Comfortable wearable thermoelectric generator with high output power.

Wearable thermoelectric generators provide a reliable power generation method for self-powered wearable electronic devices. However, there has been a lack of research regarding the comfort of wearable thermoelectric generators. Here we propose a design for a comfortable wearable thermoelectric generators system with high output power based on sandwiched thermoelectric model. This model paves the way for simultaneously optimizing comfort (skin temperature and pressure perception) and output power by systematically considering a variety of thermal resistive environments and bending states, the properties of the thermoelectric and encapsulation materials, and the device structure. To verify this strategy, we fabricate wearable thermoelectric generators using Mg-based thermoelectric materials. These materials have great potential for replacing traditional Bi2Te3-based materials and enable our wearable thermoelectric generators with a power density of 18.4 µWcm-2 under a wearing pressure of 0.8 kPa and with a skin temperature of 33 °C, ensuring the wearer's comfort.

A comprehensive predictive model for postoperative joint function in robot-assisted total hip arthroplasty patients: combining radiomics and clinical indicators.

Total hip arthroplasty (THA) effectively treats various end-stage hip conditions, offering pain relief and improved joint function. However, surgical outcomes are influenced by multifaceted factors. This research aims to create a predictive model, incorporating radiomic and clinical information, to forecast post-surgery joint function in robot-assisted THA (RA-THA) patients. The study set comprised 136 patients who underwent unilateral RA-THA, which were subsequently partitioned into a training set (n = 95) and a test set (n = 41) for analysis. Preoperative CT imaging was employed to derive 851 radiomic characteristics, selecting those with an intra-class correlation coefficient > 0.75 for analysis. Least absolute shrinkage and selection operator regression reduced redundancy to six significant radiomic features. Clinical data including preoperative Visual Analog Scale (VAS), Harris Hip Score (HHS), and Western Ontario and McMaster University Osteoarthritis Index (WOMAC) score were collected. Logistic regression identified significant predictors, and three models were developed. Receiver operating characteristic and decision curves evaluated the models. Preoperative VAS, HHS, WOMAC score, and radiomics feature scores were significant predictors. In the training set, the AUCs were 0.835 (clinical model), 0.757 (radiomic model), and 0.891 (combined model). In the test set, the AUCs were 0.777 (clinical model), 0.824 (radiomic model), and 0.881 (combined model). The constructed nomogram prediction model combines radiological features with relevant clinical data to accurately predict functional outcomes 3 years after RA-THA. This model has significant prediction accuracy and broad clinical application prospects and can provide a valuable reference for formulating personalized treatment plans and optimizing patient management strategies.

Circular RNA-encoded oncogenic PIAS1 variant blocks immunogenic ferroptosis by modulating the balance between SUMOylation and phosphorylation of STAT1.

