RESUMEN
BACKGROUND: Navigated augmented reality (AR) through a head-mounted display (HMD) has led to accurate glenoid component placement in reverse shoulder arthroplasty (RSA) in an in-vitro setting. The purpose of this study is to evaluate the deviation between planned, intra-, and postoperative inclination, retroversion, entry point and depth of the glenoid component placement during RSA, assisted by navigated AR through a HMD, in a surgical setting. METHODS: A prospective, multicenter study was conducted. All consecutive patients undergoing RSA in two institutions, between August 2021 and January 2023, were considered potentially eligible for inclusion in the study. Inclusion criteria were: age >18 years, surgery assisted by AR through a HMD, and postoperative computed tomography (CT) scans at six weeks. All participants agreed to participate in the study and an informed consent was provided in all cases. Preoperative CT scans were undertaken for all cases and used for three-dimensional (3D) planning. Intra-operatively, glenoid preparation and component placement were assisted by a navigated AR system through a HMD in all patients. Intraoperative parameters were recorded by the system. A postoperative CT scan was undertaken at 6 weeks, and 3D reconstruction was used for obtaining postoperative parameters. The deviation between planned, intra-, and postoperative inclination, retroversion, entry point, and depth of the glenoid component placement was calculated. Outliers were defined as >5° for inclination and retroversion and >5 mm for entry point. RESULTS: 17 patients (9 females, 12 right shoulders) with a mean age of 72.8±9.1 years old (range, 47.0 to 82.0) met inclusion criteria. The mean deviation between intra- and postoperative measurements was 1.5°±1.0° (range, 0.0° to 3.0°) for inclination, 2.8°±1.5° (range, 1.0° to 4.5°) for retroversion, 1.8±1.0 mm (range, 0.7mm to 3.0mm) for entry point, and 1.9±1.9 mm (range, 0.0mm to 4.5mm) for depth. The mean deviation between planned and postoperative values was 2.5°±3.2° (range, 0.0° to 11.0°) for inclination, 3.4°±4.6° (range, 0.0° to 18.0°) for retroversion, 2.0±2.5 mm (range, 0.0° to 9.7°) for entry point, and 1.3±1.6 mm (range, 1.3mm to 4.5mm) for depth. There were no outliers between intra- and postoperative values and there were three outliers between planned and postoperative values. The mean time (minutes:seconds) for the tracker unit placement and the scapula registration was 03:02 (range, 01:48 to 04:26) and 08:16 (range, 02:09 to 17:58), respectively. CONCLUSION: The use of a navigated AR system through a HMD in RSA led to low deviations between planned, intra-operative and postoperative parameters for glenoid component placement.
RESUMEN
The primary controls for charcoal rot in soybean, caused by the fungal pathogen Macrophomina phaseolina, are to avoid drought stress and to plant a moderately resistant cultivar. The effects of irrigation and cultivar were determined in 2011 and 2013 at the Lon Mann Cotton Research Station, Marianna, AR. Four soybean cultivars (Hutcheson, Osage, Ozark, and R01581F), were planted in plots with or without added M. phaseolina inoculum and subjected to three furrow irrigation regimes: full season irrigation (Full), irrigation terminated at R5 (CutR5), and non-irrigated (NonIrr). Normalized difference vegetative index (NDVI) was measured at R3 and R6. At harvest, plants and yields were collected. Roots and stems were split and the extent of visible colonization by M. phaseolina microsclerotia was assessed in the roots with a 1-5 scale (RSS) and the percent plant height stem discoloration (PHSD) measured. Precipitation in September and October was 54 and 65% below the 30-year average in 2011 and 2013, respectively. The CutR5 irrigation treatment resulted in one less irrigation than Full each year, but CutR5 NDVI's at R6 and yields were significantly lower than those with Full and not significantly different than those of NonIrr. The CutR5 RSS ratings were greater than either Full or NonIrr. Plant colonization by M. phaseolina was negatively correlated to yield in 2011 but not in 2013. No premature plant death caused by charcoal rot was observed in either year. These results indicated that late season drought stress may be more important to charcoal rot development than drought stress throughout the season, but other factors are needed to trigger early plant death and subsequent yield losses observed in grower fields.
RESUMEN
We present the case of a 68-year-old female who presented with a substantial cyclodialysis after phacoemulsification identified by anterior segment optical coherence tomography and ultrasound biomicroscopy. Gonioscopy is challenging because of its shallow anterior chamber. Due to lack of response to topical steroids and refusal by the patient for surgical treatment, topical steroids were tapered, and cycloplegic was initiated. After two weeks, the cyclodialysis cleft was closed on optical coherence tomography persisting residual subchoroidal fluid, topical treatment was mantained. Despite of this, visual acuity and hypotony were restored. Finally at 2 months visit subchoroidal fluid was reabsorbed and patient was discharged. Clinics should consider the possibility of cyclodialysis in cases of unjustified hypotony during postoperative period. In addition, we recommend performing anterior segment imaging which includes ultrasound biomicroscopy and optical coherence tomography, when the evaluation of angular structures is unfeasible. Finally, we propose medical management for severe cyclodialysis as the first option considering anti-inflammatory drugs could perpetrate the separation between scleral spur and ciliary muscle.
