Carbon Fiber-Mediated Electrospinning Scaffolds Can Conduct Electricity for Repairing Defective Tendon.

Partial or complete rupture of the tendon can damage the collagen structure, resulting in the disruption of the electrical signal pathway. It is a great challenge to reconstruct the original electrical signal pathway of the tendon and promote the regeneration and functional recovery of defective tendon. In this study, carbon fiber-mediated electrospinning scaffolds were fabricated by wrapping conductive, high-strength, loose single-bundle carbon fibers with nanofiber membranes. Due to the presence of nanofiber membranes, the maximum tensile force of the scaffolds was 2.4 times higher than that of carbon fibers, while providing excellent temporal and spatial prerequisites for tenocytes to adapt to electrical stimulation to accelerate proliferation and expression. The diameter of the carbon fiber monofilaments used in this study was 5.07 ± 1.20 µm, which matched the diameter of tendon collagen, allowing for quickly establishing the connection between the tendon tissue and the scaffold, and better promoting the recovery of the electrical signal pathway. In a rabbit Achilles tendon defect repair model, the carbon fiber-mediated electrospinning scaffold was almost filled with collagen fibers compared to a nonconductive polyethylene glycol terephthalate scaffold. Transcriptome sequencing revealed that fibromodulin and tenomodulin expression were upregulated, and their related proteoglycans and glycosaminoglycan binding proteins pathways were enhanced, which could regulate the TGF-ß signaling pathway and optimize the extracellular matrix assembly, thus promoting tendon repair. Therefore, the scaffold in this study makes up for the shortage of conductive scaffolds for repairing tendon defects, revealing the potential impact of conductivity on the signaling pathway of tendon repair and providing a new approach for future clinical studies.

Temperature-responsive self-contraction nanofiber/hydrogel composite dressing facilitates the healing of diabetic-infected wounds.

Bacterial infections and long-term inflammation cause serious secondary damage to chronic diabetic wounds and hinder the wound healing processes. Currently, multifunctional hydrogels have shown promising effects in chronic wound repair. However, traditional hydrogels only keep the wound moist and protect it from bacterial infection, and cannot provide mechanical force to contract the wound edges to achieve facilitated wound closure. Here, an asymmetric composite dressing was created by combining biaxially oriented nanofibers and hydrogel, inspired by the double-layer structure of the traditional Chinese medicinal plaster patch, for managing chronic wounds. Specifically, electrospun Poly-(lactic acid-co-trimethylene carbonate) (PLATMC) nanofibers and methacrylate gelatin (GelMa) hydrogel loaded with Epinecidin-1@chitosan (Epi-1@CS) nanoparticles are assembled as the temperature-responsive self-contracting nanofiber/hydrogel (TSNH) composite dressing. The substrate layer of PLATMC nanofibers combines topological morphology with material properties to drive wound closure through temperature-triggered contraction force. The functional layer of GelMa hydrogel is loaded with Epi-1@CS nanoparticles that combine satisfactory cytocompatibility, and antioxidant, anti-inflammatory, and antibacterial properties. Strikingly, in vivo, the TSNH dressing could regulate the diabetic wound microenvironment, thereby promoting collagen deposition, facilitating angiogenesis, and reducing the inflammatory response, which promotes the rapid healing of chronic wounds. This study highlights the potential of synergizing mechanical and biochemical signals in enhancing chronic wound treatment. Overall, this TSNH composite dressing is provided as a reliable approach to solving the long-standing problem of chronically infected wound healing.

Electroacupuncture and methotrexate cooperate to ameliorate psoriasiform skin inflammation by regulating the immune balance of Th17/Treg.

