Detecting antimony(III) on-site using novel gel-based techniques: Colorimetric diffusive equilibrium in thin films for two-dimensional imaging and surface-enhanced Raman scattering for sensitive quantification.

Antimony (Sb) pollution has raised increasing public concerns and its rapid on-site screening is central for the risk assessment. Herein, we proposed two gel-based methods based on colorimetric diffusive equilibrium in thin films (DET) and surface-enhanced Raman scattering (SERS), for two-dimensional imaging and sensitive detection of Sb(III) by revisiting the phenylfluorone (PhF) complexation reaction. PhF was well dispersed in the polyvinyl alcohol (PVA) hydrogel and reacted with Sb(III) in the DET gel to form a strong PhF-Sb(III) complex. The distribution of Sb(III) was easily visualized at a submillimeter resolution using computer imaging densitometry, with a detection limit (LOD) of ∼100 nmol L-1. Field application in the Sb mine area reveals limited dissolved Sb(III) penetrating the redox barrier below the sediment-water interface by 20 mm in rivers and tailing pond sediments. To improve the detection sensitivity and apply the principle to trace Sb quantification, a SERS platform was established by anchoring PhF on the hydrogel-stabilized Ag nanoparticles via C-O-Ag bonding to specifically detect Raman-inactive Sb(III). Benefiting from the high SERS activity of PhF and enrichment ability of hydrogel, Sb(III) was quantified with a LOD of 1.2-10.7 nmol L-1 depending on the sample volume. The coexisting ions at a 100-fold higher concentration than Sb(III) resulted in only 3.3-10.4 % variation in SERS intensity, indicating a negligible interference on the SERS platform. The platform exhibited a RSD of 6.6-13.1 % and acceptable recoveries for various environmental matrices, highlighting its promise in on-site application.

Procalcitonin and C-reactive protein as early predictors in patients at high risk of colorectal anastomotic leakage.

OBJECTIVE: To assess the diagnostic value of C-reactive protein (CRP) and procalcitonin (PCT) for anastomotic leakage (AL) following colorectal surgery. METHODS: We retrospectively analyzed data for patients who underwent colorectal surgery at our hospital between November 2019 and December 2023. CRP and PCT were measured postoperatively to compare patients with/without AL, and changes were compared between low- and high-risk groups. Receiver operating characteristic (ROC) curve analysis was used to assess the diagnostic accuracy of CRP and PCT to identify AL in high-risk patients. RESULTS: Mean CRP was 142.53 mg/L and 189.57 mg/L in the low- and high-risk groups, respectively, on postoperative day (POD)3. On POD2, mean PCT was 2.75 ng/mL and 8.16 ng/mL in low- and high-risk patients, respectively; values on POD3 were 3.53 ng/mL and 14.86 ng/mL, respectively. The areas under the curve (AUC) for CRP and PCT on POD3 were 0.71 and 0.78, respectively (CRP cut-off: 235.64 mg/L; sensitivity: 96%; specificity: 89.42% vs PCT cut-off: 3.94 ng/mL; sensitivity: 86%; specificity: 93.56%; AUC: 0.78). The AUC, sensitivity, and specificity for the combined diagnostic ability of CRP and PCT on POD3 were 0.92, 90%, and 100%, respectively (cut-off: 0.44). CONCLUSIONS: Combining PCT and CRP on POD3 enhances the diagnostic accuracy for AL.

Influence of gut microbiome on metabolic diseases: a new perspective based on microgravity.

Purpose: Microgravity, characterized by gravity levels of 10-3-10-6g, has been found to significantly impair various physiological systems in astronauts, including cardiovascular function, bone density, and metabolism. With the recent surge in human spaceflight, understanding the impact of microgravity on biological health has become paramount. Methods: A comprehensive literature search was performed using the PubMed database to identify relevant publications pertaining to the interplay between gut microbiome, microgravity, space environment, and metabolic diseases. Results: This comprehensive review primarily focuses on the progress made in investigating the gut microbiome and its association with metabolic diseases under microgravity conditions. Microgravity induces notable alterations in the composition, diversity, and functionality of the gut microbiome. These changes hold direct implications for metabolic disorders such as cardiovascular disease (CVD), bone metabolism disorders, energy metabolism dysregulation, liver dysfunction, and complications during pregnancy. Conclusion: This novel perspective is crucial for preparing for deep space exploration and interstellar migration, where understanding the complex interplay between the gut microbiome and metabolic health becomes indispensable.