RESUMEN
Introduction: Osteoarthritis (OA) and rotator cuff tear (RCT) pathologies have distinct scapular morphologies that impact disease progression. Previous studies examined the correlation between scapular morphology and glenohumeral joint biomechanics through critical shoulder angle (CSA) variations. In abduction, higher CSAs, common in RCT patients, increase vertical shear force and rotator cuff activation, while lower CSAs, common in OA patients, are associated with higher compressive force. However, the impact of the complete patient-specific scapular morphology remains unexplored due to challenges in establishing personalized models. Methods: CT data of 48 OA patients and 55 RCT patients were collected. An automated pipeline customized the AnyBody™ model with patient-specific scapular morphology and glenohumeral joint geometry. Biomechanical simulations calculated glenohumeral joint forces and instability ratios (shear-to-compressive forces). Moment arms and torques of rotator cuff and deltoid muscles were analyzed for each patient-specific geometry. Results and discussion: This study confirms the increased instability ratio on the glenohumeral joint in RCT patients during abduction (mean maximum is 32.80% higher than that in OA), while OA patients exhibit a higher vertical instability ratio in flexion (mean maximum is 24.53% higher than that in RCT) due to the increased inferior vertical shear force. This study further shows lower total joint force in OA patients than that in RCT patients (mean maximum total force for the RCT group is 11.86% greater than that for the OA group), attributed to mechanically advantageous muscle moment arms. The findings highlight the significant impact of the glenohumeral joint center positioning on muscle moment arms and the total force generated. We propose that the RCT pathomechanism is related to force magnitude, while the OA pathomechanism is associated with the shear-to-compressive loading ratio. Overall, this research contributes to the understanding of the impact of the complete 3D scapular morphology of the individual on shoulder biomechanics.
RESUMEN
Aim: To analyze the association between clavicular tunnel positioning and postoperative reduction loss in patients with acute acromioclavicular (AC) joint dislocation treated with anatomic coracoclavicular (CC) fixation using double clavicular tunnels. Methods: A retrospective review of patients with AC joint dislocation, treated with anatomic CC fixation using double clavicular tunnels, was conducted. Patients with pre-operative, immediate post-operative, and final follow-up Zanca-view X-rays were included. On each X-ray, the obtained measures included: distance from lateral border of clavicle to trapezoid and conoid tunnels, distance between tunnels, clavicle length, and CC distance of affected and un-affected sides. Loss of reduction was calculated as CC distance difference between immediate and final post-operative X-rays. Association between reduction loss and tunnel positioning was analyzed. Results: Conoid, trapezoid and tunnel ratios were 24% ± 4, 15% ± 3, and 9% ± 2, respectively. Significant reduction loss was seen in 21(45.7%) patients. Significantly higher probabilities of reduction loss were associated with trapezoid tunnels placed medial to 24â mm (30.8% vs 65.0%, OR 4.2 (IC95%: 1.2-14.4), p: 0.024) or 15% of the clavicle length (32.1% vs 66.7%, OR 4.2 (IC 95%: 1.2-14.9), p: 0.025). Conclusions: Trapezoid tunnels placed medial to 24â mm or 15% medial to clavicle length could lead to higher probabilities of significant reduction loss. These findings support the importance of clavicular tunnels' proper placement for decreasing significant reduction loss.
RESUMEN
BACKGROUND: Tendon transfers are established techniques to regain external rotation mobility in patients with an irreparable, posterosuperior massive rotator cuff tear (MRCT). Posterosuperior MRCT with intact teres minor (type D MRCT) can lead to excessive teres minor loading to maintain external rotation. We hypothesize that tendon transfers are effective in relieving teres minor loading in type D MRCTs. Our aim was to biomechanically assess muscle synergism with latissimus dorsi (LD transfer) and lower trapezius (LT transfer) tendon transfer during external rotation at different abduction heights. METHODS: Using musculoskeletal modeling, we analyzed and compared the moment arm, muscle torque, and muscle activity between a healthy and type D MRCT pathologic model with and without the LD- or LT transfer at infraspinatus and teres minor insertion sites. Output measures were analyzed during external rotation at different abduction angles and 10-50 N resistance against external rotation. We assessed its impact on teres minor loading in a type D MRCT. Morphologic variations were parameterized using the critical shoulder angle and the acromiohumeral distance to address variations among patients. RESULTS: Both transfer types reduced teres minor torque and activity significantly, reaching physiological state at 40 N external resistance (P < .001), with insertion to infraspinatus site being more effective than teres minor site (P < .001). External rotation moment arms of LD transfer were larger than LT transfer at 90° abduction (25.1 ± 0.8 mm vs. 21.2 ± 0.6 mm, P < .001) and vice versa at 0° abduction (17.4 ± 0.5 mm vs. 24.0 ± 0.2 mm, P < .001). Although the healthy infraspinatus was the main external rotator in all abduction angles (50%-70% torque), a type D MRCT resulted in a 70%-90% increase of teres minor torque and an up to 7-fold increase in its activity leading to excessive loadings beyond 10 N resistance against external rotation. Varying the critical shoulder angle and the acromiohumeral distance led to minor variations in muscle moment arm and muscle activity. CONCLUSION: We identified biomechanical efficacy of both tendon transfers in type D MRCT regarding teres minor load relief and superior performance of the transfers at the infraspinatus insertion site.
