A synergistic approach combining computational fluid dynamics simulation with hydrolysis-acidification for dye wastewater treatment.

Wastewater treatment is effectively conducted using anaerobic biological methods. Nevertheless, the efficiency of these methods can be hindered by challenges like short-circuits and dead zones, particularly in treating persistent contaminants. This work utilized computational fluid dynamics (CFD) simulations to enhance water distribution, ensuring uniform interactions between solid and liquid phases, and thus mitigating issues related to short-circuits and dead zones. Such enhancements notably amplified the anaerobic biological process's efficiency. Furthermore, dye biodegradability was improved through the application of the hydrolysis acidification technique. Optimal hydraulic retention time for the hydrolysis-acidification reactor, established at 9 h, was determined via sludge cultivation and domestication for stable operation. During stable operation, an elevation in effluent volatile fatty acids was observed, alongside a COD removal rate fluctuating between 15% and 29%. Approximately 50% was noted as the rate of color removal. Simultaneously, a noticeable decrease in effluent pH occurred, with total nitrogen removal approximating 8%. An estimated BOD5/COD ratio of 0.32 was recorded. The incorporation of microbial agents led to an enhanced COD removal, ranging from 28% to 33%, thereby stabilizing the effluent BOD5/COD ratio at around 0.35. This research highlights the advantages of optimizing water distribution in anaerobic reactors, particularly when combined with hydrolysis-acidification techniques, effectively addressing issues of short-circuits and dead zones.

Innovative treatment of industrial effluents through combining ferric iron and attapulgite application.

The escalation of industrial activities has escalated the production of pharmaceutical and dyeing effluents, raising significant environmental issues. In this investigation, a hybrid approach of Fenton-like reactions and adsorption was used for deep treatment of these effluents, focusing on effects of variables like hydrogen peroxide concentration, catalyst type, pH, reaction duration, temperature, and adsorbent quantity on treatment effectiveness, and the efficacy of acid-modified attapulgite (AMATP) and ferric iron (Fe(III))-loaded AMATP (Fe(III)-AMATP) was examined. Optimal operational conditions were determined, and the possibility of reusing the catalysts was explored. Employing Fe3O4 as a heterogeneous catalyst and AMATP for adsorption, CODCr was reduced by 78.38-79.14%, total nitrogen by 71.53-77.43%, and phosphorus by 97.74-98.10% in pharmaceutical effluents. Similarly, for dyeing effluents, Fe(III)-AMATP achieved 79.87-80.94% CODCr, 68.59-70.93% total nitrogen, and 79.31-83.33% phosphorus reduction. Regeneration experiments revealed that Fe3O4 maintained 59.48% efficiency over three cycles, and Fe(III)-AMATP maintained 62.47% efficiency over four cycles. This work offers an economical, hybrid approach for effective pharmaceutical and dyeing effluent treatment, with broad application potential.

A low-cost and sustainable solution for nitrate removal from secondary effluent: Macroporous ion exchange resin treatment.

Macroporous ion exchange resin has excellent selectivity to nitrogen (N), phosphorus (P) and partially soluble refractory organic compounds contained in the secondary effluent of wastewater treatment plants (WWTP). In this study, macroporous ion exchange resins were chosen as an alternative to single biochemical nitrogen removal processes. Various conditions were examined to optimize adsorption performance, and the adsorption mechanism was explored through isotherm fitting, thermodynamic parameter calculation, and kinetic analysis. The experiment demonstrated that the resin exhibited strong selectivity for nitrate (NO3-) and achieved an equilibrium adsorption amount of 9.8924 mg/g and an equilibrium adsorption time of 60 min at 25 °C. The resin denitrification pilot plant demonstrated stable operation for two months and achieved COD<20 mg/L, TN < 1.5 mg/L, and NH4+-N<0.5 mg/L. The removal rates of COD, TP, NH4+-N, NO3--N, and TN were 41.65%, 42.96%, 55.37%, 91.8%, and 90.81%, respectively. After the resin was regenerated, the removal rates of NO3--N, TN and the regeneration recovery rate were above 90%. Through cost analysis, the treatment cost of the pilot plant is only 0.104 $/m3. This study presents a practical, low-cost, and efficient treatment method for the deep treatment of secondary effluent from WWTP in practical engineering, providing new ideas and theoretical guidance.

