Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 15 de 15
Filtrar
1.
Environ Sci Technol ; 58(16): 7124-7132, 2024 Apr 23.
Artículo en Inglés | MEDLINE | ID: mdl-38599582

RESUMEN

Often large quantities of plastics are found in compost, with price look-up stickers being a major but little-explored component in the contamination path. Stickers glued to fruit or vegetable peels usually remain attached to the organic material despite sorting processes in the composting plant. Here, we investigated the effects of industrial composting on the structural alterations of these stickers. Commercial polypropylene (PP) stickers on banana peels were added to a typical organic material mixture for processing in an industrial composting plant and successfully resampled after a prerotting (11 days) and main rotting step (25 days). Afterward, both composted and original stickers were analyzed for surface and structural changes via scanning electron microscopy, Fourier-transform infrared spectroscopy, and micro- and nano-X-ray computed tomography (CT) combined with deep learning approaches. The composting resulted in substantial surface changes and degradation in the form of microbial colonization, deformation, and occurrence of cracks in all stickers. Their pore volumes increased from 16.7% in the original sticker to 26.3% at the end of the compost process. In a similar way, the carbonyl index of the stickers increased. Micro-CT images additionally revealed structural changes in the form of large adhesions that penetrated the surface of the sticker. These changes were accompanied by delamination after 25 days of composting, thus overall hinting at the degradation of the stickers and the subsequent formation of smaller microplastic pieces.


Asunto(s)
Compostaje , Frutas , Plásticos , Tomografía Computarizada por Rayos X , Suelo/química , Microscopía Electrónica de Rastreo , Polipropilenos/química
3.
Bioinspir Biomim ; 18(3)2023 04 19.
Artículo en Inglés | MEDLINE | ID: mdl-36881911

RESUMEN

Certain superhydrophobic plants, such asSalvinia molesta, are able to adsorb oil films from water surfaces and thus separate the oil from the water. There are first attempts to transfer this phenomenon to technical surfaces, but the functional principle and the influence of certain parameters are not yet fully understood. The aim of this work is to understand the interaction behavior between biological surfaces and oil, and to define design parameters for transferring the biological model to a technical textile. This will reduce the development time of a biologically inspired textile. For this purpose, the biological surface is transferred into a 2D model and the horizontal oil transport is simulated in Ansys Fluent. From these simulations, the influence of contact angle, oil viscosity and fiber spacing/diameter ratio was quantified. The simulation results were verified with transport tests on spacer fabrics and 3D prints. The values obtained serve as a starting point for the development of a bio-inspired textile for the removal of oil spills on water surfaces. Such a bio-inspired textile provides the basis for a novel method of oil-water separation that does not require the use of chemicals or energy. As a result, it offers great added value compared to existing methods.


Asunto(s)
Biónica , Textiles , Agua/química , Simulación por Computador
4.
Sci Total Environ ; 855: 158889, 2023 Jan 10.
Artículo en Inglés | MEDLINE | ID: mdl-36150589

RESUMEN

Compost application is a widely recommended agricultural practice to improve soil fertility. As almost all compost is likely polluted with plastic we hypothesize that compost application is a major input pathway for microplastics (MPs) into agricultural soil. To attribute the plastic load of soil to compost application, we investigated MPs in topsoil (0-30 cm) of a controlled, long-term fertilizer trial with application of compost made of municipal biowaste (0, 5, 10, and 20 t ha-1a-1), which ended 11 years ago. Microplastics were analyzed via density separation (ZnCl2) and light microscopy; testing this method recovered 92 ± 10 % of spiked plastic items. The fields of the long-term compost trial showed a MP load of 0-64 items kg-1, corresponding to MP stocks in the plough layer (0-30 cm) that ranged from 38.2 ± 55.5 million to 171.4 ± 57.5 million items ha-1. Microplastic stocks and contents increased with increasing amount of compost application. Thus, we confirm compost as a major input pathway for MPs into agricultural soil, with the effect still visible after 11 years. Comparison of calculated plastic input based on MP contents of recent German compost with MP loads found in soil revealed that overall compost application explained <6 % of total MP stocks. We assume that compost applied in earlier days contained higher plastic loads than recent ones, reflecting current awareness and successful efforts in reducing plastic loads during compost production. However, as the plots at the border of the field had up to 18 times higher MP loads than the inner plots of the trial, we suggest that littering also contributed significantly to MP pollution. Thus, even if given compost applications still add plastics to environment, other sources such as littering can already have become the dominating input pathway.


