First-line treatment of severe aplastic anemia: immunosuppressive therapy plus eltrombopag versus haploidentical hematopoietic stem cell transplantation, a multicenter prospective study.

Matched-related donor hematopoietic stem cell transplantation (HSCT) remains the preferred first-line option for severe aplastic anemia (SAA) patients aged <40 years even in the era of eltrombopag (EPAG). However, there has not been any direct comparison between immunosuppressive therapy (IST) plus EPAG (IST + EPAG) and haploidentical HSCT (Haplo-HSCT) as first-line therapy. This study prospectively compared the efficacy, safety and health-related quality of life (HRQoL) of Haplo-HSCT (n = 147) and IST + EPAG (n = 121) as first-line treatment for patients with SAA. The results showed that 86.3% of patients in the Haplo-HSCT group and 24.1% of patients in the IST + EPAG group achieved normal complete blood count (CBC) (P < 0.001) after 6 months of treatment. The time to achieve transfusion independence and absolute neutrophil count ≥ 1.0 × 109/L were shorter in the Haplo-HSCT group than in the IST + EPAG group (P < 0.05). In the IST + EPAG and Haplo-HSCT, 3-year overall survival (OS) was 92.4 ± 2.4% and 82.8 ± 3.1% (P = 0.017), whereas 3-year failure-free survival (FFS) was 69.4 ± 4.2% and 81.6 ± 3.2% (P = 0.002), respectively. Similar results were observed in patients with <40 years of age. Among patients with ≥40 years of age, there was no difference in 3-year OS (88.6 ± 4.8% vs. 82.4 ± 8.1%, P = 0.517) between the IST + EPAG and Haplo-HSCT groups, whereas 3-year FFS was lower in the IST + EPAG (58.7 ± 7.5% vs. 82.4 ± 8.1%, P = 0.043). Subgroup analysis for populations aged <40 years indicated that SAA benefited more from IST + EPAG, and very SAA (vSAA) benefited more from Haplo-HSCT. Patients treated with haplo-HSCT scored significantly better in the HRQoL than treated with IST + EPAG (P < 0.0001). Multivariate analysis showed that first-line Haplo-HSCT was associated with normal CBC at 6 months, better FFS and led to a better HRQoL (P < 0.001). In summary, the IST + EPAG achieved better OS for <40 years SAA patients, while the Haplo-HSCT accelerated hematopoietic recovery and HRQoL, achieved better FFS even for those <40 years vSAA and ≥40 years patients.

A case report of right-sided heart failure secondary to JAK2-mutation Loeffler endocarditis.

Loeffler's endocarditis (LE) is the cardiac manifestation of hypereosinophilic syndrome. We present a case of LE in a 45-year-old female, resulting in diffuse endothelial fibrosis and severe right-sided heart failure. The patient was admitted with dyspnoea and oedema, with haematology revealing an absolute eosinophil count of 20.9 × 109. Imaging showed near-complete obliteration of the right ventricular apical and formation of thromboses. Endomyocardial biopsy indicated diffuse fibrous hyperplasia of the endocardium with fibrinous thrombi rich in eosinophils. Molecular and cytogenetic analyses of bone marrow cells showed no signs of FIP1L1-PDGFRA fusion, PDGFRB mutation, abnormal myeloid maturation, or a lymphoproliferative disorder. Flow cytometry indicated no clonality, ruling out chronic eosinophilic leukaemia. Gene mutation screening discovered a p.L583_A586delinesS mutation in the JAK2 gene. Following treatment with ruxolitinib, the patient's eosinophil levels normalized, but unfortunately, the damage to the heart was irreversible. The patient was hospitalized multiple times due to right heart failure and resistance to diuretics. After thorough discussions with the medical team, it was determined that a heart transplantation would be the most effective treatment. Following the surgery, the patient successfully navigated the postoperative critical period with the support of an intra-aortic balloon pump (IABP), continuous renal replacement therapy (CRRT), and ventilator-assisted ventilation but subsequently developed an acquired Intensive care unit-acquired weakness (ICU-AW) and a depressive state. Fortunately, the patient gradually recovered from these complications.