RESUMEN
INTRODUCTION: The primary objective of the core data set is to reduce heterogeneity and promote harmonization among data sources in EM, thereby reducing the time needed to execute real life data collection efforts. Recently, a group led by the Multiple Sclerosis Data Alliance has developed a core data set for collecting real-world data on multiple sclerosis (MS) globally. Our objective was to adapt this global data set to the needs of Latin America, so that it can be implemented by the registries already developed and in the process of development in the region. MATERIAL AND METHODS: A working group was formed regionally, the core data set created globally was adapted (translation process into Spanish, incorporation of regional variables and consensus on variables to be used). Consensus was obtained through the remote Delphi methodology of a round of questionnaires and remote discussion of the core data set variables. RESULTS: A total of 25 professionals from Latin America carried out the adaptation process between November 2022 and July 2023. Agreement was established on a core data set of nine categories and 45 variables, version 2023 to suggest its implementation in developed or developing registries, and MS cohorts in the region. CONCLUSION: The core data set seeks to harmonize the variables collected by registries and cohorts in MS in Latin America in order to facilitate said collection and allow collaboration between sources. Its implementation will facilitate real life data collection and collaboration in the region.
TITLE: Core data set para la generación de datos de la vida real en esclerosis múltiple: adaptación de una iniciativa global para América Latina.Introducción. Los objetivos primarios del core data set son reducir la heterogeneidad y promover la armonización entre las fuentes de datos en la esclerosis múltiple (EM), reduciendo así el tiempo necesario para ejecutar esfuerzos en la recolección de datos de vida real. Recientemente, un grupo liderado por la Multiple Sclerosis Data Alliance ha desarrollado un core data set para la recolección de datos del mundo real en EM a nivel global. Nuestro objetivo ha sido adaptar y consensuar este conjunto de datos globales a las necesidades de América Latina para que pueda ser implementado por los registros ya desarrollados y en proceso de desarrollo en la región. Material y métodos. Se conformó un grupo de trabajo regionalmente y se adaptó el core data set creado globalmente (proceso de traducción al español, incorporación de variables regionales y consenso sobre variables que se iban a utilizar). El consenso se obtuvo a través de la metodología Delphi remoto de ronda de cuestionarios y discusión a distancia de las variables del core data set. Resultados. Veinticinco profesionales de América Latina llevaron adelante el proceso de adaptación entre noviembre de 2022 y julio de 2023. Se estableció un acuerdo sobre un core data set de nueve categorías y 45 variables, versión 2023, con la sugerencia de implementarlo en registros desarrollados o en vías de desarrollo y cohortes de EM en la región. Conclusión. El core data set busca armonizar las variables recolectadas por los registros y las cohortes de EM en América Latina con el fin de facilitar dicha recolección y permitir una colaboración entre fuentes. Su implementación facilitará la recolección de datos de vida real y la colaboración en la región.
Asunto(s)
Esclerosis Múltiple , Humanos , América Latina/epidemiología , Esclerosis Múltiple/epidemiología , Comités Consultivos , Consenso , Sistema de RegistrosRESUMEN
Mining environmental liabilities generate environmental pollution. The objective of the present study was to determine the yield of white clover (Trifolium repens) and orchard grass (Dactylis glomerata) cultivated in mining environmental passives adding black earth and compost as a substrate in the Buenaventura Julcani Huancavelica Company. The treatments were the combinations: 4: 3.1: 3.1: 3:1.1 kg of RP: RP, TN: RP, C: RP, TN, C respectively. They were distributed in four treatments with twelve experimental units for each species of leguminous and gramineous grass, we worked according to the completely randomized design (DCA) with a 2 x 4 factorial arrangement, the experimental unit being a treatment with twelve repetitions. The variables evaluated were: germination percentage (TG) and stem survival percentage (TST). For the statistical analysis, the SPSS software was used.