BACKGROUND: The clinical response rate to immune checkpoint blockade (ICB) therapy in melanoma remains low, despite its widespread use. Circular non-coding RNAs (circRNAs) are known to play a crucial role in cancer progression and may be a key factor limiting the effectiveness of ICB treatment. METHODS: The circRNAs that were downregulated after coadministration compared with single administration of PD-1 inhibitor administration were identified through RNA-seq and Ribo-seq, and thus the circPIAS1 (mmu_circ_0015773 in mouse, has_circ_0008378 in human) with high protein coding potential was revealed. Fluorescence in situ hybridization (FISH) assays were conducted to determine the localization of circPIAS1 in human and mouse melanoma cells, as well as its presence in tumor and adjacent tissues of patients. Validation through dual-luciferase reporter assay and LC-MS/MS confirmed the ability of circPIAS1 to encode a novel 108 amino acid polypeptide (circPIAS1-108aa). Specific antisense oligonucleotides (ASOs) targeting the junction site of circPIAS1 were developed to reduce its intracellular levels. Proliferation changes in melanoma cells were assessed using CCK8, EdU, and colony formation assays. The impact of circPIAS1-108aa on the ferroptosis process of melanoma cells was studied through GSH, MDA, and C11-BODIPY staining assays. Western Blot, Immunoprecipitation (IP), and Immunoprecipitation-Mass Spectrometry (IP-MS) techniques were employed to investigate the impact of circPIAS1-108aa on the P-STAT1/SLC7A11/GPX4 signaling pathway, as well as its influence on the balance between STAT1 SUMOylation and phosphorylation. Additionally, a melanoma subcutaneous transplanted tumor mouse model was utilized to examine the combined effect of reducing circPIAS1 levels alongside PD-1 inhibitor. RESULTS: Compared with the group treated with PD-1 inhibitor alone, circPIAS1 was significantly down-regulated in the coadministration group and demonstrated higher protein coding potential. CircPIAS1, primarily localized in the nucleus, was notably upregulated in tumor tissues compared to adjacent tissues, where it plays a crucial role in promoting cancer cell proliferation. This circRNA can encode a unique polypeptide consisting of 108 amino acids, through which it exerts its cancer-promoting function and impedes the effectiveness of ICB therapy. Mechanistically, circPIAS1-108aa hinders STAT1 phosphorylation by recruiting SUMO E3 ligase Ranbp2 to enhance STAT1 SUMOylation, thereby reactivating the transduction of the SLC7A11/GPX4 signaling pathway and restricting the immunogenic ferroptosis induced by IFNγ. Furthermore, the combination of ASO-circPIAS1 with PD-1 inhibitor effectively inhibits melanoma growth and significantly enhances the efficacy of immune drugs in vivo. CONCLUSIONS: Our study uncovers a novel mechanism regarding immune evasion in melanoma driven by a unique 108aa peptide encoded by circPIAS1 in melanoma that dramatically hinders immunogenic ferroptosis triggered by ICB therapy via modulating the balance between SUMOylation and phosphorylation of STAT1. This work reveals circPIAS1-108aa as a critical factor limiting the immunotherapeutic effects in melanoma and propose a promising strategy for improving ICB treatment outcomes.

Computed tomography radiomics in predicting patient satisfaction after robotic-assisted total knee arthroplasty.

PURPOSE: After robotic-assisted total knee arthroplasty (RA-TKA) surgery, some patients still experience joint discomfort. We aimed to establish an effective machine learning model that integrates radiomic features extracted from computed tomography (CT) scans and relevant clinical information to predict patient satisfaction three months postoperatively following RA-TKA. MATERIALS AND METHODS: After careful selection, data from 142 patients were randomly divided into a training set (n = 99) and a test set (n = 43), approximately in a 7:3 ratio. A total of 1329 radiomic features were extracted from the regions of interest delineated in CT scans. The features were standardized using normalization algorithms, and the least absolute shrinkage and selection operator regression model was employed to select radiomic features with ICC > 0.75 and P < 0.05, generating the Rad-score as feature markers. Univariate and multivariate logistic regression was then used to screen clinical information (age, body mass index, operation time, gender, surgical side, comorbidities, preoperative KSS score, preoperative range of motion (ROM), preoperative and postoperative HKA angle, preoperative and postoperative VAS score) as potential predictive factors. The satisfaction scale ≥ 20 indicates patient satisfaction. Finally, three prediction models were established, focusing on radiomic features, clinical features, and their fusion. Model performance was evaluated using Receiver Operating Characteristic curves and decision curve analysis. RESULTS: In the training set, the area under the curve (AUC) of the clinical model was 0.793 (95% CI 0.681-0.906), the radiomic model was 0.854 (95% CI 0.743-0.964), and the combined radiomic-clinical model was 0.899 (95% CI 0.804-0.995). In the test set, the AUC of the clinical model was 0.908 (95% CI 0.814-1.000), the radiomic model was 0.709 (95% CI 0.541-0.878), and the combined radiomic-clinical model was 0.928 (95% CI 0.842-1.000). The AUC of the radiomic-clinical model was significantly higher than the other two models. The decision curve analysis indicated its clinical application value. CONCLUSION: We developed a radiomic-based nomogram model using CT imaging to predict the satisfaction of RA-TKA patients at 3 months postoperatively. This model integrated clinical and radiomic features and demonstrated good predictive performance and excellent clinical application potential.

Three-gene signature revealing the dynamics of lymphocyte infiltration in subchondral bone during osteoarthritis progression.

