote angiogenesis by regulating hypoxia-inducible factor-1 pathway. No artificial blood vessel blockage occurs after 5 days of blood circulation in vitro.

Bifunctional electrospun poly (L-lactic acid) membranes incorporating black phosphorus nanosheets and nano-zinc oxide for enhanced biocompatibility and antibacterial properties in catheter materials.

For several decades, urinary tract infections caused by catheter-associated devices have negatively impacted not only medical device utilization, but also patient health. As such, the creation of catheter materials with both superior biocompatibility and antibacterial properties has become necessary. This study aimed to produce electrospun membranes based on polylactic acid (PLA) with the incorporation of black phosphorus nanosheets (BPNS) and nano-zinc oxide (nZnO) particles, as well as a mixture of both, in order to design bifunctional membranes with enhanced bioactivity and antibacterial features. The optimum spinning process was determined through examination of various PLA mass concentrations, spinning solution propelling speeds, and receiving drum rotating speeds, with emphasis on the mechanical properties of PLA membranes. Additionally, the antibacterial properties and cytocompatibility of the ZnO-BP/PLA antibacterial membranes were explored. Results demonstrated that the ZnO-BP/PLA antibacterial membranes displayed a rich porous structure, with uniform distribution of nZnO particles and BPNS. With the increase of polylactic acid concentration and the decrease of spinning solution advancing and drum rotation speeds, the mechanical properties of the fiber membrane were significantly improved. Furthermore, the composite membranes exhibited remarkable photothermal therapy (PTT) capabilities when aided by the synergistic effect of BP nanosheets and ZnO. This was achieved through near-infrared (NIR) irradiation, which not only dissipated the biofilm but also enhanced the release capability of Zn2+. Consequently, the composite membrane demonstrated an improved inhibitory effect on both Escherichia coli and Staphylococcus aureus. The results of cytotoxicity and adhesion experiments also indicated good cytocompatibility, with cells growing normally on the surface of the ZnO-BP/PLA antibacterial membrane. Overall, these findings validate the utilization of both BPNS and n-ZnO fillers in the creation of novel bifunctional PLA-based membranes, which possess both biocompatibility and antibacterial properties for interventional catheter materials.

Multifunctional Fe3O4-PEI@HA nanoparticles in the ferroptosis treatment of hepatocellular carcinoma through modulating reactive oxygen species.

Ferroptosis is a novel form of regulated cell death induced by iron-dependent lipid peroxidation imbalance. It has emerged as a promising antitumor therapeutic strategy in recent years. In this work, we successfully synthesized a complex magnetic nanocube Fe3O4 modified with PEI and HA by the thermal decomposition method. While loading a ferroptosis inducer RSL3 inhibited cancer cells through the ferroptosis signal transduction pathway. The drug delivery system could actively target tumor cells through an external magnetic field and HA-CD44 binding. Zeta potential analysis showed that Fe3O4-PEI@HA-RSL3 nanoparticles were more stable and uniformly dispersed in tumor acidic environment. Moreover, cellular experiments demonstrated that Fe3O4-PEI@HA-RSL3 nanoparticles could significantly inhibit the proliferation of hepatoma cells without a cytotoxic effect on normal hepatic cells. In addition, Fe3O4-PEI@HA-RSL3 played a vital role in ferroptosis by accelerating ROS production. The expression of ferroptosis-related genes Lactoferrin, FACL 4, GPX 4 and Ferritin was significantly suppressed with increasing treatment of Fe3O4-PEI@HA-RSL3 nanocubes. Therefore, this ferroptosis nanomaterial has great potential in Hepatocellular carcinoma (HCC) therapy.

Fabrication of gelatin methacryloyl/graphene oxide conductive hydrogel for bone repair.

The ideal bone repair materials possess a series of properties, such as injectability, good mechanical properties and bone inducibility. In the present study, gelatin methacryloyl (GelMA) and graphene oxide (GO) were selected to prepare conductive hydrogel by changing the concentration of GelMA and GO during the cross-link process. The effects of different contents of GelMA and GO to the hydrogel performance were investigated. The results showed that the mechanical properties of the hydrogel kept 16.37 ± 1.89 KPa after adding 0.1% GO, while the conductivity was improved to 1.36 ± 0.09 µS/cm. The porosity of hydrogel before and after mineralization could reach more than 90%. The mechanical properties of mineralized hydrogel was improved significantly, could reach 26.38 ± 2.29 KPa. Cell experiments indicated that the mineralized hydrogel with electrical stimulation obviously improve the alkaline phosphatase activity of the cells. GelMA/GO conductive hydrogel could be a promising candidate for bone repair and bone tissue engineering.

The study of self-regulating α-TCP based composite by micro/nano scaled silk fibroin and α-CSH on physicochemical and biological properties of bone cement.

A novel self-hardening α-tricalcium phosphate (α-TCP) bone cement complexed with different content of α-calcium sulfate hemihydrate (α-CSH) and micrometer hydroxyapatite mineralized silk fibroin (HA-SF) using micro/SF as curing liquid has been investigated in this work, which was capable of tunable setting time, degradation, mechanical property and ability to anti-washout. After addition 0 ∼ 25% α-CSH to the α-TCP cement with SFFs as curing liquid, it shortened the setting time of the modified composite to 10 ∼ 30 min. Furthermore, the addition of SFFs improved the compressive strength of the composite from 5.41 MPa to 9.44 MPa. The composites with both Na2HPO4 and SFFs as curing liquid showed good anti-collapse performance. The weight loss ratio of bone cement was -0.18 ∼ 12.08% in 4 weeks when the content of α-CSH in α-TCP/α-CSH was between 0 ∼ 25 wt%. During the degradation of α-CSH, the amorphous α-TCP were deposited as hydroxyapatite to formed a plate-like products on the surface of composite. Compared to the composite with Na2HPO4 solution as the curing liquid, alkaline phosphatase (ALP) activity of the composites using SFFs as curing liquid were maintained at high levels on the 14th day especially when the Ca/P ratio was 1.7. This study provides a theoretical basis for the regeneration of bone defects guided by bone cement materials.