Asunto(s)
Compostaje , Trifolium , Dactylis , Medicago , Distribución AleatoriaRESUMEN
Cancer immunotherapies strive to overcome tumor-induced immune suppression and activate antitumor immune responses. Although cytotoxic T lymphocytes (CTLs) play a pivotal role in this process, natural killer (NK) cells have also demonstrated remarkable tumor-killing abilities, given their ability to discriminate tumor cells from normal cells and mediate specific antitumoral cytotoxicity. NK cells activation depends on a balance between activation and inhibition signals from several ligands/receptors. Among them, MICA/NKG2D axis is a master regulator of NK activation. MHC class I chain-related polypeptide A (MICA) expression is upregulated by many tumor cell lines and primary tumors and serves as a ligand for the activating NK group 2D (NKG2D) receptor on NK cells and subpopulations of T cells. However, cancer cells can cleave MICA, making it soluble and de-targeting tumor cells from NK cells, leading to tumor immune escape.In this study, we present ICOVIR15KK-MICAMut, an oncolytic adenovirus (OAdv) armed with a transgene encoding a non-cleavable MICA to promote NK-mediated cell-killing capacity and activate the immune response against cancer cells. We first demonstrated the correct MICA overexpression from infected cells. Moreover, our MICA-expressing OAdv promotes higher NK activation and killing capacity than the non-armed virus in vitro. In addition, the armed virus also demonstrated significant antitumor activity in immunodeficient mice in the presence of human PBMCs, indicating the activation of human NK cells. Finally, OAdv-MICA overexpression in immunocompetent tumor-bearing mice elicits tumor-specific immune response resulting in a greater tumor growth control.In summary, this study highlights the significance of NK cells in cancer immunotherapy and presents an innovative approach using a modified oncolytic virus to enhance NK cell activation and antitumor immune response. These findings suggest promising potential for future research and clinical applications.
Asunto(s)
Adenoviridae , Subfamilia K de Receptores Similares a Lectina de Células NK , Humanos , Animales , Ratones , Adenoviridae/genética , Subfamilia K de Receptores Similares a Lectina de Células NK/genética , Activación de Linfocitos , Genes MHC Clase I , Escape del TumorRESUMEN
Multi-locus sequence data are widely used in fungal systematic and taxonomic studies to delimit species and infer evolutionary relationships. We developed and assessed the efficacy of a multi-locus pooled sequencing method using PacBio long-read high-throughput sequencing. Samples included fresh and dried voucher specimens, cultures and archival DNA extracts of Agaricomycetes with an emphasis on the order Cantharellales. Of the 283 specimens sequenced, 93.6% successfully amplified at one or more loci with a mean of 3.3 loci amplified. Our method recovered multiple sequence variants representing alleles of rDNA loci and single copy protein-coding genes rpb1, rpb2 and tef1. Within-sample genetic variation differed by locus and taxonomic group, with the greatest genetic divergence observed among sequence variants of rpb2 and tef1 from corticioid Cantharellales. Our method is a cost-effective approach for generating accurate multi-locus sequence data coupled with recovery of alleles from polymorphic samples and multi-organism specimens. These results have important implications for understanding intra-individual genomic variation among genetic loci commonly used in species delimitation of fungi.
Asunto(s)
Agaricales , Análisis de Secuencia de ADN , Filogenia , Variación Genética , Secuenciación de Nucleótidos de Alto Rendimiento , HongosRESUMEN
Sudden death syndrome (SDS), caused by Fusarium virguliforme, is an important yield-limiting disease of soybean (Glycine max). From 1996 to 2022, cumulative yield losses attributed to SDS in North America totaled over 25 million metric tons, which was valued at over US $7.8 billion. Seed treatments are widely used to manage SDS by reducing early season soybean root infection by F. virguliforme. Fluopyram (succinate dehydrogenase inhibitor [SDHI] - FRAC 7), a fungicide seed treatment for SDS management, has been registered for use on soybean in the United States since 2014. A baseline sensitivity study conducted in 2014 evaluated 130 F. virguliforme isolates collected from five states to fluopyram in a mycelial growth inhibition assay and reported a mean EC50 of 3.35 mg/liter. This baseline study provided the foundation for the objectives of this research: to detect any statistically significant change in fluopyram sensitivity over time and geographical regions within the United States and to investigate sensitivity to the fungicide pydiflumetofen. We repeated fluopyram sensitivity testing on a panel of 80 historical F. virguliforme isolates collected from 2006 to 2013 (76 of which were used in the baseline study) and conducted testing on 123 contemporary isolates collected from 2016 to 2022 from 11 states. This study estimated a mean absolute EC50 of 3.95 mg/liter in isolates collected from 2006 to 2013 and a mean absolute EC50 of 4.19 mg/liter in those collected in 2016 to 2022. There was no significant change in fluopyram sensitivity (P = 0.1) identified between the historical and contemporary isolates. A subset of 23 isolates, tested against pydiflumetofen under the same conditions, estimated an absolute mean EC50 of 0.11 mg/liter. Moderate correlation was detected between fluopyram and pydiflumetofen sensitivity estimates (R = 0.53; P < 0.001). These findings enable future fluopyram and pydiflumetofen resistance monitoring and inform current soybean SDS management strategies in a regional and national context.
