Effect of adding arginine at different concentrations to experimental orthodontic resins: an in vitro study.

The aim of this study was to assess the effect of adding arginine at different concentrations to commercial and experimental orthodontic resins on shear bond strength (SBS), as well as on the antimicrobial activity of arginine against S. mutans. Metal brackets were bonded onto the surface of 120 bovine incisors using Transbond, OrthoCem, and an experimental resin (ER), adding 0, 2.5, 5, and 7 wt.% of arginine. The SBS test was performed in deionized water at 37 ºC for 24 h, at 0.5 mm/min. SBS test results were subjected to two-way ANOVA and Tukey's test (α = 0.05). CFU/mL data (antimicrobial assessment) were assessed by Kruskal-Wallis and Dunn's tests (α = 0.05). No statistical difference between the resins was observed in untreated groups (p > 0.05). The addition of arginine at 2.5% (27.7 MPa) and 5% (29.0 MPa) increased the SBS of Transbond when compared (p < 0.05) to OrthoCem (18.5 and 15.6 MPa, respectively) and ER (16.3 and 18.1 MPa, respectively). Arginine at 7% improved the SBS of Transbond (24.1 MPa) and ER (21.0 MPa), which was statistically higher (p < 0.05) than OrthoCem (12.6 MPa). OrthoCem did not show a statistically significant difference at the three concentrations of arginine (p > 0.05). The addition of arginine to resins reduced the count of S. mutans (p < 0.05). As for ER, all concentrations of arginine significantly decreased CFU/mL (p < 0.05). Among commercial resins, only 7% of arginine significantly reduced CFU/mL. The addition of arginine did not interfere with the bond strength and demonstrated antibacterial activity against S. mutans.

Mandible development under gestational protein restriction: cellular and molecular mechanisms.

Insufficient evidence regarding how maternal undernutrition affects craniofacial bone development persists. With its unique focus on the impact of gestational protein restriction on calvaria and mandible osteogenesis, this study aims to fill, at least in part, this gap. Female mice were mated and randomized into NP (normal protein) or LP (low protein) groups. On the 18th gestational day (GD), male embryos were collected and submitted to microtomography (µCT), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), PCR, and autophagy dynamic analyses. The study shows that the LP offspring exhibited lower body mass than the NP group, with µCT analysis revealing no volumetric differences in fetus's head. EDS analysis showed lower calcium and higher phosphorus percentages in mandibles and calvaria. SEM assessment evidenced higher hydroxyapatite crystal-like (HC) deposition on the calvaria surface in LP fetus. Conversely, lower HC deposition was observed on the mandible surface, suggesting delayed matrix mineralization in LP fetuses with a higher percentage of collagen fibers in the mandible bone. The autophagy process was reduced in the mesenchyme of LP fetuses. PCR array analysis of 84 genes revealed 27 genes with differential expression in the LP progeny-moreover, increased mRNA levels of Akt1, Mtor, Nfkb, and Smad1 in the LP offspring. In conclusion, the results suggest that gestational protein restriction anticipated bone differentiation in utero, before 18GD, where this process is reduced compared to the control, leading to the reduction in bone area at 15 postnatal day previously observed. These findings provide insights into the molecular and cellular mechanisms of mandible development and suggest potential implications for the Developmental Origins of Health and Disease (DOHaD).

Endoscopic Vein Harvesting - How Do We Do It?

The saphenous vein graft (SVG) remains the most used conduit as a second graft in Coronary Artery Bypass Grafting (CABG).1 Traditionally, surgeons harvest SVG with an open approach, making a long incision along the medial part of the leg or thigh. This procedure can potentially result in important complications, such as delayed wound healing, postoperative pain and infection.2 Thus, less invasive techniques for vessel harvesting have grown in popularity. Endoscopic vein harvesting (EVH) is a minimally invasive harvesting procedure, which only requires a short incision, leading to less wound complications and a faster return to normal daily activities. This article intends to describe how we do EVH technique in our centre, from the preparation of the patient to the postoperative period and share some tips and tricks from our experience.

Cellulose acetate scaffold coated with a hydroxyapatite/graphene oxide nanocomposite for application in tissue engineering.