Asunto(s)
Compostaje , Suelo , Microplásticos , Plásticos , Fertilizantes
5.
Beilstein J Nanotechnol ; 13: 1370-1379, 2022.
Artículo en Inglés | MEDLINE | ID: mdl-36483637

RESUMEN

Superhydrophobic surfaces are well known for most different functions in plants, animals, and thus for biomimetic technical applications. Beside the Lotus Effect, one of their features with great technical, economic and ecologic potential is the Salvinia Effect, the capability to keep a stable air layer when submerged under water. Such air layers are of great importance, e.g., for drag reduction (passive air lubrication), antifouling, sensor applications or oil-water separation. Some biological models, e.g., the floating fern Salvinia or the backswimmer Notonecta, show long term stable air retention even under hydrodynamic conditions. Therefore, they are ideal models for the development of technical biomimetic air retaining surfaces. Up to now, several prototypes of such surfaces have been developed, but none provides both, stable air retention and cost effective large scale production. Meanwhile, a novel biomimetic surface is commercially available and produced on a large scale: an adhesive elastomeric film with mushroom-shaped surface microstructures that mimic the adhesion system of animals. In this study, we show that these films, which have been initially developed for a different purpose, due to their specific geometry at the microscale, are capable of stable air retention under water. We present first results concerning the capabilities of mushroom-shaped surface microstructures and show that this elastomer foil is able to stabilize a permanent air layer under water for more than two weeks. Further, the stability of the air layer under pressure was investigated and these results are compared with the predicted theoretical values for air retention of microstructured surfaces. Here, we could show that they fit to the theoretical predictions and that the biomimetic elastomer foil is a promising base for the development of an economically and efficient biomimetic air retaining surface for a broad range of technical applications.

6.
Front Plant Sci ; 13: 880439, 2022.
Artículo en Inglés | MEDLINE | ID: mdl-35685010

RESUMEN

Plants and other organisms have evolved structures and mechanisms for colonizing land since the Early Ordovician. In this context, their surfaces, the crucial physical interface with the environment, are mainly considered barriers against water loss. It is suggested that extreme water repellency (superhydrophobicity) was an additional key innovation for the transition of algae from water to land some 400 mya. Superhydrophobicity enhances gas exchange on land and excludes aquatic competitors in water films. In a different context, in material science and surface technology, superhydrophobicity has also become one of the most important bioinspired innovations enabling the avoidance of water films and contamination. Here, we present data for an extremely water-repellent cyanobacterial biofilm of the desiccation tolerant Hassallia byssoidea providing evidence for a much earlier prokaryotic Precambrian (ca. 1-2 bya) origin of superhydrophobicity and chemical heterogeneities associated with land transition. The multicellular cyanobacterium is functionally differentiated in a submerged basal hydrophilic absorbing portion like a "rhizoid" and an upright emersed superhydrophobic "phyllocauloid" filament for assimilation, nitrogen fixation, and splash dispersed diaspores. Additional data are provided for superhydrophobic surfaces in terrestrial green algae and in virtually all ancestral land plants (Bryophytes, ferns and allies, Amborella, Nelumbo), slime molds, and fungi. Rethinking of superhydrophobicity as an essential first step for life in terrestrial environments is suggested.

7.
ACS Omega ; 7(15): 12978-12992, 2022 Apr 19.
Artículo en Inglés | MEDLINE | ID: mdl-35474778

RESUMEN

There is a growing trend toward the use of interaction network methods and algorithms, including community-based detection methods, in various fields of science. The approach is already used in many applications, for example, in social sciences and health informatics to analyze behavioral patterns during the COVID-19 pandemic, protein-protein networks in biological sciences, agricultural science, economy, and so forth. This paper attempts to build interaction networks based on high-entropy alloy (HEA) descriptors in order to discover HEA communities with similar functionality. In addition, these communities could be leveraged to discover new alloys not yet included in the data set without any experimental laboratory effort. This research has been carried out using two community detection algorithms, the Louvain algorithm and the enhanced particle swarm optimization (PSO) algorithm. The data set, which is used in this paper, includes 90 HEAs and 6 descriptors. The results reveal 13 alloy communities, and the accuracy of the results is validated by the modularity. The experimental results show that the method with the PSO-based community detection algorithm can achieve alloy communities with an average accuracy improvement of 0.26 compared to the Louvain algorithm. Furthermore, some characteristics of HEAs, for example, their phase composition, could be predicted by the extracted communities. Also, the HEA phase composition has been predicted by the proposed method and achieved about 93% precision.

