RESUMEN
BACKGROUND We used the 14-item Oral Health Impact Profile-14 (OHIP-14) questionnaire to evaluate the association between sociodemographic variables and oral health-related quality of life in 241 wearers of removable partial or complete dentures attending a single center in Yemen. MATERIAL AND METHODS A total of 241 partial dentures (PD) and complete dentures (CD) wearers were enrolled from the Department of Prosthodontics at the Faculty of Dentistry, Sana'a University, and the University of Science and Technology. Data were collected before the commencement of denture wearing and after 3-6 months of denture use. The questionnaire consisted of sociodemographic information and denture type, and another for the OHIP to assess oral health-related quality of life (OHRQoL), oral health impact profile scale comprises 7 subscales, each evaluating different aspects of oral health and functionality. Descriptive statistics were calculated for participants. Independent t tests were performed to compare different patient groups, focusing on PD and CD wearers. Paired-sample t tests were used to examine changes within patient groups before and after removable denture use. RESULTS Among all participants, 67.6% were male, wearers of CDs were 74.6% male, PDs were 58.3%, and was consistent for CD (71.0%) and PD (72.8%) wearers. The wearing prostheses significantly impacted the OHRQoL of patients using both PDs and CDs (P<0.01). Among CD wearers, 4 of these subscales (3-6) were statistically significant, but the handicaps subscale showed evident reductions in physical pain after treatment among PD wearers. CONCLUSIONS Wearing dentures positively affects the OHRQoL of patients, influencing various aspects of their health, including functional, physical, psychological, and social well-being.
Asunto(s)
Salud Bucal , Calidad de Vida , Humanos , Calidad de Vida/psicología , Masculino , Femenino , Estudios Transversales , Persona de Mediana Edad , Yemen , Encuestas y Cuestionarios , Anciano , Dentadura Parcial Removible/psicología , Dentadura Completa/psicología , Adulto , Dentaduras/psicologíaRESUMEN
Telemedicine technologies allow distribution of health-related services and information and can include electronic and telecommunication technologies, remote patient and clinician contact, referral and prescribing, patient education, and monitoring. This systematic review aimed to evaluate publications on the perceptions and management of chronic medical conditions using telehealth remote consultations by primary healthcare professionals between April 2020 and December 2021 during the COVID-19 pandemic. Electronic databases, including Cinhal, PubMed, Science Direct, and ProQuest were searched to extract qualitative studies relevant to the topic. Inclusion criteria were developed based on the Population, Exposure, and Outcomes scoping framework. The target population was healthcare professionals working in primary care settings. Included studies encompassed various types of telemedicine, such as synchronous telemedicine, video conferencing, telephone conversations, and smart devices. Eight studies were included. Synchronous telemedicine was highly effective in ensuring the continuity of care and treatment, providing patients with convenience, improved access to treatment, and earlier disease management. Video conferencing and telephone consultations were the most common methods used. Challenges included concerns about patient privacy, technology literacy, and acceptance. Telemedicine was commended for its ability to provide access to immediate expert medical advice and eliminate the need for long-distance travel, contributing to increased patient compliance. Synchronous telemedicine is a promising solution for managing chronic conditions during and after the COVID-19 pandemic, offering benefits to patients and healthcare professionals. To maximize its potential, concerns regarding patient privacy, confidentiality, and technology literacy need to be addressed. Proper legislation and regulations are required for long-term success of telemedicine, making it a valuable component of healthcare systems.