The objective of this study was to synthesize and characterize porous Cellulose Acetate (CA) scaffolds using the electrospinning technique and functionalize the surface of the scaffolds obtained through the dip-coating method with a Hydroxyapatite (HA) nanocomposite and varying concentrations of graphene oxide (GO) for application in tissue engineering regeneration techniques. The scaffolds were divided into four distinct groups based on their composition: 1) CA scaffolds; 2) CAHAC scaffolds; 3) CAHAGOC 1.0% scaffolds; 4) CAHAGOC 1.5% scaffolds. Scaffold analyses were conducted using X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Raman Spectroscopy, Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEM/EDS), and in vitro cell viability assays (WST). For the biological test analysis, Variance (two-way) was used, followed by Tukey's post-test (α = 0.05). The XRD results revealed the predominant presence of CaP phases in the CAHAC, CAHAGOC 1.0%, and CAHAGOC 1.5% groups, emphasizing the presence of HA in the scaffolds. FTIR demonstrated characteristics of cellulose and PO4 bands in the groups containing HA, confirming the presence of CaP in the synthesized materials, as also indicated by XRD. Raman spectroscopy showed the presence of D and G bands, consistent with GO, confirming the successful incorporation of the HAGO nanocomposite into the scaffolds. The micrographs displayed overlapping electrospun fibers, forming the three-dimensional structure in the produced scaffolds. It was possible to observe hydroxyapatite crystals filling some of these pores, creating a suitable structure for cell adhesion, proliferation, and nutrition, as corroborated by the results of in vitro tests. All scaffolds exhibited high cell viability, with significant cell proliferation. Even after 48 h, there was a slight reduction in the number of cells, but a noteworthy increase in cell proliferation was evident in the CAHAGOC 1.5% group after 48 h (p < 0.05). In conclusion, it can be affirmed that the produced scaffolds demonstrated physical and biological characteristics and properties capable of promoting cell adhesion and proliferation. Therefore, they represent significant potential for application in tissue engineering, offering a new perspective regarding techniques and biomaterials applied in regenerative therapies.

The Risk Of Waiting Up To One Year For Cardiac Surgery.

INTRODUCTION: Cardiac disease is associated with a risk of death, both by the cardiac condition and by comorbidities. The waiting time for surgery begins with the onset of symptoms and includes referral, completion of the diagnosis and surgical waiting list (SWL). This study was conducted during the COVID-19 pandemic, which affected surgical capacity and patients' morbidities. METHODS: The cohort includes 1914 consecutive adult patients (36.6% women, mean age 67 ±11 years), prospectively registered in the official SWL from January 2019 to December 2021. We analyzed waiting times ranging from 4 days to one year to exclude urgencies and outliers. Priority was classified by the national criteria for non-oncologic or oncology surgery. RESULTS: During the study period, 74% of patients underwent surgery, 19.2% were still waiting, and 4.3% dropped out. Most cases were valvular (41.2%) or isolated bypass procedures (34.2%). Patients were classified as non-priority in 29.7%, priority in 61.8%, and high priority in 8.6%, with significantly different SWL mean times between groups (p<0.001). The overall mean waiting time was 167 ± 135 days. Mortality on SWL was 2.5%, or 1.1 deaths per patient/weeks. There were two mortality independent predictors: age (HR 1.05) and the year 2021 versus 2019 (HR 2.07) and a trend toward higher mortality in priority patients versus non-priority (p=0.065). The overall risk increased with time with different slopes for each year. Using the time limits for SWL in oncology, there would have been a significant risk reduction (p=0.011). CONCLUSION: The increased risk observed in 2021 may be related to the pandemic, either by increasing waiting time or by direct mortality. Since risk stratification is not entirely accurate, waiting time emerges as the most crucial factor influencing mortality, and implementing stricter time limits could have led to lower mortality rates.

The Isosceles Nasal Tip-Laser-Assisted Midline Assessment in Rhinoplasty.