Psoriasis is an autoinflammatory dermatosis, while methotrexate (MTX) is an immunosuppressant used to treat psoriasis. However, conventional immunosuppressants may cause various side effects. Acupuncture has potential benefits in treating psoriasis based on its anti-inflammatory effects. However, the immune mechanisms underlying its effects remain unclear. In this study, imiquimod-induced psoriatic mice were used to investigate the effects and mechanisms of electroacupuncture (EA) and, in particular, its joint treatment with MTX. We found that treatment with either EA or MTX ameliorated psoriasiform skin lesions, improved skin pathology and reduced proinflammatory cytokines in the skin, while joint treatment with both EA and MTX further alleviated the skin lesions and inflammation compared to either one alone. Moreover, percentages of CD4+ IL-17A+ Th17 cells in the skin and lymph nodes were decreased by EA or MTX and further lowered by combined EA+MTX treatment. Similarly, EA or MTX also reduced their RORγt expression. On the contrary, CD4+ FoxP3+ Treg frequency in psoriatic mice was augmented by EA or MTX and further increased by the joint treatment. However, depleting Tregs mostly reversed the therapeutic effects of EA or EA plus MTX. Additionally, the phosphorylated NF-κB (p65) expression was suppressed by treatment with EA, MTX or better with EA+MTX. Meanwhile, the anti-inflammatory effects of EA plus MTX were offset by an NF-κB agonist. Thus, this study has revealed that EA cooperates with MTX to balance Th17/Treg responses and to ameliorate psoriasiform skin inflammation through suppressing NF-κB activation. Our findings may be implicated for treating human psoriasis.

3D-Printed Stents Loaded with Panax notoginseng Saponin for Promoting Re-endothelialization and Reducing Local Inflammation in the Carotid Artery of Rabbits.

Endovascular treatment (EVT) using stents has become the primary option for severe cerebrovascular stenosis. However, considerable challenges remain to be addressed, such as in-stent restenosis (ISR) and late thrombosis. Many modified stents have been developed to inhibit the hyperproliferation of vascular smooth muscle cells (SMCs) and protect vascular endothelial cells (VECs), thereby reducing such complications. Some modified stents, such as those infused with rapamycin, have improved in preventing acute thrombosis. However, ISR and late thrombosis, which are long-term complications, remain unavoidable. Panax notoginseng saponin (PNS), a traditional Chinese medicine consisting of various compounds, is beneficial in promoting the proliferation and migration of VECs and inhibiting the proliferation of SMCs. Herein, a 3D-printed polycaprolactone (PCL) stent loaded with PNS (PNS-PCL stent) was developed based on a previous study. In vitro studies confirmed that PNS promotes the migration and proliferation of VECs, which were damaged, by increasing the expression levels of microRNA-126, p-AKT, and endothelial nitric oxide synthase. In vivo, the PNS-PCL stents maintained the patency of the carotid artery in rabbits for up to three months, outperforming the PCL stents. The PNS-PCL stents may present a new solution for the EVT of cerebrovascular atherosclerotic stenosis in the future.

Host vegetation connectivity is decisive for the natural spread of pine wilt disease.

BACKGROUND: Pine wilt disease has caused significant economic, ecological, and social losses in China, but there is a notable lack of research on the dynamic process of its propagation and diffusion over long timescales. This study revealed the spatial and temporal spread of the natural invasion of pine wilt disease through an analysis of long time series at macroscopic scales. We analysed and verified by simulations the driving mechanisms of host and wind fields in the natural spread of pine wilt disease. RESULTS: The research findings indicate that from 1982 to 2019, the number of counties affected by pine wilt disease in the Yangtze River Delta region of China exhibited a pattern of 'steady increase-fluctuation-outbreak'. The host forest played a decisive role in the natural spread of the disease, while the wind field played a supporting role. The study revealed specific contributions from various factors, where host forest landscape connectivity, host forest area share, mean wind speed, and wind frequency accounted for 31.8%, 28.7%, 22.6%, and 8.8%, respectively. The interaction of increased host forest area and increased wind speed can significantly increase the risk of pine wilt disease transmission. To validate these findings, vectorial metacellular automata simulations of pine nematode transmission in the Yangtze River Delta were conducted, yielding results with an accuracy of 0.803. CONCLUSION: By quantifying the contribution of host forest connectivity to the natural spread of pine wilt disease, this research offers a scientific foundation and innovative insights for preventing and controlling its dissemination. © 2024 Society of Chemical Industry.

A novel antibiotic: the antimicrobial effects of CFBSA and its application on electronspun wound dressing.

