Perioperative anticoagulation in head and neck free flap reconstructions: Experience of an anticoagulative scheme and its modification.

OBJECTIVES: Microvascular anastomoses in microvascular reconstructions induce rheological changes in the anastomosed vessels and are usually counteracted by anticoagulative medication. There is no regimen commonly agreed on. This study provides an easy to use anticoagulative regimen. PATIENTS AND METHODS: Consecutive cases of either anticoagulative regimen between 2013 and 2018 that underwent microvascular reconstruction in the head and neck area were included in this retrospective study, resulting in 400 cases in total. Two different anticoagulative regimens were applied to 200 patients in each group: (a) intraoperatively administered unfractionated 5000 I.U. high molecular weight heparin (HMWH) and postoperatively low molecular weight heparin (LMWH, Enoxaparin) 1 mg/kg/body weight postoperatively and (b) intraoperatively LMWH 0.5 mg/kg/body weight as well as 12 h later and 1 mg/kg/body weight postoperatively. RESULTS: The LMWH cohort showed fewer overall thromboembolic (8.5% vs. 11%; p = .40) and peripheral thrombotic events (1% vs. 3.5%; p = .18) and lung embolisms (3% vs. 4%; p = .59). The number of thromboses at the site of the anastomosis was equally distributed. In regard to flap-specific complications, LMWH was associated with a positive effect, in particular with respect to total flap losses (5% vs. 7%; p = .40) and wound-healing disorders (14.5% vs. 20%; p = .145). CONCLUSION: Findings indicate that intra- and postoperatively administered LMWH as the only anticoagulative medication seems reliable in our clinical routine of head and neck free flap reconstructions.

Infantile human labial glands: Distribution of aquaporins and claudins in the context of paracellular and transcellular pathways.

Human labial glands consist of saliva-secreting cells which are formed by serous and predominantly mucous glandular cells. The following excretory duct system converts the isotonic saliva into a hypotonic fluid. Liquids are transported across the membrane of epithelial cells by paracellular or transcellular mode of action. We studied aquaporins (AQP) and tight junction proteins in the endpieces and duct system of human labial glands of 3-5-month-old infants for the first time. AQP1, AQP3, and AQP5 represent the transcellular transport; tight junction proteins like claudin-1, - 3, - 4, and - 7 regulate the permeability of the paracellular pathway. Specimens of 28 infants were included in this study and analyzed histologically. AQP1 was present in myoepithelial cells and in endothelial cells of small blood vessels. AQP3 showed basolateral plasmamembrane localization in glandular endpieces. AQP5 was localized at the apical cytomembrane in serous and mucous glandular cells and at the lateral membrane in serous cells. Ducts remained unstained with the antibody to AQP1, AQP3, and AQP5. Claudin-1, - 3, - 4, and - 7 were expressed mainly in the lateral plasmamembrane of serous glandular cells. In the ducts, claudin-1, - 4, and - 7 were detected at the basal cell layer, claudin-7 also at the lateral cytomembrane. Our findings provide new insights into the localization of epithelial barrier components necessary for regulating saliva-modification in infantile labial glands.

Three-Dimensional Analyses of Postoperative Effects of Surgically Assisted Rapid Palatal Expansion (SARPE) on the Soft Tissue of the Midface Region and the Upper Airway Space Using Stereophotogrammetry and Cone Beam Computed Tomography (CBCT).