The accurate determination of the nasal tip's spatial location is crucial for achieving symmetry in rhinoplasty. Even minor deviations can result in asymmetrical lengths and configurations of the nostrils. Our approach centers on defining the nasal tip position by establishing the midline of the nasal base and projecting an isosceles triangle. This triangle, with the tip as the vertex and alar creases as angles, ensures symmetric sidewalls. The symmetry axis, derived from the isosceles triangle, guides the placement of the tip sidewalls and columella. To implement this, we use anatomical benchmarks such as the implantation of the nasal base and position of the alar creases, considering inherent facial asymmetries. We introduce a laser gadget as an auxiliary tool, projecting perpendicular lines to guide precise midline alignment. Marking specific points, including interbrow midpoint and alar creases, ensures accuracy. In the past 12 months, we applied this methodology in 247 rhinoplasty cases, observing improved outcomes and patient satisfaction. Our proposal of utilizing isosceles triangles provides a streamlined approach to achieving symmetry. The laser device, while beneficial, should be viewed as supportive rather than an absolute guiding measure.

Precision Rhinoplasty Cylindric Burrs-Sidewall Aesthetics.

The development of power instruments has led to great advances in rhinoplasty. It has helped to reduce operating time, minimize damage to the surrounding soft tissues, and allow precision bony modification compared with the use of manual rasps. Burrs help ensure precise results by (i) creating a smooth transition between the lateral nasal sidewall and the face, (ii) treating bony asymmetries, and (iii) producing homogeneous upper and middle thirds that softy translate into the upper lateral cartilages. The aim of this paper is to show applications of cylindrical burrs in rhinoplasty surgery to treat the dorsal upper and middle thirds as well as lateral sidewalls of the nose, regardless of whether the dorsal preservation or structure technique is used. This approach offers a safe, fast, and precise technique that can be used in conjunction with piezo osteotomy to obtain the optimal outcomes.

A Novel Treatment for Convex Lateral Crura: The Inverted Spanning Suture.

Rhinoplasty is one of the most complex and challenging procedures in plastic surgery, even for experienced surgeons. Among the steps leading to an aesthetic and functional nose, there is the nasal tip improvement. Today's approach to nasal tip is the product of different techniques shifting through time, mainly from a resection tendency, to preservation and suture use to reshape cartilages. Addressing the lateral crura is vital to an aesthetic nasal tip and it is frequently obtained by adequate suture techniques. The alar-spanning suture described by Perkins is one of such. Regardless of its importance, it was not able to improve convex crura in some cases. The inverted alar-spanning suture (ISS) is an adaptation designed to treat those cases with the suture alone. ISS is a novel technique that can lead to better results treating the convex lateral crura by distributing the force vector in a more effective way. New techniques in rhinoplasty have multiplied, bringing this procedure to a new level and keeping up with the updated notion of restoration instead of excision the ISS is a new, precise, approach to an old problem.

Eyebrow Lift: Open-Book ROOF Transposition and Orbicularis-Frontalis Sliding Maneuver.

This article delves into innovative surgical techniques, the open-book ROOF (retro-orbicularis oculi fat) transposition technique (OBRoof) and the orbicularis-frontalis sliding maneuver (OFS), designed for eyebrow and upper eyelid rejuvenation in the aging process. Emphasis is placed on understanding the dynamic changes occurring within the forehead and eyebrow envelope's five layers and their intrinsic relationships as well as the impact of the ROOF ptosis causing upper eyelid hooding. The OBRoof technique is highlighted for its effectiveness in addressing ptotic volume, offering a rejuvenated appearance by relocating volume to the supraciliary region.In the OFS, we explore the concept of extensive dissection above the upper border of the eyebrow to allow for free repositioning of the eyebrow. The stabilization is based on deep-plane facelift concepts, as the orbicularis oculi muscle corresponds to the superficial muscular aponeurotic system, and it is anchored to the deep layers (periosteum) by passing through the frontal muscle.In summary, this article provides a comprehensive exploration of innovative and minimally invasive techniques for eyebrow and upper eyelid rejuvenation, shedding light on their anatomical foundations, procedural intricacies, and the potential for achieving natural and lasting outcomes.

Biological Activity and Chemical Composition of Propolis Extracts with Potential Use in Vulvovaginal Candidiasis Management.

