Single-crystalline hole-transporting layers for efficient and stable organic light-emitting devices.

Efficient charge-carrier injection and transport in organic light-emitting devices (OLEDs) are essential to simultaneously achieving their high efficiency and long-term stability. However, the charge-transporting layers (CTLs) deposited by various vapor or solution processes are usually in amorphous forms, and their low charge-carrier mobilities, defect-induced high trap densities and inhomogeneous thickness with rough surface morphologies have been obstacles towards high-performance devices. Here, organic single-crystalline (SC) films were employed as the hole-transporting layers (HTLs) instead of the conventional amorphous films to fabricate highly efficient and stable OLEDs. The high-mobility and ultrasmooth morphology of the SC-HTLs facilitate superior interfacial characteristics of both HTL/electrode and HTL/emissive layer interfaces, resulting in a high Haacke's figure of merit (FoM) of the ultrathin top electrode and low series-resistance joule-heat loss ratio of the SC-OLEDs. Moreover, the thick and compact SC-HTL can function as a barrier layer against moisture and oxygen permeation. As a result, the SC-OLEDs show much improved efficiency and stability compared to the OLEDs based on amorphous or polycrystalline HTLs, suggesting a new strategy to developing advanced OLEDs with high efficiency and high stability.

Improved Performance and Stability of Quasi-Two-Dimensional Perovskite Solar Cells by Post-treatment with Acetaminophen.

Recently, perovskite solar cells (PSCs) based on quasi-two-dimensional (quasi-2D) perovskites have drawn more attention due to their excellent stability, although their efficiencies are still lower than those of 3D ones. Here we applied post-treatment of 2D perovskite GAMA5Pb5I16 (GA = guanidinium, MA = methylammonium) films with acetaminophen (AMP) to improve their performance. The efficiency of the solar cells with 2 mg/mL AMP post-treatment increased to 18.01% from 16.72% for those without post-treatment. The efficiency improvement results from the enlarged grain size, reduced trap state density, and better energy level matching after AMP post-treatment. In addition, the stability of the solar cells is improved. The solar cells with AMP post-treatment maintain 91% of the original power conversion efficiency value after aging for 30 days in the atmosphere. This work opens a new approach for the efficiency and stability enhancement of quasi-2D PSCs.

Magnetic resonance imaging radiomics-based prediction of clinically significant prostate cancer in equivocal PI-RADS 3 lesions in the transitional zone.

Purpose: This bi-institutional study aimed to establish a robust model for predicting clinically significant prostate cancer (csPCa) (pathological grade group ≥ 2) in PI-RADS 3 lesions in the transition zone by comparing the performance of combination models. Materials and methods: This study included 243 consecutive men who underwent 3-Tesla magnetic resonance imaging (MRI) and ultrasound-guided transrectal biopsy from January 2020 and April 2022 which is divided into a training cohort of 170 patients and a separate testing cohort of 73 patients. T2WI and DWI images were manually segmented for PI-RADS 3 lesions for the mean ADC and radiomic analysis. Predictive clinical factors were identified using both univariate and multivariate logistic models. The least absolute shrinkage and selection operator (LASSO) regression models were deployed for feature selection and for constructing radiomic signatures. We developed nine models utilizing clinical factors, radiological features, and radiomics, leveraging logistic and XGboost methods. The performances of these models was subsequently compared using Receiver Operating Characteristic (ROC) analysis and the Delong test. Results: Out of the 243 participants with a median age of 70 years, 30 were diagnosed with csPCa, leaving 213 without a csPCa diagnosis. Prostate-specific antigen density (PSAD) stood out as the only significant clinical factor (odds ratio [OR], 1.068; 95% confidence interval [CI], 1.029-1.115), discovered through the univariate and multivariate logistic models. Seven radiomic features correlated with csPCa prediction. Notably, the XGboost model outperformed eight other models (AUC of the training cohort: 0.949, and validation cohort: 0.913). However, it did not surpass the PSAD+MADC model (P > 0.05) in the training and testing cohorts (AUC, 0.949 vs. 0.888 and 0.913 vs. 0.854, respectively). Conclusion: The machine learning XGboost model presented the best performance in predicting csPCa in PI-RADS 3 lesions within the transitional zone. However, the addition of radiomic classifiers did not display any significant enhancement over the compound model of clinical and radiological findings. The most exemplary and generalized option for quantitative prostate evaluation was Mean ADC+PSAD.