BACKGROUND: Surgically assisted rapid palatal expansion (SARPE) is an established method to treat transverse maxillary hypoplasia in skeletally mature adult patients. SARPE affects the surrounding soft tissue. In addition, effects on the airway and breathing have been described. Aim of this study was to assess the effects of SARPE on the nasal soft tissue and the upper airway by means of three-dimensional stereophotogrammetry and cone beam computed tomography (CBCT). METHODS: This retrospective study used preoperative and postoperative cone beam computed tomography (CBCT) scans and three-dimensional stereophotogrammetry. Ten skeletally adult patients (4 male, 6 female; mean age 27.68 years) with transverse maxillary hypoplasia were included. Patients had undergone SARPE procedure, performed by the same surgical team using the same technique. Nasal soft tissue changes were analyzed, using three-dimensional stereophotogrammetry records taken preoperatively (t0) and at the postoperative checkup appointment (t1). The upper airway was assessed using CBCT scans for surgical planning (t0) and the first scan taken after SARPE (t1). RESULTS: In stereophotogrammetry, it was shown that only a few soft tissue nasal parameters increased significantly and SARPE leads to mainly clinically irrelevant changes in nasal soft tissue. In CBCT, only a significant increase in nasopharyngeal airway volume was found. DISCUSSION: Results were in alignment with literature. The effects of SARPE on the nasal soft tissue are mostly statistically insignificant and clinically irrelevant. Airway volume significantly increased in the nasopharyngeal area. Further research on SARPE effects should be conducted to reinforce SARPE as a treatment option for sleep apnea patients.

NAM-help or burden? Intercultural evaluation of parental stress caused by nasoalveolar molding: a retrospective multi-center study.

OBJECTIVES: Nasoalveolar molding (NAM) was developed to facilitate easier treatment and better outcomes for cleft lip and palate (CLP) patients. The aim of this study was to investigate the parental burden and possible intercultural differences of this treatment modality, which is often argued to burden parents to an extraordinary amount. MATERIALS AND METHODS: Standardized questionnaires (available in English, Mandarin, and German) with 15 non-specific and 14 NAM-specific items to be retrospectively answered by Likert scales by parents of unilateral CLP patients with completed NAM treatment. RESULTS: The parents of 117 patients from two treatment centers in Taiwan and Germany were included. A very high level of overall satisfaction was found in both countries with significant intercultural differences in prenatal parent information, feeding problems, dealing with 3rd party's perception, and experienced personal effort. CONCLUSION: NAM is an effective treatment tool for children's CLP deformities and their caregivers in overcoming the feeling of helplessness. Intercultural differences may be due to infrastructural reasons, cultural attitudes and habits, or different public medical education. CLINICAL RELEVANCE: In addition to facilitating easier surgical treatment, NAM can be seen as a powerful coping strategy for parents dealing with a CLP deformity of their child and does not seem to burden them extraordinarily.

Author Correction: A semi-automated virtual workflow solution for the design and production of intraoral molding plates using additive manufacturing: the first clinical results of a pilot-study.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Diversity of mucins in labial glands of infants.

Mucins as highly glycosylated proteins comprise multiple functions like protection, homeostasis, immune defense, cell signaling. Various epithelial tissues including glandular structures express different specific mucin types. We investigated labial salivary glands in infants for the occurrence of MUC1, MUC2, MUC3, MUC4, MUC5AC, MUC5B, and MUC7 by immunohistochemistry. MUC1 and MUC4 were detected in serous and ductal glandular cells, partially intensified at the apical plasma membrane. MUC3 was found in ductal glandular cells and in myoepithelial cells. MUC5B exhibited a mosaic expression pattern in mucous glandular endpieces. MUC2 and MUC7 were abundant in serous acini. Glandular structures were negative for MUC5AC. A comprehensive study of specific mucins in labial salivary glands of infants was presented for the first time. As a representative of the minor salivary glands, labial glands are, due to their localization, directly exposed to environmental influences. The distribution of a broad spectrum of mucins in infantile labial glands indicates their importance early in human development to sustain oral health.

RapidNAM: Algorithm for the Semi-Automated Generation of Nasoalveolar Molding Device Designs for the Presurgical Treatment of Bilateral Cleft Lip and Palate.