Bone mesenchymal stem cells improve cholestatic liver fibrosis by targeting ULK1 to regulate autophagy through PI3K/AKT/mTOR pathway.

Cholestatic liver disease (CLD) is a severe disease, which can progress to liver cirrhosis, even liver cancer. Hepatic stellate cells (HSCs) activation plays a crucial role in CLD development. Bone mesenchymal stem cells (BMSCs) treatment was demonstrated to be beneficial in liver diseases. However, the therapeutic effect and mechanism of BMSCs on CLD are poorly known. In the present study, we investigated the therapeutic effects and underlying mechanisms of BMSCs transplantation in mouse models of bile duct ligation-induced cholestatic liver fibrosis (CLF). The results revealed that BMSCs significantly improved liver function and reduced the formation of fibrosis after portal vein transplantation. Mechanistically, after coculturing BMSCs and HSCs, we identified that BMSCs alleviated starvation-induced HSCs activation. Further, BMSCs inhibited HSCs activation by decreasing autophagy, and PI3K/AKT/mTOR pathway was involved in the regulation. More importantly, ULK1 is identified as the main autophagy-related gene regulated by BMSCs in HSCs autophagy. Overexpression of ULK1 reversed the suppression of HSCs autophagy by BMSCs. Collectively, our results provide a theoretical basis for BMSCs targeting ULK1 to attenuate HSCs autophagy and activation and suggest that BMSCs or ULK1 may be an alternative therapeutic approach/target for the treatment of CLF.

Bivariate extreme value analysis of extreme temperature and mortality in Canada, 2000-2020.

Climate change increases the risk of illness through rising temperature, severe precipitation and worst air pollution. This paper investigates how monthly excess mortality rate is associated with the increasing frequency and severity of extreme temperature in Canada during 2000-2020. The extreme associations were compared among four age groups across five sub-blocks of Canada based on the datasets of monthly T90 and T10, the two most representative indices of severe weather monitoring measures developed by the actuarial associations in Canada and US. We utilize a combined seasonal Auto-regressive Integrated Moving Average (ARIMA) and bivariate Peaks-Over-Threshold (POT) method to investigate the extreme association via the extreme tail index χ and Pickands dependence function plots. It turns out that it is likely (more than 10%) to occur with excess mortality if there are unusual low temperature with extreme intensity (all χ > 0.1 except Northeast Atlantic (NEA), Northern Plains (NPL) and Northwest Pacific (NWP) for age group 0-44), while extreme frequent high temperature seems not to affect health significantly (all χ ≤ 0.001 except NWP). Particular attention should be paid to NWP and Central Arctic (CAR) since population health therein is highly associated with both extreme frequent high and low temperatures (both χ = 0.3182 for all age groups). The revealed extreme dependence is expected to help stakeholders avoid significant ramifications with targeted health protection strategies from unexpected consequences of extreme weather events. The novel extremal dependence methodology is promisingly applied in further studies of the interplay between extreme meteorological exposures, social-economic factors and health outcomes.

Metalloestrogens exposure and risk of gestational diabetes mellitus: Evidence emerging from the systematic review and meta-analysis.

BACKGROUND: Metalloestrogens are metals and metalloid elements with estrogenic activity found everywhere. Their impact on human health is becoming more apparent as human activities increase. OBJECTIVE: Our aim is to conduct a comprehensive systematic review and meta-analysis of observational studies exploring the correlation between metalloestrogens (specifically As, Sb, Cr, Cd, Cu, Se, Hg) and Gestational Diabetes Mellitus (GDM). METHODS: PubMed, Web of Science, and Embase were searched to examine the link between metalloestrogens (As, Sb, Cr, Cd, Cu, Se, and Hg) and GDM until December 2023. Risk estimates were derived using random effects models. Subgroup analyses were conducted based on study countries, exposure sample, exposure assessment method, and detection methods. Sensitivity analyses and adjustments for publication bias were carried out to assess the strength of the findings. RESULTS: Out of the 389 articles identified initially, 350 met our criteria and 33 were included in the meta-analysis, involving 141,175 subjects (9450 cases, 131,725 controls). Arsenic, antimony, and copper exposure exhibited a potential increase in GDM risk to some extent (As: OR = 1.28, 95 % CI [1.08, 1.52]; Sb: OR = 1.73, 95 % CI [1.13, 2.65]; Cu: OR = 1.29, 95 % CI [1.02, 1.63]), although there is a high degree of heterogeneity (As: Q = 52.93, p < 0.05, I2 = 64.1 %; Sb: Q = 31.40, p < 0.05, I2 = 80.9 %; Cu: Q = 21.14, p < 0.05, I2 = 71.6 %). Conversely, selenium, cadmium, chromium, and mercury exposure did not exhibit any association with the risk of GDM in our study. DISCUSSION: Our research indicates that the existence of harmful metalloestrogens in the surroundings has a notable effect on the likelihood of GDM. Hence, we stress the significance of environmental elements in the development of GDM and the pressing need for relevant policies and measures.

