RESUMEN
Artificial intelligence has revolutionized many sectors with unparalleled predictive capabilities supported by machine learning (ML). So far, this tool has not been able to provide the same level of development in pharmaceutical nanotechnology. This review discusses the current data science methodologies related to polymeric drug-loaded nanoparticle production from an innovative multidisciplinary perspective while considering the strictest data science practices. Several methodological and data interpretation flaws were identified by analyzing the few qualified ML studies. Most issues lie in following appropriate analysis steps, such as cross-validation, balancing data, or testing alternative models. Thus, better-planned studies following the recommended data science analysis steps along with adequate numbers of experiments would change the current landscape, allowing the exploration of the full potential of ML.
[Box: see text].
Asunto(s)
Inteligencia Artificial , Ciencia de los Datos , Aprendizaje Automático , Nanopartículas , Nanopartículas/química , Humanos , Ciencia de los Datos/métodos , Nanotecnología/métodos , Polímeros/químicaRESUMEN
Considering the health relevance of Chagas' disease, recent research efforts have focused on developing more efficient drug delivery systems containing nifurtimox (NFX). This paper comprehensively investigates NFX through conformational analysis and spectroscopic characterization. Using a conformer-rotamer ensemble sampling tool (CREST-xtb), five distinct conformers of NFX were sampled within a 3.0 kcal mol-1 relative energy window. Subsequently, such structures were used as inputs for geometry optimization by density functional theory (DFT) at B3LYP-def2-TZVP level of theory. Notably, harmonic vibrational frequencies were calculated to establish an in-depth comparison with experimental results and existing literature for the NFX or similar molecules and functional groups, thereby achieving a widely reasoned assignment of the mid-infrared band absorptions for the first time. Moreover, UV-VIS spectra of NFX were obtained in several solvents, enabling the determination of the molar absorptivity coefficient for the two electronic transitions observed for NFX. Among the aprotic solvents, a bathochromic effect was observed in the function of the dielectric constants. Furthermore, a hypochromic effect was observed when the drug was dissolved in protic solvents. These findings offer crucial support for new drug delivery systems containing NFX while demonstrating the potential of spectrophotometric studies in establishing quality control assays for NFX drug products.
Asunto(s)
Enfermedad de Chagas , Conformación Molecular , Nifurtimox , Enfermedad de Chagas/tratamiento farmacológico , Nifurtimox/química , Espectrofotometría Ultravioleta , Tripanocidas/química , Modelos Moleculares , Teoría Funcional de la Densidad , Trypanosoma cruzi/efectos de los fármacos , Solventes/químicaRESUMEN
This work aimed to develop a three-dimensional (3D) wearable drug-loaded earring tap to treat affections caused by aesthetic perforations. The initial phase involved a combination of polymers to prepare filaments for fused deposition modeling (FDM) 3D printing using a centroid mixture design. Optimized filament compositions were used in the second phase to produce 3D printed earring taps containing the anti-inflammatory naringenin. Next, samples were assessed via physicochemical assays followed by in vitro skin permeation studies with porcine ear skin. Two filament compositions were selected for the study's second phase: one to accelerate drug release and another with slow drug dissolution. Both filaments demonstrated chemical compatibility and amorphous behavior. The use of the polymer blend to enhance printability has been confirmed by rheological analysis. The 3D devices facilitated naringenin skin penetration, improving drug recovery from the skin's most superficial layer (3D device A) or inner layers (3D device B). Furthermore, the devices significantly decreased transdermal drug delivery compared to the control containing the free drug. Thus, the resulting systems are promising for producing 3D printed earring taps with topical drug delivery and reinforcing the feasibility of patient-centered drug administration through wearable devices.
RESUMEN
Despite nifurtimox (NFX) being a traditional drug for treating Chagas disease, some of its physicochemical properties are still unknown, especially its thermal behavior, which brings important outcomes regarding stability and compatibility. In this work, a comprehensive study of NFX's thermal properties was conducted to assist incremental innovations that can improve the efficacy of this drug in novel pharmaceutical products. For this purpose, thermal analyses associated with spectroscopy and spectrometry techniques were used. DSC analyses revealed that the melt crystallization of the NFX led to its amorphous form with the possible formation of a minor fraction of a different crystalline phase. Coats-Redfern method using TGA results indicated the activation energy of NFX non-isothermal degradation as 348.8 ± 8.2 kJ mol-1, which coincides with the C-NO2 bond dissociation energy of the 2-nitrofuran. Investigation of the isothermal degradation kinetics using FTIR 2D COS showed the possible detachment of radical NO2 and ethylene from the NFX structure, which could affect its mechanism of action. A preliminary mechanism for the thermal degradation of this drug was also proposed. The results enhanced the understanding of NFX's thermal properties, providing valuable insights, especially for developing NFX-based pharmaceutical products that involve thermal processing.
