Progress in Dental Adhesive Materials.

There have been significant advances in adhesive dentistry in recent decades, with efforts being made to improve the mechanical and bonding properties of resin-based dental adhesive materials. Various attempts have been made to achieve versatility, introducing functional monomers and silanes into the materials' composition to enable the chemical reaction with tooth structure and restorative materials and a multimode use. The novel adhesive materials also tend to be simpler in terms of clinical use, requiring reduced number of steps, making them less technique sensitive. However, these materials must also be reliable and have a long-lasting bond with different substrates. In order to fulfill these arduous tasks, different chemical constituents and different techniques are continuously being developed and introduced into dental adhesive materials. This critical review aims to discuss the concepts behind novel monomers, bioactive molecules, and alternative techniques recently implemented in adhesive dentistry. Incorporating monomers that are more resistant to hydrolytic degradation and functional monomers that enhance the micromechanical retention and improve chemical interactions between adhesive resin materials and various substrates improved the performance of adhesive materials. The current trend is to blend bioactive molecules into adhesive materials to enhance the mechanical properties and prevent endogenous enzymatic degradation of the dental substrate, thus ensuring the longevity of resin-dentin bonds. Moreover, alternative etching materials and techniques have been developed to address the drawbacks of phosphoric acid dentin etching. Altogether, we are witnessing a dynamic era in adhesive dentistry, with advancements aiming to bring us closer to simple and reliable bonding. However, simplification and novelty should not be achieved at the expense of material properties.

Dentin Cross-linking Effect of Carbodiimide After 5 Years.

Carbodiimide (EDC)-based dentin primers preserve hybrid layer (HL) integrity. However, aging >1 y has not been investigated. The present study examined whether the cross-linking effect of EDC was reflected in dentin bond strength, endogenous enzymatic activity, and the chemical profile of the HL after 5-y aging in artificial saliva. Noncarious human third molars (N = 42) were cut to expose middle/deep coronal dentin and treated as follows: group 1, dentin etched with 35% H3PO4, pretreated with a 0.3M aqueous EDC primer for 1 min and restored with XP Bond (Dentsply Sirona); group 2, as in group 1 but without EDC pretreatment; group 3, Clearfil SE Bond (Kuraray-Noritake) primer applied to dentin surface, followed by EDC pretreatment as in group 1 and application of bond; group 4, as in group 3 without EDC pretreatment. After composite buildup, the specimens were cut into sticks or slabs, depending on the experiment. All tests were performed at baseline (T0) and after 5 y of aging (T5) in artificial saliva at 37 °C. Microtensile bond strength (µTBS) was tested at a crosshead speed of 1 mm/min until failure. Endogenous enzymatic activity was investigated with in situ zymography. The chemical profile of HL was determined via Raman spectroscopy. Three-way analysis of variance and post hoc Tukey test were used to analyze µTBS and in situ zymography data (α = 0.05). EDC pretreatment and aging significantly influenced µTBS and in situ zymography results (P < 0.05). Higher bond strength and lower gelatinolytic activity were identified in the EDC-treated groups at T5 (P < 0.05), especially in the etch-and-rinse groups. Raman spectra revealed less defined amide III peaks in control specimens at T5. The EDC cross-linking effect persisted in the HL for 5 y in terms of bond strength, collagen structure preservation, and dentinal enzyme silencing.

Substantivity of Carbodiimide Inhibition on Dentinal Enzyme Activity over Time.

The use of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide HCl (EDC) has recently been investigated for its effectiveness in the prevention of collagen degradation over time and the improvement of resin-dentin bond durability. The objective of the present study was to evaluate the effects of a 0.3 M EDC-containing conditioner on endogenous enzymatic activities within the hybrid layer (HL) created by a self-etch or an etch-and-rinse adhesive after 1 y. The activity within the HL was examined using in situ zymography and confocal laser scanning microscopy after 24 h or 1-y storage in artificial saliva. Dentin specimens were bonded with Clearfil SE Bond (CSE) or XP Bond (XPB). For CSE, the self-etching primer was applied and treated with 0.3 M EDC for 1 min, and then the bonding agent was applied. For XPB, dentin was etched and treated with 0.3 M EDC for 1 min and then bonded with the primer-bonding agent. Control specimens were prepared without EDC treatment. Slices containing the adhesive-dentin interface were covered with fluorescein-conjugated gelatin and observed with a multiphoton confocal microscope. Fluorescence intensity emitted by hydrolyzed fluorescein-conjugated gelatin was quantified, and the amount of gelatinolytic activity was represented by the percentage of green fluorescence emitted within the HL. After 24 h of storage, enzymatic activity was detected by in situ zymography within the HLs of both tested adhesives, with XPB higher than CSE ( P < 0.05). Almost no fluorescence signal was detected when specimens were pretreated with EDC compared to controls ( P < 0.05). After 1 y of storage, enzymatic activities significantly increased for all groups (excluding XPB control) compared to 24-h storage ( P < 0.05), with EDC pretreated specimens exhibiting significantly lower activity than controls ( P < 0.05). The present study showed, for the first time, that the use of EDC for both the self-etch and the etch-and-rinse approaches results in the reduction but not complete inhibition of matrix-bound collagenolytic enzyme activities over time in the HL.