RESUMEN
Background and Objective: The tongue mucosa often changes due to various local and systemic diseases or conditions. This study aimed to investigate whether deep learning can help detect abnormal regions on the dorsal tongue surface in patients and healthy adults. Materials and Methods: The study collected 175 clinical photographic images of the dorsal tongue surface, which were divided into 7782 cropped images classified into normal, abnormal, and non-tongue regions and trained using the VGG16 deep learning model. The 80 photographic images of the entire dorsal tongue surface were used for the segmentation of abnormal regions using point mapping segmentation. Results: The F1-scores of the abnormal and normal classes were 0.960 (precision: 0.935, recall: 0.986) and 0.968 (precision: 0.987, recall: 0.950), respectively, in the prediction of the VGG16 model. As a result of evaluation using point mapping segmentation, the average F1-scores were 0.727 (precision: 0.717, recall: 0.737) and 0.645 (precision: 0.650, recall: 0.641), the average intersection of union was 0.695 and 0.590, and the average precision was 0.940 and 0.890, respectively, for abnormal and normal classes. Conclusions: The deep learning algorithm used in this study can accurately determine abnormal areas on the dorsal tongue surface, which can assist in diagnosing specific diseases or conditions of the tongue mucosa.
Asunto(s)
Aprendizaje Profundo , Adulto , Humanos , Algoritmos , Recuerdo Mental , Mucosa BucalRESUMEN
This study aimed to develop improved multi-component beads with controlled, sustained delivery of antibiotics, such as gentamicin (GM). Antibiotic-loaded beads with rapid-release and the sustained-release system can be used for bone restoration. Single and multi-component beads were prepared by gelation using various combinations of chitosan and calcium chloride as cationic components and alginate and citric acid as anions. GM release was also controlled by crosslinking using citric acid. The optimum beads were obtained using 5% or 2% sodium alginate, 3% chitosan, and 0.1 mol/L citric acid. The beads were characterized by FTIR, TG-DTG, swelling behavior, and SEM. All GM-loaded beads revealed good antimicrobial activity. The rate and kinetics of release in the phosphate buffer solution were controlled by changing the amount of chitosan in the calcium chloride solution and using citric acid as the crosslinking agent. Crosslinked beads were prepared for the release of about 80% of the loaded drug within 24 h. The study concluded that the chitosan-alginate beads provided faster GM release but crosslinking with citric acid was efficient for sustained-release beads containing gentamicin.
RESUMEN
This work investigated the microstructure and corrosion behaviors of Ti-Sn alloys with x wt% Sn (x = 5, 10, 15, and 20) for dental applications. The microstructures of commercially pure titanium (cp-Ti) and Ti-Sn alloys were characterized by X-ray diffractometry, optical microscopy, and transmission electron microscopy. The Vickers hardness of the Ti-Sn alloys was compared to that of cp-Ti. The corrosion behaviors of Ti-Sn alloys were tested in 0.9% NaCl solution at 37 °C using open circuit potential, potentiodynamic polarization, AC impedance, and galvanic corrosion tests. Ti-Sn alloys had a hexagonal close-packed structure and their microstructures were transformed from the equiaxed structure with irregular grain boundaries to the martensitic structure as the content of Sn in Ti-Sn alloys increased by over 15 wt%. Among the sample groups, Ti-15Sn and Ti-20Sn alloys exhibited better Vickers hardness values. Ti-Sn alloys had better corrosion resistance than cp-Ti. Ti-15Sn, which showed narrow martensitic bands, exhibited the highest corrosion resistance properties in AC impedance measurements due to its higher resistance and better capacitive parameters. Among the tested groups, the galvanic coupling of Ti-15Sn with cp-Ti showed higher corrosion potentials and lower current densities, which indicates that there was higher corrosion resistance.