OBJECTIVE: Nasoalveolar molding (NAM) is an accepted presurgical treatment modality for newborns with cleft lip and palate (CLP). However, the therapy is time-consuming and requires high expertise. To facilitate the treatment, we reveal an algorithm for the automated generation of patient individual NAM devices for neonates with bilateral cleft lip and palate (BCLP) and present results of software validation. METHODS: The algorithm was implemented utilizing Python 2.7 and Blender 2.78a based on 17 digitized (3D-scanning) impressions of maxillae with BCLP. The algorithm segments alveolar structures, bridges clefts, and generates a series of NAM device designs, destined for 3D-printing for subsequent treatment. The datasets were used for first software tests. For validation, a follow-up study was carried out using six new, independent maxilla models. The generated NAM plate designs were examined regarding their potential clinical usability. Furthermore, a deviation analysis was carried out, which measured the plate models' and upper jaw models' surface deviations. RESULTS: Series of NAM devices were generated automatically in 21 out of 23 cases. We calculated an average surface deviation of 0.140 mm (SD: 0.016 mm). Four out of six plate series (follow-up trials) were assessed as probably usable with minor adjustments. CONCLUSION: The algorithm generates 3D-printable series of NAM device designs reliably. We expect most of the series to be clinically usable and that the first plates of each series will fit the patients' maxillae. SIGNIFICANCE: The proposed algorithm has the potential to reduce the therapist's manual work and therefore time effort/costs related to NAM.

Identifying perioperative volume-related risk factors in head and neck surgeries with free flap reconstructions - An investigation with focus on the influence of red blood cell concentrates and noradrenaline use.

INTRODUCTION: The amount of fluids administered intraoperatively seems to influence the postoperative outcome, and especially the transfusion of red blood cell concentrates (RBC) are known to have an increased risk of postoperative complications. This prospective study focuses on patients planned with microvascular free flap reconstruction and investigates the effect of various types and amounts of volumes given intraoperatively and on the intensive care unit with regard to overall postoperative complications. MATERIAL AND METHODS: In this prospective study, 52 consecutive patients planned for reconstruction with microvascular free flaps were included. Intraoperatively administered volumes including blood products were documented by the anesthesiologists as well as volumes given during the intensive care unit stay. Postoperative complications were registered for the entire hospital stay. Statistical analysis was carried out correlating the amount and type of volumes with the incidence of postoperative complications. RESULTS: The intraoperative use of RBC showed a close to statistically significant increased risk of postoperative complications (mean/SD concentrates: 0.5/1.1 [no complications] vs. 1.0/1.4 [complications], p = 0.058). In a multivariate analysis with stepwise selection the use of human albumin, gelatin, or Ringer's acetate showed no correlation with complications. The overall blood loss, however, had no significant influence on the incidence of complications (mean/SD ml: 1187/761 [no complications] vs. 1004/600 [complications], p = 0.37). The use of noradrenalin during reconstructive surgeries with microvascular flaps bears statistically no increased risk of failure (mean/SD µg/kg/min: 36/23 [no flap loss] vs. 22/15 [flap loss], p = 0.289) or complications (mean/SD µg/kg/min: 34/22 [no complications] vs. 35/23 [complications], p = 0.807). CONCLUSION: In our investigation, the use of crystalloids and colloids seems to have no influence on the postoperative outcome, but the use of RBC may have an increased overall incidence of postoperative complications. A careful hemostasis to limit the use of RBC remains essential despite available options of substitutions. The use of infusion-pump-administered noradrenaline seems valuable to sustain a stable circulation during surgeries with microvascular free flaps and may have no negative impact on postoperative complications.

Prenatal intrauterine maxillary development - An evaluation with three-dimensional ultrasound.

OBJECTIVES: The aim of this prospective study was to investigate normal fetal maxillary development with volume ultrasound during the prenatal phase, for a better estimation of maxillary growth processes. METHODS: Some 210 3D volumes were obtained in two measurement series from 38 healthy women (gestational age: 19+2 to 31+4 weeks) using a GE Voluson™ E10 ultrasound system. Maxillary length and width were determined in the axial and sagittal planes. Clearly defined, reproducible landmarks were used for measurements. The results were correlated with gestational age and compared with previously reported studies. RESULTS: Total maxillary length ranged from 10.30 to 24.75 mm, total maxillary width from 13.65 to 37.30 mm in an observation period during the second trimester, with high reproducibility for all landmarks. All evaluation results showed steep growth with exponential character. Length growth was determined to be more dominant than width growth. Intra-rater correlation was evaluated to be almost perfect (ICC (3) > 0.8). CONCLUSION: This study presents measurements of physiological fetal maxillary development. The defined landmarks proved to be representative for further investigations. This study serves as a baseline for a better understanding of fetal maxillary growth processes, and may be useful for standardising detection of malformations or intrauterine growth restrictions.