Asunto(s)
Nifurtimox , Nitrofuranos , Nifurtimox/metabolismo , Nifurtimox/uso terapéutico , Cristalización , Dióxido de Nitrógeno , Preparaciones FarmacéuticasRESUMEN
Alopecia areata is managed with oral corticosteroids, which has known side effects for patients. Given that a topical application of formulations containing a corticoid and a substance controlling hair loss progression could reduce or eliminate such adverse effects and increase the patient's adherence to the treatment, this study prepares polymeric and lipidic nanoparticles (PNPs and NLCs) to co-entrap minoxidil and betamethasone and compares the follicular drug delivery provided by topical application of these nanoparticles. The prepared PNPs loaded 99.1 ± 13.0% minoxidil and 70.2 ± 12.8% betamethasone, while the NLCs entrapped 99.4 ± 0.1 minoxidil and 80.7 ± 0.1% betamethasone. PNPs and NLCs presented diameters in the same range, varying from 414 ± 10 nm to 567 ± 30 nm. The thermal analysis revealed that the production conditions favor the solubilization of the drugs in the nanoparticles, preserving their stability. In in vitro permeation studies with porcine skin, PNPs provided a 2.6-fold increase in minoxidil penetration into the follicular casts compared to the control and no remarkable difference in terms of betamethasone; in contrast, NLCs provided a significant (specifically, a tenfold) increase in minoxidil penetration into the hair follicles compared to the control, and they delivered higher concentrations of betamethasone in hair follicles than both PNPs and the control. Neither PNPs nor NLCs promoted transdermal permeation of the drugs to the receptor solution, which should favor a topical therapy. Furthermore, both nanoparticles targeted approximately 50% of minoxidil delivery to the follicular casts and NLCs targeted 74% of betamethasone delivery to the hair follicles. In conclusion, PNPs and NLCs are promising drug delivery systems for enhancing follicular targeting of drugs, but NLCs showed superior performance for lipophilic drugs.
RESUMEN
BACKGROUND: To describe the incidence of endophthalmitis and the treatment outcomes of acute bacterial endophthalmitis following intravitreal anti-vascular endothelial growth factor (anti-VEGF) injections in a Brazilian hospital. The analysis was based on the timing of infection after intravitreal injection, culture results, visual acuity, and the presence of epiretinal membrane after a 1-year follow-up period, spanning nine years. METHODS: This retrospective case series, conducted over a 9-year period, aimed to evaluate the treatment outcomes of acute endophthalmitis following intravitreal Bevacizumab injections. The inclusion criteria involved a chart review of 25 patients who presented clinical signs of acute endophthalmitis out of a total of 12,441 injections administered between January 2011 and December 2019. Negative culture results of vitreous samples or incomplete data were excluded. Ultimately, 23 patients were enrolled in the study. Eight patients were treated with intravitreal antibiotic injections (IVAI) using vancomycin 1.0 mg/0.05mL and ceftazidime 2.25 mg/0.05mL, while 15 patients underwent pars plana vitrectomy (PPV) followed by intravitreal antibiotic injections at the end of surgery (IVAIES). The main outcome measures were the efficacy of controlling the infection with IVAI as a standalone therapy compared to early PPV followed by IVAIES. Data collected included pre-infection and one-year post-treatment best corrected visual acuity (BCVA), optical coherence tomography (OCT) abnormalities, and enucleation/evisceration rates. To compare groups, Mann-Whitney and ANOVA tests were employed for statistical analysis. RESULTS: The incidence rate of bacterial endophthalmitis was 0.185% (1/541 anti-VEGF injections), with the highest infection rates observed in 2014 and 2017. Patients presented clinical symptoms between 2 and 7 days after injection. The most common isolated organisms were coagulase-negative Staphylococci and Streptococci spp. Treatment outcomes showed that both IVAI and PPV + IVAIES effectively controlled the infection and prevented globe atrophy. After one year, the PPV group with BCVA better than Light Perception had a significantly better BCVA compared to the IVAI group (p 0.003). However, PPV group had higher incidence of epiretinal membranes formation compared to the IVAI group. (P 0.035) CONCLUSION: Anti-VEGF injections carry a risk of developing acute bacterial endophthalmitis. Isolated antibiotic therapy could be an effective treatment to control the infection, but performing PPV + IVAIES as a primary treatment showed promising results in terms of improving BCVA after one year, despite a higher rate of epiretinal membrane formation. Further studies are needed to confirm these findings.
