Nanocatalysis in cathode pre-lithiation for lithium-ion batteries: progress and challenges.

Pre-lithiation, which is capable of supplying additional active lithium sources to lithium-ion batteries, has been widely accepted as one of the most promising approaches for addressing the issue of active lithium loss during the entire process of initial charging and subsequent cycling. In comparison with anode pre-lithiation, cathode pre-lithiation exhibits a facile operating procedure and good compatibility with current lithium-ion battery production processes. However, cathode pre-lithiation additives suffer from high decomposition voltage and low decomposition efficiency. In view of this, a variety of nanocatalysts have been developed in recent years to enhance the decomposition kinetics of cathode pre-lithiation additives. Nevertheless, a comprehensive review of nanocatalysis in cathode pre-lithiation is still lacking. This timely review aims to present the crucial role of nanocatalysis in cathode pre-lithiation and provide an up-to-date overview of this field. After demonstrating the significance of nanocatalysts for cathode pre-lithiation, recent progress in the application of nanocatalysts for high-efficiency cathode pre-lithiation is briefly introduced. Finally, future challenges and directions for the commercialization of the cathode pre-lithiation technique in conjunction with nanocatalysts are reviewed. The current review provides important insights into nanocatalysis as a cutting-edge strategy for favorable cathode pre-lithiation and builds a bridge between academic research and industrial applications of nanocatalytic cathode pre-lithiation for lithium-ion batteries with high capacity and good cyclability.

Hydrogen evolution driven by heteroatoms of bidentate N-heterocyclic ligands in iron(II) complexes.

While Pt is considered the best catalyst for the electrocatalytic hydrogen evolution reaction (HER), it is evident that non-noble metal alternatives must be explored. In this regard, it is well known that the binding sites for non-noble metals play a pivotal role in facilitating efficient catalysis. Herein, we studied Fe(II) complexes with bidentate 2-(2'-pyridyl)benzoxazole (LO), 2-(2'-pyridyl)benzthiazole (LS), 2-(2'-pyridyl)benzimidazole (LNH), and 2-2'-bipyridyl (Lpy) ligands - by adding trifluoroacetic acid (TFA) to their acetonitrile solution - in order to examine how their reactivity towards protons under reductive conditions could be impacted by the non-coordinating heteroatoms (S, O, N, or none). By applying this ligand series, we found that the reduction potentials relevant for HER correlate with ligand basicity in the presence of TFA. Moreover, DFT calculations underlined the importance of charge distribution in the ligand-based LUMO and LUMO+1 orbitals of the complexes, dependent on the heterocycle. Kinetic studies and controlled potential electrolysis - using TFA as a proton source - revealed HER activities for the complexes with LNH, LO, and LS of kobs = 0.03, 1.1, and 10.8 s-1 at overpotentials of 0.81, 0.76, and 0.79 V, respectively, and pointed towards a correlation between the kinetics of the reaction and the non-coordinating heteroatoms of the ligands. In particular, the activity was associated with the [Fe(LS/O/NH)2(S)2]2+ form (S = solvent or substrate molecule), and the rate-determining step involved the formation of [Fe(H-H)]+, during the weakening of Fe-H and CF3CO2-H bonds, according to the experimental and DFT results.

Polyacrylate modified Cu electrode for selective electrochemical CO2 reduction towards multicarbon products.

Highly selective production of value-added multicarbon (C2+) products via electrochemical CO2 reduction reaction (eCO2RR) on polycrystalline copper (Cu) remains challenging. Herein, the facile surface modification using poly (α-ethyl cyanoacrylate) (PECA) is presented to greatly enhance the C2+ selectivity for eCO2RR over polycrystalline Cu, with Faradaic efficiency (FE) towards C2+ products increased from 30.1% for the Cu electrode to 72.6% for the obtained Cu-PECA electrode at -1.1 V vs. reversible hydrogen electrode (RHE). Given the well-determined FEs towards C2+ products, the partial current densities for C2+ production could be estimated to be -145.4 mA cm-2 for the Cu-PECA electrode at -0.9 V vs. RHE in a homemade flow cell. In-situ spectral characterizations and theoretical calculations reveal that PECA featured with electron-accepting -C≡N and -COOR groups decorated onto the Cu electrode could inhibit the adsorption of *H intermediates and stabilize the *CO intermediates, given the redistributed interfacial electron density and the raised energy level of d-band center (Ed) of Cu active sites, thus facilitating the C-C coupling and then the C2+ selective production. This study is believed to be guidable to the modification of electrocatalysts and electrodes with polymers to steer the surface adsorption behaviors of reaction intermediates to realize practical eCO2RR towards value-added C2+ products with high activity and selectivity.

Defect Engineering Simultaneously Regulating Exciton Dissociation in Carbon Nitride and Local Electron Density in Pt Single Atoms Toward Highly Efficient Photocatalytic Hydrogen Production.