Recent Research Advances in Nano-Based Drug Delivery Systems for Local Anesthetics.

From a clinical perspective, local anesthetics have rather widespread application in regional blockade for surgery, postoperative analgesia, acute/chronic pain control, and even cancer treatments. However, a number of disadvantages are associated with traditional local anesthetic agents as well as routine drug delivery administration ways, such as neurotoxicity, short half-time, and non-sustained release, thereby limiting their application in clinical practice. Successful characterization of drug delivery systems (DDSs) for individual local anesthetic agents can support to achieve more efficient drug release and prolonged duration of action with reduced systemic toxicity. Different types of DDSs involving various carriers have been examined, including micromaterials, nanomaterials, and cyclodextrin. Among them, nanotechnology-based delivery approaches have significantly developed in the last decade due to the low systemic toxicity and the greater efficacy of non-conventional local anesthetics. Multiple nanosized materials, including polymeric, lipid (solid lipid nanoparticles, nanostructured lipid carriers, and nanoemulsions), metallic, inorganic non-metallic, and hybrid nanoparticles, offer a safe, localized, and long-acting solution for pain management and tumor therapy. This review provides a brief synopsis of different nano-based DDSs for local anesthetics with variable sizes and structural morphology, such as nanocapsules and nanospheres. Recent original research utilizing nanotechnology-based delivery systems is particularly discussed, and the progress and strengths of these DDSs are highlighted. A specific focus of this review is the comparison of various nano-based DDSs for local anesthetics, which can offer additional indications for their further improvement. All in all, nano-based DDSs with unique advantages provide a novel direction for the development of safer and more effective local anesthetic formulations.

Enhanced denitrification performance of granular sludge for the treatment of waste brine from ion exchange resin process.

Ion exchange resin process is a widely used process in wastewater treatment plants, but its waste brine is characterized by high salinity and nitrate concentration, leading to costly treatment. This study innovatively explored the use of an up-flow anaerobic sludge bed (USB) for the treatment of waste brine from ion exchange resin process, following a pilot-scale ion exchange resin process. Specifically, the D890 ion exchange resin was employed for nitrate removal from secondary effluent, with resin regeneration using 4% NaCl solution. The USB was inoculated with anaerobic granular sludge and acclimated under various single-factor conditions, which revealed the optimal pH range of 6.5-9, salt concentration of 2%, hydraulic retention time of 12 h, C/N ratio of 3.3, and up-flow velocity of 1.5 m/h for reactor operation. This study provides a novel approach for the cost-effective treatment of waste brine from ion exchange resin process. The study found that the denitrification efficiency was highest when the NO3--N concentration was around 200 mg/L, with NO3--N and TN removal rates exceeding 95% and 90%, respectively, under optimal operating conditions. Characterization of the granular sludge during different phases of the operation revealed a significant increase in proteobacteria and gradually became the dominant species over time. This study presents a novel, cost-effective approach to treat waste brine from ion exchange resin process, and the long-term stable operation of the reactor offers a reliable option for resin regeneration wastewater treatment.

Feasibility and optimization of a novel upflow denitrification reactor using denitrifying granular sludge for nitric acid pickling wastewater treatment.

Stainless steel is highly valued for its superior resistance to corrosion. However, the pickling process involved in stainless steel production generates abundant NO3--N, causing health and environmental risks. To address this issue, this study proposed a novel solution utilizing an up-flow denitrification reactor and denitrifying granular sludge for treating NO3--N pickling wastewater under high NO3--N loading. It was found that, the denitrifying granular sludge exhibited stable denitrification performance with the highest denitrification rate of 2.79 gN/(gVSS·d) and average removal rates of NO3--N and TN of 99.94% and 99.31%, respectively, under optimal operating conditions of pH 6-9, temperature 35 °C, C/N ratio 3.5, hydraulic retention time (HRT) 11.1 h and ascending flow rate 2.75 m/h. This process reduced carbon source usage by 12.5-41.7% as compared to traditional denitrification methods. These findings demonstrate the efficacy of combining granular sludge and an up-flow denitrification reactor for treating nitric acid pickling wastewater.