Asunto(s)
COVID-19 , Personal de Salud , Pandemias , Atención Primaria de Salud , Consulta Remota , Telemedicina , Humanos , COVID-19/epidemiología , COVID-19/terapia , Enfermedad Crónica/terapia , Personal de Salud/psicología , SARS-CoV-2 , Manejo de la Enfermedad , Comunicación por VideoconferenciaRESUMEN
BACKGROUND We investigated the bond strength, tensile strength, and water absorption properties of 4 widely used chairside silicone long-term denture soft lining materials and compared properties with those of heat-cured silicone material. MATERIAL AND METHODS Four chairside materials (GC Reline Soft, Mucopren Soft, Sofreliner Soft, and Elite Soft Relining) and a heat-cured silicone material (Molloplast B) were investigated. For tensile and shear bond strength and tensile strength, samples were prepared according to the manufacturers' instructions and the testing machine used. For water absorption, IOS 1567 was followed to prepare specimens. Bond strengths were measured using a Lloyd Instruments materials testing machine. Ten specimens for each test were prepared for each soft liner, except for water absorption and solubility tests, for which only 5 specimens were prepared. ANOVA, Bonferroni, and Kruskal-Wallis tests were used to compare values of materials and assess changes over time. RESULTS There was strong evidence of differences in the properties between materials. GC Reline Soft showed comparable tensile bond (1.4±0.6 MPa), shear bond (1.1±0.4 MPa), tensile strength (5.44±0.98), water absorption (0.92±0.2 µg/mm³), and solubility values (0.3±0.2 µg/mm3) to that of Molloplast B (1.4±0.4; 1.6±0.5; 4.53±0.9 MPa, 1.7±0.3, and 1.0±0.3 µg/mm³, respectively). The water solubility of Sofreliner Soft was significantly lower (1.5±0.8 µg/mm³) than that of Molloplast B. CONCLUSIONS There were significant differences between some properties of 4 chairside denture soft lining materials and that of Molloplast B, which had higher shear and tensile bond strength than chairside denture silicone soft lining materials but had the highest water solubility.
Asunto(s)
Recubrimiento Dental Adhesivo , Alineadores Dentales , Calor , Ensayo de Materiales , Elastómeros de Silicona/química , Agua , Resistencia a la Tracción , Bases para Dentadura , Propiedades de SuperficieRESUMEN
BACKGROUND This study, employing an online questionnaire, aimed to assess and contrast the awareness, knowledge, and perceptions of dentists in Saudi Arabia (SA) regarding endocrowns (EC) as post-endodontic restorations with those of dentists educated in various other countries. MATERIAL AND METHODS We conducted a cross-sectional survey among dental interns and practicing dentists in government facilities, private dental centers, and dental colleges in SA, including participants of diverse nationalities. We disseminated validated, closed-ended questionnaires through WhatsApp via Google Forms. The Chi-square test was applied to assess associations between categorical variables, with a P-value of ≤0.05 indicating statistical significance. RESULTS The majority of participants (61.2%) indicated that EC restorations are best suited for molar teeth. Furthermore, 69.6% asserted that the primary objective of employing EC is to accomplish minimally invasive preparations while preserving the existing tooth structure. Among the responses, 68.3% pinpointed debonding of ECs as a significant cause of failure. Notably, substantial differences were observed in responses concerning the knowledge or practice of EC across various factors such as gender, educational attainment, country of graduation, and workplace. CONCLUSIONS The findings reveal a comparatively low adoption of ECs among the participants, irrespective of experience or country of education. This underscores the need for incorporating ECs into dental curricula through theoretical and clinical discussions or considering them as a subject for post-graduate continuing education programs.
Asunto(s)
Curriculum , Diente Molar , Humanos , Estudios Transversales , Escolaridad , OdontólogosRESUMEN
BACKGROUND: Advances in digital dentistry lead to use of three-dimensional (3D) printed resin denture teeth. Fracture toughness of these teeth must be assessed. OBJECTIVE: This study aimed to compare the chipping and indirect tensile fracture resistance of denture teeth fabricated by 3D printing technique with traditionally fabricated resin denture teeth. METHOD: Four groups (Gr) were made (n= 50/group): Gr-1 3D printed denture teeth (denture teeth; Formlabs Inc., Somerville, MA, USA), Gr-2 SR-Orthosit-PE (Ivoclar Vivadent AG), Gr-3 Portrait IPN (Dentsply Sirona), Gr-4 Pala Premium 8 (Heraeus Kulzer GmbH). Stereolithography 3D printing was used to create the methacrylate-based photopolymerized resin teeth models and remaining group teeth were collected commercially. A 1 mm/min chipping and indirect tensile fracture speed tests were carried out till fracture occurred. The data so obtained were statistically analysed using one-way analysis of variance with Tukey's honestly significant difference multiple comparisons test (p< 0.05). At the end of the test, the fractured areas of the specimens were evaluated by the chief researcher to assess the fracture pattern of the teeth. RESULTS: The indirect tensile fracture values of the 3D printed teeth were more than that of Pala Premium-8 and SR-Orthosit-PE but it was lower than that of Portrait IPN teeth. In chipping test, buccal chipping of the loaded cusp was seen in 3D printed resin without distortion and in indirect tensile test in 3D printed resin teeth, line of fracture emerges near the loading point propagates from the inner incline of both cusps and extends cervically, unlike in other groups where first deformation occurs then fracture. CONCLUSION: Prosthetic teeth fabricated by the 3D printing technique using printable resin material provide adequate fracture resistance as denture teeth.