Association between optic atrophy 1 polymorphisms and primary open angle glaucoma risk: Based on a meta-analysis.

BACKGROUND: Emerging evidence suggested a significant association between optic atrophy 1 (OPA1) polymorphisms and primary open angle glaucoma (POAG) risk. However, the current data are inconsistent or even contradictory. Given these, we conducted a meta-analysis to examine the precise association between OPA1 polymorphisms and POAG risk. MATERIALS AND METHODS: Online databases were retrieved, and the related studies were reviewed from inception to December 1, 2022. Odds ratios (ORs) and corresponding 95% confidence intervals (CIs) were calculated to examine the statistical power of each genetic model. In addition, heterogeneity, sensitivity, cumulative analysis, and publication bias were analyzed to guarantee statistical power. RESULT: Overall, 14 studies within 11 publications (involving 2,413 POAG patients and 1,904 controls) were included and some significant association between OPA1 rs166850 C/T (T vs. C: OR = 1.24, 95%CI = 1.06-1.45, P = 0.01, I2 = 39.0%; CT vs. CC: OR = 1.37, 95%CI = 1.05-1.79, P = 0.02, I2 = 41.6%; CT + TT vs. CC: 1.37, 95%CI = 1.06-1.77, P = 0.02, I2 = 41.6%), rs10451941T/C (TC + CC vs. TT: OR = 1.79, 95%CI = 1.41-2.28, P < 0.01, I2 = 71.9%) polymorphisms and POAG susceptibility. In addition, further significant associations were also observed in the stratified analysis, especially in normal tension glaucoma groups and Caucasian descendants. CONCLUSION: The observed evidences suggest that OPA1 polymorphisms may be associate with POAG susceptibility significantly.

Overexpression of SH2D1A promotes cancer progression and is associated with immune cell infiltration in hepatocellular carcinoma via bioinformatics and in vitro study.

BACKGROUND: SH2 domain containing 1A (SH2D1A) expression has been linked to cancer progression. However, the functions of SH2D1A in hepatocellular carcinoma (HCC) have not been reported. METHODS: The effects of SH2D1A on the proliferation, migration, and invasion of HCC cells and the related pathways were re-explored in cell models with SH2D1A overexpression using the CCK-8, migration and invasion assays and western blotting. The functions and mechanisms of genes co-expressed with SH2D1A were analyzed using gene ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis. The relationship between SH2D1A expression and immune microenvironment features in HCC was explored. RESULTS: Elevated SH2D1A expression promoted cell proliferation, migration, and invasion, which was related to the overexpression of p-Nf-κB and BCL2A1 protein levels in HCC. SH2D1A expression was related to the immune, stromal, and ESTIMATE scores, and the abundance of immune cells, such as B cells, CD8+ T cells, and T cells. SH2D1A expression was significantly related to the expression of immune cell markers, such as PDCD1, CD8A, and CTLA4 in HCC. CONCLUSION: SH2D1A overexpression was found to promote cell growth and metastasis via the Nf-κB signaling pathway and may be related to the immune microenvironment in HCC. The findings indicate that SH2D1A can function as a biomarker in HCC.

Surface Modification with CuFeS2 Nanocrystals to Improve the Efficiency and Stability of Perovskite Solar Cells.

Poor stability retards the industrialization of perovskite solar cells (PSCs). One of the effective ways to solve this issue is to modify the perovskite surface to improve the efficiency and stability of the PSCs. Herein, we synthesized CuFeS2 nanocrystals and applied them to modify the perovskite surface. The efficiency of the PSCs with CuFeS2 modification is improved to 20.17% from 18.64% for the control devices. Some investigations demonstrate that the CuFeS2 modification passivates the perovskite surface defects and induces better energy band arrangement. Furthermore, the stability of the PSCs with CuFeS2 modification is improved compared with the devices without CuFeS2 modification. The efficiency of the PSCs with CuFeS2 modification maintains 93% of its initial value, whereas that of the devices without CuFeS2 modification decreases to 61% of the initial value. This work demonstrates that CuFeS2 is a novel material used as a modification layer to enhance the efficiency and stability of the PSCs.

Optical near fields for ablation of periodic structures.

