New insights into the surface Enhanced Raman Scattering (SERS) response of adenine using chemometrics.

The SERS response of adenine is one of the most studied, due to its outstanding exaltation. However, the spectra obtained strongly differ according to the experimental conditions and still remain not well understood. To be able to search for the presence of this molecule in complex environments, it is essential to better understand the SERS response of adenine alone. After a brief presentation of the literature on the subject, we present results suggesting that the experimental spectra would result from the overlap of different spectroscopic signatures, that may probably be due to different non-covalent interactions or different electromagnetic fields experienced by adenine molecules. An independent component analysis is reported. Our results underline the difficulty to precisely analyze the experimental data, the need to continue this research and to constitute data banks that would allow comparing the spectra obtained in different laboratories according to the experimental conditions.

Small angle neutron scattering on an absolute intensity scale and the internal surface of diatom frustules from three species of differing morphologies.

The internal nanostructure of the diatoms Cyclotella meneghiniana, Seminavis robusta and Achnanthes subsessilis was investigated using small angle neutron scattering (SANS) to examine thin biosilica samples, consisting of isotropic (powder) from their isolated cell walls. The interpretation of SANS data was assisted by several other measurements. The N2 adsorption, interpreted within the Branuer-Emmet-Teller isotherm, yielded the specific surface area of the material. Fourier transform infrared (FTIR) and Raman spectroscopy indicates that the isolated material is amorphous silica with small amounts of organic cell wall materials acting as a filling material between the silica particles. A two-phase (air and amorphous silica) model was used to interpret small angle neutron scattering data. After correction for instrumental resolution, the measurements on two SANS instruments covered an extended range of scattering vectors 0.0011 nm(-1) < q < 5.6 nm(-1), giving an almost continuous SANS curve over a range of scattering vectors, q, on an absolute scale of intensity for each sample. Each of the samples gave a characteristic scattering curve where log (intensity) versus log (q) has a -4 dependence, with other features superimposed. In the high-q regime, departure from this behaviour was observed at a length-scales equivalent to the proposed unitary silica particle. The limiting Porod scattering law was used to determine the specific area per unit of volume of each sample illuminated by the neutron beam. The Porod behaviour, and divergence from this behaviour, is discussed in terms of various structural features and the proposed mechanisms for the bio-assembly of unitary silica particles in frustules.

DNA compaction into new DNA vectors based on cyclodextrin polymer: surface enhanced Raman spectroscopy characterization.

The ability of DNA to bind polycation yielding polyplexes is widely used in nonviral gene delivery. The aim of the present study was to evaluate the DNA compaction with a new DNA vector using Raman spectroscopy. The polyplexes result from an association of a beta-cyclodextrin polymer (polybeta-CD), an amphiphilic cationic connector (DC-Chol or adamantane derivative Ada2), and DNA. The charge of the polymeric vector is effectively controlled by simple addition of cationic connector in the medium. We used surface enhanced Raman spectroscopy (SERS) to characterize this ternary complex, monitoring the accessibility of adenyl residues to silver colloids. The first experiments were performed using model systems based on polyA (polyadenosine monophosphate) well characterized by SERS. This model was then extended to plasmid DNA to study polybeta-CD/Ada2/DNA and polybeta-CD/DC-Chol/DNA polyplexes. The SERS spectra show a decrease of signal intensity when the vector/DNA charge ratio (Z+/-) increases. At the highest ratio (Z+/- = 10) the signal is 6-fold and 3-fold less intense than the DNA reference signal for Ada2 and DC-Chol polyplexes, respectively. Thus adenyl residues have a reduced accessibility as DNA is bound to the vector. Moreover, the SERS intensity variations are in agreement with gel electrophoresis and zeta potential experiments on the same systems. The overall study clearly demonstrates that the cationic charges neutralizing the negative charges of DNA result in the formation of stable polyplexes. In vitro transfection efficiency of those DNA vectors are also presented and compared to the classical DC-Chol lipoplexes (DC-Chol/DNA). The results show an increase of the transfection efficiency 2-fold higher with our vector based on polybeta-CD.

A hydroxyethylated cholesterol-based cationic lipid for DNA delivery: effect of conditioning.

We have synthesised a novel cholesterol-based cationic lipid to promote DNA transfer in cells. This lipid, dimethyl hydroxyethyl aminopropane carbamoyl cholesterol iodide (DMHAPC-Chol) contains a biodegradable carbamoyl linker and a hydroxyethyl group in the polar amino head moiety and is characterised by NMR. Liposomes prepared from this lipid and dioleoyl phosphatidyl ethanolamine (DOPE) in equimolar proportion showed a weak cytotoxicity as revealed by MTT assays and are efficient to deliver plasmids DNA evaluated by the expression of reporter genes in vitro and in vivo. In this paper, we present an original method to determine the lipid concentration based on the colorimetric detection of the colipid DOPE and the measure of the molar ratio DOPE/cationic lipid in the liposome by FTIR spectroscopy. The liposomes and lipid/DNA complexes structures were characterized by transmission electron microscopy (TEM) and by quasi-elastic light scattering (QLS). TEM indicated that the complexes correspond to aggregates containing globular substructures with liposomes size. The method of immuno-gold labelling was used to detect plasmid in the complex and reveals the presence of DNA inside the aggregates. Transfection results showed efficient DNA transfer depending on the charge ratio and liposomes conditioning. Gel retardation results indicated that at a molar charge ratio between X = 1.5 and X = 2.5 (depending on the liposome conditioning), all DNA was taken by liposomes. We showed that conditioning by freeze-drying (lyophilization) facilitates storage and improves transfection efficiency. When the liposomes were lyophilized prior to DNA addition or when the complexes were subjected to freeze-thawing cycles, the obtained complexes showed a transfection with levels enhanced up to four and five-fold respectively for the lyophilized liposomes and freeze-thawed complexes. NMR was used to characterize the modifications under freezing which showed an effect on 31P spectra.