8.
Sci Total Environ ; 760: 143335, 2021 Mar 15.
Artículo en Inglés | MEDLINE | ID: mdl-33199003

RESUMEN

To maintain and improve soil fertility, compost application is a widely recommended practice. We hypothesized that this practice is, however, also a main entry path for plastic into soil. Hence, we i) quantified the prevalence of plastic in eight composts from different composting plants and hardware stores to derive estimations about related plastic inputs into soil, and ii) characterized the properties of these plastic residues in regard to size and shape for further risk assessment. Plastic remains were analyzed via density separation (ZnCl2) and light microscopy. Testing this method recovered 80 ± 29% of spiked plastic items. Applying this method revealed that all composts contained plastic particles in detectable amounts, with contents ranging from 12 ± 8 to 46 ± 8 particles kg-1, corresponding to calculated plastic weights of 0.05 ± 0.08 to 1.36 ± 0.59 g kg-1. Because of this high variability, an a-priori discrimination of plastic loads between compost types cannot be achieved. Upscaling these loads to common recommendations in composting practice, which range from 7 to 35 t compost ha-1, suggest that compost application to agricultural fields goes along with plastic loads of 84,000 to 1,610,000 plastic items ha-1 per year (a), respectively, amounting to 0.34 to 47.53 kg plastic ha-1 a-1. Large potential inputs should thus also occur for horticultural soils, where application rates of compost usually vary between 6.48 and 19.44 t ha-1, therewith resulting in a minimum plastic contamination of 77,770 plastic items and 0.31 kg plastic ha-1 a-1, but a maximum amount of up to 894,240 plastic items and 26.4 kg plastic ha-1 a-1. We conclude that compost application must be considered as potential source of plastic for both agricultural and horticultural soils, and technical solutions are needed to minimize these contamination risks while continuing this practice as important option to secure soil health.

9.
Annu Int Conf IEEE Eng Med Biol Soc ; 2020: 4278-4281, 2020 07.
Artículo en Inglés | MEDLINE | ID: mdl-33018941

RESUMEN

Resistive pulse sensors (RPS) are based on the detection principle of partial and non-permanent obstruction of an electrically conducting channel. The integration of RPS in microfluidics has the potential for detections at the molecular level. Current challenges involve limitations in fabrication technology, most notably the finite structure accuracy and fabrication repeatability, which have a direct and strong impact on RPS device performance. In this work, we analyzed the geometrical structure and performance of a nanofabricated RPS device and iteratively used the experimental data to propose an adequate numerical model which also accounts for fabrication imperfections beyond the optical resolution limit. The proposed model for a nano-RPS was validated and able to augment the understating of the structure and operation of a microdevice.Clinical Relevance- This work is part of a greater effort to bring microfluidics devices closer to patients for bedside analysis of blood, or other human fluids, for instance. These devices can potentially perform screening for multiple targets in one sample. New devices often need to go through design, prototyping and bench tests, simulation models as the one presented can increase the chances of the device to get to the market in reduced time.


Asunto(s)
Técnicas Analíticas Microfluídicas , Nanoporos , Frecuencia Cardíaca , Humanos , Microfluídica
10.
Beilstein J Nanotechnol ; 10: 459-466, 2019.
Artículo en Inglés | MEDLINE | ID: mdl-30873316

RESUMEN

Angiosperms and their pollinators are adapted in a close co-evolution. For both the plants and pollinators, the functioning of the visual signaling system is highly relevant for survival. As the frequency range of visual perception in many insects extends into the ultraviolet (UV) region, UV-patterns of plants play an important role in the flower-pollinator interaction. It is well known that many flowers contain UV-absorbing pigments in their petal cells, which are localized in vacuoles. However, the contribution of the petal surface microarchitecture to UV-reflection remains uncertain. The correlation between the surface structure and its reflective properties is also relevant for biomimetic applications, for example, in the field of photovoltaics. Based on previous work, we selected three model species with distinct UV-patterns to explore the possible contribution of the surface architecture to the UV-signaling. Using a replication technique, we transferred the petal surface structure onto a transparent polymer. Upon illumination with UV-light, we observed structural-based patterns in the replicas that were surprisingly comparable to those of the original petals. For the first time, this experiment has shown that the parameters of the surface structure lead to an enhancement in the amount of absorbed UV-radiation. Spectrophotometric measurements revealed up to 50% less reflection in the UV-absorbing regions than in the UV-reflecting areas. A comparative characterization of the micromorphology of the UV-reflecting and UV-absorbing areas showed that, in principle, a hierarchical surface structure results in more absorption. Therefore, the results of our experiments demonstrate the structural-based amplification of UV-reflection and provide a starting point for the design of bioinspired antireflective and respectively strongly absorbing surfaces.