Comparison of efficacy of eltrombopag combined with immunosuppression in the treatment of severe aplastic anemia and very severe aplastic anemia: real-world data and evidence.

Eltrombopag combined with immunosuppressive therapy (IST) was superior to IST alone for severe aplastic anemia (SAA) in the previous studies. But in China, horse antithymocyte globulin (hATG) is not available, instead, we use rabbit ATG (rATG). Here, we compared the efficacy and safety of IST (rATG combined with cyclosporine) combined with or without eltrombopag for the first-line treatment of SAA and very severe aplastic anemia (VSAA). A total of 371 patients in ten institutions in China from April 1, 2017 to December 1, 2022 were enrolled. The overall response (OR) rate at 3 months (54.2% vs. 41%; P = 0.046), the complete response (CR) (31.3% vs. 19.4%; P = 0.041) and OR (78.3% vs. 51.1%; P < 0.0001) rates at 6 months were significantly higher with IST combined with eltrombopag than with IST alone in SAA patients. While in VSAA patients, the addition of eltrombopag to IST only increased the CR rate at 6 months (29.8% vs. 9.43%; P = 0.010). Liver injury increased significantly in groups treated with IST combined with eltrombopag (P < 0.05). Serious treatment-related toxicities were similar (P > 0.05). In patients with SAA, 3-year failure-free survival (FFS) of eltrombopag combined with IST group was significantly higher than that of IST group (70.7 ± 5.3% vs. 50.3 ± 3.9%; P = 0.007). In patients with VSAA, the addition of eltrombopag significantly improved 3-year overall survival (OS) (82.2 ± 5.7% vs. 57.3 ± 7.2%; P = 0.020). Our findings suggested that IST combined with eltrombopag could improve the hematological recovery of newly diagnosed SAA without increasing severe toxicities. But in VSAA, the addition of eltrombopag seemed to show no other improvement to efficacy except the CR rate at 6 months.

Machine learning for the prediction of 1-year mortality in patients with sepsis-associated acute kidney injury.

INTRODUCTION: Sepsis-associated acute kidney injury (SA-AKI) is strongly associated with poor prognosis. We aimed to build a machine learning (ML)-based clinical model to predict 1-year mortality in patients with SA-AKI. METHODS: Six ML algorithms were included to perform model fitting. Feature selection was based on the feature importance evaluated by the SHapley Additive exPlanations (SHAP) values. Area under the receiver operating characteristic curve (AUROC) was used to evaluate the discriminatory ability of the prediction model. Calibration curve and Brier score were employed to assess the calibrated ability. Our ML-based prediction models were validated both internally and externally. RESULTS: A total of 12,750 patients with SA-AKI and 55 features were included to build the prediction models. We identified the top 10 predictors including age, ICU stay and GCS score based on the feature importance. Among the six ML algorithms, the CatBoost showed the best prediction performance with an AUROC of 0.813 and Brier score of 0.119. In the external validation set, the predictive value remained favorable (AUROC = 0.784). CONCLUSION: In this study, we developed and validated a ML-based prediction model based on 10 commonly used clinical features which could accurately and early identify the individuals at high-risk of long-term mortality in patients with SA-AKI.

Highthroughput Screening of CuBi Bimetallic Catalyst Array for Electrocatalytic CO2 Reduction Reaction by Scanning Electrochemical Microscope.