Cingulate cGMP-dependent protein kinase I facilitates chronic pain and pain-related anxiety and depression.

ABSTRACT: Patients with chronic pain often experience exaggerated pain response and aversive emotion, such as anxiety and depression. Central plasticity in the anterior cingulate cortex (ACC) is assumed to be a critical interface for pain perception and emotion, which has been reported to involve activation of NMDA receptors. Numerous studies have documented the key significance of cGMP-dependent protein kinase I (PKG-I) as a crucial downstream target for the NMDA receptor-NO-cGMP signaling cascade in regulating neuronal plasticity and pain hypersensitivity in specific regions of pain pathway, ie, dorsal root ganglion or spinal dorsal horn. Despite this, whether and how PKG-I in the ACC contributes to cingulate plasticity and comorbidity of chronic pain and aversive emotion has remained elusive. Here, we uncovered a crucial role of cingulate PKG-I in chronic pain and comorbid anxiety and depression. Chronic pain caused by tissue inflammation or nerve injury led to upregulation of PKG-I expression at both mRNA and protein levels in the ACC. Knockdown of ACC-PKG-I relieved pain hypersensitivity as well as pain-associated anxiety and depression. Further mechanistic analysis revealed that PKG-I might act to phosphorylate TRPC3 and TRPC6, leading to enhancement of calcium influx and neuronal hyperexcitability as well as synaptic potentiation, which results in the exaggerated pain response and comorbid anxiety and depression. We believe this study sheds new light on the functional capability of ACC-PKG-I in modulating chronic pain as well as pain-associated anxiety and depression. Hence, cingulate PKG-I may represent a new therapeutic target against chronic pain and pain-related anxiety and depression.

Novel thermodynamic mechanisms of co-conditioning with polymeric aluminum chloride and polyacrylamide for improved sludge dewatering: A paradigm shift in the field.

This study investigated the combined effects of polymeric aluminum chloride (PAC) and polyacrylamide (PAM) on sludge dewatering, aiming to unveil underlying mechanisms. Co-conditioning with 15 mg g-1 PAC and 1 mg g-1 PAM achieved optimal dewatering, reducing specific filtration resistance (SFR) of co-conditioned sludge to 4.38 × 1012 m-1kg-1, a mere 48.1% of raw sludge's SFR. Compared with the CST of raw sludge (36.45 s), sludge sample can be significantly reduced to 17.7 s. Characterization tests showed enhanced neutralization and agglomeration in co-conditioned sludge. Theoretical calculations revealed elimination of interaction energy barriers between sludge particles post co-conditioning, converting sludge surface from hydrophilic (3.03 mJ m-2) to hydrophobic (-46.20 mJ m-2), facilitating spontaneous agglomeration. Findings explain improved dewatering performance. Based on Flory-Huggins lattice theory, connection between polymer structure and SFR was established. Raw sludge formation triggered significant change in chemical potential, increasing bound water retention capacity and SFR. In contrast, co-conditioned sludge exhibited thinnest gel layer, reducing SFR and significantly improving dewatering. These findings represent a paradigm shift, shedding new light on fundamental thermodynamic mechanisms of sludge dewatering with different chemical conditioning.

Contribution of immune cells to cancer-related neuropathic pain: An updated review.

Given that the incidence of cancer is dramatically increasing nowadays, cancer-related neuropathic pain including tumor-related and therapy-related pain gradually attracts more attention from researchers, which basically behaves as a metabolic-neuro-immune disorder with worse clinical outcomes and prognosis. Among various mechanisms of neuropathic pain, the common underlying one is the activation of inflammatory responses around the injured or affected nerve(s). Innate and adaptive immune reactions following nerve injury together contribute to the regulation of pain. On the other hand, the tumor immune microenvironment involving immune cells, as exemplified by lymphocytes, macrophages, neutrophils and dendritic cells, inflammatory mediators as well as tumor metastasis have added additional characteristics for studying the initiation and maintenance of cancer-related neuropathic pain. Of interest, these immune cells in tumor microenvironment exert potent functions in promoting neuropathic pain through different signaling pathways. To this end, this review mainly focuses on the contribution of different types of immune cells to cancer-related neuropathic pain, aims to provide a comprehensive summary of how these immune cells derived from the certain tumor microenvironment participate in the pathogenesis of neuropathic pain. Furthermore, the clarification of roles of various immune cells in different tumor immune microenvironments associated with certain cancers under neuropathic pain states constitutes innovative biology that takes the pain field in a different direction, and thereby provides more opportunities for novel approaches for the prevention and treatment of cancer-related neuropathic pain.