The absolute and relative effects of presurgical nasoalveolar moulding in bilateral cleft lip and palate patients compared with nasal growth in healthy newborns.

BACKGROUND: This study investigated the efficiency of nasoalveolar moulding (NAM) in patients presenting with bilateral cleft lip and palate (BCLP). It focused explicitly on nasal outcome and therefore made comparisons with healthy age-matched infants with normal nasal development. METHODS: Nasal impressions from 19 BCLP patients were analysed at the beginning and at the end of NAM treatment. In addition, nasal impressions from 32 healthy newborns were taken monthly for 4 months. The casts were digitalized and analysed, using defined anatomic landmarks, by two independent observers. Initial values were compared with outcome parameters at the end of NAM therapy and with the healthy cohort. RESULTS: NAM significantly elongated the columella in BCLP patients, with an increase of 106.5% versus 14.5% in healthy newborns. Nostril height showed significant expansion from 4.2 mm to 5.6 mm on the right side, and from 4.3 mm to 6.2 mm on the left side. CONCLUSION: NAM significantly elongated columella length and increased nostril height. The comparison with healthy newborns showed the effectiveness of early cartilage moulding. Detailed knowledge about absolute and relative early nasal growth was gained. However, despite highly effective NAM treatment in BCLP, nasal dimensions will not reach healthy proportions.

Evaluation of a portable low-budget three-dimensional stereophotogrammetry system for nasal analysis.

BACKGROUND: Three-dimensional (3D) photogrammetry has reached high standards and accuracy but is mainly conducted with stationary and expensive systems. The purpose of this study was to evaluate the accuracy of a low-budget portable system with special regard to the gracile and challenging nasal region. MATERIAL AND METHODS: 3D models of the perinasal area were acquired by impression-taking and the scanning of the generated plaster models (3Shape D500) or with a portable low-budget 3D stereophotogrammetry (FUEL3D® SCANIFY®) system. Four examiners analysed defined landmarks of the generated Standard Tessellation Language files with regard to accuracy and interobserver reliability by using 3dMDvultus™ software. A semi-automatic 3D best-fit analysis of both models was performed by using Geomagic® and the Root Mean Squared (RMS) errors were calculated. RESULTS: 41 volunteers were included, with 22 perinasal and perioral landmarks, 15 3D distances and eight 3D angles being analysed per data set. In a point-based analysis the mean spreads were partially smaller in the plaster model scans. Most measurements showed very high (>0.8) to excellent (>0.9) intraclass correlation coefficients, the lowest being found for columella length (0.686) and left nostril width (0.636). Overall, the mean RMS error between the superimposed surfaces was 0.89 ± 0.22 mm in the best-fit analysis. CONCLUSIONS: The corresponding software program was operator-friendly. The findings indicate that the analysed, affordable and portable system is a feasible solution for 3D image acquisition with comparable accuracy reported in the literature. Further studies will analyse the feasibility in neonates.

Stress Distribution Patterns within Viscero- and Neurocranium during Nasoalveolar Molding: a Finite Element Analysis.

BACKGROUND: The purpose of this study was to evaluate the stress distribution patterns within the viscero- and neurocranium of neonates during nasoalveolar molding. METHODS: Finite element models of 3 different healthy neonates at different times of life (date of birth, 4 weeks, and 3.5 months) were generated on the basis of computed tomography scans. A validated workflow, including segmentation, meshing, setting of boundary conditions, and implementation of a bone density-dependent material model, was carried out for each model. A small and a large unilateral alveolar and hard palatal cleft were virtually cut in each model. The stress distribution pattern in each model was then analyzed by using Ansys APDL. RESULTS: Convergence analysis validated the results. The virtual experiments at the date of birth showed a stress pattern above a previously defined threshold value of 30,000 Pa in the ipsilateral naso-orbital-complex, frontal sinus, and the anterior fossa of the base of the skull, with von Mises values > 35,000 Pa. Stress patterns at the age of 4 weeks and 3.5 months showed reduced von Mises values at < 15,000 Pa. CONCLUSIONS: Nasoalveolar molding therapy is a safe presurgical treatment modality without significant influence on the viscero- and neurocranium of neonates. Treatment, considering the stress distribution at the naso-orbital-complex and anterior fossa of the base of the skull, should begin in the second week of life, and treatment initiation of preterm infants should be adapted respectively.