Osteoarthritis (OA), a degenerative joint disorder, has an unclear immune infiltration mechanism in subchondral bone (SCB). Thus, this study aims to discern immune infiltration variations in SCB between early- and late-stages of OA and identify pertinent biomarkers. Utilizing the GSE515188 bulk-seq profile from the Gene Expression Omnibus database, we performed single-sample gene-set enrichment analysis alongside weighted gene co-expression network analysis to identify key cells and immune-related genes (IRGs) involved in SCB at both stages. At the meanwhile, differentially expressed genes (DEGs) were identified in the same dataset and intersected with IRGs to find IR-DEGs. Protein-protein interaction network and enrichment analyses and further gene filtering using LASSO regression led to the discovery of potential biomarkers, which were then validated by ROC curve analysis, single-cell RNA sequencing, qRT-PCR, western blot and immunofluorescence. ScRNA-seq analysis using GSE196678, qRT-PCR, western blot and immunofluorescence results confirmed the upregulation of their expression levels in early-stage OA SCB samples. Our comprehensive analysis revealed lymphocytes infiltration as a major feature in early OA SCB. A total of 13 IR-DEGs were identified, showing significant enrichment in T- or B-cell activation pathways. Three of them (CD247, POU2AF1, and TNFRSF13B) were selected via the LASSO regression analysis, and results from the ROC curve analyses indicated the diagnostic efficacy of these 3 genes as biomarkers. These findings may aid in investigating the mechanisms of SCB immune infiltration in OA, stratifying OA progression, and identifying relevant therapeutic targets.

Effective Nonstoichiometric Strategy Combined Post-annealing Process for Boosting Thermoelectric Properties in n-Type PbTe.

The intrinsic low electrical properties have hindered the enhancement of thermoelectric performance for n-type PbTe over a long period of time, primarily due to the generation of intrinsic Pb vacancies and other defects. In this work, PbTe samples with nonstoichiometric excess Pb atoms were successfully prepared by a melting reaction followed by spark plasma sintering. First, the introduction of precisely controlled excess Pb atoms has effectively eliminated the typical p-n transition phenomenon in PbTe systems by suppressing the generation of Pb vacancies. Further, the vacuum annealing process employed in nonstoichiometric samples increases the carrier mobility significantly because of the improved crystallinity and the lowered holes. Thus, the Hall mobility was optimized from 754.3 to 1215.9 cm2 V-1 s-1, while the power factor was ultimately elevated from 3087.8 to 4565.7 µW m-1 K-2 for the Pb1.03Te sample at 323 K. Benefited from the enhanced electrical transport properties near room temperature, an average zT ∼ 1.03 ranging from 323 to 723 K was achieved, demonstrating an outstanding performance in n-type nondoped PbTe. This work provides guidance for optimizing the thermoelectric performance of n-type PbTe and relevant telluride by reducing vacancies and other defects.

Ice shelf basal channel shape determines channelized ice-ocean interactions.

Growing evidence has confirmed the critical role played by basal channels beneath Antarctic ice shelves in both ice shelf stability and freshwater input to the surrounding ocean. Here we show, using a 3D ice shelf-ocean boundary current model, that deeper basal channels can lead to a significant amplification in channelized basal melting, meltwater channeling, and warming and salinization of the channel flow. All of these channelized quantities are also modulated by channel width, with the level of modulation determined by channel height. The explicit quantification of channelized basal melting and the meltwater transport in terms of channel cross-sectional shape is potentially beneficial for the evaluation of ice shelf mass balance and meltwater contribution to the nearshore oceanography. Complicated topographically controlled circulations are revealed to be responsible for the unique thermohaline structure inside deep channels. Our study emphasizes the need for improvement in observations of evolving basal channels and the hydrography inside them, as well as adjacent to the ice front where channelized meltwater emerges.

Effect of recombinant human erythropoietin combined with iron sucrose on postoperative hemoglobin in patients undergoing artificial joint replacement.