11.
Beilstein J Nanotechnol ; 9: 3039-3047, 2018.
Artículo en Inglés | MEDLINE | ID: mdl-30591851

RESUMEN

In technical systems, static pressure and pressure changes are usually measured with piezoelectric materials or solid membranes. In this paper, we suggest a new biomimetic principle based on thin air layers that can be used to measure underwater pressure changes. Submerged backswimmers (Notonecta sp.) are well known for their ability to retain air layers on the surface of their forewings (hemelytra). While analyzing the hemelytra of Notonecta, we found that the air layer on the hemelytra, in combination with various types of mechanosensitive hairs (clubs and pins), most likely serve a sensory function. We suggest that this predatory aquatic insect can detect pressure changes and water movements by sensing volume changes of the air layer under water. In the present study, we used a variety of microscopy techniques to investigate the fine structure of the hemelytra. Furthermore, we provide a biomimetic proof of principle to validate our hypothesis. The suggested sensory principle has never been documented before and is not only of interest for sensory biologists but can also be used for the development of highly sensitive underwater acoustic or seismographic sensory systems.

12.
Plant Physiol Biochem ; 132: 229-237, 2018 Nov.
Artículo en Inglés | MEDLINE | ID: mdl-30219740

RESUMEN

Adjuvants such as surfactants are commonly incorporated into agrochemical formulations to enhance the biological efficiency of foliar sprays by improving the wetting behavior of the spray and/or the penetration of the active ingredients into the leaf tissues. Penetration accelerating adjuvants are known to increase the cuticular permeability and may alter the cuticular barrier to water loss. However, none or very little emphasis has been given to the impacts of adjuvants on crop water balance or drought tolerance, a very important factor affecting crop performance under water scarcity. Two model crops with strongly varying leaf traits, kohlrabi (Brassica oleracea) and apple (Malus domestica) seedlings were grown in controlled environments. Three adjuvants with varying solubility in the cuticle, i.e. octanol-water partition coefficients (logKow) were selected: rapeseed methyl ester (RME) and the surfactants alkyl polyglycoside (APG) and polyoxyethylated tallow amine (POEA). The higher the logKow of the adjuvant, the stronger was the increase of minimum epidermal conductance (gmin, an essential parameter describing plant drought tolerance). However, such effects depended on the physio-chemical properties of the leaf surface. In comparison to kohlrabi, the adjuvant effects on gmin of apple leaves were relatively weak. The increase of gmin was associated with a decrease in contact angle and with an alteration of the wax microstructure. Furthermore, POEA affected photochemical efficiency of kohlrabi leaves. Some adjuvants could have a temporal influence on transpirational water loss and gmin. At repeated applications, they might alter the effective water use and possibly reduce drought tolerance of some horticultural crops.


Asunto(s)
Agricultura , Brassica/fisiología , Malus/fisiología , Fotosíntesis/efectos de los fármacos , Hojas de la Planta/fisiología , Transpiración de Plantas/efectos de los fármacos , Tensoactivos/farmacología , Brassica/efectos de los fármacos , Fluorescencia , Malus/efectos de los fármacos , Epidermis de la Planta/ultraestructura , Hojas de la Planta/efectos de los fármacos , Hojas de la Planta/ultraestructura , Factores de Tiempo , Agua , Ceras/metabolismo
13.
Beilstein J Nanotechnol ; 8: 1671-1679, 2017.
Artículo en Inglés | MEDLINE | ID: mdl-28875104

RESUMEN

Underwater air retention of superhydrophobic hierarchically structured surfaces is of increasing interest for technical applications. Persistent air layers (the Salvinia effect) are known from biological species, for example, the floating fern Salvinia or the backswimmer Notonecta. The use of this concept opens up new possibilities for biomimetic technical applications in the fields of drag reduction, antifouling, anticorrosion and under water sensing. Current knowledge regarding the shape of the air-water interface is insufficient, although it plays a crucial role with regards to stability in terms of diffusion and dynamic conditions. Optical methods for imaging the interface have been limited to the micrometer regime. In this work, we utilized a nondynamic and nondestructive atomic force microscopy (AFM) method to image the interface of submerged superhydrophobic structures with nanometer resolution. Up to now, only the interfaces of nanobubbles (acting almost like solids) have been characterized by AFM at these dimensions. In this study, we show for the first time that it is possible to image the air-water interface of submerged hierarchically structured (micro-pillars) surfaces by AFM in contact mode. By scanning with zero resulting force applied, we were able to determine the shape of the interface and thereby the depth of the water penetrating into the underlying structures. This approach is complemented by a second method: the interface was scanned with different applied force loads and the height for zero force was determined by linear regression. These methods open new possibilities for the investigation of air-retaining surfaces, specifically in terms of measuring contact area and in comparing different coatings, and thus will lead to the development of new applications.

