Physicochemical characteristics of airborne microplastics of a typical coastal city in the Yangtze River Delta Region, China.

Airborne microplastics (MPs) are important pollutants that have been present in the environment for many years and are characterized by their universality, persistence, and potential toxicity. This study investigated the effects of terrestrial and marine transport of MPs in the atmosphere of a coastal city and compared the difference between daytime and nighttime. Laser direct infrared imaging (LDIR) and polarized light microscopy were used to characterize the physical and chemical properties of MPs, including number concentration, chemical types, shape, and size. Backward trajectories were used to distinguish the air masses from marine and terrestrial transport. Twenty chemical types were detected by LDIR, with rubber (16.7%) and phenol-formaldehyde resin (PFR; 14.8%) being major components. Three main morphological types of MPs were identified, and fragments (78.1%) are the dominant type. MPs in the atmosphere were concentrated in the small particle size segment (20-50 µm). The concentration of MPs in the air mass from marine transport was 14.7 items/m3 - lower than that from terrestrial transport (32.0 items/m3). The number concentration of airborne MPs was negatively correlated with relative humidity. MPs from terrestrial transport were mainly rubber (20.2%), while those from marine transport were mainly PFR (18%). MPs in the marine transport air mass were more aged and had a lower number concentration than those in the terrestrial transport air mass. The number concentration of airborne MPs is higher during the day than at night. These findings could contribute to the development of targeted control measures and methods to reduce MP pollution.

Hemolytic Properties of Fine Particulate Matter (PM2.5) in In Vitro Systems.

Epidemiological studies have suggested that inhalation exposure to particulate matter (PM) air pollution, especially fine particles (i.e., PM2.5 (PM with an aerodynamic diameter of 2.5 microns or less)), is causally associated with cardiovascular health risks. To explore the toxicological mechanisms behind the observed adverse health effects, the hemolytic activity of PM2.5 samples collected during different pollution levels in Beijing was evaluated. The results demonstrated that the hemolysis of PM2.5 ranged from 1.98% to 7.75% and demonstrated a clear dose-response relationship. The exposure toxicity index (TI) is proposed to represent the toxicity potential of PM2.5, which is calculated by the hemolysis percentage of erythrocytes (red blood cells, RBC) multiplied by the mass concentration of PM2.5. In a pollution episode, as the mass concentration increases, TI first increases and then decreases, that is, TI (low pollution levels) < TI (heavy pollution levels) < TI (medium pollution levels). In order to verify the feasibility of the hemolysis method for PM toxicity detection, the hemolytic properties of PM2.5 were compared with the plasmid scission assay (PSA). The hemolysis results had a significant positive correlation with the DNA damage percentages, indicating that the hemolysis assay is feasible for the detection of PM2.5 toxicity, thus providing more corroborating information regarding the risk to human cardiovascular health.

Atmospheric microplastic deposition associated with GDP and population growth: Insights from megacities in northern China.

Microplastic (MP) pollution is evolving into one of the most pressing environmental concerns worldwide. This study assessed the impact of economic activities on atmospheric MP pollution across 17 megacities in northern China, analyzing the correlation between the deposition flux of atmospheric MPs and variables such as city population, gross domestic product (GDP), and industrial structure. The results have shown that the MP pollution is obviously impacted by human activities related to increased GDP, population, as well as tertiary service sector, in which the MP pollution shows most close relationship with the GDP growth. Polypropylene, polyamide, polyurethane, and polyethylene were identified as the primary components of atmospheric MPs. The average particle size of MPs in atmospheric dustfall is 78.3 µm, and the frequency of MP particles increases as the particle size decreases. The findings highlight the complex relationship between socio-economic development and atmospheric MP accumulation, providing essential insights for the formulation of targeted emission reduction strategies.

The terrestrial end-Permian mass extinction in the paleotropics postdates the marine extinction.

