RESUMEN
Potassium metal battery is an appealing candidate for future energy storage. However, its application is plagued by the notorious dendrite proliferation at the anode side, which entails the formation of vulnerable solid electrolyte interphase (SEI) and non-uniform potassium deposition on the current collector. Here, this work reports a dual-modification design of aluminum current collector to render dendrite-free potassium anodes with favorable reversibility. This work achieves to modulate the electronic structure of the designed current collector and accordingly attain an SEI architecture with robust inorganic-rich constituents, which is evidenced by detailed cryo-EM inspection and X-ray depth profiling. The thus-produced SEI manages to expedite ionic conductivity and guide homogeneous potassium deposition. Compared to the potassium metal cells assembled using typical aluminum current collector, cells based on the designed current collector realize improved rate capability (maintaining 400 h under 50 mA cm-2 ) and low-temperature durability (stable operation at -50 °C). Moreover, scalable production of the current collector allows for the sustainable construction of high-safety potassium metal batteries, with the potential for reducing the manufacturing cost.
RESUMEN
Constructing a conductive carbon-based artificial interphase layer (AIL) to inhibit dendritic formation and side reaction plays a pivotal role in achieving longevous Zn anodes. Distinct from the previously reported carbonaceous overlayers with singular dopants and thick foreign coatings, a new type of N/O co-doped carbon skin with ultrathin feature (i.e., 20 nm thickness) is developed via the direct chemical vapor deposition growth over Zn foil. Throughout fine-tuning the growth conditions, mosaic nanocrystalline graphene can be obtained, which is proven crucial to enable the orientational deposition along Zn (002), thereby inducing a planar Zn texture. Moreover, the abundant heteroatoms help reduce the solvation energy and accelerate the reaction kinetics. As a result, dendrite growth, hydrogen evolution, and side reactions are concurrently mitigated. Symmetric cell harvests durable electrochemical cycling of 3040 h at 1.0 mA cm-2 /1.0 mAh cm-2 and 136 h at 30.0 mA cm-2 /30.0 mAh cm-2 . Assembled full battery further realizes elongated lifespans under stringent conditions of fast charging, bending operation, and low N/P ratio. This strategy opens up a new avenue for the in situ construction of conductive AIL toward pragmatic Zn anode.
RESUMEN
Micro-sized silicon (µSi) anode features fewer interfacial side reactions and lower costs compared to nanosized silicon, and has higher commercial value when applied as a lithium-ion battery (LIB) anode. However, the high localized stress generated during (de)lithiation causes electrode breakdown and performance deterioration of the µSi anode. In this work, hollow graphitic carbons with tailored dual sizes are employed as conductive additives for the µSi anode to overcome electrode failure. The dual-size hollow graphitic carbons (HGC) additives consist of particles with micrometer size similar to the µSi particles; these additives are used for strain regulation. Additionally, nanometer-size particles similar to commercial carbon black Spheron (SP) are used mainly for kinetics acceleration. In addition to building an efficient conductive network, the dual-size hollow graphitic carbon conductive additive prevents the fracture of the electrode by reducing local stress and alleviating volume expansion. The µSi anode with dual-size hollow graphitic carbons as conductive additives achieves an impressive capacity of 651.4 mAh g-1 after 500 cycles at a high current density of 2 A g-1 . These findings suggest that dual-size hollow graphitic carbons are expected to be superior conductive additives for micro-sized alloy anodes similar to µSi.
RESUMEN
The direct growth of graphene affording wafer-scale uniformity on insulators is paramount to electronic and optoelectronic applications; however, it remains a challenge to date, because it entails an entirely different growth mode than that over metals. Herein, the metal-catalyst-free growth of quasi-suspended graphene on a Si wafer is demonstrated using an interface-decoupling chemical vapor deposition strategy. The employment of lower-than-conventional H2 dosage and concurrent introduction of methanol during growth can effectively weaken the interaction between the synthesized graphene and the underlying substrate. The growth mode can be thus fine-tuned, producing a predominantly monolayer graphene film with wafer-level homogeneity. Graphene thus grown on a 4 inch Si wafer enables the transfer-free fabrication of high-performance graphene-based field-effect transistor arrays that exhibit almost no shift in the charge neutral point, indicating a quasi-suspended feature of the graphene. Moreover, a carrier mobility up to 15 000 cm2 V-1 s-1 can be attained. This study is anticipated to offer meaningful insights into the synthesis of wafer-scale high-quality graphene on dielectrics for practical graphene devices.