With the aging of the population, an increasing number of elderly patients are opting for artificial joint replacement, leading to the exploration of various rapid rehabilitation programs in the perioperative period. In this study, we aimed to investigate the effectiveness of combining recombinant human erythropoietin and iron sucrose in altering the range and trend of postoperative hemoglobin in patients undergoing arthroplasty. Specifically, we will examine whether this combination can effectively alter the rise and fall of postoperative haemoglobin, identify the inflection point of haemoglobin change or recovery after arthroplasty, and assess the effect of treatment on serum iron in postoperative blood. We conducted a retrospective study of 138 patients who underwent unilateral total joint arthroplasty by the same surgeon in the same hospital before July 2022. The results of this study may provide valuable insights for the development of effective rehabilitation programs for patients undergoing arthroplasty.

Two-dimensional superconducting nature of Bi2Sr2CaCu2O8+δ thin films revealed by BKT transition.

High-quality Bi2Sr2CaCu2O8+δ superconducting thin films are successfully grown on a SrTiO3 substrate by the Pulsed Laser Deposition technique. Superconducting critical transition temperatures Tc,zero have reached up to 85 K by using optimized growth parameters. In addition, we demonstrated the two-dimensional nature of the superconductivity of thin films by virtue of exhibiting Berezinskii-Kosterlitz-Thouless (BKT) physics and anisotropic magnetic response. Furthermore, three distinct regimes are identified based on the analysis of direct current resistance. The non-Fermi liquid phase and BKT phase fluctuation zone almost perfectly merge together, which implies that the system undergoes a unique topological state that is determined by the BKT phase fluctuation preceding the onset of the superconducting state. The emergence of such a topological state radically differentiates from the three-dimensional superconducting transition, which spontaneously breaks the gauge symmetry. The current studies on the Bi2Sr2CaCu2O8+δ superconducting thin films provide some new insights for understanding the rich quantum states of matter that emerge in the vicinity of the superconducting phase transition and highlight the significant role of BKT fluctuation on two-dimensional superconducting transition.

Charge transfer engineering to achieve extraordinary power generation in GeTe-based thermoelectric materials.

By the fine manipulation of the exceptional long-range germanium-telluride (Ge─Te) bonding through charge transfer engineering, we have achieved exceptional thermoelectric (TE) and mechanical properties in lead-free GeTe. This chemical bonding mechanism along with a semiordered zigzag nanostructure generates a notable increase of the average zT to a record value of ~1.73 in the temperature range of 323 to 773 K with ultrahigh maximum zT ~ 2.7. In addition, we significantly enhanced the Vickers microhardness numbers (Hv) to an extraordinarily high value of 247 Hv and effectively eliminated the thermal expansion fluctuation at the phase transition, which was problematic for application, by the present charge transfer engineering process and concomitant formation of microstructures. We further fabricated a single-leg TE generator and obtained a conversion efficiency of ~13.4% at the temperature difference of 463 K on a commercial instrument, which is located at the pinnacle of TE conversion.

Difference Between Screw Cement Filling and Adequate Osteotomy With Thick Liner for Primary Total Knee Arthroplasty in Patients With Rand IIb Tibial Defects.

BACKGROUND: The effectiveness of 2 treatment options, screw-cement fill, and adequate osteotomy with a thick liner, in treating patients with Rand IIb tibial defects (tibial plateau defects to a depth of 5 to 10 millimeters) in primary total knee arthroplasty (TKA) has not yet been demonstrated. Therefore, we performed a retrospective study to evaluate the differences between these 2 treatments. METHODS: We retrospectively analyzed patients who underwent primary TKA for Rand IIb tibial plateau defects from 2015 to 2020 from a department database. Patients were categorized into the screw-cement and thick liner groups based on the different options used to repair tibial defects. We evaluated Knee Society Score, range of motion (ROM), Insall-Salvati index (ISI), and Forgotten Joint Score (FJS) in both groups. We also compared differences in prosthesis survival, stiffness, myasthenia, and joint clicking between the 2 groups at mean 2 years postoperatively (range, 2 to 2.3). A power analysis was performed on the number of cases in the cohort. RESULTS: Postoperative femur-tibia mechanical axis (FTMA) correction was significantly higher in the screw-cement group than in the thick-liner group: 18.8 (±5.6°) versus 15.4 (±5.9°) (P < .01); At mean 2 years after surgery, the American Knee Society Functional Score improvement values were higher in the thick-liner group than in the screw-cement group: 36.3 (±12.4) versus 42.4 (±16.4) (P = .05). Postoperative ISI scores were 0.95 (±0.12) points in the screw-cement group and 0.89 (±0.13) points in the-thick liner group (P = .03). There were no statistically significant differences in the Knee Society Clinical Score, ROM, FJS, stiffness, myasthenia, joint clicking, and revision rate. CONCLUSION: The results of this study showed no significant difference in clinical outcomes between the 2 reconstruction strategies of the screw cement fill technique and the adequate osteotomy and thick liner technique for Rand IIb tibial plateau defects. However, in patients who have FTMA deformities greater than 20° or in younger patients who need to preserve bone volume, we recommend the screw cement filling technique to ensure stable postoperative results and to prepare these patients for possible later surgery.