N-chloro-N-fluorobenzenesulfonylamide (CFBSA), was a novel chlorinating reagent, which exhibits potential antibacterial activities. In this study, CFBSA was confirmed as a wide-broad antimicrobial and bactericidal drug against different gram-negative bacteria, gram-positive bacteria and fungi, while it was found to have low cytotoxicity for eukaryotic cells. In addition, microorganism morphology assay and oxidative stress test was used to determine the antimicrobial mechanisms of CFBSA. According to the results, CFBSA probably had a target on cell membrane and killed microorganism by disrupting its cell membrane. Then, CFBSA was first combined with poly(L-lactide-co-caprolactone) (PLCL)/SF via electrospinning and applied in wound dressings. The characterization of different PLCL/SF of CFBSA-loaded nanofibrous mats was investigated by SEM, water contact angle, Fourier transform infrared spectroscopy, cell compatibility and antimicrobial test. CFBSA-loaded PLCL/SF nanofibrous mats showed excellent antimicrobial activities. In order to balance of the biocompatibility and antibacterial efficiency, SP-2.5 was selected as the ideal loading concentration for further application of CFBSA-loaded PLCL/SF. In conclusion, the electrospun CFBSA-loaded PLCL/SF nanofibrous mat with its broad-spectrum antimicrobial and bactericidal activity and good biocompatibility showed enormous potential for wound dressing.

Composite superplastic aerogel scaffolds containing dopamine and bioactive glass-based fibers for skin and bone tissue regeneration.

Multifunctional bioactive biomaterials with integrated bone and soft tissue regenerability hold great promise for the regeneration of trauma-affected skin and bone defects. The aim of this research was to fabricate aerogel scaffolds (GD-BF) by blending the appropriate proportions of short bioactive glass fiber (BGF), gelatin (Gel), and dopamine (DA). Electrospun polyvinyl pyrrolidone (PVP)-BGF fibers were converted into short BGF through calcination and homogenization. Microporous GD-BF scaffolds displayed good elastic deformation recovery and promoted neo-tissue formation. The DA could enable thermal crosslinking and enhance the mechanical properties and structural stability of the GD-BF scaffolds. The BGF-mediated release of therapeutic ions shorten hemostatic time (<30 s) in a rat tail amputation model and a rabbit artery injury model alongside inducing the regeneration of skin appendages (e.g., blood vessels, glands, etc.) in a full-thickness excisional defect model in rats (percentage wound closure: GD-BF2, 98 % vs. control group, 83 %) at day 14 in vitro. Taken together, these aerogel scaffolds may have significant promise for soft and hard tissue repair, which may also be worthy for the other related disciplines.

Composite Aerogel Scaffolds Containing Flexible Silica Nanofiber and Tricalcium Phosphate Enable Skin Regeneration.

Poor hemostatic ability and less vascularization at the injury site could hinder wound healing as well as adversely affect the quality of life (QOL). An ideal wound dressing should exhibit certain characteristics: (a) good hemostatic ability, (b) rapid wound healing, and (c) skin appendage formation. This necessitates the advent of innovative dressings to facilitate skin regeneration. Therapeutic ions, such as silicon ions (Si4+) and calcium ions (Ca2+), have been shown to assist in wound repair. The Si4+ released from silica (SiO2) can upregulate the expression of proteins, including the vascular endothelial growth factor (VEGF) and alpha smooth muscle actin (α-SMA), which is conducive to vascularization; Ca2+ released from tricalcium phosphate (TCP) can promote the coagulation alongside upregulating the expression of cell migration and cell differentiation related proteins, thereby facilitating the wound repair. The overarching objective of this study was to exploit short SiO2 nanofibers along with the TCP to prepare TCPx@SSF aerogels and assess their wound healing ability. Short SiO2 nanofibers were prepared by electrospinning and blended with varying proportions of TCP to afford TCPx@SSF aerogel scaffolds. The TCPx@SSF aerogels exhibited good cytocompatibility in a subcutaneous implantation model and manifested a rapid hemostatic effect (hemostatic time 75 s) in a liver trauma model in the rabbit. These aerogel scaffolds also promoted skin regeneration and exhibited rapid wound closure, epithelial tissue regeneration, and collagen deposition. Taken together, TCPx@SSF aerogels may be valuable for wound healing.

Shape-Persistent Conductive Nerve Guidance Conduits for Peripheral Nerve Regeneration.