Direct observation of domains in model stratum corneum lipid mixtures by Raman microspectroscopy.

Several studies on intact and model stratum corneum (SC), the top layer of the epidermis, have suggested the presence of crystalline domains. In the present work, we used micro-Raman mapping to detect lipid domains in model lipid mixtures formed by an equimolar mixture of ceramides, cholesterol, and palmitic acid, the three main lipid species of SC. We were able to determine the spatial distribution of the three compounds individually based on the systematic analysis of band areas. As a control, we studied freeze-dried lipid mixtures, and the Raman microspectroscopy reported faithfully the homogeneous distribution of the three compounds. Spectral mapping was then performed on hydrated equimolar mixtures carefully annealed. In this case, clear phase separations were observed. Domains enriched in cholesterol, ceramides, or palmitic acid with a size of a few tens of square microns were detected. These findings constitute the first direct evidence of the formation of heterogeneous domains in the SC lipid models in a bulk phase. Raman microspectroscopy is an innovative approach to characterize the conditions leading to the formation of domains and provides new insights into the understanding of the skin barrier.

Immobilization of lipid vesicles on polymer support via an amphiphilic peptidic anchor: application to a membrane enzyme.

To immobilize lipid vesicles on a polymer support, we have used a peptidic anchor with the following sequence: Ala-Ala-Leu-Leu-Leu-Ala-Ala-Ala-Ala-Ala-Ala-Ala-Ala-Ala-Ala-Ala-Ala-A la-Ala-Ala-Ala-Ala-Ala-Ala-Trp-Lys-Lys-Lys-Lys-Lys-Lys. This amphiphilic peptide was previously designed in our group to interact spontaneously and strongly with vesicles without perturbing their permeability. At the end of the solid-phase peptide synthesis, the peptide was left on the polymer beads and this novel polymer-peptide system was used for vesicle immobilization. It was shown that this polymer-peptide system could immobilize as much as 200 micromol of lipids per gram of dry resin. The amount of immobilized vesicles was decreased by a reduction of the proportion of the negatively charged lipids in the vesicles, indicating the importance of electrostatic interactions in the immobilization of the vesicles. The integrity of the vesicles was mostly preserved after the immobilization. This new polymer-peptide system was used easily and successfully to immobilize a membrane-bound enzyme, gamma-glutamyl transpeptidase. The activity of the membrane-bound enzyme was studied by monitoring the release of p-nitroaniline. The activity of the enzyme was still retained, even after being re-used eight times, indicating the strong immobilization of the enzyme in its active form. The polymer-peptide support could be regenerated by washing with ethanol and reused.

Design and characterization of anchoring amphiphilic peptides and their interactions with lipid vesicles.

In an effort to develop a polymer/peptide assembly for the immobilization of lipid vesicles, we have made and characterized four water-soluble amphiphilic peptides designed to associate spontaneously and strongly with lipid vesicles without causing significant leakage from anchored vesicles. These peptides have a primary amphiphilic structure with the following sequences: AAAAAAAAAAAAWKKKKKK, AALLLAAAAAAAAAAAAAAAAAAAWKKKKKK, and KKAALLLAAAAAAAAAAAAAAAAAAAWKKKKKK and its reversed homologue KKKKKKWAAAAA AAAAAAAAAAAAAALLLAAKK. Two of the four peptides have their hydrophobic segments capped at both termini with basic residues to stabilize the transmembrane orientation and to increase the affinity for negatively charged vesicles. We have studied the secondary structure and the membrane affinity of the peptides as well as the effect of the different peptides on the membrane permeability. The influence of the hydrophobic length and the role of lysine residues were clearly established. First, a hydrophobic segment of 24 amino acids, corresponding approximately to the thickness of a lipid bilayer, improves considerably the affinity to zwitterionic lipids compared to the shorter one of 12 amino acids. The shorter peptide has a low membrane affinity since it may not be long enough to adopt a stable conformation. Second, the presence of lysine residues is essential since the binding is dominated by electrostatic interactions, as illustrated by the enhanced binding with anionic lipids. The charges at both ends, however, prevent the peptide from inserting spontaneously in the bilayer since it would involve the translocation of a charged end through the apolar core of the bilayer. The direction of the amino acid sequence of the peptide has no significant influence on its behavior. None of these peptides perturbs membrane permeability even at an incubation lipid to peptide molar ratio of 0.5. Among the four peptides, AALLLAAAAAAAAAAAAAAAAAAAWKKKKKK is identified as the most suitable anchor for the immobilization of lipid vesicles.