RESUMEN
Calcium phosphate has attracted enormous attention as a bone regenerative material in biomedical fields. In this study, we investigated the effect of microwave treatment on calcium phosphate deposited TiO2 nanoflower to improve protein adsorption. Hierarchical rutile TiO2 nanoflowers (TiNF) fabricated by a hydrothermal method were soaked in modified simulated body fluid for 3 days to induce calcium phosphate (CAP) formation, followed by exposure to microwave radiation (MW). Coating the dental implants with CAP/TiNF provides a means of improving the biological properties, as the structure, morphology, and thickness of the composites can be controlled. The composites were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), field emission transmission electron microscopy (TEM), and Fourier-transform infrared spectroscopy (FTIR), respectively. The composites were identified to be composed of aggregated nano-sized particles with sphere-like shapes, and the calcium phosphate demonstrated low crystallinity. The ability of bovine serum albumin (BSA) to adsorb on MW-treated CAP/TiNF composites was studied as a function of BSA concentration. The Sips isotherm was used to analyze the BSA adsorption on MW-treated CAP/TiNF composites. The MW-treated samples showed high protein adsorption capacity, thereby indicating their potential in various biomedical applications.
RESUMEN
Surface modification of biomedical implants is an established strategy to improve osseointegration. TiO2 nanoflowers (TNF) were deposited on a titanium substrate by hydrothermal technique followed by microwave radiation at 700 W for 5-15 min. Microwave-treated samples were analyzed by X-ray diffraction (XRD), scanning electron microscopy, and Raman spectroscopy to determine their physicochemical characteristics. The XRD and Raman results showed crystalline rutile TiO2. The surfaces of microwave-treated TNF were hydrophilic with split hierarchical structure. The Sips isotherm was used to analyze BSA adsorption on microwave treated TNF samples. The microwave treatment enhances protein adsorption capacity.
Asunto(s)
Implantes Dentales , Titanio , Adsorción , Albúminas , Microscopía Electrónica de Rastreo , Microondas , Oseointegración , Propiedades de SuperficieRESUMEN
Titanium and its alloys are widely used in biomedical devices, e.g. implants, due to its biocompatibility and osseointegration ability. In fact, fungal (Candida spp.) infection has been identified as one of the key reasons causing the failure of the device that is inevitable and impactful to the society. Thus, this study evaluated the surface morphology, surface chemical composition and Candida albicans adhesion on specimens of 16 binary Ti-alloys (â¼5 wt% of any one of the alloy elements: Ag, Al, Au, Co, Cr, Cu, Fe, In, Mn, Mo, Nb, Pd, Pt, Sn, V and Zr) compared with cp-Ti, targeting to seek for the binary Ti-alloys which has the lowest C. albicans infection. Candida albicans cultures were grown on the specimens for 48 h, and colony forming units (CFUs) and real-time polymerase chain reaction (RT-PCR) were used to evaluate the biofilm formation ability. Scanning electron microscopy and confocal laser scanning microscopy confirmed the formation of C. albicans biofilm on all specimens' surfaces, such that CFU results showed Ti-Mo, Ti-Zr, Ti-Al and Ti-V have less C. albicans formed on the surfaces than cp-Ti. RT-PCR showed Ti-Zr and Ti-Cu have significantly higher C. albicans DNA concentrations than Ti-Al and Ti-V (P < 0.05), whereas Ti-Cu has even showed a statistically higher concentration than Ti-Au, Ti-Co, Ti-In and Ti-Pt (P < 0.05). This study confirmed that Ti-Mo, Ti-Zr, Ti-Al and Ti-V have lower the occurrence of C. albicans which might be clinically advantageous for medical devices, but Ti-Cu should be used in caution.
RESUMEN
In order to increase the biocompatibility and bioactivity of chitosan, hydroxyapatite was in situ combined into the spin-coated chitosan layer on the titanium substrate by incubating in modified simulated body fluid (m-SBF). The calcium phosphate/chitosan (CaP/CS) composite prepared in m-SBF showed a homogeneous distribution of spherical nano-clusters. The hydrophilicity of the coatings was increased by performing NaOH post-treatment of CaP/CS composites, which also affected apatite formation. Biocompatibility of the coatings was assessed by investigating the cellular response of human osteoblast-like MG-63 cells with 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. Cell adhesion and osteogenic properties of the mesoporous CaP/CS composite were evaluated by SEM and ALPase assay, respectively. This in vitro study showed improved cell adhesion and differentiation on nanostructured CaP/CS composites. These results indicate that this CaP/CS composite could be a promising candidate for bone tissue engineering.
