Experimental study using phantom models of cerebral aneurysms and 4D-DSA to measure blood flow on 3D-color-coded images.

BACKGROUND: The current 3D-iFlow application can only measure the arrival time of contrast media through intensity values. If the flow rate could be estimated by 3D-iFlow, patient-specific hemodynamics could be determined within the scope of normal diagnostic management, eliminating the need for additional resources for blood flow rate estimation. OBJECTIVE: The aim of this study is to develop and validate a method for measuring the flow rate by data obtained from 3D-iFlow images - a prototype application in Four-dimensional digital subtraction angiography (4D-DSA). METHODS: Using phantom model and experimental circuit with circulating glycerin solution, an equation for the relationship between contrast media intensity and flow rate was developed. Applying the equation to the aneurysm phantom models, the derived flow rate was evaluated. RESULTS: The average errors between the derived flow rate and setting flow rate became larger when the glycerin flow and the X-rays from the X-ray tube of the angiography system were parallel to each other or when the measurement point included overlaps with other contrast enhanced areas. CONCLUSION: Although the error increases dependent on the imaging direction and overlap of contrast enhanced area, the developed equation can estimate the flow rate using the image intensity value measured on 3D-iFlow based on 4D-DSA.

Three-dimensional fusion imaging to assess apposition of low-profile visualized intraluminal support stent for intracranial aneurysm coiling.

Objective: To investigate on three-dimensional (3D) fusion images the apposition of low-profile visualized intraluminal support (LVIS) stents in intracranial aneurysms after treatment and assess inter-rater reliability. Materials and methods: Records of all patients with unruptured intracranial aneurysms who were treated with the LVIS stent were retrospectively accessed and included in this study. Two neurosurgeons evaluated the presence of malapposition between the vessel walls and the stent trunk (crescent sign) and the vessel wall and the stent edges (edge malappostion) on 3D fusion images. These images were high-resolution cone-beam computed tomography images of the LVIS stent fused with 3D-digital subtraction angiography images of the vessels. Associations between malapposition and aneurysm location were assessed by Fisher's exact test, and inter-rater agreement was estimated using Cohen's kappa statistic. Results: Forty consecutive patients were included. In all patients, 3D fusion imaging successfully visualized the tantalum helical strands and the closed-cell structure of the nitinol material of the low-profile visualized intraluminal support. A crescent sign was observed in 27.5 % and edge malapposition in 47.5 % of the patients. Malapposition was not significantly associated with location (p = 0.23 crescent sign, p = 0.07 edge malapposition). Almost perfect (κ = 0.88) and substantial (κ = 0.76) agreements between the two raters were found for the detection of crescent signs and edge appositions, respectively. Conclusions: 3D fusion imaging provided clear visualization of the LVIS stent and parent arteries, and could detect malapposition with excellent inter-rater reliability. This technique may provide valuable guidance for surgeons in determining postoperative management.

Hemodynamic and morphological differences in cerebral aneurysms between before and after rupture.

OBJECTIVE: Although it has been proposed that aneurysm morphology is different after rupture, detailed research of the morphological changes using 3D imaging acquired before and after rupture has not been conducted because of the difficulty of data collection. Similarly, hemodynamic changes due to morphological alterations after rupture have not been analyzed. The aim of this study was to investigate the changes in morphology and hemodynamics observed after aneurysm rupture. METHODS: For 21 cerebral aneurysms (21 patients) that ruptured during observation, 3D geometry of the aneurysms and parent arteries were reconstructed based on the angiographic images before and after their rupture. In addition, using the reconstructed geometry, blood flow was simulated by computational fluid dynamics (CFD) analysis. Morphological and hemodynamic parameters were calculated both before and after rupture, and their changes from before to after were compared. RESULTS: In the morphological parameters, statistically significantly higher values were observed after rupture in height (before: 5.5 ± 2.1 mm, after: 6.1 ± 2.0 mm; p < 0.0001), aspect ratio (p = 0.002), aneurysm volume (p = 0.04), and undulation index (p = 0.005). In terms of hemodynamic changes, the mean normalized wall shear stress (NWSS) decreased significantly (before: 5.4 × 10-1 ± 2.9 × 10-1, after: 4.4 × 10-1 ± 2.8 × 10-1; p < 0.001) as well as the other NWSS parameters, including maximum and minimum NWSS, which were associated with stagnant flow due to the morphological changes after rupture. CONCLUSIONS: Aneurysm morphology was found to change after rupture into an elongated and irregular geometry, accompanied by an increase in aneurysm volume. These morphological changes were also associated with statistically significant hemodynamic alterations that produced low wall sheer stress by stagnant flow. The authors' results also provide the opportunity to explore and develop a risk evaluation method for aneurysm rupture based on prerupture morphology and hemodynamics by further exploration in this direction.

