Reconstruction of the Permittivity of Ex Vivo Animal Tissues in the Frequency Range 1-20 GHz Using a Water-Based Dielectric Model.

Several medical techniques are based on the application of electromagnetic fields (EMFs) on the human body with therapeutic and/or diagnostic aims. The response of human tissues to the applied EMF is mediated by the tissues' dielectric properties, which must therefore be characterized at the frequencies of the considered technique. Due to the heterogeneity and complexity of biological tissues, it is necessary to know their properties in vivo for the specific condition of interest. Traditional techniques for the dielectric characterization of biological tissues are invasive and, as such, not adoptable for this aim. Accordingly, alternative sensors and/or sensing methods are needed. Recently, a new wideband spectroscopy technique was proposed, based on quantities derived from the Magnetic Resonance (MRI) signal. Among these quantities, the water content was proposed to evaluate the dielectric properties at frequencies around a few GHz. This work verifies the possibility of deriving tissues' dielectric properties in the frequency range of 1-20 GHz based on knowledge of the water content. The water content was retrieved through a dehydration procedure for five different ex vivo tissues. The achieved results were compared with references from the literature.

Fused Filament Fabrication of Polyethylene/Graphene Composites for In-Space Manufacturing.

Graphene-based composite materials are highly sought after for space applications due to their ability to encompass various properties, such as electrical conductivity, thermal resistance, and radiation shielding. This versatility allows for the creation of multifunctional components that can serve various purposes in space. Three-dimensional (3D) printing of composite materials in space offers a versatile and efficient means of manufacturing components, tools, and structures that are tailored to the unique challenges and requirements of space missions. In this work, we aim to develop 3D-printed composites made of medium-density polyethylene (MDPE) matrix and exfoliated graphene nanoplatelets (xGnP) as filler, using fused filament fabrication (FFF). Our research focuses on the challenges associated with the FFF process for fabricating MDPE/xGnP materials, particularly by optimizing filament extrusion and assessing the resulting material properties and space environmental compatibility. Firstly, we optimize the extrusion process, and use the MDPE/xGnP filaments to fabricate 3D-printed samples after defining the FFF parameters. We employ differential scanning calorimetry (DSC) to assess the melting properties and crystallization degree of the extruded filaments and 3D-printed samples, providing insights into the relationship between these properties and the characteristics of the initial powders. Electrical and tensile tests are carried out to evaluate the material properties after successfully mitigating challenges, such as warping and inadequate adhesion, to build plates during the printing process. Finally, we subject the 3D-printed composites to outgassing tests under exposure to the AM0 solar spectrum to evaluate their space environmental suitability. The results of this work demonstrate the capability of the FFF-based process to efficiently manufacture components made of MDPE/xGnP composites, providing optimized parameters for their potential in-space fabrication.

Recent Advances and Challenges in Polymer-Based Materials for Space Radiation Shielding.

Space exploration requires the use of suitable materials to protect astronauts and structures from the hazardous effects of radiation, in particular, ionizing radiation, which is ubiquitous in the hostile space environment. In this scenario, polymer-based materials and composites play a crucial role in achieving effective radiation shielding while providing low-weight and tailored mechanical properties to spacecraft components. This work provides an overview of the latest developments and challenges in polymer-based materials designed for radiation-shielding applications in space. Recent advances in terms of both experimental and numerical studies are discussed. Different approaches to enhancing the radiation-shielding performance are reported, such as integrating various types of nanofillers within polymer matrices and optimizing the materials design. Furthermore, this review explores the challenges in developing multifunctional materials that are able to provide radiation protection. By summarizing the state-of-the-art research and identifying emerging trends, this review aims to contribute to the ongoing efforts to identify polymer materials and composites that are most useful to protect human health and spacecraft performance in the harsh radiation conditions that are typically found during missions in space.

Fabrication of Alginate/Ozoile Gel Microspheres by Electrospray Process.

Natural polymers, such as alginate and chitosan, are widely exploited for drug delivery applications due to their biocompatibility, low toxicity, and sustainable sourcing. In this study, pH-responsive gel microspheres were fabricated from an alginate/Ozoile emulsion. Ozoile (Stable Ozonides) is a biological inducer, derived from olive oil, which stimulates the endogenous defense system by promoting the repair of tissue damage and restoration of proper physiology through the regulation of gene transcription. Here, the versatile and cost-effective electrospray technique without the use of organic solvents was used to fabricate alginate/Ozoile microspheres with high throughput. The process parameters (voltage, flow rate, and needle gauge) were optimized to obtain microspheres with good sphericity factor and tailored diameter (250-700 µm). The microspheres were additionally optimized through a chitosan coating to enhance their stability and regulate the gel matrix's degradation process. Morphological analysis, FTIR spectroscopy, and degradation tests confirmed the structural integrity and pH-responsive behavior of the gel microspheres. This research offers a promising route for targeted drug delivery systems, particularly in applications related to the modulation of oxidative stress and management of inflammation.