To solve the problems of slow regeneration and mismatch of axon regeneration after peripheral nerve injury, nerve guidance conduits (NGCs) have been widely used to promote nerve regeneration. Multichannel NGCs have been widely studied to mimic the structure of natural nerve bundles. However, multichannel conduits are prone to structural instability. Thermo-responsive shape memory polymers (SMPs) can maintain a persistent initial structure over the body temperature range. Electrical stimulation (ES), utilized within nerve NGCs, serves as a biological signal to expedite damaged nerve regeneration. Here, an electrospun shape-persistent conductive NGC is designed to maintain the persistent tubular structure in the physiological temperature range and improve the conductivity. The physicochemical and biocompatibility of these P, P/G, P/G-GO, and P/G-RGO NGCs are conducted in vitro. Meanwhile, to evaluate biocompatibility and peripheral nerve regeneration, NGCs are implanted in subcutaneous parts of the back of rats and sciatic nerves assessed by histology and immunofluorescence analyses. The conductive NGC displays a stable structure, good biocompatibility, and promoted nerve regeneration. Collectively, the shape-persistent conductive NGC (P/G-RGO) is expected to promote peripheral nerve recovery, especially for long-gap and large-diameter nerves.

Multi-omics analyses reveal interactions between the skin microbiota and skin metabolites in atopic dermatitis.

Introduction: Atopic dermatitis (AD) is one of the most common inflammatory skin diseases. Skin microecological imbalance is an important factor in the pathogenesis of AD, but the underlying mechanism of its interaction with humans remains unclear. Methods: 16S rRNA gene sequencing was conducted to reveal the skin microbiota dynamics. Changes in skin metabolites were tracked by LC-MS metabolomics. We then explored the potential mechanism of interaction by analyzing the correlation between skin bacterial communities and metabolites in corresponding skin-associated samples. Results: Samples from 18 AD patients and 18 healthy volunteers (HVs) were subjected to 16S rRNA gene sequencing and LC-MS metabolomics. AD patients had dysbiosis of the skin bacterial community with decreased species richness and evenness. The relative abundance of the genus Staphylococcus increased significantly in AD, while the abundances of the genera Propionibacterium and Brevundimonas decreased significantly. The relative abundance of the genera Staphylococcus in healthy females was significantly higher than those in healthy males, while it showed no difference in AD patients with or without lesions. The effects of AD status, sex and the presence or absence of rashes on the number of differentially abundant metabolites per capita were successively reduced. Multiple metabolites involved in purine metabolism and phenylalanine metabolism pathways (such as xanthosine/xanthine and L-phenylalanine/trans-cinnamate) were increased in AD patients. These trends were much more obvious between female AD patients and female HVs. Spearman correlation analysis revealed that the genus Staphylococcus was positively correlated with various compounds involved in phenylalanine metabolism and purine metabolic pathways. The genera Brevundimonas and Lactobacillus were negatively correlated with various compounds involved in purine metabolism, phenylalanine metabolism and sphingolipid signaling pathways. Discussion: We suggest that purine metabolism and phenylalanine metabolism pathway disorders may play a certain role in the pathogenic mechanism of Staphylococcus aureus in AD. We also found that females are more likely to be colonized by the genus Staphylococcus than males. Differentially abundant metabolites involved in purine metabolism and phenylalanine metabolism pathways were more obvious in female. However, we should notice that the metabolites we detected do not necessarily derived from microbes, they may also origin from the host.

Methacrylated gelatin and platelet-rich plasma based hydrogels promote regeneration of critical-sized bone defects.

Physiological repair of large-sized bone defects requires instructive scaffolds with appropriate mechanical properties, biocompatibility, biodegradability, vasculogenic ability and osteo-inductivity. The objective of this study was to fabricate in situ injectable hydrogels using platelet-rich plasma (PRP)-loaded gelatin methacrylate (GM) and employ them for the regeneration of large-sized bone defects. We performed various biological assays as well as assessed the mechanical properties of GM@PRP hydrogels alongside evaluating the release kinetics of growth factors (GFs) from hydrogels. The GM@PRP hydrogels manifested sufficient mechanical properties to support the filling of the tissue defects. For biofunction assay, the GM@PRP hydrogels significantly improved cell migration and angiogenesis. Especially, transcriptome RNA sequencing of human umbilical vein endothelial cells and bone marrow-derived stem cells were performed to delineate vascularization and biomineralization abilities of GM@PRP hydrogels. The GM@PRP hydrogels were subcutaneously implanted in rats for up to 4 weeks for preliminary biocompatibility followed by their transplantation into a tibial defect model for up to 8 weeks in rats. Tibial defects treated with GM@PRP hydrogels manifested significant bone regeneration as well as angiogenesis, biomineralization, and collagen deposition. Based on the biocompatibility and biological function of GM@PRP hydrogels, a new strategy is provided for the regenerative repair of large-size bone defects.