Virtual coil images can optimize the visualization of the neckline of intracranial aneurysms during coil embolization: A technical note.

Background: During coil embolization of intracranial aneurysms, the aneurysmal neck needs to be evaluated because coil protrusion into the parent artery may lead to ischemic complications. However, the neck cannot always be clearly visualized due to the limitation of the angiography system and due to the structure of the aneurysm. As a visual aid, we propose a color-coded fusion imaging method that generates "virtual coil" images using preoperative three-dimensional digital subtraction angiography (3D-DSA) images. Case Description: Coil embolization for intracranial aneurysms was performed using the working angles determined from the preoperative 3D-DSA. The aneurysms were located at the middle cerebral artery, anterior communicating artery (A-com), and posterior communicating artery (P-com). The A-com and P-com aneurysms were recurrent. During the later phase of the procedure, physicians could not judge whether coils protruded into the parent artery on two-dimensional digital subtraction angiography (2D-DSA) images because an optimal working angle could not be realized. Virtual coil images were displayed on the angiography system's monitor to show the expected completed embolization, which could be compared to the current 2D-DSA images as a visual aid. Conclusion: Virtual coil images can provide visual aid to the treating physician during aneurysm coil embolization, which is useful when an accurate working angle cannot be reached.

Intraoperative Cone-Beam Computed Tomography Assessment of Spinal Pedicle Screws Placement Precision Is in Full Agreement with Postoperative Computed Tomography Assessment.

OBJECTIVE: To assess agreement between pedicle screw placement evaluated on postoperative computed tomography (CT) and on intraoperative cone-beam CT (CBCT) and compare procedure characteristics when using first-generation and second-generation robotic C-arm systems in the hybrid operating room. METHODS: All patients who received pedicle screws for spinal fusion at our institution between June 2009 and September 2019 and underwent intraoperative CBCT and postoperative CT were included. The CBCT and CT images were reviewed by 2 surgeons to assess the screw placement using the Gertzbein-Robbins and the Heary classifications. Intermethod agreement of screw placement classifications as well as interrater agreement were assessed using Brennan-Prediger and Gwet agreement coefficients. Procedure characteristics using first-generation and second-generation generation robotic C-arm systems were compared. RESULTS: Fifty-seven patients were treated with 315 pedicle screws at thoracic, lumbar, and sacral levels. No screw had to be repositioned. On CBCT, accurate placement was found for 309 screws (98.1%) using the Gertzbein-Robbins classification and 289 (91.7%) using the Heary classification and on CT, these were 307 (97.4%) and 293 (93.0%), respectively. Intermethod between CBCT and CT and interrater agreements between the 2 raters were almost perfect (>0.90) for all assessment. There were no significant differences in mean radiation dose (P = 0.83) and fluoroscopy time (P = 0.82), but length of surgery using the second-generation system was estimated at 107.7 minutes (95% confidence interval, 31.9-183.5 minutes; P = 0.006) shorter. CONCLUSIONS: Intraoperative CBCT provides accurate assessment of pedicle screw placement and enables intraoperative repositioning of misplaced screws.

An AI-Powered Clinical Decision Support System to Predict Flares in Rheumatoid Arthritis: A Pilot Study.

Treat-to-target (T2T) is a main therapeutic strategy in rheumatology; however, patients and rheumatologists currently have little support in making the best treatment decision. Clinical decision support systems (CDSSs) could offer this support. The aim of this study was to investigate the accuracy, effectiveness, usability, and acceptance of such a CDSS-Rheuma Care Manager (RCM)-including an artificial intelligence (AI)-powered flare risk prediction tool to support the management of rheumatoid arthritis (RA). Longitudinal clinical routine data of RA patients were used to develop and test the RCM. Based on ten real-world patient vignettes, five physicians were asked to assess patients' flare risk, provide a treatment decision, and assess their decision confidence without and with access to the RCM for predicting flare risk. RCM usability and acceptance were assessed using the system usability scale (SUS) and net promoter score (NPS). The flare prediction tool reached a sensitivity of 72%, a specificity of 76%, and an AUROC of 0.80. Perceived flare risk and treatment decisions varied largely between physicians. Having access to the flare risk prediction feature numerically increased decision confidence (3.5/5 to 3.7/5), reduced deviations between physicians and the prediction tool (20% to 12% for half dosage flare prediction), and resulted in more treatment reductions (42% to 50% vs. 20%). RCM usability (SUS) was rated as good (82/100) and was well accepted (mean NPS score 7/10). CDSS usage could support physicians by decreasing assessment deviations and increasing treatment decision confidence.