The high exciton binding energy (Eb) and sluggish surface reaction kinetics have severely limited the photocatalytic hydrogen production activity of carbon nitride (CN). Herein, a hybrid system consisting of nitrogen defects and Pt single atoms is constructed through a facile self-assembly and photodeposition strategy. Due to the acceleration of exciton dissociation and regulation of local electron density of Pt single atoms along with the introduction of nitrogen defects, the optimized Pt-MCT-3 exhibits a hydrogen production rate of 172.0 µmol h-1 (λ ≥ 420 nm), ≈41 times higher than pristine CN. The apparent quantum yield for the hydrogen production is determined to be 27.1% at 420 nm. The experimental characterizations and theoretical calculations demonstrate that the nitrogen defects act as the electron traps for the exciton dissociation, resulting in a decrease of Eb from 86.92 to 43.20 meV. Simultaneously, the stronger interaction between neighboring nitrogen defects and Pt single atoms directionally drives free electrons to aggregate around Pt single atoms, and tailors the d-band electrons of Pt, forming a moderate binding strength between Pt atoms and H* intermediates.

Tailoring Second Coordination Sphere for Tunable Solid-Liquid Interfacial Charge Transfer toward Enhanced Photoelectrochemical H2 Production.

The recombination of photogenerated charge carriers severely limits the performance of photoelectrochemical (PEC) H2 production. Here, we demonstrate that this limitation can be overcome by optimizing the charge transfer dynamics at the solid-liquid interface via molecular catalyst design. Specifically, the surface of a p-Si photocathode is modulated using molecular catalysts with different metal atoms and organic ligands to improve H2 production performance. Co(pda-SO3H)2 is identified as an efficient and durable catalyst for H2 production through the rational design of metal centers and first/second coordination spheres. The modulation with Co(pda-SO3H)2, which contains an electron-withdrawing -SO3H group in the second coordination sphere, elevates the flat-band potential of the polished p-Si photocathode and nanoporous p-Si photocathode by 81 mV and 124 mV, respectively, leading to the maximized energy band bending and the minimized interfacial carrier transport resistance. Consequently, both the two photocathodes achieve the Faradaic efficiency of more than 95 % for H2 production, which is well maintained during 18 h and 21 h reaction, respectively. This work highlights that the band-edge engineering by molecular catalysts could be an important design consideration for semiconductor-catalyst hybrids toward PEC H2 production.

An Interface-cascading Silicon Photoanode with Strengthened Built-in Electric Field and Enriched Surface Oxygen Vacancies for Efficient Photoelectrochemical Water Splitting.

To promote interfacial charge transfer process and accelerate surface water oxidation reaction kinetics for photoelectrochemical (PEC) water splitting over n-type Silicon (n-Si) based photoanodes, herein, starting with surface stabilized n-Si/CoOx , a NiOx /NiFeOOH composite overlayer was coated by atomic layer deposition and spray coating to fabricate the multilayer structured n-Si/CoOx /NiOx /NiFeOOH photoanode. Encouragingly, the obtained n-Si/CoOx /NiOx /NiFeOOH photoanode exhibits much increased PEC activity for water splitting, with onset potential cathodically shifted to ~0.96 V vs. RHE and photocurrent density increased to 22.6 mA cm-2 at 1.23 V vs. RHE for OER, as compared to n-Si/CoOx , even significantly surpassing the counterpart n-Si/CoOx /NiOx /FeOOH and n-Si/CoOx /NiOx /NiOOH photoanodes. Photophysical and electrochemical characterizations evidence that the deposited CoOx /NiOx /NiFeOOH composite overlayer would create large band bending and strong built-in electric field at the introduced cascading interfaces, thereby producing a large photovoltage of 650 mV to efficiently accelerate charge transfer from the n-Si substrate to the electrolyte for water oxidation. Furthermore, the surface oxygen vacancy enriched NiFeOOH overlayer could effectively catalyze the water oxidation reaction by thermodynamically reducing the energy barrier of rate determining step for OER.

Surface Adsorbed Hydroxyl: A Double-Edged Sword in Electrochemical CO2 Reduction over Oxide-Derived Copper.

Oxide-derived Cu (OD-Cu) featured with surface located sub-20 nm nanoparticles (NPs) created via surface structure reconstruction was developed for electrochemical CO2 reduction (ECO2 RR). With surface adsorbed hydroxyls (OHad ) identified during ECO2 RR, it is realized that OHad , sterically confined and adsorbed at OD-Cu by surface located sub-20 nm NPs, should be determinative to the multi-carbon (C2 ) product selectivity. In situ spectral investigations and theoretical calculations reveal that OHad favors the adsorption of low-frequency *CO with weak C≡O bonds and strengthens the *CO binding at OD-Cu surface, promoting *CO dimerization and then selective C2 production. However, excessive OHad would inhibit selective C2 production by occupying active sites and facilitating competitive H2 evolution. In a flow cell, stable C2 production with high selectivity of ∼60 % at -200 mA cm-2 could be achieved over OD-Cu, with adsorption of OHad well steered in the fast flowing electrolyte.

Cultivation pattern affects starch structure and physicochemical properties of yam (Dioscorea persimilis).