Efficacy of erector spinae plane block for postoperative analgesia lumbar surgery: a systematic review and meta-analysis.

OBJECTIVES: The erector spinae plane (ESP) block is a newly defined regional anesthesia technique first described in 2016. The aim of this meta-analysis is to assess the efficacy of ESP block in improving analgesia following lumbar surgery. METHODS: PubMed, EMBASE, Cochrane Library, and Web of Science were searched for randomized controlled trials (RCTs) that compared the analgesic efficacy of the ESP block with non-block care for lumbar surgery from inception 3 August 2021. The primary outcomes were postoperative opioid consumption and pain scores during the first 24 h. Postoperative pain was measured as pain at rest and on movement at postoperative 0, 4, 8, 12, and 24 h expressed on a visual analog scale (VAS), where 0 = no pain and 10 = the most severe pain. RESULTS: 11 studies involving 775 patients were included in our analysis. The use of ESP block significantly decreased 24-h opioid consumption (WMD, -8.70; 95% CI, -10.48 to -6.93; I2 = 97.5%; P < 0.001) compared with the non-block. Moreover, ESP block reduced pain scores at postoperative time-points up to 24 h. ESP block also prolonged the time to first analgesic request (WMD = 6.93; 95% CI: 3.44 to 10.43, I2 = 99.8%; P < 0.001). There was less PONV with ESP block versus non-block group (RR, 0.354; 95% CI, 0.23 to 0.56; I2 = 25.2%; P < 0.001), but no difference in pruritus. CONCLUSIONS: ESP block provides less opioid consumption and PONV, lower pain scores, and longer time to first analgesic request in patients undergoing lumbar surgery compared to general anesthesia alone.

Molecular insights into impacts of EDTMPA on membrane fouling caused by transparent exopolymer particles (TEP).

While ethylenediamine tetramethylenephosphonic acid (EDTMPA) has been emerged as a stronger chelating agent than ethylene diamine tetraacetic acid (EDTA) for fouling mitigation, and transparent exopolymer particles (TEP) is a major foulant in membrane-based water treatment process, effects of EDTMPA on TEP fouling and the underlying mechanism have been not yet studied. In this study, Flory-Huggins lattice theory was combined with density functional theory (DFT) technology to explore this subject at molecular level. Filtration experiments showed a unimodal pattern of specific filtration resistance (SFR) of TEP sample with Ca2+ concentration in range of 0-3 mM. For the TEP sample with the peak SFR value at 1.5 mM Ca2+, continuous addition of EDTMPA (from 0 to 100 mg·L-1) resulted in a sustained decrease in SFR. Energy dispersive spectroscopy (EDS) mapping characterization showed the continuing decline of calcium content in the TEP layer with increase of EDTMPA addition, indicating that EDTMPA successfully captured Ca2+ from alginate­calcium ligation (TEP), and then disintegrated the TEP structure. DFT simulation showed that Ca2+ preferentially coordinated with the terminal carboxyl groups of alginate chains to form a coordination configuration that is conducive to stretch the three-dimensional polymer network. Such a network corresponded to an extremely high SFR according to Flory-Huggins theory. EDTMPA addition caused disintegration of the coordination configuration of Ca2+ binding to terminal carboxyl groups, which further resulted in collapse and flocculation of TEP gel network structure, thus leading to a continuous SFR decrease. This work provided deep thermodynamic insights into effects of EDTMPA on TEP-associated fouling at molecular level, facilitating to better understanding and mitigation of membrane fouling.