Asunto(s)
Dentaduras , Impresión Tridimensional , Humanos , Ensayo de Materiales , Propiedades de SuperficieRESUMEN
BACKGROUND: Production of reactive oxygen species (ROS) by polymorpho nuclear neutrophils occurs in chronic periodontitis. These ROS are mainly involved in bacterial destruction. However, extracellular release of same results in destruction of surrounding tissue. Spirulina, a potent antioxidant when administered sub gingivally in pockets can offer improved results in chronic periodontitis patients. This study was conducted to evaluate the effect of Spirulina when delivered sub gingivally in patients with chronic periodontitis. METHODS: Sixty chronic periodontitis patients were divided into 2 groups. Group I (nâ =â 30) were treated with Scaling and Root planning (SRP) followed by placement of placebo (SRP-P) and in Group II (nâ =â 30) Spirulina microspheres were placed sub gingivally (SRP-S) following SRP. Clinical parameters like bleeding on probing (BOP), clinical attachment level (CAL), gingival index (GI) and probing pocket depth (PPD) were evaluated. Levels of salivary and serum Malondialdehyde (MDA) were estimated using ultra violet spectrophotometer. RESULTS: At baseline, in both groups there was no statistically significant difference in clinical and biochemical parameters. Intra group comparisons of parameters from baseline to 90 days were statistically significant in both groups. After 90 days difference in clinical parameters and salivary MDA levels were statistically significant in SRP-S compared to SRP-P group. Though serum MDA levels were reduced in both groups, they were not significant statistically. CONCLUSIONS: Our study concluded that, local drug delivery of Spirulina adjunctive to SRP has potent antioxidant effect in treatment of chronic periodontitis.
Asunto(s)
Periodontitis Crónica , Spirulina , Humanos , Periodontitis Crónica/tratamiento farmacológico , Antioxidantes/uso terapéutico , Especies Reactivas de Oxígeno , Aplanamiento de la Raíz/métodos , Raspado DentalRESUMEN
CAD/CAM technology is gaining popularity and replacing archaic conventional procedures for fabricating dentures. CAD/CAM supports using a digital workflow reduce the number of visits, chair time, and laboratory time, making it attractive to patients. This study aimed to provide a comparative review of complete dentures manufactured using CAD/CAM and conventional methods. The PubMed/Medline, Science Direct, Cochrane, and Google Scholar databases were searched for studies published in English within the last 11 years (from 2011 to 2021). The keywords used were "computer-engineered complete dentures", "CAD/CAM complete dentures", "computer-aided engineering complete dentures", and "digital complete dentures". The search yielded 102 articles. Eighteen relevant articles were included in this review. Overall, computer-engineered complete dentures have several advantages over conventional dentures. Patients reported greater satisfaction with computer-engineered complete dentures (CECDs) due to better fit, reduced chair time, shorter appointments, and fewer post-insertion visits. CAD/CAM allows for precision and reproducibility with fewer procedures compared to conventional dentures. Polymethyl methacrylate is used as the denture base material for conventional dentures. For CECDs, the resin can be modified and cross-linked to improve its mechanical properties. The advantages of CECDs include a reduced number of appointments, saving chairside time, a digital workflow allowing easy reproducibility and greater patient satisfaction with a better fit.
