Antiferroelectricity-Induced Negative Thermal Expansion in Double Perovskite Pb2 CoMoO6.

Materials with negative thermal expansion (NTE) attract significant research attention owing to their unique physical properties and promising applications. Although ferroelectric phase transitions leading to NTE are widely investigated, information on antiferroelectricity-induced NTE remains limited. In this study, single-crystal and polycrystalline Pb2 CoMoO6 samples are prepared at high pressure and temperature conditions. The compound crystallizes into an antiferroelectric Pnma orthorhombic double perovskite structure at room temperature owing to the opposite displacements dominated by Pb2+ ions. With increasing temperature to 400 K, a structural phase transition to cubic Fm-3m paraelectric phase occurs, accompanied by a sharp volume contraction of 0.41%. This is the first report of an antiferroelectric-to-paraelectric transition-induced NTE in Pb2 CoMoO6 . Moreover, the compound also exhibits remarkable NTE with an average volumetric coefficient of thermal expansion αV = -1.33 × 10-5 K-1 in a wide temperature range of 30-420 K. The as-prepared Pb2 CoMoO6 thus serves as a prototype material system for studying antiferroelectricity-induced NTE.

The First Case in Japan of Fulminant Myocarditis Due to Multisystem Inflammatory Syndrome in Children (MIS-C) That Required Mechanical Circulatory Support.

Multisystem inflammatory syndrome in children (MIS-C) is a novel hyperinflammatory syndrome that is associated with severe acute respiratory syndrome coronavirus 2 infections. Reports describing the mechanical circulatory support (MCS) and myocardial biopsy for fulminant myocarditis due to MIS-C are limited.A 13-year-old male patient with MIS-C underwent treatment, including immunosuppressive therapy and MCS devices, and managed to recover from pulseless electrical activity cardiac arrest.This is the first patient in Japan with MIS-C who required MCS devices in Japan. Appropriate and immediate treatment with immunosuppressive therapy and MCS devices is important.

Selective Synthesis of Perovskite Oxyhydrides Using a High-Pressure Flux Method.

Oxyhydrides with multi-anions (O2- and H-) are a recently developed material family and have attracted attention as catalysts and hydride ion conductors. High-pressure and high-temperature reactions are effective in synthesizing oxyhydrides, but the reactions sometimes result in inhomogeneous products due to insufficient diffusion of the solid components. Here, we synthesized new perovskite oxyhydrides SrVO2.4H0.6 and Sr3V2O6.2H0.8. We demonstrated that the addition of SrCl2 flux promotes diffusion during high-pressure and high-temperature reactions, and can be used for selective synthesis of the oxyhydride phases. We conducted in-situ synchrotron X-ray diffraction measurements to reveal the role of this flux and reaction pathways. We also demonstrated the electronic and magnetic properties of the newly synthesized oxyhydrides and that they work as anode materials for Li-ion batteries with excellent reversibility and high-rate characteristics, the first case with an oxyhydride. Our synthesis approach would also be effective in synthesizing various types of multi-component systems.

A-Site Columnar-Ordered Perovskite CaZnV2O6 as a Pauli-Paramagnetic Metal.

In this study, we successfully synthesized a novel A-site columnar-ordered perovskite CaZnV2O6. This compound features a square-planar-coordinated Zn2+ disorder, which is the same characteristic as the centrosymmetric paraelectric CaMnTi2O6. Unlike CaMnTi2O6, which shows a centrosymmetric paraelectric-noncentrosymmetric ferroelectric transition, CaZnV2O6 retains Pauli-paramagnetic metallicity arising from itinerant V4+ d1 electrons and centrosymmetry down to 5 K. Based on analogous compounds, we expect CaZnV2O6 to provide a new playground for the electronic and magnetic states of V4+.

Out-of-plane polarization reversal and changes in in-plane ferroelectric and ferromagnetic domains of multiferroic BiFe0.9Co0.1O3 thin films by water printing.