The formation mechanism of laser-induced periodic surface structures (LIPSS) has been a key to high-resolution sub-diffraction lithography or high-efficiency large-area nanotexturing. We show the evolution of LIPSS formation from a nanohole seed structure to high-spatial-frequency LIPSS by using a tightly focused and rectangular-shaped laser beam with different shape-polarization orientations. Formation of LIPSS based on light intensity distribution without invoking any long-range electromagnetic modes achieved quantitative match between modeling and experiment. Our results clearly show the entire step-like and deterministic process of LIPSS evolution based on experimental data and numerical simulations, revealing the dominant structural near-field enhancement on the ripple formation. A rectangular-shaped beam with an aspect ratio of 7:3 was used to break the symmetry of a circularly shaped focus. By azimuthally rotating the orientation of the focal spot and the polarization, it is possible to visualize the far-field effect for the initial seed structure formation and the competition between the far and near fields in the subsequent structure evolution.

Transfer-Imprinting-Assisted Growth of 2D/3D Perovskite Heterojunction for Efficient and Stable Flexible Inverted Perovskite Solar Cells.

2D/3D perovskite heterostructures show great potential to boost efficiency and stability of perovskite solar cells (PSCs). Here, a solvent-free transfer-imprinting-assisted growth (TIAG) method is employed to in situ grow 2D/3D perovskite heterojunctions. The solid-state transfer of spacer cation by the TIAG process enables a spatially confined growth of the 2D perovskite interlayer with uniform morphology between the 3D perovskites and charge transport layer. Meanwhile, the pressure associated with the TIAG process promotes the crystalline orientation, which is beneficial to carrier transport. As a result, the inverted PSC achieved a PCE of 23.09% (with certified 22.93%) and maintained 90% of their initial PCE after aging at 85 °C for 1200 h or operating for 1100 h under continuous AM 1.5 illumination. Flexible inverted PSCs achieved a PCE of 21.14% with mechanical robustness by maintaining above 80% of their initial PCE after 10000 bending cycles under a 3 mm bending radius.

Nanoscale control of non-reciprocal ripple writing.

Femtosecond laser-induced deep-subwavelength structures have attracted much attention as a nanoscale surface texturization technique. A better understanding of the formation conditions and period control is required. Herein, we report a method of non-reciprocal writing via a tailored optical far-field exposure, where the period of ripples varies along different scanning directions, and achieve a continuous manipulation of the period from 47 to 112 nm (±4 nm) for a 100-nm-thick indium tin oxide (ITO) on glass. A full electromagnetic model was developed to demonstrate the redistributed localized near-field at different stages of ablation with nanoscale precision. It explains the formation of ripples and the asymmetry of the focal spot determines the non-reciprocity of ripple writing. Combined with beam shaping techniques, we achieved non-reciprocal writing (regarding scanning direction) using an aperture-shaped beam. The non-reciprocal writing is expected to open new paths for precise and controllable nanoscale surface texturing.

High-Resolution Patterning of Perovskite Quantum Dots via Femtosecond Laser-Induced Forward Transfer.

High-resolution patterning of perovskite quantum dots (PQDs) is of significant importance for satisfying various practical applications, including high-resolution displays and image sensing. However, due to the limitation of the instability of PQDs, the existing patterning strategy always involves chemical reagent treatment or mask contact that is not suitable for PQDs. Therefore, it is still a challenge to fabricate high-resolution full-color PQD arrays. Here, we present a femtosecond laser-induced forward transfer (FsLIFT) technology, which enables the programmable fabrication of high-resolution full-color PQD arrays and arbitrary micropatterns. The FsLIFT process integrates transfer, deposition, patterning, and alignment in one step without involving a mask and chemical reagent treatment, guaranteeing the preservation of the photophysical properties of PQDs. A full-color PQD array with a high resolution of 2 µm has been successfully achieved. We anticipate that our facile and flexible FsLIFT technology can facilitate the development of diverse practical applications based on patterned PQDs.

Femtosecond laser regulatory focus ablation patterning of a fluorescent film up to 1/10 of the scale of the diffraction limit.

Patterned quantum dots (QDs) and perovskites have attracted a great deal of attention in the fabrication of optoelectronic device arrays for transistors, image sensors and displays. However, the resolution of current patterning technologies is insufficient for nanopatterned QDs and perovskites to be integrated in advanced optoelectronic and photonic applications. Herein, we demonstrate a femtosecond laser regulatory focus ablation (FsLRFA) patterning technique of a fluorescent film involving both semiconductor core-shell QDs and perovskite up to 1/10th of the scale of the diffraction limit. Annular lines with a 200 nm-width are obtained after the irradiation of the femtosecond laser. Moreover, the combination of ablated different geometries enables the laser focal spot as brushes for FsLRFA patterning technology to fabricate delicate and programmable patterns on the fluorescent film. This technology with nanoscale resolution and patterning capability paves the road toward highly integrated applications based on QDs and perovskites.