RESUMEN
INTRODUCTION: Although the administration of drugs on the skin is a safe and noninvasive therapeutic alternative, producing formulations capable of disrupting the cutaneous barriers is still a challenge. In this scenario, extrusion-based techniques have emerged as disruptive technologies to ensure unique drug-excipient interactions that facilitate drug skin diffusion for systemic or local effect and even mean the key to obtain viable industrial products. AREAS COVERED: This article presents a comprehensive overview of extrusion-based techniques in developing pharmaceutical dosage forms for topical or transdermal drug delivery. First, the theoretical basis of how extrusion-based techniques can optimize the permeation of drugs through the skin is examined. Then, the current state-of-the-art of drug products developed by extrusion-based techniques, specifically by hot-melt extrusion (HME) and fused deposition modeling (FDM) 3D printing, are discussed and contrasted with the current pharmaceutical processes. EXPERT OPINION: A wide variety of pharmaceutical products can be obtained using HME and FDM 3D printing, including new dosage forms designed for a perfect anatomical fit. Despite the limitations of pharmaceutical products produced with HME and FDM 3D printing regarding thermal stability and available excipients, the advantages in industrial adaptability and improved bioavailability allied with patient-match devices certainly deserve full attention and investment.
Asunto(s)
Tecnología de Extrusión de Fusión en Caliente , Tecnología Farmacéutica , Humanos , Tecnología Farmacéutica/métodos , Preparaciones Farmacéuticas , Composición de Medicamentos/métodos , Administración Cutánea , Excipientes , Liberación de Fármacos , Sistemas de Liberación de Medicamentos/métodos , ComprimidosRESUMEN
OBJECTIVE: Assess the acute effects of a high-intensity resistance training session on central blood pressure (CBP) parameters of elderly hypertensive women. METHODS: Forty physically active hypertensive women were included in resistance training and control protocols. Resistance training exercises were bench press, leg press and lat pull-down. The resistance training protocol consisted of three sets of 10 repetitions to volitional failure with 90âs of rest between sets. No exercise was performed in the control protocol. CBP parameters were measured in four moments: before (PRE), immediately after (T0), 30âmin (T30) and 60âmin (T60) following both protocols. RESULTS: Resistance training significantly increased central SBP (cSBP) 107.4â±â16.3 vs. 117.5â±â16.7), augmentation index ((24.9â±â12.7 vs. 33.1â±â12.0), pulse wave velocity (PWV 9.7â±â1.0 vs. 10.3â±â1.1), peripheral pulse pressure (pPP 48.5â±â11.7 vs. 58.9â±â13.1), central pulse pressure (cPP 38.3â±â11.6 vs. 46.5â±â13.1) and amplified pulse pressure (ampPP 10.2â±â4.2 vs. 12.4â±â5.6) immediately after exercises. The comparison between groups showed higher values of cSBP (117.5â±â16.7 vs. 106.3â±â14.6), augmentation index (20.9â±â11.0 vs. 33.1â±â12.0), pPP (46.6â±â11.0 vs. 58.9â±â13.1) and cPP (36â±â10.2 vs. 46.5â±â13.1) at T0. After 30âmin, all variables returned to the baseline values. CONCLUSION: High-intensity resistance training session increased CBP parameters immediately after exercises, but those changes were not sustained after 30âmin.