Development of 3D printed electrospun vascular graft loaded with tetramethylpyrazine for reducing thrombosis and restraining aneurysmal dilatation.

Background: Small-diameter vascular grafts have become the focus of attention in tissue engineering. Thrombosis and aneurysmal dilatation are the two major complications of the loss of vascular access after surgery. Therefore, we focused on fabricating 3D printed electrospun vascular grafts loaded with tetramethylpyrazine (TMP) to overcome these limitations. Methods: Based on electrospinning and 3D printing, 3D-printed electrospun vascular grafts loaded with TMP were fabricated. The inner layer of the graft was composed of electrospun poly(L-lactic-co-caprolactone) (PLCL) nanofibers and the outer layer consisted of 3D printed polycaprolactone (PCL) microfibers. The characterization and mechanical properties were tested. The blood compatibility and in vitro cytocompatibility of the grafts were also evaluated. Additionally, rat abdominal aortas were replaced with these 3D-printed electrospun grafts to evaluate their biosafety. Results: Mechanical tests demonstrated that the addition of PCL microfibers could improve the mechanical properties. In vitro experimental data proved that the introduction of TMP effectively inhibited platelet adhesion. Afterwards, rat abdominal aorta was replaced with 3D-printed electrospun grafts. The 3D-printed electrospun graft loaded with TMP showed good biocompatibility and mechanical strength within 6 months and maintained substantial patency without the occurrence of acute thrombosis. Moreover, no obvious aneurysmal dilatation was observed. Conclusions: The study demonstrated that 3D-printed electrospun vascular grafts loaded with TMP may have the potential for injured vascular healing.

Aspirin-Loaded Anti-Inflammatory ZnO-SiO2 Aerogel Scaffolds for Bone Regeneration.

The increasing aging of the population has elevated bone defects to a significant threat to human life and health. Aerogel, a biomimetic material similar to an extracellular matrix (ECM), is considered an effective material for the treatment of bone defects. However, most aerogel scaffolds suffer from immune rejection and poor anti-inflammatory properties and are not well suited for human bone growth. In this study, we used electrospinning to prepare flexible ZnO-SiO2 nanofibers with different zinc concentrations and further assembled them into three-dimensional composite aerogel scaffolds. The prepared scaffolds exhibited an ordered pore structure, and chitosan (CS) was utilized as a cross-linking agent with aspirin (ASA). Interestingly, the 1%ZnO-SiO2/CS@ASA scaffolds not only exhibited good biocompatibility, bioactivity, anti-inflammation, and better mechanical properties but also significantly promoted vascularization and osteoblast differentiation in vitro. In the mouse cranial defect model, the BV/TV data showed a higher osteogenesis rate in the 1%ZnO-SiO2/CS group (10.94 ± 0.68%) and the 1%ZnO-SiO2/CS@ASA group (22.76 ± 1.83%), compared with the control group (5.59 ± 2.08%), and in vivo studies confirmed the ability of 1%ZnO-SiO2/CS@ASA to promote in situ regeneration of new bone. This may be attributed to the fact that Si4+, Zn2+, and ASA released from 1%ZnO-SiO2/CS@ASA scaffolds can promote angiogenesis and bone formation by stimulating the interaction between endothelial cells (ECs) and BMSCs, as well as inducing macrophage differentiation to the M2 type and downregulating the expression of pro-inflammatory factor (TNF-α) to modulate local inflammatory response. These exciting results and evidence suggest that it provides a new and effective strategy for the treatment of bone defects.

Development of 3D Printed Biodegradable, Entirely X-ray Visible Stents for Rabbit Carotid Artery Implantation.

Biodegradable stents are considered a promising strategy for the endovascular treatment of cerebrovascular diseases. The visualization of biodegradable stents is of significance during the implantation and long-term follow-up. Endowing biodegradable stents with X-ray radiopacity can overcome the weakness of intrinsic radioparency of polymers. Hence, this work focuses on the development of an entirely X-ray visible biodegradable stent (PCL-KIO3) composed of polycaprolactone (PCL) and potassium iodate via physical blending and 3D printing. The in vitro results show that the introduction of potassium iodate makes the 3D-printed PCL stents visualizable under X-ray. So far, there is inadequate study about polymeric stent visualization in vivo. Therefore, PCL-KIO3 stents are implanted into the rabbit carotid artery to evaluate the biosafety and visibility performance. During stent deployment, the visualization of the PCL-KIO3 stent effectively helps to understand the position and dilation status of stents. At 6-month follow-up, the PCL-KIO3 stent could still be observed under X-ray and maintains excellent vessel patency. To sum up, this study demonstrates that PCL-KIO3 stent may provide a robust strategy for biodegradable stent visualization.