The testing and evaluation of catalysts in CO2 electroreduction is a very tedious process. To study the catalytic system of CO2 reduction more quickly and efficiently, it is necessary to establish a method that can detect multiple catalysts at the same time. Herein, a series of CuBi bimetallic catalysts have been successfully prepared on a single glass carbon electrode by a scanning micropieptte contact method. The application of scanning electrochemical microscopy (SECM) enabled the visualization of the CO2 reduction activity in diverse catalyst micro-points. The SECM imaging with Substrate generation/tip collection (SG/TC) mode was conducted on CuBi bimetallic micro-points, revealing that HER reaction emerged as the prevailing reaction when a low overpotential was employed. While the applied potential was lower than -1.5 V (vs Ag/AgCl), the reduction of CO2 to formic acid became dominant. Increasing the bismuth proportion in the bimetallic catalyst can inhibit the hydrogen evolution reaction at low potential and enhances the selectivity of the CO product at high cathode overpotential.This research offers a novel approach to examining arrays of catalysts for CO2 reduction.

Platinum Cluster Decoration on Hollow Carbon Spheres for High-Efficiency Hydrogen Evolution Reaction.

Currently, platinum (Pt)/carbon support composite materials have tremendous application prospects in the hydrogen evolution reaction (HER). However, one of the primary challenges for boosting their performance is designing a substrate with the desired microstructure. Herein, the intact hollow carbon spheres (HCSs) were prepared via template method. Based on the morphology variation of the as-prepared HCSs-x, we conjectured that the polydopamine (PDA) core was generated first and then slowly grew into a complete overburden (SiO2@PDA). Afterward, Pt atomic clusters were anchored on the outer shells of HCSs-4 to construct composite electrocatalysts (Pty/HCSs-4) by a chemical reduction method. Due to the low charge-transfer resistance, the HCSs have a large electrochemical surface area and provide a continuous electron transport pathway, boosting the atom utilization efficiency during hydrogen production and release. The synthesized Pt2.5/HCSs-4 electrocatalysts exhibit excellent HER activity in acidic media, which can be ascribed to the compositional modulation and delicate structural design. Specifically, when the overpotential is 10 A g-1, the overpotential can achieve 92 mV. This work opens a new route to fabricate Pt-based electrocatalysts and brings a new understanding of the formation mechanism of HCSs.

A Novel Deformity Correction Manipulation System for Better Correction of Large Thoracic Scoliosis.

OBJECTIVE: Treating patients with large thoracic scoliosis (between 70° and 100°) poses technical challenges, particularly with traditional correction techniques (TCT). To address this, we developed a novel deformity correction manipulation system (DCMS) aimed at reducing surgical complexity and trauma. This study aims to assess the safety and effectiveness of DCMS in treating large thoracic scoliosis. METHODS: From January 2016 to June 2021, 76 patients with large thoracic scoliosis were included in this retrospective study. The patients were divided into two groups: DCMS (n = 34) and TCT (n = 42). Basic patient data including age at surgery, sex, etiology, Risser sign, flexibility of the main thoracic curve, instrumented levels, number of screws, duration of hospital stay, and follow-up time were collected and analyzed. Radiographic and clinical outcomes, as measured by various radiographic parameters and Scoliosis Research Society-30 (SRS-30) scores, were retrospectively analyzed and compared between the two groups. Adverse events were also documented. Statistical analyses were performed using two-tailed independent t-tests, chi-square tests, and Fisher's exact test. RESULTS: The DCMS group exhibited significantly shorter operative times, reduced blood loss, and shorter hospital stays compared to the TCT group. However, there were no significant differences between the two groups in terms of age at surgery, sex, etiology, Risser sign, flexibility of the main curve, instrumented levels, number of screws, and follow-up time. While preoperative major curves were statistically similar between the two groups, the DCMS group achieved a superior correction rate compared to the TCT group (74.2% ± 8.8% vs 68.1% ± 10.5%). No significant differences were observed in other radiographic parameters, SRS-30 scores, or the incidence of adverse events. CONCLUSION: The application of DCMS resulted in shorter operative times, reduced blood loss, shorter hospital stays, and greater curve correction compared to TCT. DCMS proves to be a safe and effective technique for treating large thoracic curves.

NiS ultrafine nanorod with translational and rotational symmetry.