Photo-responsive nanoporous liquid crystal polymer films for selective dye adsorption.

Photo-responsive nanoporous polymer films (AZOF-R(NC6)) have been developed by a template method based on a hydrogen-bonding supramolecular liquid crystal (LC) and a light-sensitive azobenzene LC crosslinker in this work. Anionic nanopores were obtained after the removal of template NC6 using KOH solution. The AZOF-R(NC6) demonstrates charge-selective dye adsorption and the maximum adsorption capacity for Rh6G is 504.6 mg g-1. The AZOF-R(NC6) film without UV light treatment shows a 32% higher adsorption capacity for Rh6G than the AZOF-R(NC6) film treated with UV light within the initial 10 min. In addition, UV light can trigger the release of the adsorbed dye from the polymer film due to the pore size change arising from the trans-cis isomerization. Besides, the used polymer film can be effectively regenerated using a HCl solution. Such functional polymer films with highly ordered nanopores and photo-responsive properties hold great promise in selective adsorption and mass separations.

Ultra-sensitive detection of tumor necrosis factor alpha based on silver-coated gold core shell and magnetically separated recognition of SERS aptamer sensors.

A highly sensitive tumor necrosis factor α (TNF-α) detection method based on a surface-enhanced Raman scattering (SERS) magnetic patch sensor is reported. Magnetic beads (MNPs) and core shells were used as the capture matrix and signaling probe, respectively. For this purpose, antibodies were immobilized on the surface of magnetic beads, and then Au@4-MBN@Ag core-shell structures coupled with aptamers and TNF-α antigen were added sequentially to form a sandwich immune complex. Quantitative analysis was performed by monitoring changes in the characteristic SERS signal intensity of the Raman reporter molecule 4-MBN. The results showed that the limit of detection (LOD) of the proposed method was 4.37 × 10-15 mg·mL-1 with good linearity (R2 = 0.9918) over the concentration range 10-12 to 10-5 mg·mL-1. Excellent assay accuracy was also demonstrated, with recoveries in the range 102% to 114%. Since all reactions occur in solution and are separated by magnetic adsorption of magnetic beads, this SERS-based immunoassay technique solves the kinetic problems of limited diffusion and difficult separation on solid substrates. The method is therefore expected to be a good clinical tool for the diagnosis of the inflammatory biomarker THF-α and in vivo inflammation screening.

Correction to " Application of Terahertz Nondestructive Testing Technology in the Detection of Polyethylene Pipe Defects".

[This corrects the article DOI: 10.1021/acsomega.3c02701.].

Localizing From Classification: Self-Directed Weakly Supervised Object Localization for Remote Sensing Images.

In recent years, object localization and detection methods in remote sensing images (RSIs) have received increasing attention due to their broad applications. However, most previous fully supervised methods require a large number of time-consuming and labor-intensive instance-level annotations. Compared with those fully supervised methods, weakly supervised object localization (WSOL) aims to recognize object instances using only image-level labels, which greatly saves the labeling costs of RSIs. In this article, we propose a self-directed weakly supervised strategy (SD-WSS) to perform WSOL in RSIs. To specify, we fully exploit and enhance the spatial feature extraction capability of the RSIs' classification model to accurately localize the objects of interest. To alleviate the serious discriminative region problem exhibited by previous WSOL methods, the spatial location information implicit in the classification model is carefully extracted by GradCAM ++ to guide the learning procedure. Furthermore, to eliminate the interference from complex backgrounds of RSIs, we design a novel self-directed loss to make the model optimize itself and explicitly tell it where to look. Finally, we review and annotate the existing remote sensing scene classification dataset and create two new WSOL benchmarks in RSIs, named C45V2 and PN2. We conduct extensive experiments to evaluate the proposed method and six mainstream WSOL methods with three backbones on C45V2 and PN2. The results demonstrate that our proposed method achieves better performance when compared with state-of-the-arts.