Application of Virtual and Augmented Reality Technology in Hip Surgery: Systematic Review.

BACKGROUND: Virtual and augmented reality (VAR) represents a combination of current state-of-the-art computer and imaging technologies and has the potential to be a revolutionary technology in many surgical fields. An increasing number of investigators have developed and applied VAR in hip-related surgery with the aim of using this technology to reduce hip surgery-related complications, improve surgical success rates, and reduce surgical risks. These technologies are beginning to be widely used in hip-related preoperative operation simulation and training, intraoperative navigation tools in the operating room, and postoperative rehabilitation. OBJECTIVE: With the aim of reviewing the current status of virtual reality (VR) and augmented reality (AR) in hip-related surgery and summarizing its benefits, we discussed and briefly described the applicability, advantages, limitations, and future perspectives of VR and AR techniques in hip-related surgery, such as preoperative operation simulation and training; explored the possible future applications of AR in the operating room; and discussed the bright prospects of VR and AR technologies in postoperative rehabilitation after hip surgery. METHODS: We searched the PubMed and Web of Science databases using the following key search terms: ("virtual reality" OR "augmented reality") AND ("pelvis" OR "hip"). The literature on basic and clinical research related to the aforementioned key search terms, that is, studies evaluating the key factors, challenges, or problems of using of VAR technology in hip-related surgery, was collected. RESULTS: A total of 40 studies and reports were included and classified into the following categories: total hip arthroplasty, hip resurfacing, femoral neck fracture, pelvic fracture, acetabular fracture, tumor, arthroscopy, and postoperative rehabilitation. Quality assessment could be performed in 30 studies. Among the clinical studies, there were 16 case series with an average score of 89 out of 100 points (89%) and 1 case report that scored 81 (SD 10.11) out of 100 points (81%) according to the Joanna Briggs Institute Critical Appraisal Checklist. Two cadaveric studies scored 85 of 100 points (85%) and 92 of 100 points (92%) according to the Quality Appraisal for Cadaveric Studies scale. CONCLUSIONS: VR and AR technologies hold great promise for hip-related surgeries, especially for preoperative operation simulation and training, feasibility applications in the operating room, and postoperative rehabilitation, and have the potential to assist orthopedic surgeons in operating more accurately and safely. More comparative studies are necessary, including studies focusing on clinical outcomes and cost-effectiveness.

Modified Brostrom-Gould surgical procedure for chronic lateral ankle instability compared with other operations: a systematic review and meta-analysis.

BACKGROUND: This study performed a randomized trial data meta-analysis to assess The Modified Brostrom-Gould (MBG) for proven chronic lateral ankle instability (CLAI). METHODS: All published randomized clinical trials comparing MBG and other operations were found by searching the Cochrane Library, EMBASE, and PubMed databases. The Review Manager 5.4 software was used to compare the two groups regarding postoperative functional score, ankle stability, and complications. Risk Ratio (RR) and Mean Differences (MD) were used in meta-analyses. RESULTS: 8 experiments are suitable for it, 426 patients were enrolled, and 222 patients underwent other operations surgery. Among the six outcome indicators, in terms of FAOS scores, the other operations group has an advantage, 6.53 points higher than MBG; others show no significant differences. CONCLUSIONS: Based on this meta-analysis, the authors believe that other surgical groups can achieve better outcomes than MBG in some aspects of CLAI treatment.