Asunto(s)
Fosfatos de Calcio/química , Quitosano/química , Nanocompuestos/química , Líquidos Corporales , Fosfatos de Calcio/farmacología , Adhesión Celular/efectos de los fármacos , Línea Celular , Humanos , Microscopía Electrónica de Rastreo , Nanocompuestos/ultraestructura , Nanoestructuras/químicaRESUMEN
OBJECTIVE: The aim of this study was to understand the mechanism of mineralization and growth of a sialolith by analyzing its micromorphology, crystalline structure, and chemical compositions. STUDY DESIGN: A sialolith was removed along with submandibular salivary gland from a patient. After cross-cutting and polishing the sialolith, its morphology, chemical compositions, crystalline structure, and chemical states were analyzed by using optical camera, scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffractometer, Fourier transform infrared spectrophotometer, and transmittance electron microscopy. RESULTS: The sialolith had a core composed of organic material, such as lipid compounds, and the surrounding mineralized shell structure mostly consisted of hydroxyapatite. In the transition zone between the organic core and mineralized shell layers, inorganic layers were arranged alternately with organic layers. Congregated globular structures were calcified with hydroxyapatite and whitlockite crystallites. Analysis of crystalline structures and chemical compositions suggested that calcium phosphate minerals containing magnesium, such as whitlockite, were developed in the initial stage and gradually transformed into crystallites composed of hydroxyapatite during the growth of crystallites. CONCLUSIONS: Sialolith with an organic core grew as inorganic materials were deposited and calcified in alternate layers. The mineralization process might include the initial whitlockite development and successive transformation into more stable hydroxyapatite.
Asunto(s)
Cálculos de las Glándulas Salivales/química , Cálculos de las Glándulas Salivales/cirugía , Anciano , Humanos , Masculino , Microscopía Electrónica , Cálculos de las Glándulas Salivales/diagnóstico por imagen , Espectroscopía Infrarroja por Transformada de Fourier , Difracción de Rayos XRESUMEN
The surface characteristics and osteoconductivity were evaluated for the micro/nanoporous surfaces of titanium (Ti) alloys prepared by micro-arc oxidation (MAO) and hydrothermal treatment (HT) of binary Ti-5 wt% A alloys (A = Au, Mn, Nb, and Pd). Surface properties were analyzed using X-ray diffractometry, scanning electron microscopy, and energy dispersive X-ray spectroscopy. The osteoconductivity was evaluated by measuring the total protein, ALPase activity, and osteocalcin production. The surface morphologies of MAO/HT specimens mainly affected on their osteoconductivity. Total proteins on Ti alloys (MAO/HT) were slightly lower than that on commercially pure Ti (MAO/HT) after incubation of MG-63 osteoblast-like cells for 14 days. However, better ALPase activity and osteocalcin production were observed on MAO/HT-treated Ti5Mn, Ti5Nb, and Ti5Pd than that on cp-Ti (MAO/HT) after 14 days. Especially, Ti5Mn (MAO/HT) showed a significant increase of ALPase activity due to its well grown micro/nano structure. Meanwhile, very small nanorods on Ti5Au (MAO/HT) affected negatively to ALPase activity and osteocalcin production.
RESUMEN
PURPOSE: This study aimed to identify risk factors associated with bad splits during sagittal split ramus osteotomy by using three-dimensional computed tomography. METHODS: This study included 8 bad splits and 47 normal patients without bad splits. Mandibular anatomic parameters related to osteotomy line were measured. These included anteroposterior width of the ramus at level of lingula, distance between external oblique ridge and lingula, distance between sigmoid notch and inferior border of mandible, mandibular angle, distance between inferior outer surface of mandibular canal and inferior border of mandible under distal root of second molar (MCEM), buccolingual thickness of the ramus at level of lingula, and buccolingual thickness of the area just distal to first molar (BTM1) and second molar (BTM2). RESULTS: The incidence of bad splits in 625 sagittal split osteotomies was 1.28%. Compared with normal group, bad split group exhibited significantly thinner BTM2 and shorter sigmoid notch and inferior border of mandible (Pâ<0.05). However, for BTM1 and buccolingual thickness of the ramus at level of lingula, there was no statistical difference between the 2 groups. Mandibular angle, anteroposterior width of the ramus at level of lingula, external oblique ridge and lingula, and MCEM were not significantly different between the groups. CONCLUSION: This study suggests that patients with shorter ramus and low thickness of the buccolingual alveolar region distal to the second molar had a higher risk of bad splits. These anatomic data may help surgeons to choose the safest surgical techniques and best osteotomy sites.