Molecular insights into membrane fouling caused by polysaccharides with different structures in polyaluminum chloride coagulation-ultrafiltration process.

In this study, mechanisms of membrane fouling caused by polysaccharides with different molecular structures in polyaluminum chloride (PACl) coagulation-ultrafiltration (C-UF) process were explored. Carrageenan and xanthan gum were chosen for model foulants of straight chain and branched chain polysaccharides, respectively. Filtration experiments showed that, with PACl dosage of 0-5 mM, specific filtration resistance (SFR) of carrageenan and xanthan solution showed a unimodal pattern and a continuous decrease pattern, respectively. A series of experimental characterizations indicated that the different SFR pattern was closely related to structure of foulants layer. Density functional theory (DFT) calculation suggested that Al3+ preferentially coordinating with the terminal sulfonyl groups of carrageenan chains to promote gel layer formation at low PACl concentration (0.15 mM). There existed a chemical potential gap between bound water in gel layer and free water in the permeate, so that, filtration through gel layer corresponded to rather high SFR for overcoming this gap. In contrast, Al3+ coordinating with the non-terminal sulfonyl groups of carrageenan at high PACl concentration caused transition from gel layer to cake layer, leading to SFR decrease. However, xanthan gum itself can form a dense gel layer with a complex polymer network by virtue of the interlacing of main chains and branches. Al3+ coordinating with the carboxyl groups on branched chains of xanthan gum resulted in clusters of polymer chains and flocculation, corresponding to the reduced SFR. This proposed molecular-level mechanism well explained membrane fouling behaviors of polysaccharides with different molecular structure, and also facilitated to optimize C-UF process for water treatment.

Mechanistic insights into Ca-alginate gel-associated membrane fouling affected by ethylene diamine tetraacetic acid (EDTA).

While transparent exopolymer particles (TEP) is a major foulant, and ethylene diamine tetraacetic acid (EDTA) is a strong chelating agent frequently used for fouling mitigation in membrane-based water treatment processes, little has been known about TEP-associated membrane fouling affected by EDTA. This work was performed to investigate roles of EDTA addition in TEP (Ca-alginate gel was used as a TEP model) associated fouling. It was interestingly found that, TEP had rather high specific filtration resistance (SFR) of 2.49 × 1015 m-1·kg-1, and SFR of TEP solution firstly decreased and then increased rapidly with EDTA concentration increase (0-1 mM). A series of characterizations suggested that EDTA took roles in SFR of TEP solution by means of changing TEP microstructure. The rather high SFR of TEP layer can be attributed to the big chemical potential gap during filtration described by the extended Flory-Huggins lattice theory. Initial EDTA addition disintegrated TEP structure by EDTA chelating calcium in TEP, inducing reduced SFR. Continuous EDTA addition decreased solution pH, resulting into no effective chelating and accumulation of EDTA on membrane surface, increasing SFR. It was suggested that factors increasing homogeneity of TEP gel will increase SFR, and vice versa. This study revealed the thermodynamic mechanism of TEP fouling behaviors affected by EDTA, and also demonstrated the importance of EDTA dosage and pH adjustment for TEP-associated fouling control.

Effects of polysaccharides' molecular structure on membrane fouling and the related mechanisms.

Fouling behaviors of polysaccharides vary with their structure, while the mechanisms underlying this phenomenon remain unexplored. This work was carried out to explore the thermodynamic fouling mechanisms of polysaccharides with different structure. Carrageenan and xanthan gum were selected as the model polysaccharides with structure of straight and branch chains, respectively. Batch filtration experiments showed that xanthan gum solution corresponded to a more rapid flux decline trend, and specific filtration resistance (SFR) of xanthan gum (2.32 × 1015 m-1 kg-1) was over 10 times than that of carrageenan (2.21 × 1014 m-1 kg-1). It was found that, xanthan gum possessed a more disordered structure and a rather higher viscosity (15.03 mPa·s V.S. 1.98 mPa·s for carrageenan). Calculation of extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory showed higher adhesion energy of xanthan gum (-42.82 my m-2 V.S. -23.26 mJ m-2 for carrageenan). Scanning electron microscopy (SEM) analyses showed that xanthan gum gel layer had a more homogenous structure and rigid polymer backbone, indicating better mixing with water to form a gel. As verified by heating experiments, such a structure tended to contain more bound water. According to this information, Flory-Huggins lattice theory was introduced to build a bridge between polymeric structure and SFR. It was revealed that branch structure corresponded to higher chemical potential change during gel layer formation, and higher ability to carry bound water, resulting in higher filtration resistance during filtration process. This work revealed the fundamental thermodynamic mechanism of membrane fouling caused by polysaccharides with different structure, deepening understanding of membrane fouling.