BiFe0.9Co0.1O3 is a promising material for an ultra-low-power-consumption nonvolatile magnetic memory device because local magnetization reversal is possible through application of an electric field. Here, changes in ferroelectric and ferromagnetic domain structures in a multiferroic BiFe0.9Co0.1O3 thin film induced by "water printing", which is a polarization reversal method involving chemical bonding and charge accumulation at the interface between the liquid and the film, was investigated. Water printing using pure water with pH = 6.2 resulted in an out-of-plane polarization reversal from upward to downward. The in-plane domain structure remained unchanged after the water printing process, indicating that 71° switching was achieved in 88.4% of the observation area. However, magnetization reversal was observed in only 50.1% of the area, indicating a loss of correlation between the ferroelectric and magnetic domains because of the slow polarization reversal due to nucleation growth.

Magnetization controlled by crystallization in soft magnetic Fe-Si-B-P-Cu alloys.

Soft magnetic materials have low coercive fields and high permeability. Recently, nanocrystalline alloys obtained using annealing amorphous alloys have attracted much interest since nanocrystalline alloys with small grain sizes of tens of nanometers exhibit low coercive fields comparable to that of amorphous alloys. Since nanocrystalline soft magnetic materials attain remarkable soft magnetic properties by controlling the grain size, the crystal grains' microstructure has a substantial influence on the soft magnetic properties. In this research, we examined the magnetic properties of Fe-Si-B-P-Cu nanocrystalline soft magnetic alloys obtained by annealing amorphous alloys. During crystallization, the observation findings reveal the correlation between the generated microstructures and soft magnetic properties.

Suppression of Pressure-Induced Phase Transitions in a Monoclinically Distorted LiNbO3-Type CuNbO3 by Preference for a CuO3 Triangular Coordination Environment.

Pressure-induced phase transitions in a monoclinically distorted LiNbO3-type CuNbO3 with triangularly coordinated Cu and octahedrally coordinated Nb were experimentally and computationally investigated. Phase transitions into GdFeO3-type or NaIO3-type structures generally observed in LiNbO3-type compounds below 30 GPa were not detected in CuNbO3 even at the maximum experimental pressure, 32.4 GPa. Our density functional theory calculations revealed that the phase transition is suppressed by the preference for the CuO3 triangular coordination environment, which reduces the total internal energy. This study clarifies that the change in the coordination environment of given ions can affect the pressure-induced phase transition.

Bi0.5Pb0.5FeO3 with Unusual Pb Charge Disproportionation: Indication of a Systematic Charge Distribution Change in Bi0.5Pb0.5MO3 (M: 3d Transition Metal).

Bi0.5Pb0.5FeO3 with 1:1 mixture of Bi and Pb having charge degrees of freedom at the A-site of perovskite oxide ABO3 is obtained for the first time by high-pressure synthesis. Comprehensive synchrotron X-ray powder diffraction, optical second harmonic generation, Mössbauer spectroscopy, and hard X-ray photoemission spectroscopy measurements revealed that Bi0.5Pb0.5FeO3 is a canted antiferromagnetic insulator crystalizing in a nonpolar tetragonal I4/mcm structure with √2a × âˆš2a × 2a unit cell and has unusually Pb charge disproportionated Bi3+0.5Pb2+0.25Pb4+0.25Fe3+O3 charge distribution. The valence of transition metal M in Bi0.5Pb0.5MO3 changes from 3.5+ to 3+ and finally to 2+ from Mn to Fe and to Ni, from left to right in the periodic table as the 3d-level becomes deeper. The valences of Bi and Pb increase to compensate for the decrease in the M's valence, and Pb changes from 6s2 (2+) to 6s0 (4+) before Bi changes.

Negative Thermal Expansion in Fluoroapatite Pb5(VO4)3F Enhanced by the Steric Effect of Pb2.

Negative thermal expansion (NTE) is an unusual thermophysical phenomenon and has gained attention as a way of controlling thermal expansion. Here, we report a substantial NTE in fluoroapatite Pb5(VO4)3F in a limited temperature range. The dilatometric study revealed volume shrinkage below 150 K, giving a linear thermal expansion coefficient of αL = -44 ppm/K in the temperature range from 140 to 120 K upon heating. The NTE behavior is associated with a structural transition from the hexagonal (P63/m) phase to the monoclinic (P21/b) phase. Such a structural transition has been found in other apatite-type compounds, but the magnitude of the volume change in Pb5(VO4)3F is remarkable. Our structural analysis revealed that the structural transition is classified as an antiferroelectric-to-paraelectric transition and the volume change during the transition is enhanced by the steric effect of 6s2 lone-pair electrons of Pb2+.

SrV0.3Fe0.7O2.8: A Vacancy-Ordered Fe-Based Perovskite Exhibiting Room-Temperature Magnetoresistance.

We report room-temperature (RT) magnetoresistance (MR) in a novel Fe-based perovskite, SrV0.3Fe0.7O2.8. This compound contains ordered oxygen vacancies in every fifth primitive perovskite (111)p plane, leading to a layered structure consisting of triple-octahedral and double-tetrahedral layers. Along with the oxygen vacancies, the transition-metal ions are also ordered: the octahedral sites are occupied by 100% of Fe ions, while the tetrahedral sites are occupied by 25% of Fe ions and 75% of V ions. As a result, SrV0.3Fe0.7O2.8 forms a magnetically striped lattice in which the octahedral layers with 100% of magnetic Fe ions are separated by the diluted magnetic layer. The compound exhibits weak ferromagnetism and shows a large negative MR (-5% at 3 T) at RT, despite the small saturation moment (0.4 µB/Fe atom). Thus, this type of layered compound is promising for further large MR by an increase of magnetization through chemical substitution.

V-V Dimerization and Magnetic State of Cobalt Ions in Ilmenite-Type CoVO3.

The nature of chemical bonds determines the electronic and magnetic properties of compounds. A metal-metal bonding (V-V dimer) and its effect on the magnetism of ilmenite-type CoVO3 were studied. Polycrystalline CoVO3 samples were synthesized using a high-pressure synthesis method. Crystal structure refinement revealed that V-V dimers exist at temperatures below 550 K in the vanadium layers. Co2+ in CoVO3 exhibits an S = 3/2 state, whereas a Jeff = 1/2 state was reported in ilmenite-type CoTiO3. The existence of V-V dimers reduces the structural symmetry (from R3 to P1), which can change the magnetic ground state.

Sequential Pressure-Induced B1-B2 Transitions in the Anion-Ordered Oxyhydride Ba2YHO3.

We present a detailed experimental and computational investigation of the influence of pressure on the mixed-anion oxyhydride phase Ba2YHO3, which has recently been shown to support hydride conductivity. The unique feature of this layered perovskite is that the oxide and hydride anions are segregated into distinct regions of the unit cell, in contrast to the disordered arrangement in closely related Ba2ScHO3. Density functional theory (DFT) calculations reveal that the application of pressure drives two sequential B1-B2 transitions in the interlayer regions from rock salt to CsCl-type ordering, one in the hydride-rich layer at approximately 10 GPa and another in the oxide-rich layer at 35-40 GPa. To verify the theoretical predictions, we experimentally observe the structural transition at 10 GPa using high-pressure X-ray diffraction (XRD), but the details of the structure cannot be solved due to peak broadening of the XRD patterns. We use DFT to explore the structural impact of pressure on the atomic scale and show how the pressure-dependent properties can be understood in terms of simple electrostatic engineering.

Realization of Negative Thermal Expansion in Lead-Free Bi0.5K0.5VO3 by the Suppression of Tetragonality.

Bi1/2K1/2VO3 is a lead-free PbTiO3-type compound with a tetragonality (c/a = 1.054) comparable to that of typical ferroelectric PbTiO3 (c/a = 1.064) with negative thermal expansion (NTE) during the tetragonal-to-cubic phase transition; therefore, Bi1/2K1/2VO3 is a potential lead-free NTE material if its metastable perovskite structure can be maintained at high temperatures. In the present experiment, electron doping in Bi1/2K1/2VO3 was conducted through substituting K+ with La3+ to suppress the tetragonality and achieve NTE. La substitution successfully suppressed the tetragonality of Bi1/2K1/2VO3 and also improved its thermal stability. Moreover, both composition- and temperature-induced tetragonal-to-cubic phase transitions occurred. In particular, a large volume shrinkage with a large negative thermal coefficient of expansion (CTE) was obtained for Bi0.5K0.46La0.04VO3 during the tetragonal-to-cubic phase transition (ΔV = -0.66%). Hence, this study extends the NTE family and also sheds light on the exploration of lead-free piezoelectric materials with controllable thermal expansion.

High-Pressure and High-Temperature Synthesis of Anion-Disordered Vanadium Perovskite Oxyhydrides.

Crystallographic order-disorder phenomena in solid state compounds are of fundamental interest due to intimate relationship between the structure and properties. Here, by using high-pressure and high-temperature synthesis, we obtained vanadium perovskite oxyhydrides Sr1-xNaxVO3-yHy (x = 0, 0.05, 0.1, 0.2) with an anion-disordered structure, which is different from anion-ordered SrVO2H synthesized by topochemical reduction. High-pressure and high-temperature synthesis from nominal composition SrVO2H yielded the anion-disordered perovskite SrVO3-yHy (y ∼ 0.4) with a significant amount of byproducts, while Na substitution resulted in the almost pure anion-disordered perovskite Sr1-xNaxVO3-yHy with an increased amount of hydride anion (y ∼ 0.7 for x = 0.2). The obtained disordered phases for x = 0.1 and 0.2 are paramagnetic with almost temperature-independent electronic conductivity, whereas anion-ordered SrVO2H is an antiferromagnetic insulator. Although we obtained the anion-disordered perovskite under high pressure, a first-principles calculation revealed that the application of pressure stabilizes the ordered phase due to a reduced volume in the ordered structure, suggesting that a further increase of the pressure or reduction of the reaction temperature leads to the anion ordering. This study shows that anion ordering in oxyhydrides can be controlled by changing synthetic pressure and temperature.

Intermetallic Charge Transfer in V-Substituted PbCrO3.

PbCrO3 features an unusual charge distribution Pb0.52+Pb0.54+Cr3+O3 with Pb charge disproportionation at ambient pressure. A charge transfer between Pb and Cr is induced by the application of pressure resulting in Pb2+Cr4+O3 charge distribution and a large volume collapse. Here, structural and charge distribution changes in PbCr1-xVxO3 are investigated. Despite a cubic crystal structure in 0 ≤ x ≤ 0.60, discontinuous reduction in the unit cell volume was observed between x = 0.35 and 0.40. Hard X-ray photoemission spectroscopy confirmed the change in Pb charge state from the coexisting Pb2+ and Pb4+ at x = 0.35 to single Pb2+ at x = 0.40. This indicates that V substitution stabilizes the high pressure cubic Pb2+Cr4+O3-type phase. With further increase in the V substitution, the PbVO3-type polar tetragonal phase appeared at x = 0.80.

Observation of novel charge ordering and spin reorientation in perovskite oxide PbFeO3.

PbMO3 (M = 3d transition metals) family shows systematic variations in charge distribution and intriguing physical properties due to its delicate energy balance between Pb 6s and transition metal 3d orbitals. However, the detailed structure and physical properties of PbFeO3 remain unclear. Herein, we reveal that PbFeO3 crystallizes into an unusual 2ap × 6ap × 2ap orthorhombic perovskite super unit cell with space group Cmcm. The distinctive crystal construction and valence distribution of Pb2+0.5Pb4+0.5FeO3 lead to a long range charge ordering of the -A-B-B- type of the layers with two different oxidation states of Pb (Pb2+ and Pb4+) in them. A weak ferromagnetic transition with canted antiferromagnetic spins along the a-axis is found to occur at 600 K. In addition, decreasing the temperature causes a spin reorientation transition towards a collinear antiferromagnetic structure with spin moments along the b-axis near 418 K. Our theoretical investigations reveal that the peculiar charge ordering of Pb generates two Fe3+ magnetic sublattices with competing anisotropic energies, giving rise to the spin reorientation at such a high critical temperature.

Polarization Rotation at Morphotropic Phase Boundary in New Lead-Free Na1/2Bi1/2V1-xTixO3 Piezoceramics.

In this work, we show that polarization rotation enhances the piezoresponse in a high-performance lead-free piezoelectric material, Na1/2Bi1/2V1-xTixO3, a solid solution between tetragonal Na1/2Bi1/2VO3 and rhombohedral Na1/2Bi1/2TiO3, obtained by high-pressure synthesis. The system forms a pure perovskite structure with a favorable morphotropic phase boundary (MPB) located around x = 0.90, which separates the tetragonal and rhombohedral phases. In addition, a distinct monoclinic phase with polarization rotation as functions of composition and temperature is observed. XRD measurements revealed the moderately high Curie temperature of 523 K at x = 0.95 in the MPB. The piezoelectric coefficient d33 of the monoclinic x = 0.95 sample, 42 pC/N, is higher than those of the tetragonal and rhombohedral phases. Even though the present lead-free Na1/2Bi1/2V1-xTixO3 ceramics feature smaller d33 values compared to many currently available lead-free piezoelectric materials as a result of insufficient poling and low density, we expect our findings open up opportunities for exploring promising lead-free piezoelectric materials in Na1/2Bi1/2VO3-based perovskites.

Stabilized Charge, Spin, and Orbital Ordering by the 6s2 Lone Pair in Bi0.5Pb0.5MnO3.

Bi and Pb ions with charge degree of freedom depending on 6s2 and 6s0 electronic configurations were combined with the Mn ion in a perovskite oxide. Comprehensive theoretical and experimental investigations revealed the Bi3+0.5Pb2+0.5Mn3+0.5Mn4+0.5O3 charge ordered state with CE-type spin and dz2 orbital orderings as observed in La0.5Ca0.5MnO3, Nd0.5Sr0.5MnO3, and Bi0.5Sr0.5MnO3. The charge and orbital orderings were preserved above 500 K owing to the stereochemical activity of Bi3+ and Pb2+ ions which stabilized the structural distortion.

Enhanced Spontaneous Polarization by V4+ Substitution in a Lead-Free Perovskite CaMnTi2O6.

Spontaneous polarization (Ps) of novel order-disorder type lead-free ferroelectric CaMnTi2O6 was successfully enhanced by partial V4+ substitution for Ti4+. A synchrotron X-ray diffraction study revealed that the polar displacement of octahedrally coordinated (Ti, V) in CaMn(Ti1-xVx)2O6 (0 ≤ x ≤ 0.4) increases with V4+ substitution having Jahn-Teller activity owing to the d1 electronic configuration. Our magnetic study suggested the presence of antisite disorder between Ca2+ and square planar coordinated Mn2+ associated with Mn-V intermetallic charge transfer for x ≥ 0.4, resulting in decreases in spontaneous polarization and the ferroelectric-paraelectric transition temperature. This is the first report on the enhanced polarization owing to the Jahn-Teller distortion of V4+ without stereochemical Pb2+ or Bi3+.

Sequential Spin State Transition and Intermetallic Charge Transfer in PbCoO3.

Spin state transitions and intermetallic charge transfers can essentially change material structural and physical properties while excluding external chemical doping. However, these two effects have rarely been found to occur sequentially in a specific material. In this article, we show the realization of these two phenomena in a perovskite oxide PbCoO3 with a simple ABO3 composition under high pressure. PbCoO3 possesses a peculiar A- and B-site ordered charge distribution Pb2+Pb4+3Co2+2Co3+2O12 with insulating behavior at ambient conditions. The high spin Co2+ gradually changes to low spin with increasing pressure up to about 15 GPa, leading to an anomalous increase of resistance magnitude. Between 15 and 30 GPa, the intermetallic charge transfer occurs between Pb4+ and Co2+ cations. The accumulated charge-transfer effect triggers a metal-insulator transition as well as a first-order structural phase transition toward a Tetra.-I phase at the onset of ∼20 GPa near room temperature. On further compression over 30 GPa, the charge transfer completes, giving rise to another first-order structural transformation toward a Tetra.-II phase and the reentrant electrical insulating behavior.