Anisotropy is a significant and prevalent characteristic of materials, conferring orientation-dependent properties, meaning that the creation of original symmetry enables key functionality that is not found in nature. Even with the advancements in atomic machining, synthesis of separated symmetry in different directions within a single structure remains an extraordinary challenge. Here, we successfully fabricate NiS ultrafine nanorods with separated symmetry along two directions. The atomic structure of the nanorod exhibits rotational symmetry in the radial direction, while its axial direction is characterized by divergent translational symmetry, surpassing the conventional crystalline structures known to date. It does not fit the traditional description of the space group and the point group in three dimensions, so we define it as a new structure in which translational symmetry and rotational symmetry are separated. Further corroborating the atomic symmetric separation in the electronic structure, we observed the combination of stripe and vortex magnetic domains in a single nanorod with different directions, in accordance with the atomic structure. The manipulation of nanostructure at the atomic level introduces a novel approach to regulate new properties finely, leading to the proposal of new nanotechnology mechanisms.

Mitochondria-engine with self-regulation to restore degenerated intervertebral disc cells via bioenergetic robust hydrogel design.

Previous studies have confirmed that intervertebral disc degeneration (IDD) is closely associated with inflammation-induced reactive oxygen species (ROS) and resultant cell mitochondrial membrane potential (MMP) decline. Clearance of ROS in an inflammatory environment is essential for breaking the vicious cycle of MMP decline. Additionally, re-energizing the mitochondria damaged in the inflammatory milieu to restore their function, is equally important. Herein, we proposed an interesting concept of mitochondrion-engine equipped with coolant, which enables first to "cool-down" the inflammatory environment, next to restore the MMP, finally to allow cells to regain normal energy metabolism through materials design. As such, we developed a multi-functional composite composed of a reactive oxygen species (ROS)-responsive sodium alginate/gelatin hydrogel infused into a rigid 3D-printed thermoplastic polyurethane (TPU) scaffold. The TPU scaffold was coated with conductive polypyrrole (PPy) to electrophoretically deposit l-arginine, which could upregulate the Mammalian target of rapamycin (mTOR) pathway, thus increasing MMP and energy metabolism to stimulate extracellular matrix synthesis for IVD repair. While the ROS-responsive hydrogel acting as the "mito-engine coolant" could scavenge the excessive ROS to create a favorable environment for IVD cells recovery. Demonstrated by in vitro and in vivo evaluations, the mito-engine system markedly promoted the proliferation and collagen synthesis of nucleus pulposus cells while enhancing the mitochondrial respiration and MMP under oxidative stress. Radiological and histological assessments in vivo revealed the efficacy of this system in IVD repair. This unique bioinspired design integrated biomaterial science with mitochondrial biology, presents a promising paradigm for IDD treatment.

High-Valence Cu Induced by Photoelectric Reconstruction for Dynamically Stable Oxygen Evolution Sites.

Oxygen vacancies are generally considered to play a crucial role in the oxygen evolution reaction (OER). However, the generation of active sites created by oxygen vacancies is inevitably restricted by their condensation and elimination reactions. To overcome this limitation, here, we demonstrate a novel photoelectric reconstruction strategy to incorporate atomically dispersed Cu into ultrathin (about 2-3 molecular) amorphous oxyhydroxide (a-CuM, M = Co, Ni, Fe, or Zn), facilitating deprotonation of the reconstructed oxyhydroxide to generate high-valence Cu. The in situ XAFS results and first-principles calculations reveal that Cu atoms are stabilized at high valence during the OER process due to Jahn-Teller distortion, resulting in para-type double oxygen vacancies as dynamically stable catalytic sites. The optimal a-CuCo catalyst exhibits a record-high mass activity of 3404.7 A g-1 at an overpotential of 300 mV, superior to the benchmarking hydroxide and oxide catalysts. The developed photoelectric reconstruction strategy opens up a new pathway to construct in situ stable oxygen vacancies by high-valence Cu single sites, which extends the design rules for creating dynamically stable active sites.