Environmental sustainability is an increasing challenge in the pharmaceutical field, leading to the search for eco-friendly active ingredients. Among natural ingredients, propolis arises as an excellent alternative, being a complex substance with pharmacological properties. This work aims to explore the potential of propolis as a new pharmaceutical ingredient for the replacement of conventional vulvovaginal antifungals. Propolis extracts were obtained by Ultrasound-Assisted Extraction using different solvents (water, water/ethanol (50:50, v/v), and ethanol). Afterwards, the extracts were characterized regarding total phenolic content (TPC), antioxidant/antiradical activities, radical scavenging capacity, antifungal activity against strains of Candida species, and viability effect on two female genital cell lines. The aqueous extract achieved the best TPC result as well as the highest antioxidant/antiradical activities and ability to capture reactive oxygen species. A total of 38 phenolic compounds were identified and quantified by HPLC, among which ferulic acid, phloridzin and myricetin predominated. Regarding the anti-Candida spp. activity, the aqueous and the hydroalcoholic extracts achieved the best outcomes (with MIC values ranging between 128 and 512 µg/mL). The cell viability assays confirmed that the aqueous extract presented mild selectivity, while the hydroalcoholic and alcoholic extracts showed higher toxicities. These results attest that propolis has a deep potential for vulvovaginal candidiasis management, supporting its economic valorization.

Cardiac magnetic resonance patterns of left ventricular remodeling in patients with severe aortic stenosis referred to surgical aortic valve replacement.

Left ventricular (LV) hypertrophy is a common finding in patients with severe aortic stenosis (AS). Cardiac magnetic resonance (CMR) is the gold-standard technique to evaluate LV remodeling. Our aim was to assess the prevalence and describe the patterns of LV adaptation in AS patients before and after surgical aortic valve replacement (AVR). Prospective study of 130 consecutive patients (71y [IQR 68-77y], 48% men) with severe AS, referred for surgical AVR. Patterns of LV remodeling were assessed by CMR. Besides normal LV ventricular structure, four other patterns were considered: concentric remodeling, concentric hypertrophy, eccentric hypertrophy, and adverse remodeling. At baseline CMR study: mean LV indexed mass: 81.8 ± 26.7 g/m2; mean end-diastolic LV indexed volume: 85.7 ± 23.1 mL/m2 and median geometric remodeling ratio: 0.96 g/mL [IQR 0.82-1.08 g/mL]. LV hypertrophy occurred in 49% of subjects (concentric 44%; eccentric 5%). Both normal LV structure and concentric remodeling had a prevalence of 25% among the cohort; one patient had an adverse remodeling pattern. Asymmetric LV wall thickening was present in 55% of the patients, with predominant septal involvement. AVR was performed in 119 patients. At 3-6 months after AVR, LV remodeling changed to: normal ventricular geometry in 60%, concentric remodeling in 27%, concentric hypertrophy in 10%, eccentric hypertrophy in 3% and adverse remodeling (one patient). Indexes of AS severity, LV systolic and diastolic function and NT-proBNP were significantly different among the distinct patterns of remodeling. Several distinct patterns of LV remodelling beyond concentric hypertrophy occur in patients with classical severe AS. Asymmetric hypertrophy is a common finding and LV response after AVR is diverse.

Osteotomy Techniques in Preservation Rhinoplasty with an Analysis of a Radix-Skull Base Computed Tomography Series.

This study aims to explain our experience with dorsal preservation osteotomies, focusing on transverse, lateral, and dorsal aesthetic lines (DAL) osteotomies. We describe the utilization of a variety of surgical instruments, including osteotomes, saws, burrs, and piezo. This paper describes our concept of transcutaneous ultrasonic osteotomy, microedged-specific osteotomy, applying drills for lateral wall reshaping, and integrating piezo technology to establish new DAL. Furthermore, we present a radix-skull base computed tomography series analysis to evaluate the safety of transverse and radix osteotomies.

Shedding light on ai in radiology: A systematic review and taxonomy of eye gaze-driven interpretability in deep learning.