Colorimetric Sensors Based on Poly(acrylic Acid)/TiO2 Nanocomposite Hydrogels for Monitoring UV Radiation Exposure.

In recent years, there has been an open debate on proper sun exposure to reduce the risk of developing skin cancer. The mainly encountered issue is that general guidelines for UV radiation exposure could not be effective for all skin types. The implementation of customized guidelines requires a method by which to measure the UV dose as a result of daily exposure to sunlight, ideally with an inexpensive, easy-to-read sensor. In this work, we present the characterization of nanocomposite hydrogel materials acting as colorimetric sensors upon exposure to UV light. The sensor was prepared using a poly(acrylic acid) (PAA) hydrogel matrix in which TiO2 nanoparticles and methylene blue (MB) were integrated. Raman mapping was used to determine the network structure of the hydrogel and its water distribution. The TiO2 nanoparticles dispersed in the PAA matrix maintain their photoactivity and catalyze a reaction by which methylene blue is converted into leuko-methylene. The conversion causes a discoloration effect that is visible to the naked eye and can therefore be used as an indicator of UV radiation exposure. Moreover, it was possible to tune the discoloration rate to the limit exposure of each skin type, simply by changing the ratio of titanium dioxide to dye. We obtained a response time ranging from 30 min to 1.5 h. Future work will be dedicated to the possibility of scaling up this range and to improve the sensor wearability; however, our study paves the way to the realisation of sensors suitable for public use, which could help us find a solution to the challenge of balancing sufficient UV exposure to prevent Vitamin D deficiency with excessive UV exposure that could ultimately cause skin cancer.

A Comprehensive Review on the Thermal Stability Assessment of Polymers and Composites for Aeronautics and Space Applications.

This review article provides an exhaustive survey on experimental investigations regarding the thermal stability assessment of polymers and polymer-based composites intended for applications in the aeronautical and space fields. This review aims to: (1) come up with a systematic and critical overview of the state-of-the-art knowledge and research on the thermal stability of various polymers and composites, such as polyimides, epoxy composites, and carbon-filled composites; (2) identify the key factors, mechanisms, methods, and challenges that affect the thermal stability of polymers and composites, such as the temperature, radiation, oxygen, and degradation; (3) highlight the current and potential applications, benefits, limitations, and opportunities of polymers and composites with high thermal stability, such as thermal control, structural reinforcement, protection, and energy conversion; (4) give a glimpse of future research directions by providing indications for improving the thermal stability of polymers and composites, such as novel materials, hybrid composites, smart materials, and advanced processing methods. In this context, thermal analysis plays a crucial role in the development of polyimide-based materials for the radiation shielding of space solar cells or spacecraft components. The main strategies that have been explored to improve the processability, optical transparency, and radiation resistance of polyimide-based materials without compromising their thermal stability are highlighted. The combination of different types of polyimides, such as linear and hyperbranched, as well as the incorporation of bulky pendant groups, are reported as routes for improving the mechanical behavior and optical transparency while retaining the thermal stability and radiation shielding properties. Furthermore, the thermal stability of polymer/carbon nanocomposites is discussed with particular reference to the role of the filler in radiation monitoring systems and electromagnetic interference shielding in the space environment. Finally, the thermal stability of epoxy-based composites and how it is influenced by the type and content of epoxy resin, curing agent, degree of cross-linking, and the addition of fillers or modifiers are critically reviewed. Some studies have reported that incorporating mesoporous silica micro-filler or microencapsulated phase change materials (MPCM) into epoxy resin can enhance its thermal stability and mechanical properties. The mesoporous silica composite exhibited the highest glass transition temperature and activation energy for thermal degradation among all the epoxy-silica nano/micro-composites. Indeed, an average activation energy value of 148.86 kJ/mol was recorded for the thermal degradation of unfilled epoxy resin. The maximum activation energy range was instead recorded for composites loaded with mesoporous microsilica. The EMC-5p50 sample showed the highest mean value of 217.6 kJ/mol. This remarkable enhancement was ascribed to the polymer invading the silica pores and forging formidable interfacial bonds.