RESUMEN
BACKGROUND Miswak is a form of chewing stick used to clean teeth in different parts of the world, including Saudi Arabia. We present a description of the effects of miswak derivatives, namely toothpaste, mouthwash, and brushing sticks, on the mean color changes (DE00), compressive fracture resistance values, and fracture modes of polymer-based computer-aided design (CAD) and computer-aided manufactured (CAM) prosthetic materials. MATERIAL AND METHODS Eighty-one rectangular-shaped samples were prepared from lithium disilicate glass-ceramic (IPS e.max CAD), zirconia-reinforced lithium silicate (Vita Suprinity), and monochromatic tooth-colored feldspar (Vitablocs Mark II) CAD/CAM ceramics. The color parameters were recorded using spectrophotometer before and after exposing the specimens to the different miswak oral hygiene derivatives for 15 days. Compressive fracture resistance values and fracture types were also assessed, and statistical analysis was performed. RESULTS Vita Suprinity and Vitablocs Mark II miswak sticks had the highest ΔE00 values. Moreover, miswak mouthwash had the lowest ΔE00 values, with significant differences among groups. IPS e.max CAD miswak sticks had the highest mean values of compressive fracture. Vitablocs Mark II had the lowest values for mouthwash and toothpaste. Significant differences were found within the IPS e.max CAD group. Reparable fractures were found in IPS e.max CAD, while semi-reparable fractures were seen in other groups. CONCLUSIONS Most ΔE00 values were within the acceptable clinical range, with IPS e.max CAD showing superior color stability. The mouthwash group showed minimal ΔE00. IPS e.max CAD had the highest mean compressive fracture resistance values with reparable fracture types.
Asunto(s)
Antisépticos Bucales , Polímeros , Cerámica , Color , Diseño Asistido por Computadora , Computadores , Porcelana Dental , Ensayo de Materiales , Antisépticos Bucales/farmacología , Propiedades de Superficie , Pastas de DientesRESUMEN
Purpose: Dentists face a great deal of professional stress, in dental school and in practice. Their personal, as well as professional lives, get affected negatively by stress and poor mental health. This study aims to evaluate anxiety and depression among dentists of Abha in kingdom of Saudi Arabia. Materials and Methods: A cross-sectional study was carried out among 246 registered dentists of Abha to assess anxiety and depression. Participants willing to participate, and completely filled questionnaire were included in study. Data regarding demography, work-related characters, lifestyle and self-reported physical and mental status were collected. Mental status was measured by using pre validated questionnaire Zung Self-Rating Anxiety Scale (SAS) and the Zung Self-Rating Depression Scale (SDS). Data were analyzed using Statistical Package for Social Sciences (SPSS 20) by IBM. Descriptive statistics, Pearson correlation, independent t test and one way ANOVA were used to analyze the data at the significant interval of p≤0.05. Results: Different levels of anxiety and depression were noticed both in males and female dentist. There was no statistical difference in the mean scores between males and females. There was a statistical difference of anxiety and depression scores noticed among dentist working in government institution, with five to ten years of experience. Habits of smoking were shown to significantly affect the risk of anxiety and depression scores. Conclusion: Dentist due to nature of the practice are prone for anxiety and clinical depression. Stress coping methods should be included in dental curriculum which would indirectly improve professional abilities and personal life.
RESUMEN
BACKGROUND This spectrophotometric study assessed the color stability of CAD/CAM restorative materials with different exposed surfaces following staining by hot Arabic Qahwa and cold coffee. MATERIAL AND METHODS Ninety-six specimens were fabricated from 3 different CAD/CAM ceramic materials: Vita Suprinity (Vita-S), Vita Enamic (Vita-E), and Vitablocs Mark II (Vitablocs-MII). We divided 32 specimens for each group into glazed or polished surfaces, with 16 specimens in each group, then subdivided them according to staining materials: Arabic Qahwa and Frappuccino Cold Coffee. Color of specimens was measured during immersion in staining materials (BEFORE) as baseline with (Vita classic) and (L, a, b), for average color changes (ΔE00), then remeasured after 2, 4, and 12 weeks, and described as 1st, 2nd, and 3rd measurements for VITAPAN Classic shade and T1, T2, and T3 for ΔE00 values using the CIE L*a*b* equation. We performed ANOVA and then post hoc testing. RESULTS We found significant differences in ΔE00 values during immersing in hot Arabic Qahwa and cold coffee for tested materials in glazed or polished specimens. Polished specimens of Vita-S and Vita-E had the highest color changing and staining compared to glazed surfaces. Vitablocs-MII had the best color stability through immersion periods. Moreover, there were changes in relation to VITAPAN Classic shade guide for both Vita-S and Vita-E specimens during different immersion periods. CONCLUSIONS Coffee caused staining and contamination of ceramic material. Values of ΔE00 for tested ceramic materials were significantly different but were within the clinically acceptable range. Polished specimens showed higher staining; therefore, we highly recommend re-glazing of ceramic restorations to maintain color stability.