Fundamental thermodynamic mechanisms of membrane fouling caused by transparent exopolymer particles (TEP) in water treatment.

While transparent exopolymer particles (TEP) has high fouling potential, its underlying fouling mechanisms have not yet been well revealed. In current work, fouling characteristics of TEP under different Ca2+ concentrations (0 to 1.5 mM) were investigated. TEP quantification and filtration tests showed that TEP contents increased with Ca2+ concentration, while TEP's specific filtration resistance (SFR) under the influence of Ca2+ concentration presented a unimodal pattern. The peak of TEP's SFR reached at Ca2+ concentration of 1 mM when SA concentration was 0.3 g·L-1. A series of characterizations suggested that microstructure transformation of TEP particles was the main contributor to the resistance variations of TEP solution. The optical microscope observation showed that above and below the critical Ca2+ concentration (1 mM when SA concentration is 0.3 g·L-1 in this study), the formed TEP existed in the form of c-TEP (average particle size is 0.24 µm) and p-TEP (average particle size is 1.05 µm), respectively. Thermodynamic analysis showed that the adhesion ability of c-TEP (-249,989 and - 303,692 kT) was more than 19 times than that of p-TEP (-12,905 kT), which would accelerate foulant layer formation. In addition, below the critical value, the increased SFR with Ca2+ concentration could be explained by integrating Flory-Huggins lattice theory with the preferential intermolecular coordination. Above the critical value, the decreased SFR can be attributed to the formation of a "large-size crack structure" cake layer from the p-TEP. This study revealed fundamental mechanisms of membrane fouling caused by TEP, greatly deepening understanding of TEP fouling, and facilitating to development of effective fouling control strategies.

[Retracted] MicroRNA­338­3p suppresses tumor growth of esophageal squamous cell carcinoma in vitro and in vivo.

Following the publication of the above article, the authors have requested that it be retracted. After having repeated some of the experiments, the authors were not able to reproduce certain of the results. Furthermore, following a further investigation in the Editorial Office, it came to light that some of the wstern blotting data shown in Fig. 3 and the tumor images in Fig. 5 were strikingly similar to those that had been submitted for publication prior to the receipt of present article. Therefore, this article has been retracted from the Journal; all the authors agree to this retraction. The Editor and the authors would like to apologize for any inconvenience caused. [the original article was published in Molecular Medicine Reports 12: 3951­3957, 2015; DOI: 10.3892/mmr.2015.3820].

Clinical analgesic efficacy of pectoral nerve block in patients undergoing breast cancer surgery: A systematic review and meta-analysis.