Synthesis and Characterization of Alginate Gel Beads with Embedded Zeolite Structures as Carriers of Hydrophobic Curcumin.

Alginate-based beads containing a porous zeolite filler were developed as carriers of bioactive compounds with a hydrophobic nature, such as curcumin (Cur). Curcumin, a natural pigment extracted from the turmeric (Curcuma longa) plant, exhibits antioxidant, anti-inflammatory, anticarcinogenic, and antiviral properties. To enhance the bioavailability of the drug, curcumin needs to be encapsulated in a suitable carrier that improves its dispersibility and solubility. Commercial A-type zeolites (Z5A) were used as curcumin-binding agents and they were immobilized within the alginate gel beads by cross-linking in calcium chloride solution during an extrusion dripping process. The process parameters (alginate and CaCl2 concentrations, needle gauge, collecting distance) were optimized to fabricate beads with good sphericity factor and 1.5-1.7 mm diameter in their hydrated state. The chemical structure of the gel beads was assessed using FTIR spectroscopy, while their thermal stability was evaluated through differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Due to the alginate matrix, the composite Alg/ZA5-Cur beads possess pH-responsive properties. In addition, the gel beads were modified by chitosan (CS) to enhance the stability and control the degradation behavior of the gel matrix. The swelling behavior and the degradation of the beads were analyzed in physiological solutions with different pH values. Results demonstrate the stabilizing and protective effect of the chitosan coating, as well as the reinforcing effect of the zeolite filler. This makes the pH-responsive alginate gel beads good candidates for the delivery of lipophilic drugs to specific inflammatory sites.

Impact of Proton Irradiation on Medium Density Polyethylene/Carbon Nanocomposites for Space Shielding Applications.

The development of novel materials with improved radiation shielding capability is a fundamental step towards the optimization of passive radiation countermeasures. Polyethylene (PE) nanocomposites filled with carbon nanotubes (CNT) or graphene nanoplatelets (GNP) can be a good compromise for maintaining the radiation shielding properties of the hydrogen-rich polymer while endowing the material with multifunctional properties. In this work, nanocomposite materials based on medium-density polyethylene (MDPE) loaded with different amounts of multi-walled carbon nanotubes (MWCNT), GNPs, and hybrid MWCNT/GNP nanofillers were fabricated, and their properties were examined before and after proton exposure. The effects of irradiation were evaluated in terms of modifications in the chemical and physical structure, wettability, and surface morphology of the nanocomposites. The aim of this work was to define and compare the MDPE-based nanocomposite behavior under proton irradiation in order to establish the best system for applications as space shielding materials.

Hybrid Carbon Nanocomposites Made of Aerospace-Grade Epoxy Showing Synergistic Effects in Electrical Properties and High Processability.

In this work, we investigate the processability and the volumetric electrical properties of nanocomposites made of aerospace-grade RTM6, loaded with different carbon nanoparticles. Nanocomposites with graphene nanoplatelets (GNP), single-walled carbon nanotubes (SWCNT) and hybrid GNP/SWCNT in the ratio 2:8 (GNP2SWCNT8), 5:5 (GNP5SWCNT5) and 8:2 (GNP8SWCNT2) were manufactured and analyzed. The hybrid nanofillers are observed to have synergistic properties as epoxy/hybrid mixtures showed better processability than epoxy/SWCNT, while maintaining high values of electrical conductivity. On the other hand, epoxy/SWCNT nanocomposites present the highest electrical conductivities with the formation of a percolating conductive network at lower filler content, but very large viscosity values and filler dispersion issues, which significantly affect the final quality of the samples. Hybrid nanofiller allows us to overcome the manufacturing issues typically associated with the use of SWCNTs. The combination of low viscosity and high electrical conductivity makes the hybrid nanofiller a good candidate for the fabrication of aerospace-grade nanocomposites with multifunctional properties.

Conductive and Thermo-Responsive Composite Hydrogels with Poly(N-isopropylacrylamide) and Carbon Nanotubes Fabricated by Two-Step Photopolymerization.