Diagnostic performance of intraoperative cone beam computed tomography compared with postoperative magnetic resonance imaging for detecting hemorrhagic transformation after endovascular treatment following large vessel occlusion.

OBJECTIVES: Early detection of hemorrhagic transformation (HT) in patients with large vessel occlusion (LVO) after endovascular treatment is important for postoperative patient management. We investigated the diagnostic performance of intraoperative cone beam computed tomography (CBCT) with reference standard magnetic resonance imaging (MRI) for detecting HT. MATERIALS AND METHODS: Consecutive patients with LVO treated by endovascular treatment who underwent intraoperative CBCT and postoperative MRI were included. Two observers evaluated all images for the presence of HT. Sensitivity and specificity for detecting HT were calculated with MRI as reference standard. The observers classified HT according to the European Cooperative Acute Stroke Study (ECASS). Inter-method and inter-rater agreement for the detection of HT and for the ECASS classification were assessed using kappa or weighted Brennan-Prediger (wBP) statistics. RESULTS: Images of 106 procedures (94 for anterior circulation) were analyzed. The sensitivity and specificity for detecting HT on CBCT were 0.77 and 0.83, respectively, for all procedures and 0.83 and 0.8, respectively, for anterior circulation. The inter-method agreement for HT detection (κ = 0.63 overall, κ = 0.69 anterior circulation) and ECASS classification (wBP = 0.67 overall, wBP = 0.77 anterior circulation) were substantial. The inter-rater agreement for HT detection (κ = 0.87 overall, κ = 0.85 anterior circulation) and for ECASS classification (wBP = 0.95 overall, wBP = 0.92 anterior circulation) were almost perfect. CONCLUSIONS: The diagnostic performance of CBCT for the detection of HT in stroke patients treated for LVO was acceptable with excellent inter-rater agreement. Intraoperative CBCT may be useful to trigger early interventions if HT is detected, although detailed classifications of HT may be difficult.

Intraoperative cone-beam CT with metal artifact reduction for assessment of the electrode position and the intracranial structures during deep brain stimulation procedure.

BACKGROUND: In deep brain stimulation (DBS) for Parkinson's disease (PD), the clinical outcome largely depends on the appropriate position of the electrode implanted in the targeted structure. In intraoperative cone-beam computed tomography (CT) performed for the evaluation of the electrode position, the metal artifact induced by the implanted electrode can prevent the precise localization of the electrode. Metal artifact reduction (MAR) techniques have been recently developed that can dramatically improve the visualization of objects by reducing metal artifacts after performing cone-beam CT. Hence, in this case series, we attempted to clarify the usefulness and accuracy of intraoperative cone-beam CT with MAR (intraCBCTwM) by comparing with both intraoperative cone-beam CT without MAR (intraCBCTwoM) and conventional postoperative CT (post-CT) for the assessment of the implanted electrode position and the intracranial structures during DBS procedures. METHODS: Between November 2019 and December 2020, 10 patients with PD who underwent DBS at our institution were recruited, and the images of 9 patients (bilateral: n = 8, unilateral: n = 1) were analyzed. The artifact index (AI) in intraCBCTwM or intraCBCTwoM, and conventional post-CT were retrospectively assessed using the standard deviation of the region-of-interest around the implanted electrodes and background noise. Additionally, the Euclidean distances gap of electrode tip based on post-CT in each fusion image was compared between intraCBCTwM and intraCBCTwoM. RESULTS: The AI was significantly lower in intraCBCTwM than in intraCBCTwoM (P < 0.01). The mean Euclidean distance between the tip of the electrode in intraCBCTwM and in post-CT was significantly shorter compared to that in intraCBCTwoM (P < 0.05). CONCLUSIONS: The results reported here suggest that intraCBCTwM is a more useful and accurate method than intraCBCTwoM to assess the implanted electrode position and intracranial structures during DBS.