Asunto(s)
Imagenología Tridimensional , Mandíbula/diagnóstico por imagen , Mandíbula/cirugía , Osteotomía Sagital de Rama Mandibular/efectos adversos , Osteotomía Sagital de Rama Mandibular/métodos , Tomografía Computarizada por Rayos X , Adulto , Femenino , Humanos , Masculino , Factores de Riesgo , Adulto JovenRESUMEN
This study examined a female patient with a lower edentulous state, who had undergone a previous alveolar distraction. A lingually malpositioned segment was found after the alveolar distraction. Therefore, an osteotomy of the distracted segment was performed and the segment was corrected into the labial side and fixed with miniplates. Good results in correcting the malpositioned segment were achieved in this edentulous patient using the osteotomy and fixation after an alveolar distraction.
Asunto(s)
Aumento de la Cresta Alveolar/métodos , Arcada Edéntula/cirugía , Osteotomía Mandibular/métodos , Aumento de la Cresta Alveolar/efectos adversos , Implantación Dental Endoósea/métodos , Femenino , Humanos , Persona de Mediana Edad , Osteogénesis por Distracción/métodosRESUMEN
The objective of this study is to fabricate bone-like apatite (BLAp) powder using the modified simulated body fluid (SBF). The SBF2X and SBF4X groups were prepared by increasing the concentration of inorganic ions by two and four times, respectively, to that of the standard SBF. The mSBF4X group was prepared by particularly increasing the concentrations of calcium and phosphate ions in SBF. Bovine serum albumin (BSA) was added for SBF2X-BSA, SBF4X-BSA, and mSBF4X-BSA groups. BLAp powders were precipitated in these SBFs while being kept at 60 °C. Micro-morphology of BLAp powders showed tens of micrometers-sized rounded clusters which composed with sheet-like nano crystallites. The radius of BLAp clusters were decreased by increasing the concentration of inorganic ions and by incorporating the BSA. The hydroxyapatite crystalline structure was dominant for all sample groups. Further, octacalcium phosphate structure was detected in the mSBF4X group. However, these peaks were decreased in mSBF4X-BSA. FT-IR spectra demonstrated that BSA was co-precipitated in BLAp crystallites, and the amount of BSA was higher in the mSBF4X-BSA group than in the SBF4X-BSA group.
Asunto(s)
Apatitas/química , Materiales Biomiméticos/química , Líquidos Corporales/química , Sustitutos de Huesos/química , Nanopartículas/química , Nanopartículas/ultraestructura , Ensayo de Materiales/métodos , Tamaño de la Partícula , Polvos , Albúmina Sérica Bovina , Propiedades de SuperficieRESUMEN
In this study, surface characteristics and osteoconductivity were investigated for the micro/nanostructured oxide layers fabricated on titanium using anodic oxidation (ANO), chemical etching (Et), and hydrothermal treatment (HT). Commercially pure titanium (CP-Ti) disks were anodic-oxidized using DC-type power supply in 1 M phosphoric acid electrolyte (P-ANO group). These specimens were further chemically etched using 30% H2O2 solution at 60 °C for 10 min (P-ANO-Et group). The P-ANO-Et-HT group was fabricated by hydrothermally treating the P-ANO-Et specimens in phosphorus-containing alkaline solution at 190 °C for 8 hrs. The P-ANO group showed a porous surface that was evenly covered with micro- and sub-micro pores. The size of these pores was decreased in the P-ANO-Et group. The P-ANO-Et-HT group showed a porous surface that was covered with nano-sized crystallites. Anatase TiO2 structure was observed in P-ANO-Et-HT group. The results of XPS demonstrated that the P-ANO-Et-HT group had a well-crystallized TiC2 structure, while the P-ANO and P-ANO-Et groups had an amorphous and phosphate-containing structure. Hydrophilicity of the P-ANO-Et-HT group was the highest. After MG63 osteoblast-like cells were cultured on the specimens for 3 hrs, SEM images of the cells cultured on P-ANO-Et-HT group specimens showed low initial adhesion. However, the osteoconductivity of these specimens increased more rapidly compared to that of the micro-structured surfaces. These results could be applied to fabricate titanium implants with an optimum micro/nano-surface for enhancing their osteoconductivity.