Fiber configuration determines foreign body response of electrospun scaffolds:in vitroandin vivoassessments.

Biomaterial scaffolds boost tissue repair and regeneration by providing physical support, delivering biological signals and/or cells, and recruiting endogenous cells to facilitate tissue-material integration and remodeling. Foreign body response (FBR), an innate immune response that occurs immediately after biomaterial implantation, is a critical factor in determining the biological outcomes of biomaterial scaffolds. Electrospinning is of great simplicity and cost-effectiveness to produce nanofiber scaffolds with well-defined physicochemical properties and has been used in a variety of regenerative medicine applications in preclinical trials and clinical practice. A deep understanding of causal factors between material properties and FBR of host tissues is beneficial to the optimal design of electrospun scaffolds with favorable immunomodulatory properties. We herein prepared and characterized three electrospun scaffolds with distinct fiber configurations and investigated their effects on FBR in terms of immune cell-material interactions and host responses. Our results show that electrospun yarn scaffold results in greater cellular immune reactions and elevated FBR inin vivoassessments. Although the yarn scaffold showed aligned fiber bundles, it failed to induce cell elongation of macrophages due to its rough surface and porous grooves between yarns. In contrast, the aligned scaffold showed reduced FBR compared to the yarn scaffold, indicating a smooth surface is also a contributor to the immunomodulatory effects of the aligned scaffold. Our study suggests that balanced porousness and smooth surface of aligned fibers or yarns should be the key design parameters of electrospun scaffolds to modulate host responsein vivo.

Electrospun membranes chelated by metal magnesium ions enhance pro-angiogenic activity and promote diabetic wound healing.

Diabetic wounds, resulting from skin atrophy due to localized ischemia and hypoxia in diabetic patients, lead to chronic pathological inflammation and delayed healing. Using electrospinning technology, we developed magnesium ion-chelated nanofiber membranes to explore their efficacy in antibacterial, anti-inflammatory, and angiogenic applications for wound healing. These membranes are flexible and elastic, resembling native skin tissue, and possess good hydrophilicity for comfortable wound bed contact. The mechanical properties of nanofiber membranes are enhanced by the chelation of magnesium ions (Mg2+), which also facilitates a long-term slow release of Mg2+. The cytocompatibility of the nanofibrous membranes is influenced by their Mg2+ content: lower levels encourage the proliferation of fibroblasts, endothelial cells, and macrophages, while higher levels are inhibitory. In a diabetic rat model, magnesium ion-chelated nanofibrous membranes effectively reduced early wound inflammation and notably accelerated wound healing. This study highlights the potential of magnesium ion-chelated nanofiber membranes in treating diabetic wounds.

Ibuprofen-loaded bilayer electrospun mesh modulates host response toward promoting full-thickness abdominal wall defect repair.

Pro-inflammatory response impairs the constructive repair of abdominal wall defects after mesh implantation. Electrospinning-aid functionalization has the potential to improve the highly orchestrated response by attenuating the over-activation of foreign body reactions. Herein, we combined poly(L-lactic acid-co-caprolactone) (PLLA-CL) with gelatin proportionally via electrospinning, with Ibuprofen (IBU) incorporation to fabricate a bilayer mesh for the repair improvement. The PLLA-CL/gelatin/IBU (PGI) mesh was characterized in vitro and implanted into the rat model with a full-thickness defect for a comprehensive evaluation in comparison to the PLLA-CL/gelatin (PG) and off-the-shelf small intestinal submucosa (SIS) meshes. The bilayer PGI mesh presented a sustained release of IBU over 21 days with degradation in vitro and developed less-intensive intraperitoneal adhesion along with a histologically weaker inflammatory response than the PG mesh after 28 days. It elicited an M2 macrophage-dominant foreign body reaction within the process, leading to a pro-remodeling response similar to the biological SIS mesh, which was superior to the PG mesh. The PGI mesh provided preponderant mechanical supports over the SIS mesh and the native abdominal wall with similar compliance. Collectively, the newly developed mesh advances the intraperitoneal applicability of electrospun meshes by guiding a pro-remodeling response and offers a feasible functionalization approach upon immunomodulation.