Applying Machine Learning to Determine 25(OH)D Threshold Levels Using Data from the AMATERASU Vitamin D Supplementation Trial in Patients with Digestive Tract Cancer.

Some controversy remains on thresholds for deficiency or sufficiency of serum 25-hydroxyvitamin D (25(OH)D) levels. Moreover, 25(OH)D levels sufficient for bone health might differ from those required for cancer survival. This study aimed to explore these 25(OH)D threshold levels by applying the machine learning method of multivariable adaptive regression splines (MARS) in post hoc analyses using data from the AMATERASU trial, which randomly assigned Japanese patients with digestive tract cancer to receive vitamin D or placebo supplementation. Using MARS, threshold 25(OH)D levels were estimated as 17 ng/mL for calcium and 29 ng/mL for parathyroid hormone (PTH). Vitamin D supplementation increased calcium levels in patients with baseline 25(OH)D levels ≤17 ng/mL, suggesting deficiency for bone health, but not in those >17 ng/mL. Vitamin D supplementation improved 5-year relapse-free survival (RFS) compared with placebo in patients with intermediate 25(OH)D levels (18−28 ng/mL): vitamin D, 84% vs. placebo, 71%; hazard ratio, 0.49; 95% confidence interval, 0.25−0.96; p = 0.04. In contrast, vitamin D supplementation did not improve 5-year RFS among patients with low (≤17 ng/mL) or with high (≥29 ng/mL) 25(OH)D levels. MARS might be a reliable method with the potential to eliminate guesswork in the estimation of threshold values of biomarkers.

Extraction of patient-specific boundary conditions from 4D-DSA and their influence on CFD simulations of cerebral aneurysms.

We developed a new technique for extracting patient-specific inflow conditions, such as the pulse cycle duration and blood flow velocity, from four-dimensional digital subtraction angiography images and experimentally examined its validity. The maximum error between the values extracted by the technique and measured values was 14.3%. We performed blood flow simulations and calculated representative haemodynamic parameters. The maximum differences between the parameters obtained using general and patient-specific inflow conditions were approximately 400%, 150%, and 50% for the velocity, normalised wall shear stress, and pressure loss coefficient, respectively. These results indicate that patient-specific conditions are critical for accurately reproducing aneurysmal haemodynamics.

Role of patient-specific blood properties in computational fluid dynamics simulation of flow diverter deployed cerebral aneurysms.

BACKGROUND: Hemodynamics and their clinical outcome of cerebral aneurysms treated with flow diverter (FD) stents have thus far been investigated using computational fluid dynamics (CFD) simulations. Although human blood is characterized as a non-Newtonian patientspecific fluid, non-patient-specific blood properties (PSBP) were applied in most extant studies. OBJECTIVE: To investigate the hemodynamic effects caused by PSBPs in aneurysms treated with FD stents. METHODS: We measured blood properties (density and viscosity) for 12 patients who underwent FD stent deployment. We conducted CFD simulations with the measured PSBPs and non-PSBPs quoted from previous studies. The average blood flow velocity and wall shear stress within the aneurysms were calculated and two simulation patterns were compared. RESULTS: The velocity and wall shear stress changed by 2.93% and 3.16% on average, respectively, without an FD stent deployed. Conversely, with the FD stents deployed, the change rates increased to 11.1% and 9.06% on average, respectively. CONCLUSIONS: The change in hemodynamic parameters if PSBPs are considered, may not be negligible when conducting CFD simulations of FD stent deployed aneurysms To obtain an adequate hemodynamic environment for cerebral aneurysms with FD stents deployed, it is recommended to use PSBPs for CFD simulations.

Agreement between single plane and biplane derived angiographic fractional flow reserve in patients with intermediate coronary artery stenosis.