Asunto(s)
Hipertensión , Entrenamiento de Fuerza , Anciano , Femenino , Humanos , Presión Sanguínea/fisiología , Ejercicio Físico/fisiología , Hipertensión/terapia , Análisis de la Onda del Pulso , Entrenamiento de Fuerza/métodosRESUMEN
OBJECTIVE: The objective of this study was to evaluate the clinical evolution of coronavirus disease 2019 (COVID-19) in children and adolescents with cancer. METHODS: Cohort involving patients undergoing cancer treatment, 19 years old and under, with the diagnosis of COVID-19 by real-time polymerase chain reaction, in a reference hospital, between March 2020 and November 2021. Data were collected from medical records and interviews with patients and/or guardians. The primary outcomes studied were severe/critical COVID-19 presentation, deaths from any cause and overall survival. The Cox proportional hazards multivariate regression analysis was performed to determine the risk of death. RESULTS: Sixty-two participants were included, most (67.7%) were male, with a median age of 6.8 years. Severe/critical forms of COVID-19, observed in 24.2%, seemed to indicate that the pediatric population undergoing cancer treatment has a higher morbidity rate than the general pediatric population (8-9.2%). During follow-up (4.5-18 months), 20 patients (32.3%) completed their cancer treatment and 18 died (29%)-6 during hospitalization and 12 after discharge. In total 61.1% of deaths occurred within 63 days of a detectable real-time polymerase chain reaction. Patients with a higher risk of death presented with severe/critical COVID-19 [adjusted hazard risk (aHR): 8.51; 95% confidence interval (CI): 2.91-24.80; P < 0.00] solid tumors (aHR: 3.99; 95% CI: 1.43-11.12; P = 0.008) and diarrhea as a symptom of COVID-19 (aHR: 3.9; 95% CI: 1.23-12.73; P = 0.021). CONCLUSIONS: These findings support the impact that severe acute respiratory syndrome-associated coronavirus 2 infection has on the population of children and adolescents with cancer, not only regarding immediate severity but also in their survival rate. Further studies evaluating long-term outcomes of COVID-19 in children and adolescents with cancer should be encouraged.
Asunto(s)
COVID-19 , Neoplasias , Humanos , Niño , Masculino , Adolescente , Adulto Joven , Adulto , Femenino , Estudios de Cohortes , Hospitalización , Hospitales , Neoplasias/complicaciones , Neoplasias/epidemiologíaRESUMEN
Coração em criss-cross (ou coração entrecruzado) foi descrito pela primeira vez em 1974. Trata-se de uma malformação cardíaca congênita, rara, ocorrendo 8 casos a cada 1.000.000 de crianças, e representando somente 0,1% das malformações congênitas. Os métodos diagnósticos de escolha são o ecocardiograma transtorácico, a ressonância magnética cardíaca (RMC), a angiotomografia (TC) e, eventualmente, o cateterismo cardíaco. Neste relato, descreve-se o caso de um recém-nascido com coração em criss-cross somado à dupla via de saída do ventrículo direito (VD), com vasos mal posicionados, além de comunicação interatrial (CIA), comunicação interventricular (CIV), displasia de valva tricúspide e veia cava superior esquerda persistente. Não se sabe a etiologia exata dessa malformação, mas parece ocorrer pela rotação dos ventrículos em seu eixo longitudinal, não acompanhada das rotações atrial e das valvas atrioventriculares (AV). Esse movimento produz uma alteração das vias de entrada dos ventrículos, determinando que o VD se posicione em plano superior e o esquerdo em plano inferior. Apesar de ainda não se saber a exata causa dessa anomalia, acredita-se que uma alteração genética possa estar levando a esses casos: a mutação do gene Cx43. O diagnóstico do caso em questão foi dado pela ecocardiografia transtorácica e da TC de aorta e artérias pulmonares, que mostraram, além do criss-cross, outras alterações, como dupla via de saída do VD, CIA e CIV amplas.(AU)
Criss-cross heart was first described in 1974. It is a rare congenital heart malformation that occurs in 8 cases per 1,000,000 children, and represents only 0.1% of congenital malformations. The diagnostic methods of choice are transthoracic echocardiography, cardiac magnetic resonance (CMR), computed tomography angiography (CT) and, sometimes, cardiac catheterization. This report describes the case of a newborn with a criss-cross heart in addition to double-outlet right ventricle (RV), with poorly positioned vessels, in addition to atrial septal defect (ASD), interventricular septal defect, tricuspid valve dysplasia and persistent left superior vena cava. The exact etiology of this malformation is not known, but it seems to occur due to rotation of the ventricles in their longitudinal axis, not accompanied by rotation of the atrial and atrioventricular (AV) valves. This movement produces abnormal ventricular inlets, determining that the RV be positioned on a superior plane and the left ventricle on an inferior plane. Although the exact cause of this anomaly is still unknown, it is believed that a genetic abnormality may be leading to these cases: mutation of the Cx43 gene. Diagnosis of the case concerned was given by transthoracic echocardiography and computed CT of the aorta and pulmonary arteries, which showed, in addition to the criss-cross heart, other abnormalities, such as double-outlet RV, large ASD and ventricular septal defect (VSD).(AU)