BACKGROUND: Breast cancer is the most commonly diagnosed cancer in women, and more than half of breast surgery patients experience severe acute postoperative pain. This meta-analysis is designed to examine the clinical analgesic efficacy of Pecs block in patients undergoing breast cancer surgery. METHODS: An electronic literature search of the Library of PubMed, EMBASE, Cochrane Library, and Web of Science databases was conducted to collect randomized controlled trials (RCTs) from inception to November 2018. These RCTs compared the effect of Pecs block in combination with general anesthesia (GA) to GA alone in mastectomy surgery. Pain scores, intraoperative and postoperative opioid consumption, time to first request for analgesia, and incidence of postoperative nausea and vomiting were analyzed. RESULTS: Thirteen RCTs with 940 patients were included in our analysis. The use of Pecs block significantly reduced pain scores in the postanesthesia care unit (weighted mean difference [WMD] = -1.90; 95% confidence interval [CI], -2.90 to -0.91; P < .001) and at 24 hours after surgery (WMD = -1.01; 95% CI, -1.64 to -0.38; P < .001). Moreover, Pecs block decreased postoperative opioid consumption in the postanesthesia care unit (WMD = -1.93; 95% CI, -3.51 to -0.34; P = .017) and at 24 hours (WMD = -11.88; 95% CI, -15.50 to -8.26; P < .001). Pecs block also reduced intraoperative opioid consumption (WMD = -85.52; 95% CI, -121.47 to -49.56; P < .001) and prolonged the time to first analgesic request (WMD = 296.69; 95% CI, 139.91-453.48; P < .001). There were no statistically significant differences in postoperative nausea and vomiting and block-related complications. CONCLUSIONS: Adding Pecs block to GA procedure results in lower pain scores, less opioid consumption and longer time to first analgesic request in patients undergoing breast cancer surgery compared to GA procedure alone.

Bronchial blocker versus double-lumen endobronchial tube in minimally invasive cardiac surgery.

BACKGROUND: To compare the therapeutic value of a bronchial blocker (BB) with a double-lumen tube (DLT) in minimally invasive cardiac surgery (MICS). METHODS: Sixty patients who underwent MICS were randomized to use either a DLT (Group D, n = 30) or a BB (Group B, n = 29; one failed was omitted). The following data were collected: time of intubation and tube localization; incidence of tube displacement; postoperative sore throat and hoarseness; time of cardiopulmonary bypass; maintenance time for SpO2 < 90% (PaCO2 < 60 mmHg); mean arterial pressure and heart rate; SpO2, PaO2, PaCO2, EtCO2, mean airway pressure, and airway peak pressure; surgeons' satisfaction with anesthesia; and short-term complications. RESULTS: The times of intubation and tube localization were significantly longer in Group B than in Group D (P < 0.05). Patients in Group B exhibited significantly lower incidence of tube displacement, postoperative sore throat, and hoarseness when compared with patients in Group D (P < 0.05). Mean arterial pressure and heart rate were significantly lower in Group B than in Group D after tracheal intubation (P < 0.05). The mean airway pressure and airway peak pressure were significantly lower in Group B than in Group D after one-lung ventilation (P < 0.05). SpO2 and PaO2 in Group B were significantly higher than in group D after cardiopulmonary bypass (P < 0.05). No short-term postoperative complications were observed in patients of Groups B and D during 3 month follow-up. CONCLUSION: BB can be a potential alternative to the conventional DLT for lung isolation in MICS. TRIAL REGISTRATION: ChiCTR1900024250, July 2, 2019.

The effectiveness of air-free warming systems on perioperative hypothermia in total hip and knee arthroplasty: A systematic review and meta-analysis.

BACKGROUND: Perioperative hypothermia is a common and serious complication during surgery. Different warming systems are used to prevent perioperative hypothermia. However, there have been no previous meta-analyses of the effectiveness of air-free warming systems on perioperative hypothermia in patients undergoing joint arthroplasty. METHODS: We systematically searched PubMed, EMBASE, Cochrane Library, and China National Knowledge Infrastructure (CNKI) databases to collect randomized controlled trials (RCTs) from inception to August 2018. These RCTs compared the effects of air-free warming with forced-air (FA) warming system in patients undergoing joint arthroplasty. Postoperative temperature, core temperature during surgery, thermal comfort, blood loss and incidence of shivering and hypothermia were analyzed. RESULTS: A total of 287 patients from 6 clinical studies were included in the analysis. In summary, there was no significant difference in the postoperative temperature (WMD -0.043, 95% CI -0.32 to 0.23, P = .758) between the air-free warming and FA warming groups. No statistical difference (WMD 0.058, 95% CI -0.10 to 0.22, P = .475) was found in core temperatures at 0 minutes during surgery between the air-free warming and FA warming groups. Furthermore, there was no statistical difference in thermal comfort, blood loss or incidence of shivering and hypothermia between the air-free warming and FA warming groups. CONCLUSIONS: Air-free warming system was as effective as FA warming system in patients undergoing joint arthroplasty.