Elevating Discharge Voltage of Li2CO3-Routine Li-CO2 Battery over 2.9†V at an Ultra-Wide Temperature Window.

The Li-CO2 batteries utilizing greenhouse gas CO2 possess advantages of high energy density and environmental friendliness. However, these batteries following Li2CO3-product route typically exhibit low work voltage (<2.5 V) and energy efficiency. Herein, we have demonstrated for the first time that cobalt phthalocyanine (CoPc) as homogeneous catalyst can elevate the work plateau towards 2.98 V, which is higher than its theoretical discharge voltage without changing the Li2CO3-product route. This unprecedented discharge voltage is illustrated by mass spectrum and electrochemical analyses that CoPc has powerful adsorption capability with CO2 (-7.484 kJ mol-1) and forms discharge intermediate of C33H16CoN8O2. Besides high discharge capacity of 18724 mAh g-1 and robust cyclability over 1600 hours (1000 mAh g-1 cut-off) at a current density of 100 mA g-1, the batteries show high temperature adaptability (-30-80 °C). Our work is paving a promising avenue for the progress of high-efficiency Li-CO2 batteries.

HLA-mismatched allogeneic adoptive immune therapy in patients with severely immunosuppressed AIDS: a multicenter, open-label, controlled, phase 2a study.

Recurrent opportunistic infections (OIs) in patients with severely immunosuppressed AIDS remain an unresolved medical challenge despite advancements in antiretroviral therapy (ART). To address this gap, we developed an HLA-mismatched allogeneic adoptive immune therapy (AAIT) specifically targeting this patient population. The safety and efficacy of this novel therapeutic approach were preliminarily confirmed in our phase 1 trial. Subsequently, a multicenter, open-label, controlled, phase 2a trial was conducted to evaluate the efficacy of AAIT in combination with ART compared with the conventional ART-only regimen. No difference in the incidence of adverse events (AEs) was observed between the two groups at the 96-week follow-up. AAIT treatment improved CD4+ T cell recovery at weeks 72 (P = 0.048) and 96 (P = 0.024) compared to the Control Group. Additionally, stratified analysis of patients in the AAIT Group showed that donor/recipient sex mismatch was significantly associated with the likelihood of patients achieving an immunological response (OR = 8.667; 95% CI, 2.010-37.377; P = 0.004). These findings suggest that AAIT serves as a promising adjunct therapy for improving the outcomes of patients with severely immunosuppressed AIDS. Further studies are needed to elucidate the immunological mechanisms underlying AAIT and identify the subpopulations that respond optimally to this therapeutic approach. This trial is registered at www.clinicaltrials.gov (NCT04098770).Trial registration: ClinicalTrials.gov identifier: NCT04098770.Trial registration: ClinicalTrials.gov identifier: NCT02651376.

A gradient-distributed binder with high energy dissipation for stable silicon anode.

Silicon is considered as a promising alternative to traditional graphite anode for lithium-ion batteries. Due to the dramatic volume expansion of silicon anode generated from the insertion of Li+ ions, the binder which can suppress the severe volume change and repeated massive stress impact during cycling is required greatly. Herein, we design a gradient-distributed two-component binder (GE-PAA) to achieve excellent cyclic stability, and reveal the mechanism of high energy dissipative binder stabilized silicon electrodes. The inner layer of the electrode is the polyacrylic acid polymer (PAA) with high Young's modulus, which is used as the skeleton binder to stabilize the silicon particle interface and the electrode structure. The outer layer is the gel electrolyte polymer (GE) with lower Young's modulus, which releases the stress generated during the lithiation and de-lithiation process effectively, achieving the high structural stability at the molecular level and silicon particles. Due to the synergistic effect of the gradient binder design, the silicon electrode retains a reversible capacity of 1557.4 mAh g-1 after 200 cycles at the current density of 0.5 C and 1539.2 mAh g-1 at a high rate of 1.8 C. This work provides a novel binder design strategy for Si anode with long cycle stability.