RESUMEN
In this paper, the effects of Nb addition (5-20 wt %) on the microstructure, mechanical properties, corrosion behavior, and cytotoxicity of Ti-Nb alloys were investigated with the aim of understanding the relationship between phase/microstructure and various properties of Ti-xNb alloys. Phase/microstructure was analyzed using X-ray diffraction (XRD), SEM, and TEM. The results indicated that the Ti-xNb alloys (x = 10, 15, and 20 wt %) were mainly composed of α + ß phases with precipitation of the isothermal ω phase. The volume percentage of the ω phase increased with increasing Nb content. We also investigated the effects of the alloying element Nb on the mechanical properties (including Vickers hardness and elastic modulus), oxidation protection ability, and corrosion behavior of Ti-xNb binary alloys. The mechanical properties and corrosion behavior of Ti-xNb alloys were found to be sensitive to Nb content. These experimental results indicated that the addition of Nb contributed to the hardening of cp-Ti and to the improvement of its oxidation resistance. Electrochemical experiments showed that the Ti-xNb alloys exhibited superior corrosion resistance to that of cp-Ti. The cytotoxicities of the Ti-xNb alloys were similar to that of pure titanium.
RESUMEN
PURPOSE: To evaluate the difference in cytotoxicity of soft denture lining materials depending on their component types. MATERIALS AND METHODS: Ten commercially available soft denture lining materials (SDLM) consisting of five silicone-based materials and five acrylic-based materials were evaluated. For the MTT test, cured SDLM samples were extracted in a culture medium for 24 hours, and L-929 cells were incubated in the extracted medium for 24 hours. Cell viability was determined using a microplate reader and compared with those of the negative control, which were cultured in a culture medium without test material. Agar overlay test was performed for the cured SDLM samples according to International Organization for Standardization (ISO) 7405. RESULTS: Among silicone-based lining materials, GC Reline Soft, Mollosil plus, and Dentusil showed a cell viability of 107.2% ± 4.5%, 102.3% ± 2.84%, and 93.0% ± 8.0%, respectively, compared with the control. Mucopren and Sofreliner Tough displayed significantly lower cell viability (86.4% ± 10.3% and 81.5% ± 4.3%,respectively) compared with the control (P < .05). Among acrylic-based materials, Kooliner, Visco-gel, Soft liner, Dura Base, and Coe-Soft displayed cell viability of 99.2% ± 14.6%, 93.1% ± 9.5%, 89.1% ± 9.8%, 87.6% ± 7.9%, and 75.9% ± 15.7%, respectively, compared with the control. Dura Base and Coe-Soft displayed significantly lower cell viability compared to the control. However, for all tested materials, cell viability exceeded the requirement limit of 70% specified in ISO 10993-5. In the agar overlay test, all five silicone-based materials and acrylic-based Kooliner were ranked as "noncytotoxic." However, Visco-gel was ranked as "mildly cytotoxic," and Soft liner, Coe-Soft, and Dura Base were ranked as "moderately cytotoxic." CONCLUSION: When an acrylic-based soft denture lining material is used, the possibility of a cytotoxic effect should be considered.