Impact of Poloxamer on Crystal Nucleation and Growth of Amorphous Clotrimazole.

Surfactants have been widely used as effective additives to increase the solubility and dissolution rates of amorphous solid dispersions (ASDs). However, they may also generate adverse effects on the physical stability of ASDs. In this study, we systematically investigated the impacts of poloxamer, a frequently used surfactant, on the crystallization of amorphous clotrimazole (CMZ). The added poloxamer significantly decreased the glass transition temperature (Tg) of CMZ and accelerated the growth of Form 1 and Form 2 crystals. It was found that the poloxamer had an accelerating effect on Form 1 and Form 2 but showed a larger accelerating effect on Form 1, which resulted from a combined effect of increased mobility and local phase separation at the crystal-liquid interface. Additionally, the added poloxamer exhibited different effects on nucleation of the CMZ polymorphs, which was more complicated than crystal growth. The nucleation rate of Form 1 was significantly increased by the added poloxamer, and the effect increased with increasing P407 content. However, for Form 2, nucleation was slightly decreased or unchanged. The nucleation of Form 2 may have been influenced by the Form 1 crystallization, and Form 2 converted to Form 1 during nucleation. This study increases our understanding of poloxamer and its impacts on the melt crystallization of drugs.

Fabrication of an S-Scheme Heterojunction Photocatalyst MoS2/PANI with Greatly Enhanced Photocatalytic Performance.

As a promising catalyst, MoS2 has been widely studied owing to its high chemical reactivity, excellent electrical carrier mobility, good optical properties, and narrow band gap. However, the high recombination rate of photoinduced charge carriers limits its practical application in photocatalysis. In this study, MoS2 was coupled with PANI to fabricate an S-scheme heterojunction MoS2/PANI. The synthesized products were characterized systematically, and their photocatalytic properties were evaluated by photocatalytic degradation of norfloxacin (NOR) and rhodamine B (RhB). The obtained results indicated that the fabricated MoS2/PANI inorganic-organic heterojunction displayed tremendously enhanced photocatalytic activity. The degradation efficiencies for 60 mg L-1 of NOR and RhB are 86 and 100% under the simulated sunlight irradiation for 1 h with 10 mg of catalyst, which are 13 and 47 times higher than those of pure MoS2, respectively. Interestingly, it is superior to the previously reported related materials. The remarkably enhanced photocatalytic activity of MoS2 is assigned to the high charge conductivity feature of PANI and the formed S-scheme heterojunction that result in a steric separation of holes and electrons and conserve the initial powerful redox ability of the parent catalysts. This study provides a facile method to greatly improve the photocatalytic activity of MoS2 and facilitates its application for highly efficient removal of organic pollutants, such as antibiotic drugs and organic dyes, utilizing solar energy.

Application of Terahertz Nondestructive Testing Technology in the Detection of Polyethylene Pipe Defects.

At present, polyethylene pipeline is widely used in urban gas projects, but a relatively mature and reliable nondestructive testing technology has not been formed. Therefore, it is urgent to develop a new nondestructive testing technology to meet the increasing demand for inspection of non-metallic pipes. The terahertz testing technology and related equipment have played an increasingly important role in the nondestructive testing of many nonmetallic structures, but they have not been applied to polyethylene (PE) pipes. In this work, terahertz time-domain spectroscopy was used to detect prefabricated defects inside the PE pipe specimens. The results show that the terahertz nondestructive testing technology can be used to detect common defects in nonblack PE pipes with a detection error of less than 10%. Higher-power terahertz devices can detect defects in black PE pipe, while lower-power terahertz devices cannot. Because the black PE pipe contains carbon and has a strong absorption of terahertz waves. The penetration of lower-power terahertz devices to the black PE pipe is not enough, resulting in a low resolution of the imaging. The results of this work may promote the progress of the nondestructive testing technology of nonmetallic pipelines.

The Effects of Selenium Supplementation in the Treatment of Autoimmune Thyroiditis: An Overview of Systematic Reviews.