The end-Permian mass extinction was the most severe ecological event during the Phanerozoic and has long been presumed contemporaneous across terrestrial and marine realms with global environmental deterioration triggered by the Siberian Traps Large Igneous Province. We present high-precision zircon U-Pb geochronology by the chemical abrasion-isotope dilution-thermal ionization mass spectrometry technique on tuffs from terrestrial to transitional coastal settings in Southwest China, which reveals a protracted collapse of the Cathaysian rainforest beginning after the onset of the end-Permian marine extinction. Integrated with high-resolution geochronology from coeval successions, our results suggest that the terrestrial extinction occurred diachronously with latitude, beginning at high latitudes during the late Changhsingian and progressing to the tropics by the early Induan, spanning a duration of nearly 1 million years. This latitudinal age gradient may have been related to variations in surface warming with more degraded environmental conditions at higher latitudes contributing to higher extinction rates.

Comparative study on physicochemical characteristics of atmospheric microplastics in winter in inland and coastal megacities: A case of Beijing and Shanghai, China.

Atmospheric microplastics (MPs) have received global attention across various sectors of society due to their potential negative impacts. This study aims to understand the physicochemical characteristics of MPs in inland and coastal megacities for raising awareness about the urgent need to reduce plastic pollution. Laser Direct Infrared Imaging (LDIR) and Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray Spectroscopy (EDX) techniques were employed to characterize atmospheric MPs in megacities (inland megacity Beijing and coastal megacity Shanghai) in China, focusing on their physicochemical characteristics, including compositional types, number concentration, morphology, size, possible sources, and potential health risks. The LDIR analysis identified sixteen different types of MPs present in the atmospheres of Beijing and Shanghai. The number concentration of atmospheric MPs in Beijing (3.0 items/m3) is 1.8 times that of Shanghai (1.7 items/m3). The study found that the variations in MP pollution between Beijing and Shanghai are influenced by the urban industrial structure and geographical location. Morphological analysis indicates that fragment MPs have the highest relative abundance in Beijing, while fibrous MPs dominate the atmosphere of Shanghai. Additionally, the study assessed the potential health risks of atmospheric MPs to urban residents. The results suggest that residents of Beijing face more severe health risks from atmospheric MPs compared to those in Shanghai. These findings underscore the urgency to address the issue of atmospheric MPs and provide crucial evidence for the formulation of relevant environmental and health policies.

Geochemical Characteristics of the Middle Jurassic Coal-Bearing Mudstones in the Dameigou Area (Qaidam Basin, NW China): Implications for Paleoclimate, Paleoenvironment, and Organic Matter Accumulation.

The Qaidam Basin is a prominent oil and gas exploration and production base of NW China's Jurassic coal-bearing strata. Coal-bearing mudstones are important source rocks for unconventional reservoirs and can record valuable paleoenvironment and paleoclimate information. Here, geochemical analysis including total organic carbon (TOC), total sulfur, organic carbon isotopic composition, rock pyrolysis, X-ray diffraction, and major and trace elements were carried out on mudstone samples from the Middle Jurassic coal-bearing strata of the Dameigou section in the Qaidam Basin to reveal the paleoclimatic and paleoenvironmental conditions during the deposition of the strata and their controls on organic matter accumulation. Results show that the Middle Jurassic Dameigou and Shimengou formations include three significant stages based on their average TOC values of (3.32%, Stage I; 0.87%, Stage II; and 4.42%, Stage III) from the bottom to the top. The organic matter in mudstones in Stages I and II are mainly derived from terrestrial higher plants, while the organic matter has mixed sources of higher plant debris and lower aquatic organisms in Stage III. Paleoclimate parameters indicate that the mudstones in Stage I were deposited under humid and warm conditions, while the climate in Stage II changed to semiarid and warm conditions before turning dry and hot in Stage III. The varying paleoenvironmental characteristics under different paleoclimatic conditions have also been reconstructed. Our results suggest that the accumulation of organic matter in Stages I and II was primarily controlled by redox conditions, while paleoproductivity is the major controlling factor for organic matter accumulation in Stage III.