Facilitating CAD/CAM nasoalveolar molding therapy with a novel click-in system for nasal stents ensuring a quick and user-friendly chairside nasal stent exchange.

Nasoalveolar molding (NAM) aims to improve nasal symmetry with a nasal stent in cleft lip and palate (CLP) patients. When plates have to be exchanged because of dentoalveolar growth or cleft reduction, the nasal stent has to be mounted onto a new plate. This procedure elongates visiting hours for patients and parents or requires second treatment sessions. This study introduces a quick-lock additive manufacturing solution for chairside nasal stent exchange called RapidNAM. A novel taping retention pin has been designed that enables nasal stent insertion. Patients with unilateral CLP were included in this study. Plaster models were digitalized and measured by two independent observers. Two methods of CAD/CAM-molding therapies were compared: (i) conventional adhesion of a nasal stent (CAD/CAM NAM); (ii) quick-lock system in which the nasal stent was transferred to another plate (RapidNAM). CAD/CAM NAM and its refinement RapidNAM significantly increased the cleft-side nasal height and tilted the nose towards symmetry. The quick-lock system minimizes wire adaptations, since the pre-existing stent can be reused. The new nasal stent development seems a feasible solution to minimize visiting hours but with clinically satisfactory results. This new nasal stent system combines traditional elements of NAM with CAD/CAM-technology.

A semi-automated virtual workflow solution for the design and production of intraoral molding plates using additive manufacturing: the first clinical results of a pilot-study.

Computer-aided design and computer-aided manufacturing (CAD/CAM) technology has been implemented in the treatment of cleft lip and palates (CLP) by several research groups. This pilot study presents a technique that combines intraoral molding with a semi-automated plate generation and 3D-printing. The clinical results of two intraoral molding approaches are compared. This is the first clinical investigation of semi-automated intraoral molding. Our study included newborns with unilateral CLP. Plaster models were digitalized and measured by two independent observers. Two methods of CAD/CAM-assisted intraoral molding were compared: (i) stepwise manual design of molding plates (conventional CAD/CAM-intraoral molding) and (ii) a semi-automated approach with an automated detection of alveolar ridges (called RapidNAM) assisted by a graphical user interface (GUI). Both approaches significantly narrowed the clefts and resulted in a harmonic alveolar crest alignment. The GUI was easy to use and generated intraoral molding devices within minutes. The presented design solution is an efficient technical refinement with good clinical results. The semi-automated plate generation with a feasible GUI is fast but allows individual adaptations. This promising technique might facilitate and foster the more widespread use of CAD/CAM-technology in intraoral molding therapy.

The possibilities of a portable low-budget three-dimensional stereophotogrammetry system in neonates: a prospective growth analysis and analysis of accuracy.