Online rumors during the COVID-19 pandemic: co-evolution of themes and emotions.

Introduction: During public health emergencies, online rumors spread widely on social media, causing public information anxiety and emotional fluctuations. Analyzing the co-evolution patterns of online rumor themes and emotions is essential for implementing proactive and precise governance of online rumors during such events. Methods: Rumor texts from mainstream fact-checking platforms during the COVID-19 pandemic were collected and analyzed in phases based on the crisis lifecycle theory. The LDA topic model was applied to analyze the distribution of rumor themes at different stages. The Baidu AI Sentiment Analysis API was used to study the emotional tendencies of rumors at different stages. Line graphs were utilized to analyze the co-evolution characteristics of rumor themes and emotions. Results: During the COVID-19 pandemic, the themes of online rumors can be categorized into five types: epidemic prevention and control, panic-inducing, production and livelihood, virus dissemination, and social figures. These themes exhibited repetition and fluctuation at different stages of the pandemic. The emotions embedded in pandemic-related online rumors evolved with the progression of the pandemic. Panic-inducing rumors co-evolved with negative emotions, while epidemic prevention and control rumors co-evolved with positive emotions. Conclusion: The study results help to understand the public's focus and emotional tendencies at different stages of the COVID-19 pandemic, thereby enabling targeted public opinion guidance and crisis management.

Synergy of Photogenerated Electrons and Holes toward Efficient Photocatalytic Urea Synthesis from CO2 and N2.

Directly coupling N2 and CO2 to synthesize urea by photocatalysis paves a sustainable route for urea synthesis, but its performance is limited by the competition of photogenerated electrons between N2 and CO2, as well as the underutilized photogenerated holes. Herein, we report an efficient urea synthesis process involving photogenerated electrons and holes in respectively converting CO2 and N2 over a redox heterojunction consisting of WO3 and Ni single-atom-decorated CdS (Ni1-CdS/WO3). For the photocatalytic urea synthesis from N2 and CO2 in pure water, Ni1-CdS/WO3 attained a urea yield rate of 78 µM h-1 and an apparent quantum yield of 0.15 % at 385 nm, which ranked among the best photocatalytic urea synthesis performance reported. Mechanistic studies reveal that the N2 was converted into NO species by ⋅OH radicals generated from photogenerated holes over the WO3 component, meanwhile, the CO2 was transformed into *CO species over the Ni site by photogenerated electrons. The generated NO and *CO species were further coupled to form *OCNO intermediate, then gradually transformed into urea. This work emphasizes the importance of reasonably utilizing photogenerated holes in photocatalytic reduction reactions.

A comparison of anterior reconstruction of spinal defect using nano-hydroxyapatite/polyamide 66 cage and autologous iliac bone for thoracolumbar tuberculosis: a stepwise propensity score matching analysis.