X-ray imaging plays a crucial role in diagnostic medicine. Yet, a significant portion of the global population lacks access to this essential technology due to a shortage of trained radiologists. Eye-tracking data and deep learning models can enhance X-ray analysis by mapping expert focus areas, guiding automated anomaly detection, optimizing workflow efficiency, and bolstering training methods for novice radiologists. However, the literature shows contradictory results regarding the usefulness of eye-tracking data in deep-learning architectures for abnormality detection. We argue that these discrepancies between studies in the literature are due to (a) the way eye-tracking data is (or is not) processed, (b) the types of deep learning architectures chosen, and (c) the type of application that these architectures will have. We conducted a systematic literature review using PRISMA to address these contradicting results. We analyzed 60 studies that incorporated eye-tracking data in a deep-learning approach for different application goals in radiology. We performed a comparative analysis to understand if eye gaze data contains feature maps that can be useful under a deep learning approach and whether they can promote more interpretable predictions. To the best of our knowledge, this is the first survey in the area that performs a thorough investigation of eye gaze data processing techniques and their impacts in different deep learning architectures for applications such as error detection, classification, object detection, expertise level analysis, fatigue estimation and human attention prediction in medical imaging data. Our analysis resulted in two main contributions: (1) taxonomy that first divides the literature by task, enabling us to analyze the value eye movement can bring for each case and build guidelines regarding architectures and gaze processing techniques adequate for each application, and (2) an overall analysis of how eye gaze data can promote explainability in radiology.

Intersectorality in a conditional cash transfer programme: Actors, convergences and conflicts.

This study aimed to analyse intersectoral arrangements among the health, education and social assistance sectors in the operationalization of the Bolsa Família Program (BFP). A qualitative approach was carried out, in a peripheral region of a large urban centre of Southeast Brazil. Data content analysis was performed on the basis of reference in the Actor-Network Theory (ANT) using statements by the actors and considering ideas in dispute and work processes in the geopolitical territorial context. Seventeen managers of Municipal Secretariats of Health, Education and Social Assistance were interviewed, as were basic education, primary health care and social assistance professionals. One-off, episodic and discontinuous intersectoral actions were identified, with limited integration among sectors. Convergences and conflicts were found with respect to the institutional processes of BFP. The convergences referred to the conceptions shared among the actors about the role of intersectoral collaboration, as they recognize themselves as providing care to the same vulnerable population. Considering the multiple vulnerabilities of these families, the convergence of actions from different sectors can impact factors that condition inequalities. The conflicts were related to institutional conditions, to sectorized work processes and to a lack of understanding by professionals about the duties of their respective sectors.

Trends in 3D models of inflammatory bowel disease.

Inflammatory bowel disease (IBD) encompasses a set of chronic inflammatory conditions, namely Crohn's disease and ulcerative colitis. Despite all advances in the management of IBD, a definitive cure is not available, largely due to a lack of a holistic understanding of its etiology and pathophysiology. Several in vitro, in vivo, and ex vivo models have been developed over the past few decades in order to abbreviate remaining gaps. The establishment of reliable and predictable in vitro intestinal inflammation models may indeed provide valuable tools to expedite and validate the development of therapies for IBD. Three-dimensional (3D) models provide a more accurate representation of the different layers of the intestine, contributing to a stronger impact on drug screening and research on intestinal inflammation, and bridging the gap between in vitro and in vivo research. This work provides a critical overview on the state-of-the-art on existing 3D models of intestinal inflammation and discusses the remaining challenges, providing insights on possible pathways towards achieving IBD mimetic models. We also address some of the main challenges faced by implementing cell culture models in IBD research while bearing in mind clinical translational aspects.

Glycerol as substrate and NADP+-dependent glyceraldehyde-3-phosphate dehydrogenase enable higher production of 3-hydroxypropionic acid through the ß-alanine pathway in E. coli.