Asunto(s)
Cerámica/química , Café/química , Colorantes/química , Diseño Asistido por Computadora , Ensayo de Materiales/métodos , Color , Técnicas In Vitro , Espectrofotometría/métodos , Temperatura , TiempoRESUMEN
BACKGROUND: The purpose of this study evaluates and compares the effect of surface roughness (Ra) and color stability on computer-aided design/computer-aided manufacturing (CAD/CAM) hybrid resin (Vita Enamic), feldspathic (Vitablocs® Mark II), and lithium disilicate Zirconia (Vita Suprinity) glazed or polished ceramics immersed in hot Arabic Qahwa and cold coffee. METHODS: A total of 96 standardized samples were prepared from CAD/CAM restorative materials. Half of the samples were polished as per the manufacturer's instructions using a porcelain polishing kit, and the other half were glazed. Samples were distributed and immersed in hot Arabian Qahwa and cold coffee followed by thermocycling. Ra measurements and color changes were conducted before and after immersion. SEM images were captured from each type of glazed or polished ceramic. One-way ANOVA paired Student's t-test, and Bonferroni test were conducted to detect significant difference between the groups. P > 0.05 was a significant level. RESULTS: Of all the tested samples, Ra increased without any significant difference; however, mean color changes (ΔE*) showed significant differences. An increase in Ra was noted for all the glazed and polished samples after immersion and thermocycling. However, differences were significant only in VM II. In addition, ΔE* was significant only in Vita Suprinity (VS) samples. For immersion groups, significant Ra changes were noticed in glazed samples, only in Vita Enamic (VE) with no ΔE*. In polished samples, mean Ra changes were observed in VM II and VS samples. Significant differences were also noticed in polished VE and VS subgroups of ΔE*. CONCLUSIONS: Ra affects all the tested samples, providing higher values on the polished specimens. The ΔE* caused by hot Arabic Qahwa and cold coffee on glazed or polished CAD/CAM restorative materials were clinically acceptable.
Asunto(s)
Café , Inmersión , Cerámica , Color , Diseño Asistido por Computadora , Humanos , Ensayo de Materiales , Propiedades de Superficie , CirconioRESUMEN
INTRODUCTION: Drug induced oral erythema multiforme a rare clinical entity which involves only the lips and oral mucosa without skin involvement. These lesions are difficult in diagnosing with other oral ulcerative lesions with similar clinical manifestations. PATIENT CONCERNS: This article presents 2 case reports of Oral erythema multiforme in which drugs were the precipitating factor. Its etiopathogenesis, differential diagnosis and treatment modalities of the disease is discussed. DIAGNOSIS: Based on patient's complaints, drug history and clinical appearance, provisional diagnosis of drug induced erythema multiforme was considered. INTERVENTION: For case 1, patient was instructed to discontinue usage of drug and prescribed systemic steroid (Prednisolone 10âmg/d) for a week along with germicidal drugs to prevent secondary infection. Medication was tapered to 5âmg/d after first week.For case 2, patient was instructed to discontinue the drug and systemic steroid prednisolone 20âmg /d for 1 week with tapering dose of 10âmg/d for the second week was administered. OUTCOME: For case 1 and case 2 healing of the lesions were evident on third week of follow up. CONCLUSION: Medications should be taken under medical supervision. Over the counter drugs might lead to allergic reactions like drug induced oral erythema multiforme, which is a rare variant and needs to be differentiate from other oral ulcerative lesion for prompt management and follow-up.