Purpose: Previous studies have confirmed the advantages and disadvantages of autogenous iliac bone and nano-hydroxyapatite/polyamide 66 (n-HA/PA66) cage. However, there is no conclusive comparison between the efficacy of the two implant materials in spinal tuberculosis bone graft fusion. The aim of this study was to analyze the mid-to long-term clinical and radiologic outcomes between n-HA/PA66 cage and autogenous iliac bone for anterior reconstruction application of spinal defect for thoracolumbar tuberculosis. Methods: We retrospectively reviewed all patients who underwent anterior debridement and strut graft with n-HA/PA66 cage or iliac bone combined with anterior instrumentations between June 2009 and June 2014. One-to-one nearest-neighbor propensity score matching (PSM) was used to match patients who underwent n-HA/PA66 cage to those who underwent iliac bone. Clinical outcomes were assessed using the Japanese Orthopaedic Association (JOA) and visual analogue score (VAS). Radiographic evaluations included cage subsidence and segmental angle. Results: At the end of the PSM analysis, 16 patients from n-HA/PA66 cage group were matched to 16 patients in Iliac bone group. The C-reactive protein (CRP) and erythrocyte sedimentation rate (ESR) values in the n-HA/PA66 group decreased significantly from 33.19 ± 10.89 and 46.63 ± 15.65 preoperatively, to 6.56 ± 2.48 and 9.31 ± 3.34 at the final follow-up, respectively (p < 0.001). There were no significant differences in the CRP and ESR values between the two groups at the final follow-up. The VAS and JOA scores in the iliac bone and n-HA/PA66 group were significantly improved at the 3-month follow-up postoperatively (both p < 0.001). Then, improvements of VAS and JOA scores continue long at final follow-up. However, there were no significant differences in the VAS and JOA scores at any time point between the two groups (p > 0.05). Although the segmental angle (SA) significantly increased after surgery in both groups, there was no significant difference at any time point after surgery (p > 0.05). There were no significant differences in the cage subsidence and fusion time between the two groups. Conclusion: Overall, our data suggest that the n-HA/PA66 cage outcomes are comparable to those in the autogenous iliac bone, with a similar high fusion rate as autogenous iliac bone.

Machine learning for predicting liver and/or lung metastasis in colorectal cancer: A retrospective study based on the SEER database.

OBJECTIVE: This study aims to establish a machine learning (ML) model for predicting the risk of liver and/or lung metastasis in colorectal cancer (CRC). METHODS: Using the National Institutes of Health (NIH)'s Surveillance, Epidemiology, and End Results (SEER) database, a total of 51265 patients with pathological diagnosis of colorectal cancer from 2010 to 2015 were extracted for model development. On this basis, We have established 7 machine learning algorithm models. Evaluate the model based on accuracy, and AUC of receiver operating characteristics (ROC) and explain the relationship between clinical pathological features and target variables based on the best model. We validated the model among 196 colorectal cancer patients in Beijing Electric Power Hospital of Capital Medical University of China to evaluate its performance and universality. Finally, we have developed a network-based calculator using the best model to predict the risk of liver and/or lung metastasis in colorectal cancer patients. RESULTS: 51265 patients were enrolled in the study, of which 7864 (15.3 %) had distant liver and/or lung metastasis. RF had the best predictive ability, In the internal test set, with an accuracy of 0.895, AUC of 0.956, and AUPR of 0.896. In addition, the RF model was evaluated in the external validation set with an accuracy of 0.913, AUC of 0.912, and AUPR of 0.611. CONCLUSION: In this study, we constructed an RF algorithm mode to predict the risk of colorectal liver and/or lung metastasis, to assist doctors in making clinical decisions.

Surgical Treatment Outcomes of Anterior-Only Correction and Reconstruction for Severe Cervical Kyphotic Deformity with Neurofibromatosis-1: A Retrospective Study with a 5-Year Follow-Up.

OBJECTIVES: Currently, anterior-only (AO), posterior-only, and combined anterior-posterior spinal fusions are common strategies for treating cervical kyphosis in patients with neurofibromatosis-1 NF-1. Nevertheless, the choice of surgical strategy remains a topic of controversy. The aim of our study is to evaluate the safety and effectiveness of anterior decompression and spinal reconstruction for the treatment of cervical kyphosis in patients with NF-1. METHODS: Twelve patients with NF-1-associated cervical kyphotic deformity were reviewed retrospectively between January 2010 and April 2020. All patients underwent AO correction and reconstruction. The X-ray was followed up in all these patients to assess the preoperative and postoperative local kyphosis angle (LKA), the global kyphosis angle (GKA), the sagittal vertical axis, and the T1 slope. The visual analog scale score, Japanese Orthopedic Association (JOA) score, and neck disability index (NDI) score were used to evaluate the improvement inclinical symptoms. The results of the difference in improvement from preoperatively to the final follow-up assessment were assessed using a paired t-test or Mann-Whitney U-test. RESULTS: The LKA and GKA decreased from the preoperative average of 64.42 (range, 38-86) and 35.50 (range, 10-81) to an average of 16.83 (range, -2 to 46) and 4.25 (range, -22 to 39) postoperatively, respectively. The average correction rates of the LKA and GKA were 76.11% and 111.97%, respectively. All patients had achieved satisfactory relief of neurological symptoms (p < 0.01). JOA scores were improved from 10.42 (range, 8-16) preoperatively to 15.25 (range, 11-18) at final follow-up (p < 0.01). NDI scores were decreased from an average of 23.25 (range, 16-34) preoperatively to an average of 7.08 (range, 3-15) at the final follow-up (p < 0.01). CONCLUSION: Anterior-only correction and reconstruction is a safe and effective method for correcting cervical kyphosis in NF-1 patients. In fixed cervical kyphosis cases, preoperative skull traction should also be considered.