Changes of water-soluble inorganic sulfate and nitrate during severe dust storm episodes in a coastal city of North China.

Dust storms are one of the largest sources of non-exhaust emissions in China, which can adversely affect air quality and human health during long-distance transportation. To study the influence of dust storms on aerosol particle composition, samples of fine aerosol (PM2.5) were collected before, during, and after the severe dust storm episodes in a coastal city of North China. Then the water-soluble inorganic ions in the filters were analyzed. The results showed that the chemical composition varied significantly in different sampling periods. Before the dust storm periods (Phase 1), the weather was characterized by high relative humidity. NO3- was the main water-soluble inorganic ion, accounting for about 1/3 of the total mass of PM2.5, which is very different from the situation a few years ago when sulfate was the dominant. The results indicated that the chemical composition of the atmosphere in China has changed significantly after the implementation of strict air pollution control measures. During the severe dust storm periods (within a few hours after the dust invasion, Phase 2), the proportion of Ca2+ in PM2.5 was high; the sulfate formation was limited due to adiabatic air mass affected by the cold front, and the sulfate content might be mainly from desert soil. However, a small amount of nitrate can be formed during their long-distance transportation. After the dust storm periods (Phase 3), dust plums and local polluted air mass mixed well. The proportion of secondary inorganic ions increased, and nitrate formation was still the main. The changes in the chemical composition from a few years ago during Phase 1 and the sharp changes in different water-soluble inorganic ions during different Phases should be carefully considered to evaluate their implications for air quality and human health.

Computer-controlled scanning electron microscope: Methodologies and application scenarios in atmospheric particle research.

Understanding the physicochemical properties of atmospheric particles and the refined source apportionment become a vital foundation for targeted control of air pollution. The rapid development of the computer-controlled scanning electron microscope (CCSEM) provides a new era for atmospheric particle research by improving the efficiency of individual particle analysis. This study summarized the methodologies for CCSEM-based individual particle analysis and introduced the principle, characteristics, and development of CCSEM. The application scenarios of CCSEM in the field of air quality assessment, health assessment, and climate effects of atmospheric particles were reviewed. CCSEM has a great application prospect in the refined particle source apportionment, health effect assessment, and particle source spectrum database establishment. Much attention should be paid to the establishment of a well-developed methodology system for CCSEM, including particle identification, classification method and standardization, quantitative source appointment method establishment, and analysis timeliness enhancement.

Coalbed Methane Enrichment Characteristics and Exploration Target Selection in the Zhuozishan Coalfield of the Western Ordos Basin, China.

The Zhuozishan coalfield at the western margin of the Ordos Basin is one of the main coal-mining areas in China, and recent explorations have revealed the great potential for coalbed methane (CBM) resources in its Carboniferous and Permian strata. In this paper, the controlling factors of CBM enrichment of the major coals are studied in this coalfield and the CBM resources are estimated based on the analysis of the coal petrology and compilation of literature data on the gas content. The result of the coal petrology analysis of 10 samples shows that the vitrinite content of No. 16 coal (71.9-77.3%) is higher than that of No. 9 coal (59.1-65.1%), and the inertinite content of No. 16 coal (18.9-23.5%) is lower than that of No. 9 coal (30.1-34.9%). The R o,max value of No. 16 coal (1.18-1.35%) is higher than that of No. 9 coal (1.04-1.13%), and both coals are of medium rank. Due to greater thickness, deeper burial depth, and better coal petrology characteristics, the No. 16 coal seam of the Taiyuan Formation is selected as the major coal seam for CBM resource estimation, which has a thickness of 1-6 m and a present-day burial depth of 200-1100 m. The gas content of this coal seam varies mostly between 4 and 10 m3/t. Positive correlation between the coal seam thickness as well as present-day burial depth and the gas content suggests that the thick and deeply buried coal seams are favorable for CBM preservation. The ash yield shows an insignificant negative correlation with the gas content, indicating that ash yield is not an important factor for CBM enrichment. The syncline hinges located below the thrust zones show higher gas content due to greater burial depths. In contrast, the anticline hinges at shallower depths tend to have lower gas contents. Based on the combined information about sedimentary environments, structural patterns, and hydrogeology, two CBM accumulation models are put forward in the study area that include syncline-hydraulic plugging below thrust nappe and fault-confined aquifer plugging. The volumetric method is used to estimate the CBM resources, and results indicate that the CBM resource in the whole coalfield is 428.78 × 108 m3, and the total resource abundance is 0.74 × 108 m3/km2. Two favorable areas for the CBM exploration are optimized based on the resource amount and resource abundance. One of the favorable areas is the Kabuqi area in the northern part of the coalfield, and another is the Baiyunwusu area in the central part of the coalfield. These two areas will be the CBM priority exploration areas at the western margin of the Ordos Basin.