Improved Performance of All-Inorganic Perovskite Light-emitting Diodes via Nanostructured Stamp Imprinting.

Halide perovskites are emerging emitters with excellent optoelectronic properties. Contrary to the large grain fabrication goal in perovskite solar cells, perovskite light-emitting diodes (PeLEDs) based on small grain enable efficient radiative recombination because of relatively higher charge carrier densities due to spatial confinement. However, achieving small-sized grain growth with superior crystal quality and film morphology remains a challenge. In this work, we demonstrated a nanostructured stamp thermal imprinting strategy to boost the surface coverage and improve the crystalline quality of CsPbBr3 film, particularly confine the grain size, leading to the improvement of luminance and efficiency of PeLEDs. We improved the thermal imprinting process utilizing the nanostructured stamp to selectively manipulate the nucleation and growth in the nanoscale region and acquire small-sized grain accompanied by improved crystal quality and surface morphology of the film. By optimizing the imprinting pressure and the period of the nanostructures, appropriate grain size, high surface coverage, small surface roughness and improved crystallization could be achieved synchronously. Finally, the maximum luminance and efficiency of PeLEDs achieved by nanostructured stamp imprinting with a period of 320 nm are 67600 cd/m2 and 16.36 cd/A, respectively. This corresponds to improvements of 123 % in luminance and 100 % in efficiency, compared to that of PeLEDs without the imprinting.

Femtosecond Laser Ablation of Quantum Dot Films toward Physical Unclonable Multilevel Fluorescent Anticounterfeiting Labels.

Femtosecond laser ablation (FsLA) technology has been demonstrated to achieve programmable ablation and removal of diverse materials with high precision. Owing to the cross-scale and digital processing characteristics, the FsLA technology has attracted increasing interest. However, the moderate repeatability of FsLA limits its application in the fabrication of advanced micro-/nanostructures due to the nonidentity of each laser pulse and fluctuation of environment. Fortunately, moderate repeatability combined with programmable ablation and high precision perfectly matches with the technical requirements of a physical unclonable fluorescent anticounterfeiting label. Herein, we applied FsLA to quantum dot (QD) films to fabricate a physical unclonable multilevel fluorescent anticounterfeiting label. Visual Jilin University logos, quick response (QR) codes, microlines, and microholes have been achieved for the multilevel anticounterfeiting functions. Of particular significance, the microholes with a macroidentical and microidentifiable geometry guarantee the physical unclonable functions (PUFs). Moreover, the fluorescent anticounterfeiting label is compatible with deep learning algorithms that facilitate authentication to be convenient and accurate. This work shows a fantastic future potential to be a core anticounterfeiting technique for commercial products and drugs.

Spatially modulated light harvesting with plasmonic crescent metasurface.

Harvesting light by metallic structures with sharp corners, or the so-called photonic singularities, has exhibit their potential in nanophotonics, sensing, and bio-medical applications. The high-quality light confinement of the light energy mainly relies on the precise preparation of nanoscale photonic singularities. However, the realization of massive photonic singularities still meets the challenges on integration and low-cost mask multiplexing. Here, we show an angle-dependent elevated nanosphere lithography to achieve massive photonic singularities for spatially modulated light harvesting at the near-infrared regime. The photonic geometrical singularity is constructed by the gold crescent array of plasmonic materials. The numerical simulation shows that the light can be localized at the spatially distributed singularities. This phenomenon is verified experimentally through the infrared spectral measurement. Our work provides the possibility to produce integrated light-harvesting devices for numerous optical applications in illumination, display, and enhanced nonlinear excitation.

Nucleation in situ of perylene crystal by femtosecond laser induced cavitation.

Organic semiconductor single crystal materials have broad application prospects in the field of high-performance optoelectronic devices because of their highly ordered structure, few defects, and high carrier mobility. However, it is difficult to control the nucleation location of crystal formation in the current commonly used crystal growth methods including physical vapor transport and solution processing, which makes it difficult to manufacture organic crystal devices. Laser-induced crystallization technology is expected to solve this problem. In this study, we demonstrated nucleation in situ of a perylene crystal by femtosecond laser induced cavitation. The results show that the crystallization of perylene crystals induced by the femtosecond laser is mainly due to the aggregation effect by laser cavitation bubbles caused by multiphoton absorption. This strategy facilitates the application of organic single crystals to optoelectronic devices.

