RESUMEN
Increasing levels of boron in water exceeding acceptable thresholds have triggered concerns regarding environmental pollution and adverse health effects. In response, significant efforts are being made to develop new adsorbents for the removal of boron from contaminated water. Among the various materials proposed, inorganic adsorbents have emerged as promising materials due to their chemical, thermal, and mechanical stability. This review aims to comprehensively examine recent advances made in the development of inorganic adsorbents for the efficient removal of boron from water. Firstly, the adsorption performance of the most used adsorbents, such as magnesium, iron, aluminum, and individual and mixed oxides, are summarized. Subsequently, diverse functionalization methods aimed at enhancing boron adsorption capacity and selectivity are carefully analyzed. Lastly, challenges and future perspectives in this field are highlighted to guide the development of innovative high-performance adsorbents and adsorption systems, ultimately leading to a reduction in boron pollution.
RESUMEN
Nephrolithiasis is a multifactor disease that produces nephrolites in the kidneys. Calcium oxalate hydrate (dihydrated, COD, or monohydrated, COM) stones are the most common ones with more than sixty percent incidence worldwide. They are related to different pathologies, COD with hypercalciuria and COM with hyperoxaluria. COD is an unstable species and transforms into COM (herein named TRA to distinguish the origin of the monohydrated species). TRA and COM are chemically and crystallographically identical leading to misdiagnosis and recurrence increase. In the current study, the composition and crystalline structures of several calcium oxalate stones, classified by morpho-constitutional analysis, were examined by IR and synchrotron through-the-substrate micro-X-ray diffraction (tts-µXRD). Both IR and linear diffractogram studies were able to distinguish between the monohydrated and dihydrated phases but not between COM and TRA, as expected. The analysis of 2D diffraction patterns revealed that TRA showed a lower degree of crystallinity and less texture with respect to COM which can be used as a signature to distinguish between the two. This study confirms that despite the subtle differences between COM and TRA, the origin of the monohydrate oxalates can be unraveled using tts-µXRD. This valuable information should be taken into account in order to improve patients' diagnosis and reduce recurrence by considering and treating the origin of the formed stones.
Asunto(s)
Oxalato de Calcio , Cálculos Renales , Humanos , Oxalatos , Sincrotrones , Difracción de Rayos XRESUMEN
Kidney stones are collections of microcrystals formed inside the kidneys, which affect 6% to 12% of the population worldwide, with an increasing recurrence (50%-72%) after the first episode. The most abundant type is calcium oxalate (66%), described as monohydrated (COM) and dihydrated (COD). An issue in their chemistry is the transformation process of the metastable specie (COD) into the stable one, which is chemically, and in appearance, monohydrated. Since the origin of these species is different, it is important to differentiate between the transformation stage (and what stabilize COD) to understand the physiopathology and prevent the patients' recurrence. This work focuses on the organic matter distribution along these nephroliths by synchrotron radiation-based infrared microspectroscopy. Differences in the asymmetric stretching of the aliphatic hydrocarbons suggest that lipids may participate in the stabilization of COD and as inhibitors of COM formation/development; however, the presence of proteins in the nucleus could indicate a promoting role.
Asunto(s)
Oxalato de Calcio , Cálculos Renales , Humanos , Cálculos Renales/diagnóstico por imagen , SincrotronesRESUMEN
Calcium oxalate can be found in humans as kidney stones and in cultural heritage as films in two crystallographic species, dihydrate (COD/weddellite) and/or monohydrate (COM/whewellite). Due to its instability, COD is transformed into COM. Studying this crystalline conversion provides information about the origin of the monohydrated species, which will help in the assessment of prevention measurements to avoid their formation. In the present study, the synthesis of calcium oxalate hydrate microcrystals has been carefully performed to avoid mixture of phases in the final products; the long and short range order structure of both species have been studied by X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS), respectively. This structural information was considered in the density functional theory (DFT) computational study performed to assign the characteristic vibrational IR and Raman frequencies found. This detailed characterization allows an unambiguous assignment of the vibrations, thus providing the appropriate parameters required to monitor and characterize the transformation process.
RESUMEN
Tube membrane distillation (MD) integrated with a crystallization method is used in this study for the concurrent productions of pure water and salt crystals from concentrated single and mixed system solutions. The effects of concentrated Zn2+ and Ni2+ on performance in terms of membrane flux, permeate conductivity, crystal recovery rates, and crystal grades are investigated. Preferred crystallization and co-crystallization determinations were performed for mixed solutions. The results revealed that membrane fluxes remained at 2.61 kg·m-2·h-1 and showed a sharp decline until the saturation increased to 1.38. Water yield conductivity was below 10 µs·cm-1. High concentrated zinc and nickel did not have a particular effect on the rejection of the membrane process. For the mixed solutions, membrane flux showed a sharp decrease due to the high saturation, while the conductivity of permeate remained below 10 µs·cm-1 during the whole process. Co-crystallization has been proven to be a better method due to the existence of the SO42- common-ion effect. Membrane fouling studies have suggested that the membrane has excellent resistance to fouling from highly concentrated solutions. The MD integrated with crystallization proves to be a promising technology for treating highly concentrated heavy metal solutions.