Correlating Coal Petrology and Methane Adsorption Parameters of High-Volatile Bituminous Coals with P-Wave Velocity.

The parameters of coal petrology and methane adsorption are significant to exploit coal and coalbed methane (CBM). Based on borehole core sampling, a new method using the P-wave velocity to predict coal maceral, coal face index, and Langmuir parameter of high-volatile bituminous coals was proposed. The results showed that the P-wave velocity correlated positively with coal skeletal density, apparent density, and ash yield with fitting coefficients (R 2) of 0.55, 0.57, and 0.57, respectively, but it negatively correlated with coal porosity and moisture content with R 2 of 0.56 and 0.60, respectively. Vitrinite, ranging from 14.8 to 82.7% with an average of 53.8%, positively correlated with coal porosity due to more micropores in vitrinite and thus negatively correlated with the density and P-wave velocity. Inertinite content was in the range of 5.4 to 27.4% with an average of 11.0%, which correlated negatively with the coal porosity and thus positively with the density and P-wave velocity for most of the samples. Furthermore, the P-wave velocity was weakly positively correlated with mineral content, and a negative correlation was found between the P-wave velocity and vitrinite/inertinite ratio (V/I), gelification index (GI), and Langmuir volume (V L). The porosity (Y 1), vitrinite content (Y 2), inertinite content (Y 3), and V L (Y 4) of coals could be predicted based on the equations as follows: Y 1 = 7842.4 e-0.003X , Y 2 = -0.0003X 2 + 1.0731X - 924.09, Y 3 = 0.0003X 2 - 1.2797X + 1405, and Y 4 = -0.04X + 101.24, where X is the P-wave velocity. Generally, P-wave velocity could be largely used to predict the variations of the coal maceral and methane adsorption capacity of high-volatile bituminous coals, providing a new and valuable approach for CBM exploration and gas prevention in coal mines.

Microplastic atmospheric dustfall pollution in urban environment: Evidence from the types, distribution, and probable sources in Beijing, China.

Airborne microplastics (MPs) pollution is an environmental problem of increasing concern, due to the ubiquity, persistence and potential toxicity of plastics in the atmosphere. In recent years, most studies on MPs have focused on aquatic and sedimentary environments, but little research has been done on MPs in the urban atmosphere. In this study, a total of ten dustfall samples were collected in a transect from north to south across urban Beijing. The compositions, morphologies, and sizes of the MPs in these dustfall samples were determined by means of Laser Direct Infrared (LDIR) imaging and Field Emission Scanning Electron Microscopy (FESEM). The number concentrations of MPs in the Beijing dustfall samples show an average of 123.6 items/g. The MPs concentrations show different patterns in the central, southern, and northern zones of Beijing. The number concentration of MPs was the highest in the central zone (224.76 items/g), as compared with the southern zone (170.55 items/g), and the northern zone (24.42 items/g). The LDIR analysis revealed nine compositional types of MPs, including Polypropylene (PP), Polyamide (PA), Polystyrene (PS), Polyethylene (PE), Polyethylene Terephthalate (PET), Silicone, Polycarbonate (PC), Polyurethane (PU) and Polyvinylchloride (PVC), among which PP was overall dominant. The PP dominates the MPs in the central zone (76.3%), and the PA dominates the MPs in the southern zone (55.86%), while the northern zone had a diverse combination of MPs types. The morphological types of the individual MPs particle include fragments, pellets, and fibers, among which fragments are dominant (70.9%). FESEM images show the presence of aged MPs in the Beijing atmosphere, which could pose a yet unquantified health risk to Beijing's residents. The average size of the MPs in the Beijing samples is 66.62 µm. Our study revealed that the numbers of fibrous MPs increase with the decrease in size. This pollution therefore needs to be carefully monitored, and methods of decreasing the sources and mitigations developed.

