Semiconductor wires and ribbons for high-performance flexible electronics.

This article reviews the properties, fabrication and assembly of inorganic semiconductor materials that can be used as active building blocks to form high-performance transistors and circuits for flexible and bendable large-area electronics. Obtaining high performance on low temperature polymeric substrates represents a technical challenge for macroelectronics. Therefore, the fabrication of high quality inorganic materials in the form of wires, ribbons, membranes, sheets, and bars formed by bottom-up and top-down approaches, and the assembly strategies used to deposit these thin films onto plastic substrates will be emphasized. Substantial progress has been made in creating inorganic semiconducting materials that are stretchable and bendable, and the description of the mechanics of these form factors will be presented, including circuits in three-dimensional layouts. Finally, future directions and promising areas of research will be described.

Competing fracture in kinetically controlled transfer printing.

Transfer printing by kinetically switchable adhesion to an elastomeric stamp shows promise as a powerful micromanufacturing method to pickup microstructures and microdevices from the donor substrate and to print them to the receiving substrate. This can be viewed as the competing fracture of two interfaces. This paper examines the mechanics of competing fracture in a model transfer printing system composed of three laminates: an elastic substrate, an elastic thin film, and a viscoelastic member (stamp). As the system is peeled apart, either the interface between the substrate and thin film fails or the interface between the thin film and the stamp fails. The speed-dependent nature of the film/stamp interface leads to the prediction of a critical separation velocity above which separation occurs between the film and the substrate (i.e., pickup) and below which separation occurs between the film and the stamp (i.e., printing). Experiments verify this prediction using films of gold adhered to glass, and the theoretical treatment extends to consider the competing fracture as it applies to discrete micro-objects. Temperature plays an important role in kinetically controlled transfer printing with its influences, making it advantageous to pickup printable objects at the reduced temperatures and to print them at the elevated ones.

Printed multilayer superstructures of aligned single-walled carbon nanotubes for electronic applications.

We developed means to form multilayer superstructures of large collections of single-walled carbon nanotubes (SWNTs) configured in horizontally aligned arrays, random networks, and complex geometries of arrays and networks on a wide range of substrates. The approach involves guided growth of SWNTs on crystalline and amorphous substrates followed by sequential, multiple step transfer of the resulting collections of tubes to target substrates, such as high-k thin dielectrics on silicon wafers, transparent plates of glass, cylindrical tubes and other curved surfaces, and thin, flexible sheets of plastic. Electrical measurements on dense, bilayer superstructures, including crossbars, random networks, and aligned arrays on networks of SWNTs reveal some important characteristics of representative systems. These and other layouts of SWNTs might find applications not only in electronics but also in areas such as optoelectronics, sensors, nanomechanical systems, and microfluidics.

Guided growth of large-scale, horizontally aligned arrays of single-walled carbon nanotubes and their use in thin-film transistors.

A convenient process for generating large-scale, horizontally aligned arrays of pristine, single-walled carbon nanotubes (SWNTs) is described. The approach uses guided growth, by chemical vapor deposition (CVD), of SWNTs on miscut single-crystal quartz substrates. Studies of the growth reveal important relationships between the density and alignment of the tubes, the CVD conditions, and the morphology of the quartz. Electrodes and dielectrics patterned on top of these arrays yield thin-film transistors that use the SWNTs as effective thin-film semiconductors. The ability to build high-performance devices of this type suggests significant promise for large-scale aligned arrays of SWNTs in electronics, sensors, and other applications.