Asunto(s)
Acetaminofén/efectos adversos , Diclofenaco/efectos adversos , Eritema Multiforme/inducido químicamente , Úlceras Bucales/inducido químicamente , Adolescente , Adulto , Diagnóstico Diferencial , Eritema Multiforme/diagnóstico , Humanos , Labio/patología , Masculino , Mucosa Bucal/patología , Úlceras Bucales/diagnósticoRESUMEN
PURPOSE: The aim of this study was to compare the preclinical and clinical undergraduate dental students' perceptions of their educational climate (EC). In addition it will be compared with other local and international studies. MATERIALS AND METHODS: Students enrolled in their third and fourth years (preclinical phase) and students in their fifth and sixth years (clinical phase) of the Bachelor of Dental Science at the University of Jazan, Saudi Arabia, were invited to complete a WhatsApp media survey, which included demographics and the Dundee Ready Education Environment Measure (DREEM). This scale measured students' overall perceptions of the EC in five domains: learning, teaching, academic self-perception, atmosphere, and social self-perception. Data were analyzed with Student's t-tests and ANOVA to compare between and within groups. RESULTS: A total of 272 participants, 140 (51.5%) preclinical and 132 (48.5%) clinical students,took part in the study. Students were generally positive about their learning climate, with overall DREEM scores of 125.19 and 126.21 (preclinical) to 124.10 (clinical) out of a possible score of 200 phases. Student's perceptions of teaching (26.18±3.24/72.72%) and atmosphere (28.08±5.29/63.82%) were the highest and lowest scores, respectively, and both scores were positive. CONCLUSION: No differences between the preclinical and clinical phases of the curriculum point to the structure of learning, teaching, academic, social self-perception in health professional degrees. Further research should investigate the weak points in the social and atmospheric climate.
RESUMEN
Background and Objectives: Khat chewing is considered as a daily habit that is practiced by more than five million people globally. The effect of khat chewing on the surface roughness and the color stability of natural teeth and the material used in the fabrication of dental prosthesis remains unknown. This study was conducted to explore and compare the effect of khat homogenate (KH) on the surface roughness (Ra) and the average color changes (ΔE*) amongst natural teeth and selected shades from different porcelain types, namely, feldspathic metal ceramic (MC) VM13, computer-aided design/computer assisted manufacture (CAD/CAM) feldspathic (Vitablocs Mark II), and multilayer zirconia (Ceramill Zolid PS) porcelains. Materials and Methods: Seventy samples were prepared from natural teeth, feldspathic MC, CAD/CAM Vitablocs Mark II, and zirconia porcelain. The Ra values were measured using a profilometer and expressed in micrometers, whereas the ΔE* values were measured using VITA Easyshade® V spectrophotometer for all samples before and after frequent immersion and thermocycling in KH for 30 days. The surface topography was used to assess the materials surfaces (glazed or polished) after KH immersion by using a white light interferometry machine. Results: Results revealed that the Ra and the ΔE* values of the different types of tested porcelain were influenced by KH. The order of surface roughness values was glazed or polished MC > polished Zircon > polished Vitablocs Mark II > natural teeth. The lowest ΔE* values were recorded for glazed Vitablocs Mark II and MC, and the values could be arranged as polished zircon > natural teeth > glazed zircon > polished MC > polished Vitablocs Mark II. P values were significantly varied (< 0.001) among all the tested groups, except the zircon group (>0.05) for both Ra and ΔE*. Conclusion: KH significantly affected both surface parameter and color of glazed or polished porcelain materials and natural teeth.