Oxidative potential and water-soluble heavy metals of size-segregated airborne particles in haze and non-haze episodes: Impact of the "Comprehensive Action Plan" in China.

Air pollution is a major environmental health challenge in megacities, and as such a Comprehensive Action Plan (CAP) was issued in 2017 for Beijing, the capital city of China. Here we investigated the size-segregated airborne particles collected after the implementation of the CAP, intending to understand the change of oxidative potential and water-soluble heavy metal (WSHM) levels in 'haze' and 'non-haze' days. The DNA damage and the levels of WSHM were analyzed by Plasmid Scission Assay (PSA) and High-Resolution Inductively Coupled Plasma Mass Spectrometry (HR-ICP-MS) techniques. The PM mass concentration was higher in the fine particle size (0.43-2.1 µm) during haze days, except for the samples affected by mineral dust. The particle-induced DNA damage caused by fine sized particles (0.43-2.1 µm) exceeded that caused by the coarse sized particles (4.7-10 µm). The DNA damage from haze day particles significantly exceeded those collected on non-haze days. Prior to the instigation of the CAP, the highest value of DNA damage decreased, and DNA damage was seen in the finer size (0.43-1.1 µm). The Pearson correlation coefficient between the concentrations of water-soluble Pb, Cr, Cd and Zn were positively correlated with DNA damage, suggesting that these WSHM had significant oxidative potential. The mass concentrations of water-soluble trace elements (WSTE) and individual heavy metals were enriched in the finer particles between 0.43 µm to 1.1 µm, implying that smaller sized particles posed higher health risks. In contrast, the significant reduction in the mass concentration of water-soluble Cd and Zn, and the decrease of the maximum and average values of DNA damage after the CAP, demonstrated its effectiveness in restricting coal-burning emissions. These results have demonstrated that the Beijing CAP policy has been successful in reducing the toxicity of 'respirable' ambient particles.

COVID-19 mortality and exposure to airborne PM2.5: A lag time correlation.

COVID-19 has escalated into one of the most serious crises in the 21st Century. Given the rapid spread of SARS-CoV-2 and its high mortality rate, here we investigate the impact and relationship of airborne PM2.5 to COVID-19 mortality. Previous studies have indicated that PM2.5 has a positive relationship with the spread of COVID-19. To gain insights into the delayed effect of PM2.5 concentration (µgm-3) on mortality, we focused on the role of PM2.5 in Wuhan City in China and COVID-19 during the period December 27, 2019 to April 7, 2020. We also considered the possible impact of various meteorological factors such as temperature, precipitation, wind speed, atmospheric pressure and precipitation on pollutant levels. The results from the Pearson's correlation coefficient analyses reveal that the population exposed to higher levels of PM2.5 pollution are susceptible to COVID-19 mortality with a lag time of >18 days. By establishing a generalized additive model, the delayed effect of PM2.5 on the death toll of COVID-19 was verified. A negative correction was identified between temperature and number of COVID-19 deaths, whereas atmospheric pressure exhibits a positive correlation with deaths, both with a significant lag effect. The results from our study suggest that these epidemiological relationships may contribute to the understanding of the COVID-19 pandemic and provide insights for public health strategies.