Asunto(s)
Humanos , Masculino , Recién Nacido , Corazón con Ventrículos Entrecruzados/etiología , Corazón con Ventrículos Entrecruzados/diagnóstico por imagen , Cardiopatías Congénitas/diagnóstico , Ventrículos Cardíacos/anomalías , Ventrículo Derecho con Doble Salida/diagnóstico , Ecocardiografía/métodos , Cateterismo Cardíaco/métodos , Espectroscopía de Resonancia Magnética/métodos , Tomografía Computarizada por Rayos X/métodos , Vena Cava Superior Izquierda Persistente/diagnóstico , Defectos del Tabique Interatrial/diagnósticoRESUMEN
Chironomus sancticaroli is a tropical species, easy to grow and to maintain in laboratory cultures. It has a fast reproduction cycle, under adequate conditions, around 30 days, allowing it to have many generations per year, an important criterion for selecting a test organism in ecotoxicology. Its life stages include: eggs, four larval instars (one planktonic and three benthic), pupa and adult (midges) This study aimed to: (1) review the methods for C. sancticaroli cultivation and its use in ecotoxicological tests, (2) establish a laboratory culture of C. sancticaroli, presenting the difficulties and discussing the ways to overcome them. Early 4th instar larvae was the most used in acute studies, while the 1st instar larvae (early 1st instar) was the most used in chronic studies; 96 h and 28 days were the most frequent durations in acute and chronic studies, respectively. The most common endpoints evaluated were organisms' survival and development, and most of the ecotoxicological studies using C. sancticaroli were performed in laboratory. Most of the tested contaminants were pesticides and these had the most adverse effects on organisms. Most mesocosms with environmental contaminated samples did not show adverse effects on C. sancticaroli. Chronic and field studies as well as those testing the effects of the mixture contaminants on C. sancticaroli were still deficient. Keeping the laboratory environment and equipment effectively sanitized was important as well as maintaining stabilized conditions of temperature, photoperiod, physical, chemical and biological water quality in cultures.
Asunto(s)
Chironomidae , Contaminantes Químicos del Agua , Animales , Ecotoxicología , Larva , PupaRESUMEN
Aesthetic perforations are often associated with health issues, such as itching, inflammation, or microbial infection. Accordingly, this work proposed a lacquer to be applied on the adornment accessory forming a film from which a proper drug is released. For this, lacquers were formulated containing three different permeation enhancers (limonene - LIM, propylene glycol - PG, and oleic acid - AO) combined according to a mixture design with a model anti-inflammatory natural drug (naringenin) and a soluble film-former polymer (polyvinyl alcohol). Formulations were characterized by physicochemical tests and in vitro and in vivo skin permeation studies. The lacquers were stable and provided a vectorized drug release. LIM, combined with one of the other permeation enhancers, showed a synergic effect, enhancing topical skin penetration in vitro by 53% while preventing permeation to the receptor medium. The in vivo evaluation of lacquers in rodent models showed these systems could provide higher levels of drug retention in the ear (166.4 ± 14.9 µg per ear for F4 and 174.9 ± 29.3 µg per ear for F5) compared to the control (109.2 ± 16.3 µg) without allowing its permeation into the bloodstream, confirming the local drug delivery. Moreover, the anti-inflammatory activity was achieved in the animal model developed for lacquer application on the earring, obtaining inhibition of ear swelling up to 40.8% ± 2.3 compared to the untreated ear. Thus, such an innovative lacquer proved a promising vehicle for treating affections caused by adornments, enhancing skin permeation while avoiding a systemic effect.
Asunto(s)
Laca , Ácido Oléico , Animales , Limoneno , Alcohol Polivinílico/farmacología , Piel , Propilenglicol/química , Estética , Administración CutáneaRESUMEN
One of the challenges in developing three-dimensional printed medicines is related to their stability due to the manufacturing conditions involving high temperatures. This work proposed a new protocol for preformulation studies simulating thermal processing and aging of the printed medicines, tested regarding their morphology and thermal, crystallographic, and spectroscopic profiles. Generally, despite the strong drug-polymer interactions observed, the chemical stability of the model drugs was preserved under such conditions. In fact, in the metoprolol and Soluplus® composition, the drug's solubilization in the polymer produced a delay in the drug decomposition, suggesting a protective effect of the matrix. Paracetamol and polyvinyl alcohol mixture, in turn, showed unmistakable signs of thermal instability and chemical decomposition, in addition to physical changes. In the presented context, establishing protocols that simulate processing and storage conditions may be decisive for obtaining stable pharmaceutical dosage forms using three-dimensional printing technology.