BACKGROUND: With the technical development, portable three-dimensional (3D) photogrammetry systems are becoming more en vogue because of cost-effectiveness and comparable accuracy to common stationary 3D systems. The purpose of the study was to evaluate the feasibility and accuracy of a low-budget portable system for 3D image acquisition with special regard to the gracile nasal region in neonates. Furthermore, the study aimed to establish a 3D data set of the first 180 days post partum. METHODS: Thirty-three healthy, full-term newborn were enrolled and 3D photographs were prospectively taken monthly with a portable low-budget 3D stereophotogrammetry system (FUEL3D® SCANIFY®) for six months. In the third month, age-matched and corresponding 3D models were acquired by taking an impression of the perinasal area. The resulting plaster models were scanned (3Shape D700, 3Shape® A/S, Denmark). Three examiners analyzed independently 21 defined landmarks of the generated Standard Tessellation Language files with regard to accuracy by using 3dMDvultus™ software. A semi-automatic 3D best-fit analysis of 3D photo and plaster models were performed by using Geomagic® and the Root Mean Squared (RMS) errors were calculated. RESULTS: Statistically significant changes of midfacial distances and angles with a focus on nasal growth during the first 180 days postpartum could be specified in absolute and relative dimensions. Best-fit analysis in the third month revealed a RMS error of 0.72 ± 0.22 mm with a mean standard deviation of 0.71 ± 0.21 mm. CONCLUSIONS: The analyzed portable 3D stereophotogrammetry system is a feasible methodology with good accuracy, even in newborn. A description of the growth as well as the establishment of a 3D data set was performed. Its implementation for basic documentation for example in cleft patients is possible and might reduce the need for impressions and facilitate the communications with parents and the interdisciplinary team.

Establishment of a finite element model of a neonate's skull to evaluate the stress pattern distribution resulting during nasoalveolar molding therapy of cleft lip and palate patients.

Nasoalveolar Molding (NAM) is associated with ambivalent acceptance regarding effectiveness and unknown long-term results. Our purpose was to analyze the stress distribution patterns within the viscero- and neurocranium of neonates during the first phase of NAM therapy. A finite element (FE) model of a healthy four-week-old neonate was generated, derived from a computed tomography scan allowing the implementation of a bone-density-dependent material model. The influence of dental germs with variable material properties, the cleft width and area of expected force application were analyzed in a worst-case scenario. The resulting stress distribution patterns for each situation were analyzed using the software Ansys APDL. The established FE model was verified with a convergence analysis. Overall, stress patterns at the age of four weeks showed von Mises stress values below 60.000 Pa in the viscero- and neurocranium. The influences of the allocation of material properties for the dental germs, the area of force application, and the cleft width were negligible. A workflow to simulate the stress distribution and deformation in neonates attributable to various areas of force application has been established. Further analyses of the skulls of younger and older neonates are needed to describe the stress distribution patterns during NAM therapy.

A prospective longitudinal study of postnatal dentoalveolar and palatal growth: The anatomical basis for CAD/CAM-assisted production of cleft-lip-palate feeding plates.

This study describes the dentoalveolar and palatal growth during the first months of life. Knowledge concerning this development is essential to avoid unwanted events such as mucosal ulcerations or restriction of growth when cleft-lip and palate (CLP) patients are treated. The results involve the generation of CAD/CAM CLP-feeding plates. Intraoral impressions from 32 healthy newborns were taken monthly for 5 months, supplemented by measurements of body weight, length, and occipital-frontal head circumference. The casts were digitalized, and two observers manually selected defined anatomical landmarks on virtual 3-D models. The distances between these landmarks were evaluted. Statistical analysis included an inter-rater agreement analysis and the determination of growth. In total, 213 casts were analyzed, with 65 models excluded because of inaccuracies in impression-taking or cast production. Overall longitudinal growth was 20.3%, whereas transversal growth reached a maximum of 21.1%. Vertical growth was 32.4% at the tuberal level. On the basis of these results, a semiautomated series of feeding plates allowing for monthly expansion could be generated. The acquired data serve as a useful reference for other pediatric and orthofacial investigations and treatments. One such application is the automated, fully virtual manufacture of CLP-feeding plates based on only one impression-taking. Our data reveal when caution is needed to prevent ulceration. The series of plates generated can minimize the time-consuming impression-taking and the production of further plaster models. The method of measurement is suitable for documentary purposes. Clin. Anat. 30:846-854, 2017. © 2017 Wiley Periodicals, Inc.

RapidNAM: generative manufacturing approach of nasoalveolar molding devices for presurgical cleft lip and palate treatment.