OBJECTIVE: The available evidence on selenium supplementation in the treatment of autoimmune thyroiditis (AIT) was inconclusive. This research serves to assess the effects of selenium supplementation in the treatment of AIT. METHODS: Online databases including PubMed, Web of Science, Embase, and the Cochrane Library were searched from inception to 10 June 2022. The AMSTAR-2 tool was used to assess the methodological quality of included studies. The information on the randomized controlled trials of the included studies was extracted and synthesized. The GRADE system was used to assess the certainty of evidence. RESULTS: A total of 6 systematic reviews with 75 RCTs were included. Only one study was rated as high quality. The meta-analysis showed that in the levothyroxine (LT4)-treated population, thyroid peroxidase antibody (TPO-Ab) levels decreased significantly in the selenium group at 3 months (SMD = -0.53, 95% CI: [-0.89, -0.17], p < 0.05, very low certainty) and 6 months (SMD = -1.95, 95% CI: [-3.17, -0.74], p < 0.05, very low certainty) and that thyroglobulin antibody (Tg-Ab) levels were not decreased. In the non-LT4-treated population, TPO-Ab levels decreased significantly in the selenium group at 3 and 6 months and did not decrease at 12 months. Tg-Ab levels decreased significantly in the selenium group at 3 and 6 months and did not decrease at 12 months. The adverse effects reported in the selenium group were not significantly different from those in the control group, and the certainty of evidence was low. CONCLUSION: Although selenium supplementation might reduce TPO-Ab levels at 3 and 6 months and Tg-Ab levels at 3 and 6 months in the non-LT4-treated population, this was based on a low certainty of evidence.

Experimental Study on the Shear Strength and Failure Mechanism of Cemented Soil-Concrete Interface.

Cement is always used in underground construction to reinforce and improve soft clay, resulting in the formation of a cemented soil-concrete interface. It is of great importance to study interface shear strength and failure mechanisms. So, in order to figure out the failure mechanism and characteristics of a cemented soil-concrete interface, a series of large-scale shear tests of a cemented soil-concrete interface, and corresponding unconfined compressive tests and direct shear tests of cemented soil, were carried out specifically under different impact factors. A kind of bounding strength was observed during large-scale interface shearing. Resultantly, three stages of the shear failure process of the cemented soil-concrete interface are proposed, and bonding strength, peak (shear) strength and residual strength are pointed out, respectively, in interface shear stress-strain development. Based on the analysis results of the impact factors, the shear strength of the cemented soil-concrete interface increases with age, the cement mixing ratio and normal stress, and decreases with the water-cement ratio. Additionally, the interface shear strength grows much more rapidly after 14 d to 28 d compared to the early stage (1~7 d). Additionally, the shear strength of the cemented soil-concrete interface is positively related to unconfined compressive strength and shear strength. However, the trends of the bonding strength and unconfined compressive strength or shear strength are much closer than those of the peak and residual strength. This is considered to be related to the cementation of cement hydration products and probably the particle arrangement of the interface. Particularly, the cemented soil-concrete interface shear strength is always smaller than the cemented soil's own shear strength at any age.

Simulation on Heat Transfer and Emergency Protection of Tanks in a Tank Farm under Fire Scenario.

It is very important to understand the heat transfer process between storage tanks in a tank farm under a fire scenario, which is one of the key factors in determining the consequences of accident development. In this paper, a CFD simulation is used to study the heat transfer process and emergency protection of tanks under a fire scenario. The simulated results show that the changes in wind speed can affect the heat transfer of the tank farm. The highest temperature of the tanks at 5.3 m/s (wind speed) is 1432 K, while the highest temperature at 17.1 m/s (wind speed) is 1556 K. At the same time, the changes in wind direction can also affect the heat transfer of the tank farm. For the 45° east by north (wind direction), almost all tanks in the tank farm are affected by the fire. When the water curtain was applied as an emergency protection measure, the simulated highest temperature of the tanks decreased to 779 K (the cooling water intensity 6 L/min·m2), while the highest temperature of the tanks was 1432 K without water curtain protection under the actual fire conditions. The simulated highest temperature of the tanks decreased to 671 K when the emergency thermal insulation coating was sprayed on the surface of the tanks, which can effectively protect the adjacent tanks from being destroyed.

PROTOCOL: Treatment for depressive disorder among adults: An evidence and gap map of systematic reviews.

This is the protocol for a Campbell evidence and gap map. The objective of the map is to map available systematic reviews on the effectiveness of treatments for depressive disorders among adults. Specifically, this EGM includes studies on the effectiveness of treatments across a range of outcome domains.