Asunto(s)
Catha/efectos adversos , Esmalte Dental/efectos de los fármacos , Porcelana Dental , Color , HumanosRESUMEN
BACKGROUND The habit of khat (Catha Edulis Forskal) chewing is widely practiced in the southern regions of Saudi Arabia, Yemen, and East Africa. This social habit has tremendous effects on oral and general health of khat chewers. Khat may affect bacterial species in plaque biofilms on oral rehabilitation materials. This preliminary case-controlled study aimed to assess and compare the effect of khat chewing on bacterial biodiversity between non-khat chewers (NKC) and khat chewers (KC) in oral biofilms on oral rehabilitation materials using polymerase chain reaction (PCR). MATERIAL AND METHODS Fifty participants were organized into 2 equal groups of NKC and KC, each containing 5 subgroups related to filling material type. Some participants had amalgam (A) or composite (C) restorations, while others had feldspathic porcelain (FP), nickel chromium (NC), and zirconia ceramic (ZC) crowns or bridges. Oral biofilm samples were collected from all participants, DNA was extracted, and samples were subjected to PCR. Bacterial species were then identified and counted. PCR products were sequenced to detect similarity. Partial 16S rRNA gene sequences of the current study samples were compared with 16S rRNA gene sequences from GenBank using BLAST on the National Center for Biotechnology Information website. RESULTS The Streptococcus sp. was the most common bacterial species among our participants (40; 80%), followed by Lactobacillus and Veillonella spp., accounting for 12% (6) and 8% (4), respectively. Streptococcus sp. was observed equally among NKC and KC, but Lactobacillus and Veillonella spp. were higher in KC and NKC, respectively. Lactobacillus was associated mainly with prosthetic materials, and Streptococcus was found among all examined dental restorative materials. CONCLUSIONS This research concluded that khat chewing significantly affects bacterial biodiversity in oral biofilms in the presence of different restorative and prosthetic dental materials.
Asunto(s)
Catha/química , Masticación , Microbiota , Bacterias/aislamiento & purificación , Materiales Dentales , Femenino , Humanos , Masculino , FilogeniaRESUMEN
BACKGROUND: Nowadays khat chewing habit is increasing among population in southern part of Saudi Arabia, Jazan and till date there is no literature investigating the effect of khat on oral biofilm on dental materials. OBJECTIVE: To evaluate and compare the bacterial biofilm on different types of dental restorative materials used in replacing missing tooth structures among khat chewers and non-khat chewers. MATERIALS AND METHODS: Hundred and twenty biofilm samples were collected from different dental restorations, such as All-ceramic (AL), Metal Ceramic (MC), Metal crowns or bridges (M), Composite (C), Glass Ionomer (GI) and Amalgam (A) restorations in non-khat and khat chewers (K). DNA extraction was done and subjected to PCR. Bacterial species, such as Streptococcus, Neisseria, Bacillus, Granulicatella and Veillonella were identified and counted. PCR products were also sequenced to detect similarity. Association between bacterial type and dental materials among non-khat and khat chewers were tested with Chi-Square test (Fishers Exact test). RESULTS: The frequency and percentage of Streptococcus species were marginally higher among khat chewers (42; 70%) compared with non-khat chewers (38; 63.3%) group. But the Veillonella species were higher among non-khat chewers (9: 15%), compared to the khat chewers group (7; 11.7%). No statistically significant difference was detected among species in both groups. In non-khat and khat chewer group, the maximum hits were related to Streptococcus spp. in glass ionomer, amalgam, and composite (restorative materials), followed by metal ceramic and metal (prosthetic materials). Veillonella spp. showed maximum hits in the metal group among non-khat chewers and in all-ceramic among khat chewers. Statically significant differences were recorded among composite and amalgam samples with p values 0.047 and 0.036 in khat chewer group. CONCLUSION: Khat chewers showed statistically significant differences in oral biofilm in the composite and amalgam restorative materials, but there were no significant differences found among any materials and species between the groups.
