Impact of surface chemical treatment in surgical regenerative treatment of ligature-induced peri-implantitis: A canine study.

BACKGROUND: Implant surface decontamination is a critical step in peri-implantitis treatment. The aim of this study was to assess the effect chemotherapeutic agents have on reosseointegration after treatment on ligature-inducted peri-implantitis. METHODS: Six male canines had 36 implants placed and ligatures were placed around them for 28 weeks to establish peri-implantitis. The peri-implant defects were randomly treated by 1 of 3 methods: 0.12% chlorhexidine (CHX test group), 1.5% sodium hypochlorite (NaOCl test group), or saline (Control group). Sites treated with NaOCl and CHX were grafted with autogenous bone, and all sites then either received a collagen membrane or not. Histology sections were obtained at 6 months postsurgery to assess percentage of reosseointegration. RESULTS: Thirty-five implants were analyzed (CHX: 13; NaOCl: 14; Control:8). NaOCl-treated sites demonstrated reosseointegration with direct bone-to-implant-contact on the previously contaminated surfaces (42% mean reosseointegration), which was significantly higher than Controls (p < 0.05). Correspondingly, clinical improvement was noted with a significant reduction in probing depth from 5.50 ± 1.24 mm at baseline to 4.46 ± 1.70 mm at 6-months postsurgery (p = 0.006). CHX-treated sites demonstrated a nonsignificant reosseointegration of 26% (p > 0.05); however, in the majority of cases, the new bone growth was at a distance from the implant surface without contact. Probing depths did not improve in the CHX group. The use of membrane did not influence reosseointegration or probing depths (all p > 0.05). CONCLUSION: Titanium implants with peri-implantitis have the capacity to reosseointegrate following regenerative surgery. However, treatment response is contingent upon the chemotherapeutic agent selection. Additional chemical treatment with 1.5% NaOCl lead to the most favorable results in terms of changes in defect depth and percentage of reosseointegration as compared to CHX, which may hinder reosseointegration.

Accuracy of robotic surgery for dental implant placement: A systematic review and meta-analysis.

OBJECTIVES: To systematically analyze the accuracy of robotic surgery for dental implant placement. MATERIALS AND METHODS: PubMed, Embase, and Cochrane CENTRAL were searched on October 25, 2023. Model studies or clinical studies reporting the accuracy of robotic surgery for dental implant placement among patients with missing or hopeless teeth were included. Risks of bias in clinical studies were assessed. Meta-analyses were undertaken. RESULTS: Data from 8 clinical studies reporting on 109 patients and 242 implants and 13 preclinical studies were included. Positional accuracy was measured by comparing the implant plan in presurgery CBCT and the actual implant position in postsurgery CBCT. For clinical studies, the pooled (95% confidence interval) platform deviation, apex deviation, and angular deviation were 0.68 (0.57, 0.79) mm, 0.67 (0.58, 0.75) mm, and 1.69 (1.25, 2.12)°, respectively. There was no statistically significant difference between the accuracy of implants placed in partially or fully edentulous patients. For model studies, the pooled platform deviation, apex deviation, and angular deviation were 0.72 (0.58, 0.86) mm, 0.90 (0.74, 1.06) mm, and 1.46 (1.22, 1.70)°, respectively. No adverse event was reported. CONCLUSION: Within the limitation of the present systematic review, robotic surgery for dental implant placement showed suitable implant positional accuracy and had no reported obvious harm. Both robotic systems and clinical studies on robotic surgery for dental implant placement should be further developed.

Nerve Growth Factor-Preconditioned Mesenchymal Stem Cell-Derived Exosome-Functionalized 3D-Printed Hierarchical Porous Scaffolds with Neuro-Promotive Properties for Enhancing Innervated Bone Regeneration.

The essential role of the neural network in enhancing bone regeneration has often been overlooked in biomaterial design, leading to delayed or compromised bone healing. Engineered mesenchymal stem cells (MSCs)-derived exosomes are becoming increasingly recognized as potent cell-free agents for manipulating cellular behavior and improving therapeutic effectiveness. Herein, MSCs are stimulated with nerve growth factor (NGF) to regulate exosomal cargoes to improve neuro-promotive potential and facilitate innervated bone regeneration. In vitro cell experiments showed that the NGF-stimulated MSCs-derived exosomes (N-Exos) obviously improved the cellular function and neurotrophic effects of the neural cells, and consequently, the osteogenic potential of the osteo-reparative cells. Bioinformatic analysis by miRNA sequencing and pathway enrichment revealed that the beneficial effects of N-Exos may partly be ascribed to the NGF-elicited multicomponent exosomal miRNAs and the subsequent regulation and activation of the MAPK and PI3K-Akt signaling pathways. On this basis, N-Exos were delivered on the micropores of the 3D-printed hierarchical porous scaffold to accomplish the sustained release profile and extended bioavailability. In a rat model with a distal femoral defect, the N-Exos-functionalized hierarchical porous scaffold significantly induced neurovascular structure formation and innervated bone regeneration. This study provided a feasible strategy to modulate the functional cargoes of MSCs-derived exosomes to acquire desirable neuro-promotive and osteogenic potential. Furthermore, the developed N-Exos-functionalized hierarchical porous scaffold may represent a promising neurovascular-promotive bone reparative scaffold for clinical translation.

Accuracy and safety of a haptic operated and machine vision controlled collaborative robot for dental implant placement: A translational study.

OBJECTIVES: Multiple generations of medical robots have revolutionized surgery. Their application to dental implants is still in its infancy. Co-operating robots (cobots) have great potential to improve the accuracy of implant placement, overcoming the limitations of static and dynamic navigation. This study reports the accuracy of robot-assisted dental implant placement in a preclinical model and further applies the robotic system in a clinical case series. MATERIALS AND METHODS: In model analyses, the use of a lock-on structure at robot arm-handpiece was tested in resin arch models. In a clinical case series, patients with single missing teeth or edentulous arch were included. Robot-assisted implant placement was performed. Surgery time was recorded. Implant platform deviation, apex deviation, and angular deviation were measured. Factors influencing implant accuracy were analyzed. RESULTS: The in vitro results showed that with a lock-on structure, the mean (SD) of platform deviation, apex deviation, and angular deviation were 0.37 (0.14) mm, 0.44 (0.17) mm, and 0.75 (0.29)°, respectively. Twenty-one patients (28 implants) were included in the clinical case series, 2 with arches and 19 with single missing teeth. The median surgery time for single missing teeth was 23 (IQ range 20-25) min. The surgery time for the two edentulous arches was 47 and 70 min. The mean (SD) of platform deviation, apex deviation, and angular deviation was 0.54 (0.17) mm, 0.54 (0.11) mm, and 0.79 (0.22)° for single missing teeth and for 0.53 (0.17) mm, 0.58 (0.17) mm, and 0.77 (0.26)° for an edentulous arch. Implants placed in the mandible had significantly larger apex deviation than those in the maxilla. CONCLUSION: Cobot-assisted dental implant placement showed excellent positional accuracy and safety in both the in vitro study and the clinical case series. More technological development and clinical research are needed to support the introduction of robotic surgery in oral implantology. Trial registered in ChiCTR2100050885.

Cell Responses to Calcium- and Protein-Conditioned Titanium: An In Vitro Study.

Dental implants have become the leading choice for patients who lose teeth; however, dental implantation is challenged by peri-implant infections. Here, calcium-doped titanium was fabricated by the combinational use of thermal evaporation and electron beam evaporation in a vacuum; then, the material was immersed in a calcium-free phosphate-buffered saline solution containing human plasma fibrinogen and incubated at 37 °C for 1 h, creating calcium- and protein-conditioned titanium. The titanium contained 12.8 ± 1.8 at.% of calcium, which made the material more hydrophilic. Calcium release by the material during protein conditioning was able to change the conformation of the adsorbed fibrinogen, which acted against the colonization of peri-implantitis-associated pathogens (Streptococcus mutans, UA 159, and Porphyromonas gingivalis, ATCC 33277), while supporting the adhesion and growth of human gingival fibroblasts (hGFs). The present study confirms that the combination of calcium-doping and fibrinogen-conditioning is a promising pathway to meeting the clinical demand for suppressing peri-implantitis.

Microporous Implants Modified by Bifunctional Hydrogel with Antibacterial and Osteogenic Properties Promote Bone Integration in Infected Bone Defects.

Prosthesis implantation and bone integration under bacterial infection are arduous challenges in clinical practice. It is well known that the reactive oxygen species (ROS) produced by bacterial infection around the bone defects will further hinder bone healing. To solve this problem, we prepared a ROS-scavenging hydrogel by cross-linking polyvinyl alcohol and a ROS-responsive linker, N1-(4-boronobenzyl)-N3-(4-boronophenyl)-N1, N1, N3, N3-tetramethylpropane-1, 3-diaminium, to modify the microporous titanium alloy implant. The prepared hydrogel was used as an advanced ROS-scavenging tool to promote bone healing by inhibiting the ROS levels around the implant. Bifunctional hydrogel serving as a drug delivery system can release therapeutic molecules, including vancomycin, to kill bacteria and bone morphogenetic protein-2 to induce bone regeneration and integration. This multifunctional implant system that combines mechanical support and disease microenvironment targeting provides a novel strategy for bone regeneration and integration of implants in infected bone defects.

Debridement of contaminated implants using air-polishing coupled with pH-responsive maximin H5-embedded metal-organic frameworks.

The primary goal of peri-implantitis treatments remains the decontamination of implant surfaces exposed to polymicrobial biofilms and renders biocompatibility. In this study, we reported a synergistic strategy for the debridement and re-osteogenesis of contaminated titanium by using erythritol air abrasion (AA) coupled with an as-synthesized pH-responsive antimicrobial agent. Here, the anionic antibacterial peptide Maximin H5 C-terminally deaminated isoform (MH5C) was introduced into the Zeolitic Imidazolate Frameworks (ZIF-8) via a one-pot synthesis process. The formed MH5C@ZIF-8 nanoparticles (NPs) not only possessed suitable stability, but also guarantee the slow-release effect of MH5C. Antibacterial experiments revealed that MH5C@ZIF-8 NPs exhibited excellent antimicrobial abilities toward pathogenic bacteria of peri-implantitis, confirming ZIF-8 NPs as efficient nanoplatforms for delivering antibacterial peptide. To evaluate the comprehensive debridement efficiency, single-species as well as mixed-species biofilms were successively established on commercially used titanium surfaces and decontaminated with different methods: removed only by erythritol air abrasion, treated merely with MH5C@ZIF-8 NPs, or received both managements. The results demonstrated that only erythritol air abrasion accompanied with MH5C@ZIF-8 NPs at high concentrations eliminated almost all retained bacteria and impeded biofilm rehabilitation, while neither erythritol air abrasion nor MH5C@ZIF-8 NPs alone could achieve this. Subsequently, we evaluated the re-osteogenesis on previously contaminated surfaces which were treated with different debridement methods afterwards. We found that cell growth and osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BMSCs) in the group received both treatments (AA + MH5C@ZIF-8) were higher than those in other groups. Our work emphasized the great potential of the synergistic therapy as a credible alternative for removing microorganisms and rendering re-osseointegration on contaminated implant surfaces, boding well for the comprehensive applications in peri-implantitis treatments.

Antibacterial Designs for Implantable Medical Devices: Evolutions and Challenges.

The uses of implantable medical devices are safer and more common since sterilization methods and techniques were established a century ago; however, device-associated infections (DAIs) are still frequent and becoming a leading complication as the number of medical device implantations keeps increasing. This urges the world to develop instructive prevention and treatment strategies for DAIs, boosting the studies on the design of antibacterial surfaces. Every year, studies associated with DAIs yield thousands of publications, which here are categorized into four groups, i.e., antibacterial surfaces with long-term efficacy, cell-selective capability, tailored responsiveness, and immune-instructive actions. These innovations are promising in advancing the solution to DAIs; whereas most of these are normally quite preliminary "proof of concept" studies lacking exact clinical scopes. To help identify the flaws of our current antibacterial designs, clinical features of DAIs are highlighted. These include unpredictable onset, site-specific incidence, and possibly involving multiple and resistant pathogenic strains. The key point we delivered is antibacterial designs should meet the specific requirements of the primary functions defined by the "intended use" of an implantable medical device. This review intends to help comprehend the complex relationship between the device, pathogens, and the host, and figure out future directions for improving the quality of antibacterial designs and promoting clinical translations.

Effects of Dental Implants and Nutrition on Elderly Edentulous Subjects: Protocol for a Factorial Randomized Clinical Trial.

Background: Loss of masticatory function consequent to tooth loss has been associated with changes in food choices and insufficient nutritional intake. To date, interventions based on dental prostheses alone did not significantly improve nutrient intake. Pilot studies have shown positive impacts of interventions combining implant-supported fixed dental prosthesis with brief dietary advice. The relative contribution and the potential synergy of the components of such interventions need to be determined as it has major public health implications for the community-dwelling aging population that continues to disproportionately suffer from tooth loss and its consequences. Objective: To assess the effect of rehabilitation of masticatory function with fixed implant supported dentures and nutrition education in older subjects with terminal dentition (stage IV periodontitis) or full edentulism. Methods: A 2 × 2 factorial randomized controlled trial with 16-month follow-up of eligible adults (≥60 years) with loss of masticatory function consequent to full arch edentulism or terminal dentition (n = 120) will be conducted to test whether the rehabilitation of masticatory function with fixed implant supported dentures, nutrition education and/or their combination improves intake of fresh fruits and vegetables for aging subjects. The study has been designed to detect changes in fresh fruits and fresh vegetables intake at 4 months using the 24-h dietary recall method. Changes in protein as percentage of total energy, nutritional biomarkers, plasma metabolomics, oral and gut microbiome, quality of life and masticatory function will also be assessed. Discussion: We hypothesize that receiving rehabilitation of masticatory function with fixed implant dentures together with nutrition education is the most effective intervention for improving nutrient intake in aging community-dwelling subjects with extensive tooth loss. The results of this study will assist in designing better treatment regimens, guide medical care for individual subjects, and inform public health and policy. Clinical Trials Registration: NCT05334407.

Accuracy and primary stability of tapered or straight implants placed into fresh extraction socket using dynamic navigation: a randomized controlled clinical trial.

OBJECTIVES: To compare the accuracy and primary stability of tapered and straight implants undergoing immediate implant placement with dynamic navigation. MATERIALS AND METHODS: Patients with compromised anterior teeth in maxilla were recruited and allocated randomly into (1) tapered implant group (TI group) and (2) straight implant group (SI group). Implants were inserted into fresh sockets with dynamic navigation. Three-dimensional platform deviation, apex deviation, angular deviation, insertion torque value (ITV) and implant stability quotient (ISQ) were recorded. RESULTS: Twenty patients with 20 implants were included. The overall platform, apex, and angular deviation were 0.87 ± 0.35 mm, 0.81 ± 0.34 mm, and 2.40 ± 1.31°, respectively. The accuracy was 0.86 ± 0.26 mm, 0.76 ± 0.33 mm, and 2.49 ± 1.54° for TI, and 0.89 ± 0.44 mm, 0.88 ± 0.36 mm, and 2.31 ± 1.01° for SI, with no significant difference (p = 0.85, 0.45, 0.76). Sagittal root position classification (SRP) class I may obtain greater error in numerical values in straight implants (0.97 ± 0.47 mm vs. 0.6 ± 0.16 mm, 0.92 ± 0.36 mm vs. 0.73 ± 0.36 mm, 2.48 ± 1.19° vs. 1.71 ± 0.14°). The overall ISQ was 60.74. ISQ was 60.48 for TI and 60.96 for SI, with no significant difference. Acceptable ITV (> 15 Ncm) was achieved in most of the included patients (SI 7/10, TI 9/10). CONCLUSIONS: High accuracy and primary stability of immediate implant placement could be achieved both in tapered and straight implants with dynamic navigation systems. CLINICAL RELEVANCE: Tapered and straight implants did not reach a consensus on which was better in immediate implant regarding to accuracy and primary stability. Our study demonstrated implant macrodesign did not affect accuracy and primary stability in immediate implant using dynamic navigation.

Clinical, radiographic, and immunological evaluation of angulated screw-retained and cemented single-implant crowns in the esthetic region: A 1-year randomized controlled clinical trial.

BACKGROUND: Screw-retained implant crowns are considered more biologically compatible than cemented crowns due to the absence of excess cement. However, traditional screw-retained implant crowns are not viable when the access hole of the screw channel would need to be located in an esthetic area, which would compromise the esthetic outcome of the treatment. PURPOSE: To evaluate the clinical, radiographic, and immunological outcomes of angulated screw-retained and cemented single-implant crowns in the esthetic region. MATERIALS AND METHODS: The study was a single-center, open-label, randomized controlled clinical trial. Eligible patients were randomly placed in two groups: angulated screw-retained group (AG) and cemented group (CG). Implant survival rate, bleeding on probing rate (BOP%), probing depth (PD), modified plaque index (mPI), marginal bone loss (MBL), concentrations of pro-inflammatory cytokines (TNF-α, IL-6) in peri-implant crevicular fluid (PICF), mechanical complications, and pink esthetic score/white esthetic score (PES/WES) were evaluated. RESULTS: Fifty-six patients (AG: 29, CG: 27) attended the 1-year examination. The drop-out rate was 6.67%. No implant failure was found in both groups during the observation period. BOP% was significantly lower in the AG than that in the CG (mean, 21.84% ± 19.97% vs. 37.04% ± 26.28%, p = 0.018). The concentration of TNF-α in PICF was significantly higher in the AG than that in the CG (median, 13.54 vs. 4.62, p = 0.019). No significant difference of PD, mPI, MBL, IL-6, or mechanical complication rates was found between the two groups. Mean scores for PES/WES were 21.71 and 21.64 in the AG and CG, respectively. CONCLUSION: Based on the present results, both treatment options showed acceptable clinical outcomes in the short term. Angulated screw-retained crowns might benefit the peri-implant soft tissue. However, studies with long-term follow-up are needed to confirm whether the higher concentration of TNF-α will compromise the long-term outcomes of treatment.

PRMT5 inhibition modulates murine dendritic cells activation by inhibiting the metabolism switch: a new therapeutic target in periodontitis.

BACKGROUND: Protein arginine methyltransferase 5 (PRMT5) catalyzes the methylation of arginine residues in multiple proteins. Recent reports have highlighted the anti-inflammatory role of PRMT5. Dendritic cells (DCs) are well-known professional antigen-presenting cells that are crucial for immune response initiation. However, whether PRMT5 participates in DC immunity processes is unknown. METHODS: In an in vitro experiment, a PRMT5 inhibitor (EPZ015666) was used to inhibit PRMT5 expression, and lipopolysaccharide (LPS) stimulation was applied to mimic the inflammation context. Proinflammatory cytokine production, interferon-stimulated genes (ISGs), costimulatory molecules, major histocompatibility complex (MHC) expression and DC metabolism were measured following PRMT5 inhibition and LPS stimulation. In an in vivo study, we first tested PRMT5 mRNA and protein expression in a BALB/c mouse ligature-induced periodontitis model. Then, we evaluated changes in periodontal tissue and DC migration to cervical lymph nodes after local treatment with the PRMT5 inhibitor. RESULTS: The in vitro results revealed that PRMT5 inhibition attenuated DC activation and maturation by inhibiting the expression of proinflammatory cytokines, ISGs, costimulatory molecules, and MHC induced by LPS stimulation. We also found that inhibition of PRMT5 blocked the DC metabolic switch to glycolysis. In the in vivo study, we found that PRMT5 inhibition reversed the severity of the lesions and slowed the migration of DCs to cervical lymph nodes. CONCLUSIONS: The results show a critical role of PRMT5 in the control of DC activation through inhibition of the metabolic switch and indicate that PRMT5 is a promising therapeutic target in periodontitis.

Melatonin prevents peri­implantitis via suppression of TLR4/NF-κB.

Peri­implantitis, which is characterized by peri­implant mucositis and alveolar bone resorption, significantly shortens the service life of dental implants. Melatonin is well-known for its anti-inflammatory and osteoprotective activities. Nevertheless, the effects and mechanisms of melatonin to prevent peri­implantitis remain unknown. In this study, the lipopolysaccharide-induced peri­implantitis model was established after the titanium implants were osseointegrated, and the rats received daily administrations of melatonin. The gingival fibroblasts and osteoclasts/osteoblasts were also co-cultured to simulate the inflammatory environment in vitro. We found that prophylactic administration of melatonin decreased proinflammatory cytokine levels and osteoclast numbers, attenuated alveolar bone resorption, and reduced the incidence of peri­implantitis in vivo. Furthermore, melatonin suppressed osteoclastic formation and function in the inflammatory co-culture environment, while melatonin promoted osteoblastic differentiation and function in the in vitro model. Mechanistically, melatonin reduced TLR4 protein levels, and inhibited activation of NF-κB to downregulate the levels of TNF, IL-1ß, and IL-6. These data showed that melatonin was a potent agent to prevent peri­implantitis through inhibiting TLR4/NF-κB signaling. Our findings provide a novel strategy to prevent peri­implantitis, and expand the applications of melatonin. STATEMENT OF SIGNIFICANCE: Dental implants have become the first choice for restoring partial and full edentulism, but its service life is seriously affected by peri­implantitis. Exploration of novel and effective approaches to prevent peri­implantitis is an important and urgent need. In the present study, we have reported for the first time that prophylactic administration of melatonin delayed the occurrence and reduced the incidence of peri­implantitis by decreasing proinflammatory cytokine levels, inhibiting osteoclastogenesis, and promoting osteogenesis. The study is expected to have an important significance on the prevention of peri­implantitis.

Circ_0008542 in osteoblast exosomes promotes osteoclast-induced bone resorption through m6A methylation.

With an increasing aging society, China is the world's fastest growing markets for oral implants. Compared with traditional oral implants, immediate implants cause marginal bone resorption and increase the failure rate of osseointegration, but the mechanism is still unknown. Therefore, it is important to further study mechanisms of tension stimulus on osteoblasts and osteoclasts at the early stage of osseointegration to promote rapid osseointegration around oral implants. The results showed that exosomes containing circ_0008542 from MC3T3-E1 cells with prolonged tensile stimulation promoted osteoclast differentiation and bone resorption. Circ_0008542 upregulated Tnfrsf11a (RANK) gene expression by acting as a miR-185-5p sponge. Meanwhile, the circ_0008542 1916-1992 bp segment exhibited increased m6A methylation levels. Inhibiting the RNA methyltransferase METTL3 or overexpressing the RNA demethylase ALKBH5 reversed osteoclast differentiation and bone resorption induced by circ_0008542. Injection of circ_0008542 + ALKBH5 into the tail vein of mice reversed the same effects in vivo. Site-directed mutagenesis study demonstrated that 1956 bp on circ_0008542 is the m6A functional site with the abovementioned biological functions. In conclusion, the RNA methylase METTL3 acts on the m6A functional site of 1956 bp in circ_0008542, promoting competitive binding of miRNA-185-5p by circ_0008542, and leading to an increase in the target gene RANK and the initiation of osteoclast bone absorption. In contrast, the RNA demethylase ALKBH5 inhibits the binding of circ_0008542 with miRNA-185-5p to correct the bone resorption process. The potential value of this study provides methods to enhance the resistance of immediate implants through use of exosomes releasing ALKBH5.

Influence of Different Factors on the Accuracy of Digital Impressions of Multiple Implants: An In Vitro Study.

PURPOSE: To investigate the effect of implant angulation, non-free-end partial edentulism, and number of scan bodies on the accuracy of digital impressions of multiple implants in partially edentulous arches. MATERIALS AND METHODS: Four reference models of partially edentulous mandibles with implants (RM1, RM2, RM3, and RM4) representing different intraoral situations were each scanned 10 times by an intraoral scanner. Reference scans were obtained by a laboratory scanner. Test scans were compared with reference scans to obtain the distance deviations (Δd) and angular deviations (Δθ) between scan bodies for trueness assessment. Differences among the repeated test scans of each model were measured and recorded as Δdp and Δθp for precision assessment. The Student t test (α = .05) was used to compare Δd, Δθ, Δdp, and Δθp of different reference models, including RM2 vs RM1 (effect of non-free-end partial edentulism), RM3 vs RM1 (effect of implant angulation), and RM4 vs RM1 (effect of number of scan bodies). RESULTS: The implant with 17-degree angulation in RM3 showed significantly lower Δd, Δθ, and Δθp compared with the parallel implant in RM1 (Δd: P = .0382, Δθ: P = .0267, Δθp: P = .0417). The RM2 of non-free-end partial edentulism had lower distance and angular deviations than RM1, but without a significant difference. The number of scan bodies had no significant effect on the Δd, Δθ, Δdp, and Δθp of RM4 and RM1. CONCLUSION: Angulated implants showed better accuracy of digital impressions in partially edentulous arches compared with parallel implants. Non-free-end partial edentulism was attributed to improved accuracy, while the number of scan bodies showed no effect.

Accuracy of full-arch digital implant impressions taken using intraoral scanners and related variables: A systematic review.

PURPOSE: To evaluate the accuracy of full-arch digital implant impressions taken using intraoral scanners and analyse the related variables. MATERIALS AND METHODS: An electronic search of studies on the accuracy of digital implant impressions in fully edentulous arches from 1 January 2012 to 29 February 2020 was conducted in PubMed, EMBASE and the Cochrane Library. Only peer-reviewed experimental or clinical studies written in English were included. Studies assessing the accuracy of restorations, case reports, clinical reports, technical reports and reviews were excluded. The literature screening, article reading and assessment of risk of bias were carried out by two reviewers. The data on the study characteristics, accuracy outcomes and investigated variables were extracted. RESULTS: After removal of duplicates, a total of 166 studies were identified, of which 42 were initially selected for full-text reading and 30 were included in the final analysis (29 in vitro studies and one in vivo study). The trueness of digital implant impressions ranged from 7.6 to 731.7 µm, and the precision ranged from 15.2 to 204.2 µm. Angular deviations were between 0.13 and 10.01 degrees. Considering 100 µm and 0.4 degrees as clinically acceptable levels of deviation, 18 studies reported linear/distance/3D deviations larger than 100 µm and only two studies reported angular deviations below 0.4 degrees. The effect of interimplant distance/length of the arch scanned/scanning sequence/scanning range/implant position (nine studies), implant angulation (ten studies), implant depth (five studies), implant connection (two studies), operator experience (six studies), scan body type (three studies), intraoral scanner type (six studies), scanning strategy (two studies) and modification technique (three studies) was investigated. CONCLUSIONS: Based on the results of the included studies, full-arch digital implant impressions taken using intraoral scanners are not sufficiently accurate for clinical application. Accuracy varies greatly with interimplant distance, scan body type, intraoral scanner type and operator experience, whereas implant angulation, implant connections and implant depth have no effect. The effects of scanning strategy and modification technique need further investigation.

Graphene-Reinforced Titanium Enhances Soft Tissue Seal.

The integrity of soft tissue seal is essential for preventing peri-implant infection, mainly induced by established bacterial biofilms around dental implants. Nowadays, graphene is well-known for its potential in biocompatibility and antisepsis. Herein, a new titanium biomaterial containing graphene (Ti-0.125G) was synthesized using the spark plasma sintering (SPS) technique. After material characteristics detection, the subsequent responses of human gingival fibroblasts (HGFs) and multiple oral pathogens (including Streptococci mutans, Fusobacterium nucleatum, and Porphyromonas gingivalis) to the graphene-reinforced sample were assessed, respectively. Also, the dynamic change of the bacterial multispecies volume in biofilms was evaluated using absolute quantification PCR combined with Illumina high-throughput sequencing. Ti-0.125G, in addition to its particularly pronounced inhibitory effect on Porphyromonas gingivalis at 96 h, was broadly effective against multiple pathogens rather than just one strain. The reinforced material's selective responses were also evaluated by a co-culture model involving HGFs and multiple strains. The results disclosed that the graphene-reinforced samples were highly effective in keeping a balance between the favorable fibroblast responses and the suppressive microbial growth, which could account for the optimal soft tissue seal in the oral cavity. Furthermore, the underlying mechanism regarding new material's bactericidal property in the current study has been elucidated as the electron transfer, which disturbed the bacterial respiratory chain and resulted in a decrease of microbial viability. According to the Kyoto Encyclopedia of Genes and Genomes (KEGG) database, the PICRUSt tool was conducted for the prediction of microbial metabolism functions. Consequently, it is inferred that Ti-0.125G has promising potentials for application in implant dentistry, especially in enhancing the integrity of soft tissue and improving its resistance against bacterial infections around oral implants.

Bovine-Derived Xenografts Immobilized With Cryopreserved Stem Cells From Human Adipose and Dental Pulp Tissues Promote Bone Regeneration: A Radiographic and Histological Study.

Adipose tissue-derived stem cells (ADSCs) and dental pulp stem cells (DPSCs) have become promising sources for bone tissue engineering. Our study aimed at evaluating bone regeneration potential of cryopreserved ADSCs and DPSCs combined with bovine-derived xenografts with 10% porcine collagen. In vitro studies revealed that although DPSCs had higher proliferative abilities, ADSCs exhibited greater mineral depositions and higher osteogenic-related gene expression, indicating better osteogenic differentiation potential of ADSCs. After applying cryopreserved ADSCs and DPSCs in a critical-sized calvarial defect model, both cryopreserved mesenchymal stem cells significantly improved bone volume density and new bone area at 2, 4, and 8 weeks. Furthermore, the combined treatment with ADSCs and xenografts was more efficient in enhancing bone repair processes compared to combined treatment with DPCSs at all-time points. We also evaluated the sequential early bone healing process both histologically and radiographically, confirming a high agreement between these two methods. Based on these results, we propose grafting of the tissue-engineered construct seeded with cryopreserved ADSCs as a useful strategy in accelerating bone healing processes.

3D­printed Ti6Al4V scaffolds combined with pulse electromagnetic fields enhance osseointegration in osteoporosis.

The loosening and displacement of prostheses after dental implantation and arthroplasty is a substantial medical burden due to the complex correction surgery. Three­dimensional (3D)­printed porous titanium (pTi) alloy scaffolds are characterized by low stiffness, are beneficial to bone ingrowth, and may be used in orthopedic applications. However, for the bio­inert nature between host bone and implants, titanium alloy remains poorly compatible with osseointegration, especially in disease conditions, such as osteoporosis. In the present study, 3D­printed pTi scaffolds with ideal pore size and porosity matching the bone tissue, were combined with pulse electromagnetic fields (PEMF), an exogenous osteogenic induction stimulation, to evaluate osseointegration in osteoporosis. In vitro, external PEMF significantly improved osteoporosis­derived bone marrow mesenchymal stem cell proliferation and osteogenic differentiation on the surface of pTi scaffolds by enhancing the expression of alkaline phosphatase, runt­related transcription factor­2, osteocalcin, and bone morphogenetic protein­2. In vivo, Microcomputed tomography analysis and histological evaluation indicated the external PEMF markedly enhanced bone regeneration and osseointegration. This novel therapeutic strategy has potential to promote osseointegration of dental implants or artificial prostheses for patients with osteoporosis.

Peri-implant tissue alteration around tissue-level and bone-level implants in fresh extraction sockets: a histomorphometric study in dogs.

BACKGROUND: To compare tissue alteration in fresh extraction sockets between bone-level and tissue-level implants with different neck designs. METHODS: Bilateral premolars of 6 adult Labrador dogs were extracted, and 24 bone-level and tissue-level implants with two different neck designs were immediately placed. At the same time, buccal bony wall thickness in fresh extraction sockets was also recorded. The Straumann® Bone Level (BL) and Standard Plus (SP) implants were positioned at two insertion depths: 1mm below and flush with the alveolar crest. All animals were sacrificed 6 months after the implant placement. Undecalcified block sections were obtained for histological measurement. Vertical bone resorption and biological widths were documented. Statistical analysis consisted of two sample t-test and Wilcoxon sign-rank test. RESULTS: All implants were histologically osseointegrated. There was no significant difference between BL implants and SP implants in vertical bone resorption regardless of the insertion depths (P>0.05). Meanwhile, significant difference was found in lingual biological width between BL (3.16 mm) and SP (2.43 mm) implants when placed 1mm below the alveolar crest (P<0.05). CONCLUSIONS: Within the limits, it seemed that different implant neck designs had little effect on bone remodeling in fresh extraction sockets. However, longer biological width was found in bone-level implants.