Local emissions and secondary pollutants cause severe PM2.5 elevation in urban air at the south edge of the North China Plain: Results from winter haze of 2017-2018 at a mega city.

Severe haze occurrence in the north of the North China Plain (NCP) is recognized as a consequence of the regional transport of pollutants initially from the south and then the rapid formation of secondary pollutants in the local air. However, the origin of pollutants causing haze in the southern NCP has not yet been elucidated even through careful data observation. Based on the contents of water-soluble inorganic ions in PM2.5 samples collected during two severe haze episodes in Zhengzhou, a mega city located on the southern edge of the NCP, we estimated the contributions of local primary emissions and secondary pollutants to haze occurrence. On average, Na+, K+, and Ca2+ mainly originated from anthropogenic sources, and their anthropogenic fractions had proportions of 97.5%, 93.9%, and 76.5% in their respective total mass. Anions Cl- and SO42- substantially originated from not only produced substantially via secondary formation but also from primary emissions, and their primary proportions in their respective total mass were 51.1% and 30.8%. In contrast, NH4+ and NO3- were dominated by secondary formation. The increase in PM2.5 was mainly caused by the formation of secondary inorganic (29.1%) and organic species (57.2%) and the primary anthropogenic emissions (12.5%). These results indicated that the haze at the southern edge of the NCP was mainly caused by pollutants in the local areas. Compared to the haze in the northern NCP, the haze in the southern NCP edge had a higher PM2.5 mass concentration and a higher proportion of secondary species, but a lower proportion of primary species, indicating the high heterogeneity of winter haze over the NCP.

A review on the environmental impact of phosphogypsum and potential health impacts through the release of nanoparticles.

Many industrial by-products have been disposed along coastlines, generating profound marine changes. Phosphogypsum (PG) is a solid by-product generated in the production of phosphoric acid (PA) using conventional synthesis methods. The raw material, about 50 times more radioactive as compared to unperturbed soils, is dissolved in diluted sulfuric acid (70%) forming PG and PA. The majority of both, reactive hazardous elements and natural radionuclides, remain bound to the PG. A nonnegligible fraction of PG occurs as nanoparticles (<0.1 µm). When PG are used for e.g., agriculture or construction purposes, nanoparticles (NPs) can be re-suspended by Aeolian and fluvial processes. Here we provide an overview and evaluation of the geochemical and radiological hazardous risks associated with the different uses of PG. In this review, we show that NPs are important residues in both raw and waste materials originating from the uses of phosphate rock. Different industrial processes in the phosphate fertilizer industries are discussed in the context of the chemical and mineralogical composition as well as size and reactivity of the released NP. We also review how incidental NPs of PG impact the global environment, especially with respect to the distribution of rare earth elements (REEs), toxic elements such as As, Se, and Pb, and natural radionuclides. We also propose the application of advanced techniques and methods to better understand formation and transport of NPs containing elements of high scientific, economic, and environmental importance.

Mineralogical similarities and differences of dust storm particles at Beijing from deserts in the north and northwest.

Dust storm particles have been one of the important contributors to global aerosol loading, affecting human health and climate system. Beijing, a megapolitan city, experienced two severe dust storms in spring of 2015, with maximum hourly-mean PM10 mass concentrations exceeding 1000 µg/m3. The first dust storm (Dust 1) was from east area of Gobi Desert about 850 km in the north of Beijing and the second (Dust 2) was from west area of Gobi Desert about 1500 km in the northwest of Beijing. Morphologies and elemental compositions of dust particles were identified using high-resolution electron microscopy. The statistical analysis showed that the number fractions of mineral dust particles during the two dust storm episodes were 85.3% and 95.4%, respectively. Clay minerals were the most abundant among mineral particles, with a number fraction larger than 50%, followed by quartz particles (17.3% and 14.8%) and feldspar. Feldspar and carbonate particles accounted for 14.8% and 3.4% of mineral particles in Dust 1, and 9.9% and 13.6% in Dust 2, with the difference due to the different source areas. When the dust storms directly migrated to Beijing, the occurrence of S-containing mineral particles and the relative weight ratio of S in individual mineral particles were extremely low, indicating limited production of sulfate on the dust-storm particles in the atmosphere, regardless of the differences of source areas, migration paths, and mineralogical components. After the peaks of dust storms passed, the occurrence of S on the mineral particles were much higher, although the relative weight ratios of S in the mineral particles was still very small. This result suggests that most of the mineral particles underwent heterogeneous reactions, but the reaction rates were low.