Asunto(s)
Fungicidas Industriales , Fusarium , Glycine max , Enfermedades de las Plantas , Fusarium/efectos de los fármacos , Fusarium/aislamiento & purificación , Fungicidas Industriales/farmacología , Glycine max/microbiología , Estados Unidos , Enfermedades de las Plantas/microbiología , Compuestos de Anilina/farmacología , Farmacorresistencia Fúngica , Benzamidas , PiridinasRESUMEN
INTRODUCTION: in patients with anterior glenohumeral (GH) instability together with an off-track or engaging Hill-Sachs (HS) defect, Bankart-remplissage (B-R) surgery reduces the recurrence rate when compared to Bankart (B) surgery alone. There is controversy regarding whether the recurrence rate also decreases in patients with on-track or non-engaging Hill-Sachs defects. OBJECTIVE: to compare the recurrence rate and clinical evolution of patients with anterior glenohumeral instability with 'on-track' Hill-Sachs defect treated with either B or B-R surgery. MATERIAL AND METHODS: non-randomized, retrospective, single-center cohort study of patients with anterior glenohumeral instability and on-track Hill-Sachs defect, operated between January 2010 and December 2018. Patients operated with B versus B-R were compared. Recurrence, complications and re-operation were recorded. In addition, VAS, SSV, WOSI and qDASH scores were obtained and compared in both groups. RESULTS: of the 105 patients who met the inclusion criteria, 78 (74.3%) patients had a complete follow-up (52 B and 26 B-R, 4.3 years median follow-up). There was a higher recurrence rate in group B compared to B-R, with this difference not reaching statistical significance (17.3% vs 7.7%, p = 0.21). There were no significant differences in residual pain, feeling of instability, complications or VAS, qDASH, SSV or WOSI scores between both groups. In the subgroup analysis, patients who practiced contact sports and were operated with B showed higher recurrence rates (24.1% vs 0%, p = 0.08) and complications (41.4% vs 18.2%, p = 0.16) when compared to B + R, although these differences were not significant. CONCLUSION: there were no significant differences in recurrence rates and functional evolution between patients with anterior glenohumeral instability operated with B or B-R surgery. Comparative, prospective studies should be performed to establish definitive recommendations.
INTRODUCCIÓN: en pacientes con inestabilidad glenohumeral (GH) anterior con defecto de Hill-Sachs (HS) off-track o enganchante, Bankart-remplissage (B + R) reduce tasa de recurrencia en comparación a Bankart aislado (B). Hay controversia si tasa de recurrencia también disminuye en pacientes con defecto de HS on-track o no enganchantes. OBJETIVO: comparar la tasa de recurrencia y evolución clínica entre la cirugía de B versus B-R en pacientes operados por inestabilidad glenohumeral anterior con defecto de Hill-Sachs on-track. MATERIAL Y MÉTODOS: estudio de cohorte, no randomizado, retrospectivo y unicéntrico, en pacientes operados por inestabilidad glenohumeral anterior, entre Enero 2010 y Diciembre de 2018. Se incluyen sólo pacientes con defecto de Hill-Sachs on-track. Fueron comparados pacientes operados con cirugía de B versus B + R. Se consigna recurrencia, complicación, reoperación y sensación de inestabilidad. Además, se realizan y comparan puntajes de EVA, SSV, WOSI y qDASH. RESULTADOS: de los 105 pacientes que cumplieron criterios de inclusión, 78 (74.3%) realizaron seguimiento completo (52 B y 26 B + R, 4.3 años mediana de seguimiento). Hubo mayor tasa de recurrencia en grupo B en comparación a B + R, siendo esta diferencia no significativa (17.3% versus 7.7%, p = 0.21). No hubo diferencia significativa en dolor residual, sensación de inestabilidad residual, complicaciones o puntajes de escala EVA, qDASH, SSV ni WOSI. En análisis por subgrupo, pacientes con deportes de contacto, B tienen mayor tasa de recurrencia (24.1% versus 0%, p = 0.08) y complicaciones comparadas con B + R (41.4% versus 18.2%, p = 0.16), siendo estas diferencias no significativas. CONCLUSIÓN: no hubo diferencias significativas en tasa de recurrencia y evolución funcional entre cirugía de Bankart aislado o Bankart-remplissage para inestabilidad glenohumeral anterior asociada a defecto de Hill-Sachs on-track. Estudios comparativos, prospectivos deben realizarse para establecer recomendaciones definitivas.