Type I collagen and fibromodulin enhance the tenogenic phenotype of hASCs and their potential for tendon regeneration.

Our previous work demonstrated the tendon-derived extracellular matrix (ECM) extracts as vital niches to specifically direct mesenchymal stem cells towards tenogenic differentiation. This study aims to further define the effective ECM molecules capable of teno-lineage induction on human adipose-derived stem cells (hASCs) and test their function for tendon engineering. By detecting the teno-markers expression levels in hASCs exposed to various substrate coatings, collagen I (COL1) and fibromodulin (FMOD) were identified to be the key molecules as a combination and further employed to the modification of poly(L-lactide-co-ε-caprolactone) electrospun nanoyarns, which showed advantages in inducting seeded hASCs for teno-lineage specific differentiation. Under dynamic mechanical loading, modified scaffold seeded with hASCs formed neo-tendon in vitro at the histological level and formed better tendon tissue in vivo with mature histology and enhanced mechanical properties. Primary mechanistic investigation with RNA sequencing demonstrated that the inductive mechanism of these two molecules for hASCs tenogenic differentiation was directly correlated with positive regulation of peptidase activity, regulation of cell-substrate adhesion and regulation of cytoskeletal organization. These biological processes were potentially affected by LOC101929398/has-miR-197-3p/TENM4 ceRNA regulation axis. In summary, COL1 and FMOD in combination are the major bioactive molecules in tendon ECM for likely directing tenogenic phenotype of hASCs and certainly valuable for hASCs-based tendon engineering.

An updated systematic review and meta-analysis of efficacy and safety of Chinese herbal medicine for treating atopic dermatitis.

BACKGROUND: This systematic review evaluated the Chinese herbal medicine (CHM) for treating atopic dermatitis (AD). METHODS: PubMed, EMBASE, the Cochrane library, the Wanfang database, and China National Knowledge Infrastructure (CNKI) were searched for relevant randomized controlled trials (RCTs) from inception to December 2021. Overall recovery rate, disease/symptom severity scoring, quality of life (QoL), recurrence rate, and incidence of adverse events (AEs) were evaluated. STATA SE 14.0 software was used for statistical analysis. RESULTS: 17 RCTs involving 1624 patients were eligible. CHM was associated with a higher overall recovery rate (risk ratio [RR] = 1.15, 95% confidence interval [CI]: 1.05, 1.26, p = .003) and decreased recurrence rate (odds ratio [OR] = 0.19, 95% CI: 0.07, 0.55, p = .002), both confirmed by sensitivity analyses. CHM could decrease scoring atopic dermatitis index (MD = -0.61, 95% CI: -1.12, -0.11, p = .017), however, sensitivity analysis revealed non-robustness. No significant differences were found between the CHM and the control group in Eczema Area and Severity Index, QoL, and the incidence of AEs. CONCLUSIONS: CHM was effective for treating AD as it could improve the overall recovery rate and decrease the recurrence rate. More studies are required to validate the potential of CHM on disease/symptoms severity and QoL.

Elastic 3D-Printed Nanofibers Composite Scaffold for Bone Tissue Engineering.

Loading nanoparticles into hydrogels has been a conventional approach to augment the printability of ink and the physicochemical characteristics of scaffolds in three-dimensional (3D) printing. However, the efficacy of this enhancement has often proven to be limited. We amalgamate electrospun nanofibers with 3D printing techniques to fabricate a composite scaffold reminiscent of a "reinforced concrete" structure, aimed at addressing bone defects. These supple silica nanofibers are synthesized through a dual-step process involving high-speed homogenization and low-temperature ball milling technology. The nanofibers are homogeneously blended with sodium alginate to create the printing ink. The resultant ink was extruded seamlessly, displaying commendable molding properties, thereby yielding scaffolds with favorable macroscopic morphology. In contrast to nanoparticle-reinforced scaffolds, composite scaffolds containing nanofibers exhibit superior mechanical attributes and bioactivity. These nanofiber composite scaffolds demonstrate enhanced osteoinductive properties in both in vitro and in vivo evaluations. To conclude, this research introduces a novel 3D printing approach where the fabricated nanofiber-infused 3D-printed scaffolds hold the potential to revolutionize the realm of 3D printing in the domain of bone tissue engineering.