Study on the Applicability of Reservoir Fractal Characterization in Middle-High Rank Coals with NMR: Implications for Pore-Fracture Structure Evolution within the Coalification Process.

In order to evaluate the applicability of the pore-fracture structure fractal characterizations in coal reservoirs and confirm the internal relationships between the porosity, permeability, coal metamorphic grade, and pore-fracture structure, the pore-fracture features of 21 middle-high rank coal samples from Anhe, Jiaozuo, and Huaibei coalfields in northern China were investigated using a low-field nuclear magnetic resonance (NMR). All the coal samples are characterized by low moisture content (M ad), low and medium ash yield (A ad), and high vitrinite (V) in coal maceral. The adsorption space fractal dimension (D A) is positively correlated with the Langmuir volume (V L) under the three-peak transverse relaxation time (T 2) spectrum. The fractal dimension of all effective T 2 points under saturated water (D NMR) is positively correlated with V L and the adsorption pore volume, but negatively correlated with the volume ratio of seepage pores and fractures. The free flow space fractal dimension (D M) is negatively correlated with the porosity of full saturated water (ΦF) and the porosity of movable water (ΦM). There is a negative correlation between ΦF and the seepage space fractal dimension (D S) in the coal samples with one-peak and two-peak T2 spectra, but a positive correlation can be found with the three-peak T2 spectrum. Therefore, it is necessary to consider the types of T2 spectral peak as a prerequisite to analyze the correlations between pore-fracture parameters and NMR fractal dimensions. With the increase of coal rank, the adsorption pore content, ΦF, and bulk volume immovable (BVI) fraction first increase and then decrease, whereas the seepage pore content, fracture development, bulk volume movable (BVM) fraction, and BVM/BVI first decrease and then increase. The inflection points of these changes correspond to the maximum vitrinite reflectance (R o,max) at 2.6-2.8%, which would be attributed to the third coalification jump. Generally, D A is the fractal dimension representing the coal pore surface, and D S and D M are closely related to the pore structure. Furthermore, D NMR not only represents the roughness of the pore surface but also the complexity of the pore structure.

Volcanically driven lacustrine ecosystem changes during the Carnian Pluvial Episode (Late Triassic).

The Late Triassic Carnian Pluvial Episode (CPE) saw a dramatic increase in global humidity and temperature that has been linked to the large-scale volcanism of the Wrangellia large igneous province. The climatic changes coincide with a major biological turnover on land that included the ascent of the dinosaurs and the origin of modern conifers. However, linking the disparate cause and effects of the CPE has yet to be achieved because of the lack of a detailed terrestrial record of these events. Here, we present a multidisciplinary record of volcanism and environmental change from an expanded Carnian lake succession of the Jiyuan Basin, North China. New U-Pb zircon dating, high-resolution chemostratigraphy, and palynological and sedimentological data reveal that terrestrial conditions in the region were in remarkable lockstep with the large-scale volcanism. Using the sedimentary mercury record as a proxy for eruptions reveals four discrete episodes during the CPE interval (ca. 234.0 to 232.4 Ma). Each eruptive phase correlated with large, negative C isotope excursions and major climatic changes to more humid conditions (marked by increased importance of hygrophytic plants), lake expansion, and eutrophication. Our results show that large igneous province eruptions can occur in multiple, discrete pulses, rather than showing a simple acme-and-decline history, and demonstrate their powerful ability to alter the global C cycle, cause climate change, and drive macroevolution, at least in the Triassic.