Asunto(s)
Lesiones de Bankart , Inestabilidad de la Articulación , Luxación del Hombro , Articulación del Hombro , Humanos , Articulación del Hombro/cirugía , Estudios de Cohortes , Luxación del Hombro/cirugía , Estudios Retrospectivos , Hombro , Estudios Prospectivos , Inestabilidad de la Articulación/cirugía , Inestabilidad de la Articulación/etiología , Artroscopía , Lesiones de Bankart/cirugía , RecurrenciaRESUMEN
Shoulder stiffness is a frequent complication after proximal humeral fractures treated with or without surgery. Shoulder stiffness is associated with high rates of absence from work and a significant financial burden for the healthcare system. Secondary stiffness is characterized by additional extracapsular adhesions, including subacromial, subcoracoid, and subdeltoid spaces, usually derived from post-fracture or post-surgical extraarticular hematomas. Several secondary causes may coexist with capsular and extracapsular adhesions decreasing the shoulder motion, such as malunion, nonunion, metalwork failure, infection, and osteoarthritis, among others. Conservative treatment, usually prescribed for primary shoulder stiffness, has shown unfavorable results in secondary stiffness, and surgical intervention may be required. Surgical interventions need to be patient-specific. Usually, open or arthroscopic fibro-arthrolysis and subacromial release are performed, together with plate removal and biceps tenotomy/tenodesis. In severe osteoarthritis, shoulder replacement may be indicated. Ruling out infection is recommended in every case.
RESUMEN
OBJECTIVES: This study aimed to establish basal biomarkers in patients with bone metastatic castration-resistant prostate cancer (mCRPC) treated with 223Ra to predict better overall survival (OS), and assess hematologic toxicity and treatment response. MATERIALS AND METHODS: This was a retrospective multicenter study including 151 patients with mCRPC between 2013 and 2020. OS was assessed according to basal hemoglobin (Hb), prostate-specific antigen (PSA), and alkaline phosphatase (AP) values, the World Health Organization pain scale, the Eastern Cooperative Oncology Group (ECOG) performance status scale, the number of metastatic lesions on bone scintigraphy (BS), and the use of protective bone agents and the dose received. The grade of hematological toxicities was evaluated as well as treatment response based on changes in AP and pre- and post-treatment pain. RESULTS: The median OS was 24 months (95% confidence interval 16.5-31). The OS in 70% of patients who received complete (5-6 doses) versus incomplete (1-4 doses) 223Ra treatment was 34.9 vs. 5.8 months, respectively, being longer in patients with lower PSA and AP values, Hb >13â¯g/dl, lesser bone metastasis on bone scan and with an ECOG 0-1. 52/151 patients (34%) died during follow-up. Pain reduced in nearly 70% of patients and 66% presented a reduction in AP values. Half of the patients presented mild and 5 % severe hematological adverse effects. CONCLUSIONS: mCRPC patients treated with 223Ra with Hb values >13â¯g/mL, an ECOG 0-1, low AP values, PSAâ¯<â¯20â¯ng/mL and lesser bone metastasis on BS presented a better OS with an adequate safety profile.
Asunto(s)
Neoplasias Óseas , Neoplasias de la Próstata Resistentes a la Castración , Masculino , Humanos , Pronóstico , Neoplasias de la Próstata Resistentes a la Castración/diagnóstico por imagen , Neoplasias de la Próstata Resistentes a la Castración/radioterapia , Neoplasias de la Próstata Resistentes a la Castración/patología , Antígeno Prostático Específico , Neoplasias Óseas/diagnóstico por imagen , Neoplasias Óseas/radioterapia , Neoplasias Óseas/secundario , Dolor , CastraciónRESUMEN
A populational, observational and longitudinal-retrospective study with records of 28 dairy-specialized and dual-purpose farms was carried out to compare the productive performance of cows born by embryo transfer (ET), artificial insemination (AI) and natural mating (NM), using the database of Centro Regional de Investigación para la Producción Animal Sostenible (CRIPAS) of cattle herds in Costa Rica. Herds (system × altitude), conception method (ET, AI and NM), genetic background (DSpB: specialized dairy breeds [Bos taurus] and crosses, GYR × HOL: Gyr × Holstein Crossbred and DSpB × BI: crosses between dairy breeds and Bos indicus), year of birth (or at calving), lactation number and days in milk were evaluated for the productive parameters age at first calving (AFC), calving to conception interval (CCI) and lactation milk yield (LMY) using a GLIMMIX procedure on SAS. The AFC, CCI and LMY were affected (p < .0001) by all factors considered in each parameter. ET has lower (p < .0001) AFC in months (33.1) than AI (35.2) and NM (36.44). NM had lower (p = .004) CCI (110 days) than AI or ET (121 days) values which were similar (p > .05). The higher LMY (p < .0001) was observed in ET (4140 kg), compared to AI (3706 kg) and NM (3595 kg). There was no difference between AI and NM. In conclusion, the method of conception in calves affected their future reproduction and production during puberty, postpartum and lactation. The effects on management decisions will require a rigorous economical study to discern whether ET would be a cost-effective alternative to AI or NM.