A tartrate-EDTA-Fe complex mediates electron transfer and enhances ammonia recovery in a bioelectrochemical-stripping system.

Traditional bioelectrochemical systems (BESs) coupled with stripping units for ammonia recovery suffer from an insufficient supply of electron acceptors due to the low solubility of oxygen. In this study, we proposed a novel strategy to efficiently transport the oxidizing equivalent provided at the stripping unit to the cathode by introducing a highly soluble electron mediator (EM) into the catholyte. To validate this strategy, we developed a new kind of iron complex system (tartrate-EDTA-Fe) as the EM. EDTA-Fe contributed to the redox property with a midpoint potential of -0.075 V (vs. standard hydrogen electrode, SHE) at pH 10, whereas tartrate acted as a stabilizer to avoid iron precipitation under alkaline conditions. At a ratio of the catholyte recirculation rate to the anolyte flow rate (RC-A) of 12, the NH4 +-N recovery rate in the system with 50 mM tartrate-EDTA-Fe complex reached 6.9 ±â€¯0.2 g N m-2 d-1, approximately 3.8 times higher than that in the non-EM control. With the help of the complex, our system showed an NH4 +-N recovery performance comparable to that previously reported but with an extremely low RC-A (0.5 vs. 288). The strategy proposed here may guide the future of ammonia recovery BES scale-up because the introduction of an EM allows aeration to be performed only at the stripping unit instead of at every cathode, which is beneficial for the system design due to its simplicity and reliability.

Synergetic Effects of Zn Alloying and Defect Engineering on Improving the CdS Buffer Layer of Cu2ZnSnS4 Solar Cells.

The inferior electrical properties at the interface of the Cu2ZnSnS4/CdS (CZTS/CdS) heterojunction resulting in the severe loss of open-circuit voltage (Voc) highly restrict the photovoltaic efficiency of CZTS solar cell devices. Here, first-principles calculations show that the Zn-alloyed CdS buffer layer reverses the unfavorable cliff-like conduction band offset (CBO) of CZTS/CdS to the desirable spike-like CBO of CZTS/Zn0.25Cd0.75S, which suppresses carrier nonradiative recombination and blocks electron backflow. In addition, the weakened n-type conductivity of Zn0.25Cd0.75S can be enhanced by In, Ga, and Cl doping without the introduction of detrimental deep-level defects and severe band-tail states, which improves the Voc of CZTS solar cells by promoting strong band bending and large quasi-Fermi-level splitting at the absorber side of the CZTS/Zn0.25Cd0.75S heterojunction. This study finds that the synergetic effects of Zn alloying and defect engineering on the CdS buffer layer are promising for overcoming the long-standing issue of the Voc deficit in CZTS solar cells, and understanding the optimized interfacial electrical properties provides theoretical guidance for improving the efficiency of semiconductor devices.

Formation of stable polonium monolayers with tunable semiconducting properties driven by strong quantum size effects.

Elemental two-dimensional (2D) materials have attracted extraordinary interest compared with other 2D materials over the past few years. Fifteen elements from group IIIA to VIA have been discussed experimentally or theoretically for the formation of 2D monolayers, and the remaining few elements still need to be identified. Here, using first-principles calculations within density functional theory (DFT) and ab initio molecular dynamics simulations (AIMDs), we demonstrated that polonium can form stable 2D monolayers (MLs) with a 1T-MoS2-like structure. The band structure calculations revealed that polonium monolayers possess strong semiconducting properties with a band gap of ∼0.9 eV, and such semiconducting properties can well sustain up to a thickness of 4 MLs with a bandgap of ∼0.1 eV. We also found that polonium monolayers can be achieved through a spontaneous phase transition of ultrathin films with magic thicknesses, resulting in a weaker van der Waals interaction of ∼32 meV Å-2 between each three atomic layers. Also, the underlying physics comes from layered Peierls-like distortion driven by strong quantum size effects. Based on these intriguing findings, a suitable substrate on which the polonium monolayer can be grown through an epitaxial growth technique is proposed for further experiments. Our work not only extends completely the puzzle of elemental 2D monolayer materials from group IIIA to VIA, but also presents a new formation mechanism of 2D materials beyond the database of bulk materials with layered van der Waals interactions.