Fractional flow reserve (FFR) is often used to evaluate the physiological severity of intermediate coronary stenoses, but less-invasive assessment methods are desirable. We evaluated the feasibility of angiographic FFR (angioFFR) calculated from two projections acquired simultaneously by a biplane C-arm system and angioFFR calculated from two projections acquired independently by one plane of the same biplane C-arm system. AngioFFR was validated against FFR in terms of detection of hemodynamically relevant coronary artery stenoses. Twenty-two Patients who underwent angiography and FFR for coronary artery disease were included. We used a non-commercial prototype to calculate biplane angioFFR for 22 vessels (19 LAD, 1 LCx, 2 RCA) and single plane angioFFR for 17 of the same 22 vessels. FFR < 0.8 was measured in 8 vessels. The Pearson correlation coefficients with FFR were 0.55 for single plane angioFFR and 0.61 for biplane angioFFR and the diagnostic accuracies were 88% (95% CI 73-100%) for single plane angioFFR and 86% (95% CI 72-100%) for biplane angioFFR. Bland-Altman plots revealed that compared with FFR, the limits of agreement for single plane angioFFR were - 0.07 to 0.19 (mean difference 0.06, p = 0.002) and the limits of agreement for biplane FFR were - 0.09 to 0.15 (mean difference 0.03, p = 0.03). In conclusion, angioFFR calculated from single or biplane acquisitions by a biplane C-arm is feasible and may evolve to a tool for less invasive imaging-based assessment of myocardial ischemia.

Development of a Virtual Stent Deployment Application to Estimate Patient-Specific Braided Stent Sizes.

A virtual stent deployment application was developed to estimate the appropriate and patient-specific size of a braided stent for patients who undergo endovascular treatment for intracranial aneurysms. Comparing between the simulated deployed and the actual stents, we evaluated the accuracy of the simulation results. Our results indicated that lengths of the virtual and actual stents matched well despite the actual stent being affected by a geometrical change of the parent artery.Clinical Relevance-Surgeons need to be well-experienced to select an appropriate braided stent size for endovascular treatment of intracranial aneurysms, because the actual length of the deployed stent changes. This simulation will be helpful to make tailor-made surgical planning regardless of the surgeons' individual skill level.

Computational fluid dynamic analysis of the initiation of cerebral aneurysms.

OBJECTIVE: Relationships between aneurysm initiation and hemodynamic factors remain unclear since de novo aneurysms are rarely observed. Most previous computational fluid dynamics (CFD) studies have used artificially reproduced vessel geometries before aneurysm initiation for analysis. In this study, the authors investigated the hemodynamic factors related to aneurysm initiation by using angiographic images in patients with cerebral aneurysms taken before and after an aneurysm formation. METHODS: The authors identified 10 cases of de novo aneurysms in patients who underwent follow-up examinations for existing cerebral aneurysms located at a different vessel. The authors then reconstructed the vessel geometry from the images that were taken before aneurysm initiation. In addition, 34 arterial locations without aneurysms were selected as control cases. Hemodynamic parameters acting on the arterial walls were calculated by CFD analysis. RESULTS: In all de novo cases, the aneurysmal initiation area corresponded to the highest wall shear stress divergence (WSSD point), which indicated that there was a strong tensile force on the arterial wall at the initiation area. The other previously reported parameters did not show such correlations. Additionally, the pressure loss coefficient (PLc) was statistically significantly higher in the de novo cases (p < 0.01). The blood flow impact on the bifurcation apex, or the secondary flow accompanied by vortices, resulted in high tensile forces and high total pressure loss acting on the vessel wall. CONCLUSIONS: Aneurysm initiation may be more likely in an area where both tensile forces acting on the vessel wall and total pressure loss are large.

Clinical outcomes of procedures combining endovascular embolization with a direct surgical approach in a hybrid operating room for the treatment of refractory dural arteriovenous fistulas.

BACKGROUND: We reviewed the clinical outcomes of a procedure that combines endovascular embolization and a direct surgical approach in a hybrid operating room (OR) for the treatment of refractory dural arteriovenous fistulas (dAVFs). METHODS: All patients with intracranial dAVFs who underwent a procedure combining endovascular embolization and direct surgical approach with biplane angiography or a robotic C-arm system in a hybrid OR between February 2004 and June 2020 were considered. Borden grading, occlusion rate, pre-and post-operative modified Rankin Scale (mRS) scores, and complications were retrospectively investigated. The pre-and postoperative mRS scores were compared using the Wilcoxon signed-ranks test. RESULTS: We evaluated 14 arteriovenous fistulas (AVFs) in consecutive 13 patients. Of these, ten AVFs were previously treated with endovascular embolization, ten were located in the transverse-sigmoid sinus, and four in the cortical vein. The Borden grade was II in two AVFs and III in 12 AVFs. Immediate occlusion of the AVF was achieved in 13 AVFs, and gradual occlusion was observed in one case. The median preoperative mRS was 1 (0-3), whereas the median postoperative mRS was 0 (0-1) which indicated marked improvement (P = 0.006). Complications including postoperative transient visual disturbance and intraprocedural extravasation were observed in only two cases. CONCLUSION: The combination of endovascular embolization and direct surgical approach in a hybrid OR could achieve sufficient occlusion of refractory AVFs with acceptable complication rates and improved symptoms.