Asunto(s)
Reproducción , Clima Tropical , Femenino , Bovinos , Animales , Estudios Retrospectivos , Lactancia , Leche , Inseminación Artificial/veterinaria , Inseminación Artificial/métodos , Transferencia de Embrión/veterinariaRESUMEN
BACKGROUND: Navigated augmented reality (AR) through a head-mounted display (HMD) may lead to accurate glenoid component placement in reverse shoulder arthroplasty (RSA). The purpose of this study is to evaluate the deviation between planned, intra- and postoperative inclination, retroversion, entry point, depth, and rotation of the glenoid component placement assisted by a navigated AR through HMD during RSA. METHODS: Both shoulders of 6 fresh frozen human cadavers, free from fractures or other bony pathologies, were used. Preoperative computed tomography (CT) scans were used for the 3-dimensional (3D) planning. The glenoid component placement was assisted using a navigated AR system through an HMD in all specimens. Intraoperative inclination, retroversion, depth, and rotation were measured by the system. A postoperative CT scan was performed. The pre- and postoperative 3D CT scan reconstructions were superimposed to calculate the deviation between planned and postoperative inclination, retroversion, entry point, depth, and rotation of the glenoid component placement. Additionally, a comparison between intra- and postoperative values was calculated. Outliers were defined as >10° inclination, >10° retroversion, >3 mm entry point. RESULTS: The registration algorithm of the scapulae prior to the procedure was correctly completed for all cases. The deviations between planned and postoperative values were 1.0° ± 0.7° for inclination, 1.8° ± 1.3° for retroversion, 1.1 ± 0.4 mm for entry point, 0.7 ± 0.6 mm for depth, and 1.7° ± 1.6° for rotation. The deviation between intra- and postoperative values were 0.9° ± 0.8° for inclination, 1.2° ± 1.1° for retroversion, 0.6 ± 0.5 mm for depth, and 0.3° ± 0.2° for rotation. There were no outliers between planned and postoperative parameters. CONCLUSION: In this study, the use of a navigated AR system through an HMD for RSA led to low deviation between planned and postoperative values and between intra- and postoperative parameters.
Asunto(s)
Artroplastía de Reemplazo de Hombro , Realidad Aumentada , Cavidad Glenoidea , Articulación del Hombro , Humanos , Articulación del Hombro/diagnóstico por imagen , Articulación del Hombro/cirugía , Artroplastía de Reemplazo de Hombro/métodos , Escápula/cirugía , Artroplastia , Cavidad Glenoidea/cirugíaRESUMEN
BACKGROUND: Choosing the optimal treatment for massive rotator cuff tears (MRCTs) still poses a surgical problem. In MRCTs with good muscle quality, but short tendon length, nonaugmented repairs lead to high failure rates of up to 90%. The aim of the study was to evaluate midterm clinical and radiologic outcomes of massive rotator cuff tears with good muscle quality, but short tendon length, which were repaired with synthetic patch augmentation. METHODS: A retrospective study of patients who underwent arthroscopic or open rotator cuff repairs with patch augmentation between 2016 and 2019 was performed. We included patients older than 18 years, who presented with an MRCT confirmed by an magnetic resonance imaging (MRI) arthrogram showing good muscle quality (Goutallier ≤ II) and short tendon length (length <15 mm). Constant-Murley score (CS), Subjective Shoulder Value (SSV), and range of motion (ROM) were compared pre- and postoperatively. We excluded patients older than 75 years or with presence of rotator cuff arthropathy Hamada stage ≥2a. Patients were followed up for 2 years minimum. Clinical failures were defined by reoperation, forward flexion <120° or a relative CS < 70. Structural integrity of the repair was assessed using an MRI scan. Comparison between different variables and outcomes was performed using Wilcoxon-Mann-Whitney and χ2 tests. RESULTS: Fifteen patients (mean age 57 years, 13 [86.7%] male, 9 [60%] right shoulders) were reevaluated with a mean follow-up of 43.8 months (27-55 months). There was a significant improvement in the absolute CS (from 33 to 81 points, P = .03), the relative CS (from 41% to 88%, P = .04), the SSV (from 31% to 93%, P = .007), and forward flexion (from 111° to 163°, P = .004) but not in external rotation (from 37° to 38°, P = .5). There were 3 clinical failures (1 atraumatic, 2 traumatic) with reoperations (2 reverse total shoulder arthroplasties and 1 refixation). Structurally, there were 3 Sugaya grade 4 and 5 Sugaya grade 5 reruptures resulting in a retear rate of 53%. The presence of a complete or partial rerupture was not associated with inferior outcomes compared with intact cuff repairs. There were no correlations between the grade of retraction, muscle quality, or rotator cuff tear configuration and rerupture or functional outcomes. CONCLUSION: Patch augmented cuff repair leads to a significant improvement of functional and structural outcomes. Partial reruptures were not associated with inferior functional outcomes. Prospective randomized trials are needed to confirm the results found in our study.