Asunto(s)
Biopelículas/efectos de los fármacos , Catha/química , Materiales Dentales , Prótesis Dental/microbiología , Masticación , Streptococcus/crecimiento & desarrollo , Adolescente , Adulto , Anciano , Biopelículas/crecimiento & desarrollo , Estudios de Casos y Controles , Estimulantes del Sistema Nervioso Central/farmacología , Resinas Compuestas , Amalgama Dental , Femenino , Humanos , Masculino , Microbiota/efectos de los fármacos , Persona de Mediana Edad , Salud Bucal , Arabia Saudita , Adulto JovenRESUMEN
AIM: This study aimed to evaluate the fracture resistance strength of different post systems in endodontically treated teeth. MATERIALS AND METHODS: Freshly extracted 60 single-rooted first premolars were selected for this study. Conventional step-back technique was used to prepare a canal for all the teeth. Obturation was carried out and post space was created using a Peeso reamer. All teeth were randomly divided into three groups of 20 samples in each group: Group I, teeth inserted with prefabricated carbon posts; Group II, teeth inserted with prefabricated zirconia posts; and Group III, teeth inserted with prefabricated everStick posts. Core buildup was performed using light-cured composite resin. Compressive load required to fracture the tooth was measured using a universal testing machine. RESULTS: The compressive strength of zirconia posts was highest with a mean of 796.10 ± 20.78 followed by carbon posts (628.22 ± 18.11) and lower compressive strength was exhibited by everStick posts (534.13 ± 19.98). An analysis of variance revealed a statistically highly significant difference (P < 0.005) among the different posts used, and a statistically significant difference between carbon posts vs. zirconia posts, carbon posts vs. everStick posts, and zirconia posts vs. everStick posts (P < 0.05). CONCLUSION: Zirconia posts show the maximum fracture resistance than the carbon posts and everStick posts.
RESUMEN
Ameloblastomas with multiple histologic variants are rare odontogenic neoplasm of mandible and maxilla, and have high recurrence rates if improperly treated. They are histologically benign, slow growing, and invasive tumors. These tumors are asymptomatic in nature, unless they attain a large size to cause expansion and perforation of adjacent tissues, for which patient might seek treatment. Due to their aggressive nature and high recurrence rate, treatment remains a matter of debate. Complete excision of lesion with least morbidity would be the therapeutic challenge. However, there is an increased risk of recurrence due to local treatment. Here in, we present a large multicystic recurrent ameloblastoma on right-body-ramus region of mandible in a 45-year-old woman who was managed by hemimandibulectomy.
RESUMEN
Abstract Objective: To determine the proportion of Saudi population in the Asir region that displayed discordance between the facial and maxillary midline and intermaxillary midline, to form an informative guideline for esthetic rehabilitation of patients. Material and Methods: We evaluated 2418 Saudi citizens using positioning guides of the orthopantomography machine to record the relationship of the dental midline to the facial midline. The relationship of the maxillary midline to that of the mandible was observed clinically, and diagnostic mounting of particular cases was performed for confirmation. The examination was carried out by four trained observers (two dentists and two radiology technicians) to overcome the parallax effect. The cases with disagreements were repeated. The record was grouped into (1) coincidence, (2) deviation of the mandible to the right, and (3) deviation to the left. The relationship between facial-dental midline concordance and intermaxillary concordance was assessed using the Chi-squared test Results: Facial and maxillary midline did not coincide in 42.5% participants, whereas intermaxillary midline discordance was observed in 51.5%. Among those exhibiting discordance, 57% had right discordance and 43% had left discordance Conclusion: A significant proportion of the population displayed discordance between the facial-maxillary midline as well as the intermaxillary midline. The female population showed not only a higher number of intermaxillary discordance than males but also a significant number of intermaxillary discordance towards the right.
Asunto(s)
Humanos , Masculino , Femenino , Adolescente , Adulto , Persona de Mediana Edad , Arabia Saudita/epidemiología , Reproducibilidad de los Resultados , Asimetría Facial , Maloclusión/diagnóstico , Radiografía Panorámica , Distribución de Chi-CuadradoRESUMEN
Pain of the tempro-mandibular joint (TMJ) has a direct bearing to missing teeth and excessive physical activity. Consumption of qat requires chewing on the leaves to extract their juice for long hours. A 65-year-old male Yemeni patient, a Qat chewer, reported to the university dental hospital at King Khalid University complaining of pain in left temporomandibular joint with missing mandibular anterior teeth. A multidisciplinary approach for the overall treatment of the patient was decided. Initial treatment was the relief of patient's pain with the help of a night guard. This was followed by a fabrication of anterior FPD. The case was under maintenance and follow-up protocol for a period of 8 months with no complaint of pain discomfort.