Microbial engineering is a promising way to produce3-HP using biorenewable substrates such as glycerol. However, theglycerol pathway to obtain 3-HPrequires vitamin B-12, which hinders its economic viability. The present work showed that 3-HP can be efficiently produced from glycerol through the ß-alanine pathway. To develop a cell factory for this purpose, glycerol was evaluated as a substrate and showed more than two-fold improved 3-HP production compared to glucose. Next, the reducing power was modulated by overexpression of an NADP+ -dependent glyceraldehyde-3-phosphate dehydrogenase coupled with CRISPR-based repression of the endogenous gapA gene, resulting in a 91 % increase in 3-HP titer. Finally, the toxicity of 3-HP accumulation was addressed by overexpressing a putative exporter (YohJK). Fed-batch cultivation of the final strain yielded 72.2 g/L of 3-HP and a productivity of 1.64 g/L/h, which are the best results for the ß-alanine pathway and are similar to those found for other pathways.

Procedural success in transaxillary transcatheter aortic valve implantation according to type of transcatheter heart valve: results from the multicenter TAXI registry.

BACKGROUND: Transaxillary (TAx) transcatheter aortic valve implantation (TAVI) is a preferred alternative access in patients ineligible for transfemoral TAVI. AIMS: This study used the Trans-AXillary Intervention (TAXI) registry to compare procedural success according to different types of transcatheter heart valves (THV). METHODS: For the TAXI registry anonymized data of patients treated with TAx-TAVI were collected from 18 centers. Acute procedural, early and 1-month clinical outcomes were adjudicated in accordance with standardized VARC-3 definitions. RESULTS: From 432 patients, 368 patients (85.3%, SE group) received self-expanding (SE) THV and 64 patients (14.8%, BE group) received balloon-expandable (BE) THV. Imaging revealed lower axillary artery diameters in the SE group (max/min diameter in mm: 8.4/6.6 vs 9.4/6.8 mm; p < 0.001/p = 0.04) but a higher proportion of axillary tortuosity in BE group (62/368, 23.6% vs 26/64, 42.6%; p = 0.004) with steeper aorta-left ventricle (LV) inflow (55° vs 51°; p = 0.002) and left ventricular outflow tract (LVOT)-LV inflow angles (40.0° vs 24.5°; 0.002). TAx-TAVI was more often conducted by right sided axillary artery in the BE group (33/368, 9.0% vs 17/64, 26.6%; p < 0.001). Device success was higher in the SE group (317/368, 86.1% vs 44/64, 68.8%, p = 0.0015). In logistic regression analysis, BE THV were a risk factor for vascular complications and axillary stent implantation. CONCLUSIONS: Both, SE and BE THV can be safely used in TAx-TAVI. However, SE THV were more often used and were associated with a higher rate of device success. While SE THV were associated with lower rates of vascular complications, BE THV were more often used in cases with challenging anatomical circumstances.

Evaluation of mechanical properties and morphology of miniscrews Ti6Al4V cold worked versus annealed in artificial bones.

PURPOSE: This study aimed to evaluate the influence of different manufacturing procedures (Eli annealed - hot work versus cold worked - cold work) of the raw material under mechanical properties and morphological characteristics of orthodontic miniscrews (MS). MATERIAL AND METHODS: Thirty MS were randomly separated into 3 types (n=10) according to manufacturer and manufacturing process of the raw material: type A - SIN® annealed (control group); type B - Dentfix® annealed; and, type C - Dentfix® cold worked. MI were inserted in artificial bone blocks, through the manufacturer's specific manual key attached to the digital torquemeter stabilized via custom device. Data of fracture's occurrence was performed using Fisher's exact test. Comparisons between the other two types regarding insertion torque and removal torque were performed using the Mann-Whitney test. Data of fracture torque, shear stress, normal stress and torque ratio was submitted to Kruskal Wallis and Dunn tests (α=0.05). Representative images of surface morphology and fractures were selected. RESULTS: Type C showed statistically the lowest fracture torque (N.cm) (26.11±0.41) (P=0.0012) and highest torque ratio (%) (98.74±0.85) (P=0.0007). Type C showed statistically higher calculated shear (MPa) (2,432.73±508.41) and normal stress (MPa) (1,403.86±293.39) than type B and type A, showing that they differed in relation to the mechanical strength of the material with which they were made (P=0.0007). CONCLUSION: Type A fractured completely inside the most apical bone. Type B and type C fractured closer to the transmucosal profile. Cold worked process should be more prone to fractures than those annealed raw manufactured.