Nasoalveolar molding (NAM) is an accepted treatment strategy in presurgical cleft therapy. The major drawbacks of the treatment listed in the literature relate to the time of the treatment and the coordination of the required interdisciplinary team of therapists, parents, and patients. To overcome these limitations, we present the automated RapidNAM concept that facilitates the design and manufacturing process of NAM devices, and that allows the virtual modification and subsequent manufacture of the devices in advance, with a growth prediction factor adapted to the patient's natural growth. The RapidNAM concept involves (i) the prediction of three trajectories that envelope the fragmented alveolar segments with the goal to mimic a harmonic arch, (ii) the extrusion from the larger toward the smaller alveolar segment along the envelope curves toward the harmonic upper alveolar arch, and (iii) the generation of the NAM device with a ventilation hole, fixation pin, and fixation points for the nasal stents. A feasibility study for a vector-based approach was successfully conducted for unilateral and bilateral cleft lip and palate (CLP) patients. A comparison of the modified target models with the reference target models showed similar results. For further improvement, the number of landmarks used to modify the models was increased by a curve-based approach.

Functional Outcome of CAD/CAM-Assisted versus Conventional Microvascular, Fibular Free Flap Reconstruction of the Mandible: A Retrospective Study of 30 Cases.

Background Different advantages of virtually planned and guided mandibular reconstructions have been described. Functional analyses and comparisons with conventionally reconstructed patients. Methods We retrospectively analyzed 30 cases of mandibular reconstructions that involved virtually planned or conventional microvascular, fibular free flaps that occurred between April 2011 and December 2014 at a single center. The results were also compared with a healthy cohort of 30 participants. Axiographic measurements were performed postoperatively, and uni- and multivariate regressions analyses were performed to determine the association between possible predictor variables on functional outcome. Results Operation time, hospital stay, number of osteotomies, incidence of postoperative temporomandibular joint pain, noise, and tension did not differ significantly between the conventional and computer-aided design/computer-aided manufacturing (CAD/CAM) groups (each p > 0.05). Mouth opening and protrusion and laterotrusion also did not differ significantly (each p > 0.05) but were significantly reduced compared with the healthy group. Univariate analysis showed a significant influence of postoperative irradiation on mouth opening and laterotrusion in the conventional group (p = 0.047 and p = 0.028). In addition, multivariate analysis showed a significant influence of indication and number of osteotomies on laterotrusion (p = 0.005 and p = 0.043). Uni and multivariate analyses revealed a significant influence of indication, preoperative irradiation, and number of osteotomies on protrusion and mouth opening in the CAD/CAM group (p = 0.016, p = 0.044, and p = 0.028). Conclusion CAD/CAM-assisted reconstructions of the mandible give comparable functional results with those of the conventional technique, but no functional superiority has been established. Nevertheless, the integration of virtual planning and guided surgery is definitely of significant value but should be indicated individually case by case.

Axiographic results of CAD/CAM-assisted microvascular, fibular free flap reconstruction of the mandible: A prospective study of 21 consecutive cases.

Virtual planning and guided reconstruction of the mandible following ablative surgery have become standard procedures in reconstructive surgery. Many advantages regarding operation time, morphology, bony fit, and consolidation have been described, but analyses of the functional outcome of virtually planned mandibular reconstructions are lacking. We prospectively analyzed 21 consecutive cases of mandibular reconstructions using CAD/CAM-assisted microvascular, fibular free flaps in operations between July 2014 and January 2016 at a single center. Axiographic measurements were performed preoperatively and at 10 days and 3 months postoperatively and were correlated with clinical findings. Uni- and multivariate regression analyses were performed to determine the association between possible predictor variables on functional outcomes. Overall, no statistical differences between the t1 and t3 measurements were seen in the analyzed variables. The univariate analysis showed a significant influence of indication and pre- and postoperative irradiation only on mouth opening (p = 0.018, p = 0.026, and p = 0.049). Timing, the number of osteotomies, and the incidence of wound healing disturbances had no significant influence on postoperative function (p = 0.753, p = 0.69 and p = 0.776). In particular, cases without malignancy or preoperative irradiation benefitted from the integration of the CAD/CAM technique and showed good functional outcomes.