RESUMEN
Polymeric nanocapsules have extensive application potential in medical, biological, and pharmaceutical fields, and, therefore, much research has been dedicated to their production. Indeed, production protocols and the materials used are decisive for obtaining the desired nanocapsules characteristics and biological performance. In addition to that, several technological strategies have been developed in the last decade to improve processing techniques and form more valuable nanocapsules. This review provides a guide to current methods for developing polymeric nanocapsules, reporting aspects to be considered when choosing appropriate materials, and discussing different ways to produce nanocapsules for superior performances.
Asunto(s)
Nanocápsulas , PolímerosRESUMEN
Fused deposition modeling (FDM) 3D printing has demonstrated high potential for the production of personalized medicines. However, the heating at high temperatures inherent to this process causes unknown risks to the drug product's stability. The present study aimed to assess the use of a tailored preformulation protocol involving physicochemical assessments, including the rheological profiles of the samples, to guide the development of medicines by FDM 3D printing. For this, polymers commonly used in FDM printing, i.e., high impact polystyrene (HIPS), polylactic acid (PLA), and polyvinyl alcohol (PVA), and their common plasticizers (mineral oil, triethyl citrate, and glycerol, respectively) were evaluated using the thermolabile model drug isoniazid (INH). Samples were analyzed by chemical and physical assays. The results showed that although the drug could produce polymorphs under thermal processing, the polymeric matrix can be a protective element, and no polymorphic transformation was observed. However, incompatibilities between materials might impact their chemical, thermal, and rheological performances. In fact, ternary mixtures of INH, PLA, and TEC showed a major alteration in their viscoelastic behavior besides the chemical changes. On the other hand, the use of plasticizers for HIPS and PVA exhibited positive consequences in drug solubility and rheologic behavior, probably improving sample printability. Thus, the optimization of the FDM 3D printing based on preformulation studies can assist the choice of compatible components and seek suitable processing conditions to obtain pharmaceutical products.
Asunto(s)
Excipientes , Tecnología Farmacéutica , Liberación de Fármacos , Impresión Tridimensional , SolubilidadRESUMEN
Abstract Objectives: to describe epidemiological characteristics and deaths in children with cancer and COVID-19 at a reference hospital in Recife, Brazil. Methods: cohort involving children under the age of 19 underwent cancer treatment during April to July 2020. During the pandemic, real-time reverse transcriptase polymerase chain reaction assay (RT-PCR) for severe acute respiratory syndrome coronavirus 2 (SARS -CoV-2) in nasal / oropharyngeal swab were collected in symptomatic patients or before hospitalization. Those with detectable results were included in this cohort study. The outcomes were delayed on cancer treatment and death. Descriptive analysis was performed and presented in preliminary results. Results: 48 children participated in the cohort, mostly with hematological neoplasms (66.6%.),69% were male, median age was 5.5 years. The most frequent symptoms were fever (58.3%) and coughing (27.7%);72.9% required hospitalization, 20% had support in ICU and 10.5% on invasive ventilatory assistance.66.6% of the patients had their oncological treatment postponed, 16.6% died within 60 days after confirmation of SARS-CoV-2 infection. Conclusions: COVID-19 led a delay in the oncological treatment for children with cancer and a higher mortality frequency when compared to the historical series of the service. It would be important to analyze the risk factors to determine the survival impact.
Resumo Objetivos: descrever características epidemiológicas e óbitos em crianças com câncer e a doença do novo coronavírus 2019 (COVID-19), em hospital de referência do nordeste brasileiro. Métodos: coorte envolvendo menores de 19 anos em tratamento de câncer, durante abril a julho de 2020. Pacientes sintomáticos ou antes de hospitalização foram submetidos a pesquisa do vírus severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), por meio de reação em cadeia da polimerase com transcrição reversa em tempo real (RT-PCR), em swab naso/orofaríngeo. Foram incluídos aqueles com resultado detectável. Os desfechos foram atraso no tratamento oncológico e óbito. Realizada análise descritiva e apresentado os resultados preliminares. Resultados: 48 crianças, maioria com neoplasia hematológica (66,6%), sexo masculino (69%), mediana de idade 5,5 anos. os sintomas mais observados foram febre (58,3%) e tosse (27,7%); 72,9% necessitou internamento hospitalar, 20% suporte em unidade de terapia intensiva (UTI) e 10,5 % assistência ventilatória invasiva. O tratamento oncológico foi adiado em 66,6% dos pacientes, 16,6 % evoluiu para óbito até 60 dias após confirmação da infecção pelo SARS-CoV-2. Conclusões: COVID-19 determinou atraso no tratamento oncológico das crianças com câncer e aumento da frequência de óbitos quando comparada à série histórica do serviço. Será importante analisar os fatores de risco para determinar o impacto na sobrevida.