Multiple relationships between aerosol and COVID-19: A framework for global studies.

COVID-19 (Corona Virus Disease 2019) is a severe respiratory syndrome currently causing a human global pandemic. The original virus, along with newer variants, is highly transmissible. Aerosols are a multiphase system consisting of the atmosphere with suspended solid and liquid particles, which can carry toxic and harmful substances; especially the liquid components. The degree to which aerosols can carry the virus and cause COVID-19 disease is of significant research importance. In this study, we have discussed aerosol transmission as the pathway of SARS-CoV-2 (Severe Acute Respiratory Syndrome Coronavirus 2), and the aerosol pollution reduction as a consequence of the COVID-19 lockdown. The aerosol transmission routes of the SARS-CoV-2 can be further subdivided into proximal human-exhaled aerosol transmission and potentially more distal ambient aerosol transmission. The human-exhaled aerosol transmission is a direct dispersion of the SARS-CoV-2. The ambient aerosol transmission is an indirect dispersion of the SARS-CoV-2 in which the aerosol acts as a carrier to spread the virus. This indirect dispersion can also stimulate the up-regulation of the expression of SARS-CoV-2 receptor ACE-2 (Angiotensin Converting Enzyme 2) and protease TMPRSS2 (Transmembrane Serine Protease 2), thereby increasing the incidence and mortality of COVID-19. From the aerosol quality data around the World, it can be seen that often atmospheric pollution has significantly decreased due to factors such as the reduction of traffic, industry, cooking and coal-burning emissions during the COVID-19 lockdown. The airborne transmission potential of SARS-CoV-2, the infectivity of the virus in ambient aerosols, and the reduction of aerosol pollution levels due to the lockdowns are crucial research subjects.

Coal Macrolithotype Distribution and Its Genetic Analyses in the Deep Jiaozuo Coalfield Using Geophysical Logging Data.

Coal macrolithotypes are closely correlated with coal macerals and pore-fracture structures, which greatly influence the changes in gas content and the coal structure. Traditional macrolithotype identification in coalbed methane (CBM) wells mostly depends on core drilling observation, which is expensive, time-consuming, and difficult for broken core extraction. Geophysical logging is a quick and effective method to address this issue. We obtained coal cores from 75 wells in the deep regions of the Jiaozuo Coalfield, northern China, quantitatively analyzed the logging cutoff number corresponding to various macrolithotypes, and established natural γ (GR), deep lateral resistivity (LLD), and γ-γ log (GGL) response rules for each coal macrolithotype. The formation mechanisms of different coal macrolithotypes are discussed from the perspective of coal facies and pore structures. The results show that GGL decreased but GR and LLD increased from bright coal to dull coal. Most coal macrolithotypes can be distinguished based on the established thresholds of various logging curves. However, excessively high or low ash yields significantly affect the validity of identification. The vertical coal macrolithotypes attributed to the peat marsh environment in Shanxi Formation mostly comprise three to six sublayers; dull or semi-dull coals are predominant close to the 21 coal seam, and the bright or semi-bright types usually appear in the middle part. The semi-bright and bright coals are usually vitrinite rich, whereas the semi-dull and dull coals are primarily inertinite rich. For pore structure arguments, the highest average specific surface area (S BET) and the total pore volume (V BJH) are found in bright coals, followed by dull and semi-bright coals; those of semi-dull coals are the lowest. However, S BET and VBJH change significantly for different samples, even though the coal macrolithotype is the same. Therefore, the macrolithotype is not the key factor determining the coal parameters of pore structures. Rapid and effective identification of coal macrolithotypes can help determine the CBM enrichment area, the CBM well location, and the exploration horizon.