High Thermoelectric Performance Achieved in Sb-Doped GeTe by Manipulating Carrier Concentration and Nanoscale Twin Grains.

Lead-free and eco-friendly GeTe shows promising mid-temperature thermoelectric applications. However, a low Seebeck coefficient due to its intrinsically high hole concentration induced by Ge vacancies, and a relatively high thermal conductivity result in inferior thermoelectric performance in pristine GeTe. Extrinsic dopants such as Sb, Bi, and Y could play a crucial role in regulating the hole concentration of GeTe because of their different valence states as cations and high solubility in GeTe. Here we investigate the thermoelectric performance of GeTe upon Sb doping, and demonstrate a high maximum zT value up to 1.88 in Ge0.90Sb0.10Te as a result of the significant suppression in thermal conductivity while maintaining a high power factor. The maintained high power factor is due to the markable enhancement in the Seebeck coefficient, which could be attributed to the significant suppression of hole concentration and the valence band convergence upon Sb doping, while the low thermal conductivity stems from the suppression of electronic thermal conductivity due to the increase in electrical resistivity and the lowering of lattice thermal conductivity through strengthening the phonon scattering by lattice distortion, dislocations, and twin boundaries. The excellent thermoelectric performance of Ge0.90Sb0.10Te shows good reproducibility and thermal stability. This work confirms that Ge0.90Sb0.10Te is a superior thermoelectric material for practical application.

Surface Van Hove Singularity Enabled Efficient Catalysis in Low-Dimensional Systems: CO Oxidation and Hydrogen Evolution Reactions.

Surface Van Hove singularity (SVHS) triggers exciting physical phenomena distinct from the bulk. Herein, we explore the potential role of SVHS in catalysis for both CO oxidation and the hydrogen evolution reaction (HER) using the graphene/Ca2N (Gra/Ca2N) heterojunction and Pt2HgSe3 (001) surface as prototype systems. It is demonstrated that both systems with SVHS could serve as an electron bath to promote O2 adsorption and subsequent CO oxidation with low energy barriers of 0.2-0.6 eV for the Gra/Ca2N and Pt2HgSe3 (001) surface and similarly facilitate the HER with near-zero hydrogen adsorption free energy. Importantly, the catalytically active sites associated with SVHS are well-defined and distributed over the whole surface plane, and further, the chemical reactivity of SVHS can also be tuned easily via adjusting its position with respect to EF. Our study demonstrates the enabling power of SVHS and provides novel physical insights into the promising potential role of VHS in designing high-efficiency catalysts.

Simultaneous Realization of Flexibility and Ultrahigh Normalized Power Density in a Heatsink-Free Thermoelectric Generator via Fine Thermal Regulation.

Wearable thermoelectric generators (w-TEGs) can incessantly convert body heat into electricity to power electronics. However, the low efficiency of thermoelectric materials, tiny terminal temperature difference, rigidity, and negligence of lateral heat transfer preclude broad utilization of w-TEGs. In this work, we employ finite element simulation to find the key factors for simultaneous realization of flexibility and ultrahigh normalized power density. Using melamine foam with an ultralow thermal conductivity (0.03 W/m K) as the encapsulation material, a novel lightweight π-type w-TEG with no heatsink and excellent stretchability, comfortability, processability, and cost efficiency has been fabricated. At an ambient temperature of 24 °C, the maximum power density of the w-TEG reached 7 µW/cm2 (sitting) and 29 µW/cm2 (walking). Under suitable heat exchange conditions (heatsink with 1 m/s air velocity), 32 pairs of w-TEGs can generate 66 mV voltage and 60 µW/cm2 power density. The output performance of our TEG is remarkably superior to that of previously reported w-TEGs. Besides, the practicality of our w-TEG was showcased by successfully driving a quartz watch at room temperature.