Asunto(s)
Humanos , Masculino , Femenino , Recién Nacido , Lactante , Preescolar , Niño , Adolescente , Factores de Riesgo , Mortalidad , SARS-CoV-2 , COVID-19/epidemiología , Neoplasias/mortalidad , Brasil/epidemiología , Reacción en Cadena de la Polimerasa , Estudios de Cohortes , Prueba de Ácido Nucleico para COVID-19RESUMEN
Here, we assessed the feasibility of hot-melt extrusion (HME) to obtain effervescent drug products for the first time. For this, a combined mixture design was employed using paracetamol as a model drug. Extrudates were obtained under reduced torque (up to 0.3 Nm) at 100 °C to preserve the stability of the effervescent salts. Formulations showed vigorous and rapid effervescent disintegration (<3 min), adequate flow characteristics, and complete solubilization of paracetamol instantly after the effervescent reaction. Formulations containing PVPVA in the concentration range of 15-20% m/m were demonstrated to be sensitive to accelerated aging conditions, undergoing marked microstructural changes, since the capture of water led to the agglomeration and loss of their functional characteristics. HPMC matrices, in contrast, proved to be resistant to storage conditions in high relative humidity, showing superior performance to controls, including the commercial product. Moreover, the combined mixture design allowed us to identify significant interactions between the polymeric materials and the disintegrating agents, showing the formulation regions in which the responses are kept within the required levels. In conclusion, this study demonstrates that HME can bring important benefits to the elaboration of effervescent drug products, simplifying the production process and obtaining formulations with improved characteristics, such as faster disintegration, higher drug solubilization, and better stability.
RESUMEN
Increased aging of the general population is a well-known fact with serious effects on health systems worldwide. Skin aging involves various immunological and structural changes that increase the risk of numerous skin diseases such as contact dermatitis. Contact dermatitis is characterized by an inflammation of the skin caused by an interaction between the skin and external agents and is divided into irritant and allergic contact dermatitis. Irritant contact dermatitis occurs on skin areas directly exposed to irritant substances, which results in a stream of pro-inflammatory cytokines mediating the skin injury. Asteatotic and perineal irritant contact dermatitis are the most important subtypes of irritant contact dermatitis in the elderly. Allergic contact dermatitis is a T cell-mediated inflammatory reaction and requires a prior sensitization. The most common allergens responsible for allergic contact dermatitis in the elderly are fragrance mix, nickel, and balsam of Peru. Elderly patients with stasis dermatitis, chronic wounds, and chronic venous insufficiency have an increased prevalence of sensitization due to the frequent exposure to topical treatments. In this review, the most common types of contact dermatitis in the elderly are enumerated in order to assist dermatologists and other physicians to identify contact dermatitis in this distinct group of the population.