Asunto(s)
Materiales Dentales/toxicidad , Alineadores Dentales , Resinas Acrílicas/toxicidad , Agar , Animales , Técnicas de Cultivo de Célula , Línea Celular , Supervivencia Celular/efectos de los fármacos , Colorantes , Medios de Cultivo , Medios de Cultivo Condicionados , Fibroblastos/efectos de los fármacos , Ensayo de Materiales , Metacrilatos/toxicidad , Metilmetacrilatos/toxicidad , Ratones , Polimetil Metacrilato/toxicidad , Polivinilos/toxicidad , Elastómeros de Silicona/toxicidad , Siloxanos/toxicidad , Sales de Tetrazolio , Tiazoles , Factores de TiempoRESUMEN
STATEMENT OF PROBLEM: Reduced softness and separation from the denture base are the most significant problems of long-term soft lining materials. PURPOSE: The purpose of this study was to evaluate the durometer Shore A hardness and tensile bond strength of long-term soft denture lining materials and to investigate the correlation between these 2 properties. MATERIAL AND METHODS: A group of 7 soft lining materials, 6 silicone based (Dentusil, GC Reline Soft, GC Reline Ultrasoft, Mucopren Soft, Mucosoft, Sofreliner Tough) and 1 acrylic resin based (Durabase), were evaluated for durometer Shore A hardness and tensile bond strength to heat-polymerized denture base resin (Lucitone 199). A specially designed split mold and loading assembly with a swivel connector were used for the durometer Shore A hardness test and tensile bond strength test to improve accuracy and facilitate measurement. Three specimens of each product were stored in a 37°C water bath, and durometer Shore A hardness tests were carried out after 24 hours and 28 days. A tensile bond strength test was carried out for 10 specimens of each product, which were stored in a 37°C water bath for 24 hours before the test. Repeated-measures ANOVA, the Kruskal-Wallis and Duncan multiple range tests, and the Spearman correlation were used for statistical analyses. RESULTS: The repeated-measures ANOVA found significant durometer Shore A hardness differences for the materials (P<.001) and the interaction effect (aging×materials) (P<.001). GC Reline Ultrasoft showed the lowest mean durometer Shore A hardness (21.30 ±0.29 for 24 hours, 34.73 ±0.47 for 28 days), and GC Reline Soft showed the highest mean durometer Shore A hardness (50.13 ±0.48 for 24 hours, 57.20 ±0.28 for 28 days). The Kruskal-Wallis test found a significant difference in the mean tensile bond strength values (P<.001). GC Reline Ultrasoft (0.82 ±0.32 MPa) and Mucopren Soft (0.96 ±0.46 MPa) had a significantly lower mean tensile bond strength (P<.05). GC Reline Soft had the highest mean tensile bond strength (2.99 ±0.43 MPa) (P<.05), and acrylic resin-based Durabase showed a significantly different tensile bond strength (1.32 ±0.16 MPa), except for Mucopren Soft, among the materials (P<.05). The tensile bond strength and Shore A hardness showed a statistically insignificant moderate positive correlation (r=0.571, P=.180 for Shore A hardness 24 hours versus tensile bond strength; r=0.607, P=.148 for Shore A hardness 28 days versus tensile bond strength). CONCLUSIONS: Within the limitations of this study, significant differences were found in durometer Shore A hardness (with aging time) and tensile bond strength among the materials. Adhesive failure was moderately correlated with durometer Shore A hardness, especially after 28 days, but was not significant.
Asunto(s)
Recubrimiento Dental Adhesivo , Materiales Dentales/química , Alineadores Dentales , Resinas Acrílicas/química , Adhesividad , Bases para Dentadura , Dureza , Humanos , Ensayo de Materiales , Metacrilatos/química , Polivinilos/química , Siliconas/química , Siloxanos/química , Estrés Mecánico , Temperatura , Resistencia a la Tracción , Factores de Tiempo , Viscosidad , Agua/químicaRESUMEN
OBJECTIVE: This study was performed to evaluate the biocompatibility of nine types of pure metals using 36 experimental prosthetic titanium-based alloys containing 5, 10, 15, and 20wt% of each substituted metal. METHODS: The cell viabilities for pure metals on Ti alloys that contain these elements were compared with that of commercially pure (CP) Ti using the WST-1 test and agar overlay test. RESULTS: The ranking of pure metal cytotoxicity from most potent to least potent was: Co>Cu>In>Ag>Cr>Sn>Au>Pd>Pt>CP Ti. The cell viability ratios for pure Co, Cu, In, and Ag were 13.9±4.6%, 21.7±10.4%, 24.1±5.7%, and 24.8±6.0%, respectively, which were significantly lower than that for the control group (p<0.05). Pure Pd and Pt demonstrated good biocompatibility with cell viabilities of 93.8±9.6% and 97.2±7.1%, respectively. The Ti-5Pd alloy exhibited the highest cell viability (128.4±21.4%), which was greater than that of CP Ti. By alloying pure Co or Cu with Ti, the cell viabilities for the Ti-xCo and Ti-xCu alloys increased significantly up to 10wt% of the alloying element followed by a gradual decrease with a further increase in the concentration of the alloying element. Based on the agar overlay test, pure Ag, Co, Cr, Cu, and In were ranked as 'moderately cytotoxic', whereas all Ti alloys were ranked as 'noncytotoxic'. SIGNIFICANCE: The cytotoxicity of pure Ag, Co, Cr, Cu, and In suggests a need for attention in alloy design. The cytotoxicity of alloying elements became more biocompatible when they were alloyed with titanium. However, the cytotoxicity of titanium alloys was observed when the concentration of the alloying element exceeded its respective allowable limit. The results obtained in this study can serve as a guide for the development of new Ti-based alloy systems.