14.
Nanomicro Lett ; 9(2): 23, 2017.
Artículo en Inglés | MEDLINE | ID: mdl-30464998

RESUMEN

An overview of plant surface structures and their evolution is presented. It combines surface chemistry and architecture with their functions and refers to possible biomimetic applications. Within some 3.5 billion years biological species evolved highly complex multifunctional surfaces for interacting with their environments: some 10 million living prototypes (i.e., estimated number of existing plants and animals) for engineers. The complexity of the hierarchical structures and their functionality in biological organisms surpasses all abiotic natural surfaces: even superhydrophobicity is restricted in nature to living organisms and was probably a key evolutionary step with the invasion of terrestrial habitats some 350-450 million years ago in plants and insects. Special attention should be paid to the fact that global environmental change implies a dramatic loss of species and with it the biological role models. Plants, the dominating group of organisms on our planet, are sessile organisms with large multifunctional surfaces and thus exhibit particular intriguing features. Superhydrophilicity and superhydrophobicity are focal points in this work. We estimate that superhydrophobic plant leaves (e.g., grasses) comprise in total an area of around 250 million km2, which is about 50% of the total surface of our planet. A survey of structures and functions based on own examinations of almost 20,000 species is provided, for further references we refer to Barthlott et al. (Philos. Trans. R. Soc. A 374: 20160191, 1). A basic difference exists between aquatic non-vascular and land-living vascular plants; the latter exhibit a particular intriguing surface chemistry and architecture. The diversity of features is described in detail according to their hierarchical structural order. The first underlying and essential feature is the polymer cuticle superimposed by epicuticular wax and the curvature of single cells up to complex multicellular structures. A descriptive terminology for this diversity is provided. Simplified, the functions of plant surface characteristics may be grouped into six categories: (1) mechanical properties, (2) influence on reflection and absorption of spectral radiation, (3) reduction of water loss or increase of water uptake, moisture harvesting, (4) adhesion and non-adhesion (lotus effect, insect trapping), (5) drag and turbulence increase, or (6) air retention under water for drag reduction or gas exchange (Salvinia effect). This list is far from complete. A short overview of the history of bionics and the impressive spectrum of existing and anticipated biomimetic applications are provided. The major challenge for engineers and materials scientists, the durability of the fragile nanocoatings, is also discussed.

15.
Bioinspir Biomim ; 11(5): 056003, 2016 08 16.
Artículo en Inglés | MEDLINE | ID: mdl-27529805

RESUMEN

The cleanup of accidental oil spills in water is an enormous challenge; conventional oil sorbents absorb large amounts of water in addition to oil and other cleanup methods can cause secondary pollution. In contrast, fresh leaves of the aquatic ferns Salvinia are superhydrophobic and superoleophilic, and can selectively absorb oil while repelling water. These selective wetting properties are optimal for natural oil absorbent applications and bioinspired oil sorbent materials. In this paper we quantify the oil absorption capacity of four Salvinia species with different surface structures, water lettuce (Pistia stratiotes) and Lotus leaves (Nelumbo nucifera), and compare their absorption capacity to artificial oil sorbents. Interestingly, the oil absorption capacities of Salvinia molesta and Pistia stratiotes leaves are comparable to artificial oil sorbents. Therefore, these pantropical invasive plants, often considered pests, qualify as environmentally friendly materials for oil spill cleanup. Furthermore, we investigated the influence of oil density and viscosity on the oil absorption, and examine how the presence and morphology of trichomes affect the amount of oil absorbed by their surfaces. Specifically, the influence of hair length and shape is analyzed by comparing different hair types ranging from single trichomes of Salvinia cucullata to complex eggbeater-shaped trichomes of Salvinia molesta to establish a basis for improving artificial bioinspired oil absorbents.


Asunto(s)
Organismos Acuáticos/ultraestructura , Restauración y Remediación Ambiental/métodos , Helechos/ultraestructura , Interacciones Hidrofóbicas e Hidrofílicas , Contaminación por Petróleo , Hojas de la Planta/ultraestructura , Contaminación del Agua , Araceae/ultraestructura , Nelumbo/ultraestructura , Hojas de la Planta/química , Viscosidad , Agua
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA