RESUMEN
Crystallization experiments performed with highly supercooled solutions produced highly pure (>99 wt %) and highly crystalline mesocrystals of curcumin from impure solutions (â¼22% of two structurally similar impurities) in one step. These mesocrystals exhibited a crystallographic hierarchy and were composed of perfectly or imperfectly aligned nanometer-thick crystallites. X-ray diffraction and spectroscopic analysis confirmed that the spherulites are a new solid form of curcumin. A theoretical hypothesis based on particle aggregation, double nucleation, and repeated secondary nucleation is proposed to explain the spherulite formation mechanism. The experimental results provide, for the first time, evidence for an organic molecule to naturally form spherulites without the presence of any stabilizing agents. Control experiments performed with highly supercooled pure solutions produced spherulites, confirming that the formation of spherulites is attributed to the high degree of supercooling and not due to the presence of impurities. Likewise, control experiments performed with a lower degree of supercooling produced impure crystals of curcumin via classical molecular addition mechanisms. Collectively, these experimental observations provide, for the first time, evidence for particle-mediated crystallization as an alternate and efficient method to purify organic compounds.
RESUMEN
This work investigated the technical feasibility of preparing, stabilizing and isolating poorly water-soluble drug nanoparticles via a small-scale antisolvent precipitation process operating in semi-continuous mode. Specifically, a novel semi-continuous process was demonstrated for the carrier particle mediated production, stabilization and isolation of valsartan nanoparticles into a solid form using montmorillonite clay particles as the carrier. The semi-continuous process operated robustly for the full duration of the experiment (~16 min) and steady-state conditions were reached after ~5 min. Nanoparticles of valsartan (51 ± 1 nm) were successfully prepared, stabilized and isolated with the help of montmorillonite (MMT) or protamine functionalized montmorillonite (PA-MMT) into the dried form by this semi-continuous route. The dissolution profile of the isolated valsartan nanocomposite solids was similar to that of valsartan nanocomposite solids produced via the corresponding laboratory scale batch mode process, indicating that the product quality (principally the nanoscale particle size and solid-state form) is retained during the semi-continuous processing of the nanoparticles. Furthermore, tablets produced via direct compression of the isolated valsartan nanocomposite solids displayed a dissolution profile comparable with that of the powdered nanocomposite material. PXRD, DSC, SSNMR and dissolution studies indicate that the valsartan nanoparticles produced via this semi-continuous process were amorphous and exhibited shelf-life stability equivalent to > 10 months.
Asunto(s)
Nanopartículas , Tamaño de la Partícula , Solubilidad , Comprimidos , ValsartánRESUMEN
The development of solid dosage forms and manufacturing processes are governed by complex physical properties of the powder and the type of pharmaceutical unit operation the manufacturing processes employs. Suitable powder flow properties and compactability are crucial bulk level properties for tablet manufacturing by direct compression. It is also generally agreed that small scale powder flow measurements can be useful to predict large scale production failure. In this study, predictive multilinear regression models were effectively developed from critical material properties to estimate static powder flow parameters from particle size distribution data for a single component and for binary systems. A multilinear regression model, which was successfully developed for ibuprofen, also efficiently predicted the powder flow properties for a range of batches of two other active pharmaceutical ingredients processed by the same manufacturing route. The particle size distribution also affected the compactability of ibuprofen, and the scope of this work will be extended to the development of predictive multivariate models for compactability, in a similar manner to the approach successfully applied to flow properties.
Asunto(s)
Excipientes/análisis , Polvos/análisis , Tecnología Farmacéutica , Química Farmacéutica , Tamaño de la Partícula , ComprimidosRESUMEN
The present work deals with measurements of the droplet size distribution in an ultrasonic atomizer using photographic analysis with an objective of understanding the effect of different equipment parameters such as the operating frequency, power dissipation and the operating parameters such as the flow rate and liquid properties on the droplet size distribution. Mechanistic details about the atomization phenomena have also been established using photographic analysis based on the capture of the growth of the instability and sudden ejection of droplets with high velocity. Velocity of these droplets has been measured by capturing the motion of droplets as streaks. It has been observed that the droplet size decreases with an increase in the frequency of atomizer. Droplet size distribution was found to change from the narrow to wider range with an increase in the intensity of ultrasound. The drop size was found to decrease with an increase in the fluid viscosity. The current work has clearly highlighted the approach for the selection of operating parameters for achieving a desired droplet size distribution using ultrasonic atomization and has also established the controlling mechanisms for the formation of droplet. An empirical correlation for the prediction of the droplet size has been developed based on the liquid and equipment operating properties.