Asunto(s)
Agar/química , Aleaciones , Titanio/química , Animales , Línea Celular , Supervivencia Celular , RatonesRESUMEN
OBJECTIVES: The aim of this study was to evaluate the cytotoxicity, setting time and compressive strength of MTA and two novel tricalcium silicate-based endodontic materials, Bioaggregate (BA) and Biodentine (BD). MATERIALS AND METHODS: Cytotoxicity was evaluated by using a 2,3-bis(2-methoxy-4-nitro-5-sulfophenyl)-5-((phenylamino)carbonyl)-2H-tetrazolium hydroxide (XTT) assay. Measurements of 9 heavy metals (arsenic, cadmium, chromium, copper, iron, lead, manganese, nickel, and zinc) were performed by inductively coupled plasma-mass spectrometry (ICP-MS) of leachates obtained by soaking the materials in distilled water. Setting time and compressive strength tests were performed following ISO requirements. RESULTS: BA had comparable cell viability to MTA, whereas the cell viability of BD was significantly lower than that of MTA. The ICP-MS analysis revealed that BD released significantly higher amount of 5 heavy metals (arsenic, copper, iron, manganese, and zinc) than MTA and BA. The setting time of BD was significantly shorter than that of MTA and BA, and the compressive strength of BA was significantly lower than that of MTA and BD. CONCLUSIONS: BA and BD were biocompatible, and they did not show any cytotoxic effects on human periodontal ligament fibroblasts. BA showed comparable cytotoxicity to MTA but inferior physical properties. BD had somewhat higher cytotoxicity but superior physical properties than MTA.
RESUMEN
Surface characteristics and osteoblast cell functions were investigated for the nano-structured oxide layer on commercially pure titanium (CP-Ti) fabricated using microarc oxidation (MAO) and hydrothermal treatment (HT) methods. Ti-MAO-135HT, Ti-MAO-150HT, and Ti-MAO-175HT groups were fabricated by hydrothermally treating the MAO-treated specimens (Ti-MAO) in phosphorus-containing alkaline solution at temperatures of 135, 150, or 175 °C, respectively. After hydrothermal treatment, a nanosheet-shaped morphology, nano-needles and nanorods were observed on the porous surface of the Ti-MAO-135HT, Ti-MAO-150HT and Ti-MAO-175HT groups, respectively. The roughness was not significantly different for all groups. However the contact angle decreased dramatically as the hydrothermal temperature increased. The osteoblastic cell adhesion and viability of the Ti-MAO-150HT and Ti-MAO-175HT groups were significantly lower compared to those of the Ti-MAO group. This study showed that nano-topology formed on micro porous oxide layer was more important than hydrophilicity in its effect upon initial osteoblastic cell functions.
Asunto(s)
Adhesión Celular , Nanoestructuras , Osteoblastos/citología , Titanio/química , Humanos , Microscopía Electrónica de Rastreo , Difracción de Rayos XRESUMEN
In order to investigate the relationship between phase/microstructure and various properties of Ti-xAg alloys, a series of Ti-xAg alloys with Ag contents ranging from 5 to 20 wt% were prepared. The microstructures were characterized using X-ray diffractometry (XRD), optical microscopy (OM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). All of the Ti-xAg alloys showed a massive transformation from the ß-Ti to αm phase, which has a different crystal structure from that of the matrix phase, but it has the same composition as the matrix α-Ti phase. As a result of solid-solution strengthening of α-Ti and massive transformation phase, the Ti-xAg showed better mechanical properties than the commercially pure titanium (cp-Ti). Electrochemical results showed that the Ti-xAg alloys exhibited improved corrosion resistance and oxidation resistance than cp-Ti.