Hemodynamic and Morphologic Factors Related to Coil Compaction in Basilar Artery Tip Aneurysms.

OBJECTIVE: Coil compaction is directly related to the degree of cerebral aneurysmal recanalization. The degree of recanalization (DoR) was quantified by measuring the volume vacated by coil deformation. The purpose of this study was to clarify the hemodynamic and morphologic factors associated with coil compaction. METHODS: Computational fluid dynamics simulations were performed on 28 middle-size (5-10 mm) unruptured basilar artery tip aneurysms. The DoR was measured by comparing the coil mass shape obtained from three-dimensional digital subtraction angiography data immediately after coil embolization and again within 1-2 years of follow-up. Deployed coils were modeled using a virtual coiling technique for computational fluid dynamics simulations. Hemodynamic and morphologic factors to predict the DoR were derived using multiple linear regression. RESULTS: Aneurysmal neck area, the maximum pressure generated on the neck surface after coil embolization, and the high-pressure position on the neck surface predicted DoR with statistic significance (P < 0.001, P < 0.001, P = 0.004, respectively). The DoR tended to increase when the neck area was large, the pressure generated on the coils was high, and the high-pressure position was close to the center of the neck surface. The volume embolization ratio was not statistically relevant for the DoR in the cases of this study. CONCLUSIONS: Coil compaction occurs in cerebral aneurysms with a wide neck, high pressure generated on the coils, and high pressure in the center of the neck surface. Establishing the DoR can contribute to the prediction of recanalization after coil embolization.

Visualization of extracranial-intracranial bypass in moyamoya patients using intraoperative three-dimensional digital subtraction angiography with intravenous contrast injection and robotic C-arm: patient series.

BACKGROUND: The authors describe a noninvasive intraoperative imaging strategy of three-dimensional (3D) digital subtraction angiography (DSA) with intravenous (IV) contrast injection, using indocyanine green (ICG) as a test bolus, during extracranial-intracranial (EC-IC) bypass surgery for moyamoya disease. OBSERVATIONS: Four patients underwent EC-IC bypass surgery in a hybrid operating room. During the surgery, bypass patency was verified using ICG videoangiography and Doppler ultrasonography. After skin closure, the patients under anesthesia underwent IV 3D-DSA with a robotic C-arm in which the scan delay time for the 3D-DSA scan was estimated from the arrival time of ICG during the ICG videoangiography. One day after the surgery, the patients underwent magnetic resonance angiography (MRA). The IV 3D-DSA images were retrospectively compared with those obtained with other modalities. Good bypass patency was confirmed on IV 3D-DSA, ICG videoangiography, Doppler ultrasonography, and postoperative MRA in all cases. The delay time determined using ICG videoangiography as a test bolus resulted in IV 3D-DSA with adequate image quality, allowing assessment of the spatial relationships between the vessels and anastomoses from all directions. LESSONS: To evaluate bypass patency and anatomical relationships immediately after EC-IC bypass surgery, IV 3D-DSA may be a useful modality. ICG videoangiography can be used to determine the scan delay time.

Flow Diverter Apposition in Patients with Large or Giant Intracranial Aneurysms Evaluated on Three-Dimensional Fusion Images Acquired by High-Resolution Cone-Beam Computed Tomography and Digital Subtraction Angiography.

OBJECTIVE: To investigate flow diverter (FD) apposition on fused images acquired by high-resolution cone-beam computed tomography (CBCT) and 3-dimensional (3D) digital subtraction angiography. METHODS: Patients with large or giant internal carotid artery aneurysms treated with Pipeline FDs who underwent CBCT imaging at our institution between October 2016 and May 2019 were included. Two neurosurgeons measured the maximum malapposition between FDs and vessel walls on 3D fusion images of high-resolution CBCT images displaying the FD and 3D digital subtraction angiography images displaying the vessels. Associations between the relative malapposition, FD diameter, vessel diameter, proximal and distal vessel diameter discrepancy, and siphon angle were evaluated by linear regression analysis. Inter-rater and intermethod (3D and 2D image) agreements of the malapposition measurements were assessed by Bland-Altman analysis and by interclass correlation coefficients. RESULTS: Images of 2 patients were excluded because of image artifacts or fusion errors, and 3D fusion images were acquired in the remaining 26 patients. Our results did not suggest that relative malapposition was associated with vessel diameter (P = 0.12), vessel diameter discrepancy (P = 0.60), or syphon angle (P = 0.34), but relative malapposition increased by an estimated 13% (95% confidence interval: 4%-23%, P = 0.006) for each 1 mm increase in FD diameter. Inter-rater and intermethod agreements for apposition measurements were excellent and good, respectively. CONCLUSIONS: Three-dimensional fusion images provided clear visualization of structures of both the stent and parent artery with excellent diagnostic reliability. Careful deployment may be needed for FDs with larger diameters, as they tended to have larger relative malapposition.