Asunto(s)
Lesiones del Manguito de los Rotadores , Humanos , Masculino , Persona de Mediana Edad , Femenino , Lesiones del Manguito de los Rotadores/diagnóstico por imagen , Lesiones del Manguito de los Rotadores/cirugía , Estudios Retrospectivos , Estudios Prospectivos , Resultado del Tratamiento , Manguito de los Rotadores/diagnóstico por imagen , Manguito de los Rotadores/cirugía , Imagen por Resonancia Magnética , Artroscopía/métodos , Rango del Movimiento ArticularRESUMEN
BACKGROUND: The management of acromioclavicular (AC) joint dislocation remains controversial. Recently, anatomic coracoclavicular (CC) fixation with a double clavicular tunnel and three flip-buttons has shown promising results. This study aimed to evaluate functional and radiological outcomes in patients with high-grade AC joint dislocation treated with anatomic CC fixation using double clavicular tunnels and three flip-buttons. METHODS: A retrospective, unicentric study was performed. The study included patients with high-grade AC joint dislocation who underwent surgery with anatomic CC fixation using double clavicular tunnels and three flip-buttons. Demographic data were obtained from medical records. A functional evaluation using subjective shoulder value (SSV), visual analog scale (VAS), and disabilities of the arm, shoulder, and hand (DASH) questionnaires was performed, and an evaluation of preoperative and postoperative comparative Zanca view images was performed. Factors associated with functional outcomes and radiological AC reduction were analyzed. RESULTS: A total of 83 patients completed follow-up and were included in the analysis. The mean SSV, VAS, and DASH scores were 92.8, 0.8, and 6.4, respectively. Patients who had complications experienced significantly worse functional outcomes (DASH: P=0.037). Suboptimal final AC reduction was observed in nine patients (11.1%), and significantly more frequently in patients older than 40 years (P=0.031) and in surgeries performed more than 7 days after injury (P=0.034). There were two reoperations (2.4%). CONCLUSIONS: Anatomic CC fixation with a double clavicular tunnel and three flip-buttons leads to good functional outcomes, low complication rates, and high rates of optimal AC reduction. Level of Evidence: Level IV; Case series.
RESUMEN
Anthropogenic activities are increasing the atmospheric carbon dioxide (CO2); around a third of the CO2 emitted by these activities has been taken up by the ocean. Nevertheless, this marine ecosystem service of regulation remains largely invisible to society, and not enough is known about regional differences and trends in sea-air CO2 fluxes (FCO2), especially in the Southern Hemisphere. The objectives of this work were as follows: first to put values of FCO2 integrated over the exclusive economic zones (EEZ) of five Latin-American countries (Argentina, Brazil, Mexico, Peru, and Venezuela) into perspective regarding total country-level greenhouse gases (GHG) emissions. Second, to assess the variability of two main biological factors affecting FCO2 at marine ecological time series (METS) in these areas. FCO2 over the EEZs were estimated using the NEMO model, and GHG emissions were taken from reports to the UN Framework Convention on Climate Change. For each METS, the variability in phytoplankton biomass (indexed by chlorophyll-a concentration, Chla) and abundance of different cell sizes (phy-size) were analyzed at two time periods (2000-2015 and 2007-2015). Estimates of FCO2 at the analyzed EEZs showed high variability among each other and non-negligible values in the context of greenhouse gas emissions. The trends observed at the METS indicated, in some cases, an increase in Chla (e.g., EPEA-Argentina) and a decrease in others (e.g., IMARPE-Peru). Evidence of increasing populations of small size-phytoplankton was observed (e.g., EPEA-Argentina, Ensenada-Mexico), which would affect the carbon export to the deep ocean. These results highlight the relevance of ocean health and its ecosystem service of regulation when discussing carbon net emissions and budgets.
Asunto(s)
Ecosistema , Gases de Efecto Invernadero , Dióxido de Carbono/análisis , América Latina , Cambio Climático , Monitoreo del Ambiente/métodos , Gases de Efecto Invernadero/análisis , Metano/análisisRESUMEN
Suppose A = { a 1 , , a n + 2 } â Z n has cardinality n + 2 , with all the coordinates of the a j having absolute value at most d, and the a j do not all lie in the same affine hyperplane. Suppose F = ( f 1 , , f n ) is an n × n polynomial system with generic integer coefficients at most H in absolute value, and A the union of the sets of exponent vectors of the f i . We give the first algorithm that, for any fixed n, counts exactly the number of real roots of F in time polynomial in log ( d H ) . We also discuss a number-theoretic hypothesis that would imply a further speed-up to time polynomial in n as well.