RESUMEN
Potassium (K)-metal batteries have emerged as a promising energy-storage device owing to abundant K resources. An anode-free architecture that bypasses the need for anode host materials can deliver an elevated energy density. However, the poor efficiency of K plating/stripping on potassiophobic anode current collectors results in rapid K inventory loss and a short cycle life. Herein, commercial Al foils are decorated with an ultrathin graphene-modified layer (Al@G) through roll-to-roll plasma-enhanced chemical vapor deposition. By harnessing strong adhesion (10.52 N m-1 ) and a high surface energy (66.6 mJ m-2 ), the designed Al@G structure ensures a highly smooth and ordered K plating/stripping process. Consequently, during K-metal plating/stripping, Al@G can operate at a current density of up to 4.0 mA cm-2 and cyclic capacity of up to 4.0 mAh cm-2 , with an ultralong lifespan of up to 1000 h at 0.5 mA cm-2 and stable cycling of up to 750 h under periodic current fluctuations of 0.1-2.0 mA cm-2 . In addition, a novel anode-free K-metal full-cell prototype enabled by Al@G anode current collectors is constructed, demonstrating ameliorative cyclic stability.
RESUMEN
Lithium-rich cathodes (LRCs) show great potential to improve the energy density of commercial lithium-ion batteries owing to their cationic and anionic redox characteristics. Herein, a complete conductive network using carbon nanotubes (CNTs) additives to improve the poor kinetics of LRCs is fabricated. Ex situ X-ray photoelectron spectroscopy first demonstrates that the slope at a low potential and the following long platform can be assigned to the transition metal and oxygen redox, respectively. The combination of galvanostatic intermittent titration technique and electrochemical impedance spectroscopy further reveal that a battery with CNTs exhibited accelerated kinetics, especially for the O-redox process. Consequently, LRCs with CNTs exhibit a much better rate and cycling performance (≈89% capacity retention at 2 C for over 200 cycles) than the Super P case. Eventually, TEM results imply that the improved electrochemical performance of the CNTs case also benefits from its more stable bulk and surface structures. Such a facile conductive additive modification strategy also provides a universal approach for the enhancement of the electron diffusion properties of other electrode materials.
RESUMEN
Although graphite materials with desirable comprehensive properties dominate the anode market of commercial lithium-ion batteries (LIBs), their low capacity during fast charging precludes further commercialization. In the present work, natural graphite (G) is reported not only to suffer from low capacity during fast charging, but also from charge failure after many charging cycles. Using different characterization techniques, severe graphite exfoliation, and continuously increasing solid electrolyte interphase (SEI) are demonstrated as reasons for the failure of G samples. An ultrathin artificial SEI is proposed, addressing these problems effectively and ensuring extremely stable operation of the graphite anode, with a capacity retention of ≈97.5% after 400 cycles at 1 C. Such an artificial SEI modification strategy provides a universal approach to tailoring and designing better anode materials for next-generation LIBs with high energy densities.
RESUMEN
Potassium-ion hybrid capacitors (PIHCs) have been considered as an emerging device to render grid-scale energy storage. Nevertheless, the sluggish kinetics at the anode side and limited capacity output at the cathode side remain daunting challenges for the overall performances of PIHCs. Herein, an exquisite "homologous strategy" to devise multi-dimensional N-doped carbon nanopolyhedron@nanosheet anode and activated N-doped hierarchical carbon cathode targeting high-performance PIHCs is reported. The anode material harnessing a dual-carbon structure and the cathode candidate affording a high specific surface area (2651 m2 g-1 ) act in concert with a concentrated ether-based electrolyte, resulting in an excellent half cell performance. The related storage mechanism is systematically revealed by in situ electrokinetic characterizations. More encouragingly, the thus-derived PIHC full cell demonstrates a favorable energy output (157 Wh kg-1 ), showing distinct advantages over the state-of-the-art PIHC counterparts.