Comparison of Clinical Outcomes After Stent-Assisted Coiling with 3 Types of Self-Expanding Laser-Cut Stents in Patients with Wide-Necked Intracranial Aneurysms.

OBJECTIVE: We report the clinical outcomes of stent-assisted coiling for wide-necked intracranial aneurysms using 3 low-profile laser-cut stents and compare the results according to stent type. METHODS: All patients treated with stent-assisted coiling for their intracranial aneurysms at our hospital between July 2010 and September 2019 were reviewed. We selected patients with Enterprise, Neuroform EZ, or Neuroform Atlas stents who underwent imaging follow-up and investigated aneurysm and stent features, stent-related complications, recanalization, and retreatment rates. We compared the retreatment risk among the patients treated with the 3 stent types using Kaplan-Meier survival analysis and Cox regression analysis. RESULTS: We evaluated 364 consecutive cases (103 Enterprise, 105 Neuroform EZ, and 156 Neuroform Atlas stents). Neuroform Atlas was more frequently used in distal vessels: 8 (7.8%) Enterprise, 2 (1.9%) Neuroform EZ, and 41 (26.3%) Neuroform Atlas cases, respectively. The median follow-up durations were 6.49, 4.91, and 1.24 years for the Enterprise, Neuroform EZ, and Neuroform Atlas cases, respectively, and retreatment was performed in 11 (10.1%), 9 (8.6%), and 6 (3.8%) cases. In the first 2 years of follow-up, the estimated retreatment risk ratios for Neuroform EZ and Neuroform Atlas with Enterprise as reference were 0.63 (95% confidence interval, 0.24-1.65; P = 0.35) and 0.54 (95% confidence interval, 0.18-1.59; P = 0.26), respectively. CONCLUSIONS: Neuroform Atlas stents were more frequently deployed in small-caliber vessels compared with the other 2 types of stents. The complication rate and retreatment risk until at least 1 year after the aneurysm treatment appeared to be similar for the 3 stent types.

4D Digital Subtraction Angiography for the Temporal Flow Visualization of Intracranial Aneurysms and Vascular Malformations.

PURPOSE: To assess the benefit and radiation dose of four-dimensional (4D) digital subtraction angiography (DSA) - a time resolved three-dimensional (3D) DSA application - to evaluate the flow and architecture of aneurysms and vascular malformations. METHODS: All patients with cerebrovascular disease were considered who underwent 4D-DSA at our institution between January 2015 and February 2016. For the aneurysm patients, we evaluated the image quality in terms of the visualization of contrast flow in the aneurysm on a 3-point scale (excellent, fair and poor). Interrater agreement between two raters was estimated using Cohen's Kappa statistics. For the shunt disease patients, the additional information obtained from the 4D-DSA was described for each disease. The median radiation dose and volume of contrast medium required for the acquisitions were estimated. RESULTS: A total of 173 patients underwent 4D-DSA; 126 intracranial aneurysms, 10 arteriovenous malformations (AVM), 15 dural arteriovenous fistula (dAVF) and 22 other diseases. For aneurysm patients, excellent and fair visualization of the intra-aneurysmal flow was observed in 27.7%, 72.3%, and excellent (κ = 0.9) agreement between the raters was found. For AVM and dAVF patients, 4D-DSA clarified the complex vasculature by viewing the discrete time phase of contrast filling. Median radiation dose for intracranial lesions was 79.6 mGy for 6s 4D-DSA, and 175 mGy for 12s 4D-DSA. The median amount of contrast medium used was 18.0 ml for 6s 4D-DSA and 21.0 ml for 12s 4D-DSA. CONCLUSIONS: 4D-DSA provided additional information regarding intra-aneurysmal flow and contributed to detect different component of nidus or shunt points.