Amorphous Bismuth-Tin Oxide Nanosheets with Optimized C-N Coupling for Efficient Urea Synthesis.

Closing the carbon and nitrogen cycles by electrochemical methods using renewable energy to convert abundant or harmful feedstocks into high-value C- or N-containing chemicals has the potential to transform the global energy landscape. However, efficient conversion avenues have to date been mostly realized for the independent reduction of CO2 or NO3-. The synthesis of more complex C-N compounds still suffers from low conversion efficiency due to the inability to find effective catalysts. To this end, here we present amorphous bismuth-tin oxide nanosheets, which effectively reduce the energy barrier of the catalytic reaction, facilitating efficient and highly selective urea production. With enhanced CO2 adsorption and activation on the catalyst, a C-N coupling pathway based on *CO2 rather than traditional *CO is realized. The optimized orbital symmetry of the C- (*CO2) and N-containing (*NO2) intermediates promotes a significant increase in the Faraday efficiency of urea production to an outstanding value of 78.36% at -0.4 V vs RHE. In parallel, the nitrogen and carbon selectivity for urea formation is also enhanced to 90.41% and 95.39%, respectively. The present results and insights provide a valuable reference for the further development of new catalysts for efficient synthesis of high-value C-N compounds from CO2.

Activating Angiogenesis and Immunoregulation to Propel Bone Regeneration via Deferoxamine-Laden Mg-Mediated Tantalum Oxide Nanoplatform.

Vascularization and inflammation management are essential for successful bone regeneration during the healing process of large bone defects assisted by artificial implants/fillers. Therefore, this study is devoted to the optimization of the osteogenic microenvironment for accelerated bone healing through rapid neovascularization and appropriate inflammation inhibition that were achieved by applying a tantalum oxide (TaO)-based nanoplatform carrying functional substances at the bone defect. Specifically, TaO mesoporous nanospheres were first constructed and then modified by functionalized metal ions (Mg2+) with the following deferoxamine (DFO) loading to obtain the final product simplified as DFO-Mg-TaO. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) revealed that the product was homogeneously dispersed hollow nanospheres with large specific surface areas and mesoporous shells suitable for loading Mg2+ and DFO. The biological assessments indicated that DFO-Mg-TaO could enhance the adhesion, proliferation, and osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs). The DFO released from DFO-Mg-TaO promoted angiogenetic activity by upregulating the expressions of hypoxia-inducible factor-1 (HIF-1α) and vascular endothelial growth factor (VEGF). Notably, DFO-Mg-TaO also displayed anti-inflammatory activity by reducing the expressions of pro-inflammatory factors, benefiting from the release of bioactive Mg2+. In vivo experiments demonstrated that DFO-Mg-TaO integrated with vascular regenerative, anti-inflammatory, and osteogenic activities significantly accelerated the reconstruction of bone defects. Our findings suggest that the optimized DFO-Mg-TaO nanospheres are promising as multifunctional fillers to speed up the bone healing process.