Biocompatible and conductive polymer hydrogels are the subject of intensive research in the bioengineering field because of their use in bioelectronic devices and for the fabrication of electro-responsive tissues and drug delivery systems. In this study, we report the synthesis of conductive composite hydrogels consisting of a poly(N-isopropylacrylamide) (PNIPAM) matrix embedding carboxyl-functionalized multi-walled carbon nanotubes (MWCNT-COOH) using a two-step photopolymerization method. Thermo-responsive hydrogels with controlled hydrophilicity and conductivity were prepared by varying the carbon nanotube concentration in the range 0.5-3 wt%. The thermal response of the PNIPAM-based composite hydrogels was measured by differential scanning calorimetry with both ultrapure water and PBS solution as swelling liquid. Results show that the endothermic peak associated with the temperature-induced volume phase transition (VPT) shifts to higher temperatures upon increasing the concentration of the nanotubes, indicating that more energy is required to dissociate the hydrogen bonds of the polymer/filler network. In PBS solution, the swelling ratios and the VPT temperatures of the composite hydrogels are reduced because of salt-induced screening of the oppositely charged polymer/filler assembly, and the electrical resistivity decreases by a factor of 10 with respect to the water-swollen hydrogels.

RIFT Process Analysis for the Production of Green Composites in Flax Fibers and Bio-Based Epoxy Resin.

In this work, a dual objective is carried out on composite materials in flax fiber and bio-based epoxy resin: to determine the process parameters and to develop a numerical model for highlighting the potential of and the limits in the production of "green" laminates through a RIFT process (Resin Infusion under Flexible Tool). For these reasons, compressibility tests were performed in order to evaluate the behavior of commercial flax woven under the vacuum bag. Subsequently, permeability tests were performed in order to evaluate the permeability curves necessary for the numerical study of the infusion process. For the numerical analyses, the commercial software PAM-RTM was adopted and validated. In this work, vaseline oil was used as the injected resin for the validation, and a bio-based epoxy commercial system was used for the study of the infusion process in a simple case study. The results were compared with a petroleum-based epoxy system typically used for infusion processes, showing the potentiality and the critical use of bio-based resins for infusion processes.

Recent Trends in Graphene/Polymer Nanocomposites for Sensing Devices: Synthesis and Applications in Environmental and Human Health Monitoring.

Graphene-based nanocomposites are largely explored for the development of sensing devices due to the excellent electrical and mechanical properties of graphene. These properties, in addition to its large specific surface area, make graphene attractive for a wide range of chemical functionalization and immobilization of (bio)molecules. Several techniques based on both top-down and bottom-up approaches are available for the fabrication of graphene fillers in pristine and functionalized forms. These fillers can be further modified to enhance their integration with polymeric matrices and substrates and to tailor the sensing efficiency of the overall nanocomposite material. In this review article, we summarize recent trends in the design and fabrication of graphene/polymer nanocomposites (GPNs) with sensing properties that can be successfully applied in environmental and human health monitoring. Functional GPNs with sensing ability towards gas molecules, humidity, and ultraviolet radiation can be generated using graphene nanosheets decorated with metallic or metal oxide nanoparticles. These nanocomposites were shown to be effective in the detection of ammonia, benzene/toluene gases, and water vapor in the environment. In addition, biological analytes with broad implications for human health, such as nucleic bases or viral genes, can also be detected using sensitive, graphene-based polymer nanocomposites. Here, the role of the biomolecules that are immobilized on the graphene nanomaterial as target for sensing is reviewed.

Flexible Nanocomposites Based on Polydimethylsiloxane Matrices with DNA-Modified Graphene Filler: Curing Behavior by Differential Scanning Calorimetry.

Novel silicone-based nanocomposites with varied elastic properties were prepared by blending standard polydimethylsiloxane (PDMS) with a lower viscosity component (hydroxyl-terminated PDMS) and integrating a graphene nanoplatelets (GNP) filler modified by strands of deoxyribonucleic acid (DNA). The curing behavior of these nanocomposites was studied by dynamic and isothermal differential scanning calorimetry. The activation energies of the polymerization reactions were determined using the Kissinger method and two model-free isoconversional approaches, the Ozawa-Flynn-Wall and the Kissinger-Akahira-Sunose methods. Results show that the complex trend of the curing behavior can be described using the isoconversional methods, unveiling lower activation energies for the nanocomposites with standard PDMS matrices. The role of the DNA modification of graphene on the curing behavior is also demonstrated. The curing reactions of the nanocomposites with the PDMS matrix are favored by the presence of the GNP-DNA filler. PDMS/PDMS-OH blends generate softer nanocomposites with hardness and reduced elastic modulus that can be tuned by varying the amount of the filler.