High-Quality Patterning of CsPbBr3 Perovskite Films through Lamination-Assisted Femtosecond Laser Ablation toward Light-Emitting Diodes.

Metal halide perovskites have exhibited promising potential for practical applications such as image sensors and displays benefiting from their outstanding optoelectronic properties. However, owing to the instability of the perovskite materials, producing patterned perovskite films with adequately high quality and high precision for such practical applications poses a challenge for existing patterning methods. Herein, the lamination-assisted femtosecond laser ablation (LA-FsLA) technique was successfully applied to fabricate patterned CsPbBr3 films with sufficiently high quality and high precision. A sandwich-laminated structure (glass/CsPbBr3/glass) was introduced to avoid the impact of debris on the patterned perovskite film. As a result, arbitrarily patterned perovskite films with high quality, submicron precision, and well-defined edges were successfully prepared. Moreover, the light-emitting diodes (LEDs) based on the patterned perovskite films also exhibit good emission characteristics. This work provides a promising strategy for the fabrication of patterned perovskite films with adequately high quality and high precision toward perovskite-based optoelectronic devices.

Efficient and stretchable organic light-emitting devices based on spontaneously formed disordered wrinkles.

We propose a facile, scalable strategy to introduce spontaneously formed disordered wrinkles into organic light-emitting devices (OLEDs) to enhance light extraction and realize stretchability of the devices. The luminance and current efficiency of the wrinkled OLEDs are improved by 37% and 18%, respectively, compared to the planar device. Meanwhile, broadband light scattering induced by the disordered wrinkles results in angle-stable electroluminescent spectra at wide viewing angles for the wrinkled OLEDs. The disordered wrinkles enable the OLEDs to be stretchable and withstand hundreds of stretching-releasing cycles at strain between 0% and 5%. This study provides a simple method to realize stretchable OLEDs with high efficiency.

Efficient all-inorganic red perovskite light-emitting diodes with dual-interface-modified perovskites by vapor deposition.

Interface engineering has been extensively used in perovskite light-emitting diodes (PeLEDs), which proves to be an effective and intelligent approach for surface defect passivation. However, the existing passivation strategy is restricted to the solution process, which results in poor compatibility with vapor-deposited PeLEDs and moderate controllability. Here, we propose a dual-interface modification strategy to facilitate the performance improvement of vapor-deposited all-inorganic red PeLEDs. An ultrathin phenylethanamine bromide (PEABr) layer is introduced to both the upper and lower interfaces of the vapor-deposited perovskite emission layer by vapor deposition. The vapor deposition of the PEABr with fine-controlled film thickness is a reliable and simple process and compatible with vapor-deposited all-inorganic PeLEDs. The dual-interface modification plays an observable role in manipulating the crystallization and surface morphology of the CsPbBrI2 film, which is of significance for the improvement of the PeLEDs' performance. As a result, the red PeLEDs achieve a maximum luminance and external quantum efficiency of 2338 cd/m2 and 1.75%, corresponding to enhancements of 2.75 and 5.25 times compared with those of PeLEDs without PEABr. This approach paves the way to high-efficiency all-evaporated all-inorganic PeLEDs.

High-resolution in situ patterning of perovskite quantum dots via femtosecond laser direct writing.

Colloidal quantum dots (QDs) have exhibited great potential for optoelectronic applications, including displays, lasers, anti-counterfeiting and information storage. However, the high-resolution patterning technique of QDs is still a challenge, while precise patterned QDs are of great value for practical applications. Here, a femtosecond laser direct writing strategy was demonstrated for the in situ fabrication of high-resolution-patterned perovskite quantum dots (PQDs) by the laser-induced Marangoni flow to aggregate and deposit the PQDs based on the opto-thermoelectric mechanism. By regulating the laser power and the exposure time, the minimum line width could reach 1.58 µm. Importantly, through the patterning of red, green and blue PQDs, the strategy exhibited the applicability in full-color PQD materials. Moreover, the deposited PQDs can preserve the original photophysical properties including photoluminescence spectra and excited state lifetime. The approach provides a strategy to fabricate high-resolution patterned PQDs in situ, which is a promising alternative in photonic applications including high-resolution displays and anti-counterfeiting.