Asunto(s)
Envejecimiento/efectos de los fármacos , Alérgenos/toxicidad , Dermatitis Alérgica por Contacto/etiología , Dermatitis Irritante/etiología , Piel/efectos de los fármacos , Anciano , Envejecimiento/efectos de la radiación , Dermatitis Alérgica por Contacto/inmunología , Dermatitis Alérgica por Contacto/terapia , Dermatitis Irritante/inmunología , Dermatitis Irritante/terapia , Manejo de la Enfermedad , Femenino , Humanos , Masculino , Prevalencia , Factores de Riesgo , Piel/efectos de la radiaciónRESUMEN
OBJETIVO: Descrever a utilização de plantas medicinais por pacientes hipertensos e/ou diabéticos atendidos em unidades de atenção primária à saúde e em um ambulatório especializado. MÉTODOS: Pesquisa quantitativa, descritiva, exploratória e transversal, realizada em 16 Unidades de Atenção Primária à Saúde da Regional VI e em um ambulatório especializado do Hospital Universitário Walter Cantídio, em Fortaleza, Ceará, Brasil, de abril de 2014 a janeiro de 2015, com 122 participantes. Realizou-se uma entrevista, na qual foi aplicado um formulário composto por 41 perguntas, distribuídas em três partes: dados sociodemográficos; dados sobre a patologia, tratamento e adesão medicamentosa convencional; e dados sobre uso de plantas medicinais. A análise descritiva e inferencial dos dados partiu do programa Statistical Package for the Social Sciences, versão 20.0. RESULTADOS: Dos 122 participantes, 66 (54,09%) eram do nível terciário de atenção, 50,82% eram maiores de 60 anos (n=62), 70,49% eram mulheres (n=86), 31,97% apresentavam ensino fundamental incompleto (n= 39), 45,08% eram aposentados/pensionistas (n=55), 55,74% viviam com companheiro (n=68) e 32,79% eram hipertensos/diabéticos (n=40). Verificou-se associação significativa entre uso de plantas e nível de atenção (p=0,0001), escolaridade (p=0,021) e patologia de base (p=0,0001). CONCLUSÃO: O uso de plantas medicinais se faz presente na população pesquisada e a elevada prevalência da utilização requer mais estudos acerca dos benefícios e malefícios dessa prática, bem como a capacitação dos profissionais envolvidos, com consequente segurança, eficácia e consumo racional pelos pacientes.
OBJECTIVE: To describe the use of medicinal plants by hypertensive and/or diabetic patients served by primary health care centers and at a specialized outpatient clinic. METHODS: A quantitative, descriptive, exploratory and cross-sectional study was carried out with 122 participants in 16 Primary Health Care Centers run by the VI Regional Executive Secretariat and at a specialized outpatient clinic of the Walter Cantídio Teaching Hospital in Fortaleza, Ceará, Brazil, from April 2014 to January 2015. Interviews were carried out using a form with 41 questions distributed into three sections: sociodemographic data; data on the disease, treatment and conventional medication adherence; and data on the use of medicinal plants. Descriptive and inferential analysis of data was performed using the Statistical Package for the Social Sciences version 20.0. RESULTS: Of the 122 patients, 66 (54.09%) received tertiary care, 50.82% were older than 60 years (n=62), 70.49% were women (n=86), 31.97% had incomplete primary education (n=39), 45.08% were retired/pensioners (n=55), 55.74% lived with a partner (n=68) and 32.79% were hypertensive/diabetics (n=40). Use of plants was significantly associated with level of care (p=0.0001), education (p=0.021) and underlying disease (p=0.0001). CONCLUSION: The use of medicinal plants was present in the study population and the high prevalence of the use points to the need of further studies about the benefits and harms of this practice, the training of the professionals involved, and, consequently, the safety, efficacy, and rational use by the patients.
OBJETIVO: Describir la utilización de plantas medicinales por pacientes hipertensos y/o diabéticos asistidos en unidades de atención primaria de salud y ambulatorio especializado. MÉTODOS: Investigación cuantitativa, descriptiva, exploratoria y transversal realizada en 16 Unidades de Atención Primaria de Salud de la Regional VI y en un ambulatorio especializado del Hospital Universitario Walter Cantídio de Fortaleza, Ceará, Brasil, entre abril de 2014 y enero de 2015 con 122 participantes. Se realizó una entrevista en la cual se aplicó un formulario con 41 preguntas distribuidas en tres partes: los datos sociodemográficos; los datos sobre la patología, el tratamiento y la adhesión medicamentosa convencional; y los datos sobre el uso de plantas medicinales. Para el análisis descriptivo e inferencial de los datos se utilizó la versión 20.0 del programa Statistical Package for the Social Sciences. RESULTADOS: Entre los 122 participantes, 66 (54,09%) eran del nivel terciario de atención, el 50,82% tenían más de 60 años (n=62), el 70,49% eran mujeres (n=86), el 31,97% tenían la educación primaria incompleta (n= 39), el 45,08% eran jubilados/pensionistas (n=55), el 55,74% vivían con compañero (n=68) y el 32,79% eran hipertensos/diabéticos (n=40). Se verificó una asociación significativa entre el uso de plantas y el nivel de atención (p=0,0001), la escolaridad (p=0,021) y la patología de base (p=0,0001). CONCLUSIÓN: El uso de plantas medicinales está presente en la población investigada y la elevada prevalencia de su utilización requiere más estudios sobre los beneficios y maleficios de esa práctica así como la capacitación de los profesionales involucrados, con consecuente seguridad, eficacia y consumo racional de parte de los pacientes.