Yam (Dioscorea spp.) is a major food source in many countries due to its tuber rich in starch (60 %-89 % of the dry weight) and various important micronutrients. Orientation Supergene Cultivation (OSC) pattern is a simple and efficient cultivation mode developed in China in recent years. However, little is known about its effect on yam tuber starch. In this study, the starchy tuber yield, starch structure and physicochemical properties were compared and analyzed in detail between OSC and Traditional Vertical Cultivation (TVC) with Dioscorea persimilis "zhugaoshu", a widely cultivated variety. The results proved that OSC significantly increased tuber yield (23.76 %-31.86 %) and commodity quality (more smooth skin) compared with TVC in three consecutive years of field experiments. Moreover, OSC increased amylopectin content, resistant starch content, granule average diameter and average degree of crystallinity by 2.7 %, 5.8 %, 14.7 % and 9.5 %, respectively, while OSC decreased starch molecular weight (Mw). These traits resulted in starch with lower thermal properties (To, Tp, Tc, ΔHgel), but higher pasting properties (PV, TV). Our results indicated that cultivation pattern affected the yam production and starch physicochemical properties. It would not only provide a practical basis for OSC promotion, but also provide valuable information on how to guide the yam starch end use in food and non-food industries.

Nitrogen substitution induced lattice contraction in nickel nanoparticles for electrochemical hydrogen evolution from simulated seawater.

Herein, we demonstrate a facile method for the introduction of nitrogen in the lattices of nickel nanoparticles to form NiNx (x = 0.13, 0.20, 0.27). X-ray absorption spectroscopy reveals the contraction of the Ni-Ni bond and modulated coordination environment after nitrogen introduction. The NiN0.20 required 87 mV overpotential for -10 mA cm-2 cathodic current density in simulated seawater. The density functional theory calculations revealed favorable EH2Oads and ΔGHads after N-introduction.

Decrypting the Controlled Product Selectivity over Ag-Cu Bimetallic Surface Alloys for Electrochemical CO2 Reduction.

Electrochemical CO2 reduction reaction (ECO2 RR) with controlled product selectivity is realized on Ag-Cu bimetallic surface alloys, with high selectivity towards C2 hydrocarbons/alcohols (≈60 % faradaic efficiency, FE), C1 hydrocarbons/alcohols (≈41 % FE) and CO (≈74 % FE) achieved by tuning surface compositions and applied potentials. In situ spectral investigations and theoretical calculations reveal that surface-composition-dependent d-band center could tune *CO binding strengths, regulating the *CO subsequent reaction pathways and then the product selectivity. Further adjusting the applied potentials will alter the energy of participated electrons, which leads to controlled ECO2 RR selectivity towards desired products. A predominant region map, with an indicator proposed to evaluate the thermodynamic predominance of the *CO subsequent reactions, is then provided as a reliable theoretical guidance for the controllable ECO2 RR product selectivity over bimetallic alloys.

Engineered Cobalt Single-Atoms@BiFeO3 Heteronanostructures for Highly Efficient Solar Water Oxidation.

Efficient charge-carrier separation and their utilization are the key factors in overcoming sluggish four-electron reaction kinetics involved in photocatalytic oxygen evolution. Here, a novel study demonstrates the significance of Na2 S2 O8 as a sacrificial agent in comparison to AgNO3 . Resultantly, BiFeO3 (BFO) and titanium doped-oxygen deficient BiFeO3 (Ti-BFO-R) nanostructures achieve ≈64 and 44.5 times higher O2 evolution in the presence of Na2 S2 O8 compared to AgNO3 as a sacrificial agent, respectively. Furthermore, the presence of Co single atoms (Co-SAs) deposited via immersion method on BFO and Ti-BFO-R nanostructures led to achieving outstanding O2 evolution at a rate of 16.11 and 23.89 mmol g-1 h-1 , respectively, which is 153 and 227.5 times higher compared to BFO (in the presence of AgNO3 ), the highest O2 evolution observed for BFO-based materials to date. The successful deposition of Co-SAs is confirmed by aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (AC HAADF-STEM) and X-ray absorption near-edge structure (XANES). The charge transfer investigations confirm the significance of Co-SAs on BFO-based photocatalysts for improved charge-carrier separation, transport, and utilization. This novel study validates the excellent role of Na2 S2 O8 as a sacrificial agent and Co-SAs as a cocatalyst for BFO-based nanostructures for efficient O2 evolution.

Ultrathin porous graphitic carbon nitride from recrystallized precursor toward significantly enhanced photocatalytic water splitting.

Structure regulation (including electronic structure and morphology) for graphitic carbon nitride (g-C3N4) is an effective way to promote the photocatalytic activity. Herein, an ultrathin porous g-C3N4 (BCN-HT100) was synthesized by calcination of biuret hydrate. Hydrothermal treatment induced biuret recrystallization to form biuret hydrate precursor with regular morphology and large crystal size, thus promoting the polymerization of melem to form g-C3N4 network. Accordingly, BCN-HT100 possessed ultrathin nanosheet structure, higher polymerization degree, larger surface area and more pores than biuret-derived g-C3N4. BCN-HT100 behaved high-efficiency photocatalytic H2-productin activity with an apparent quantum yield (AQY) of 58.7% at 405 nm due to the enhanced utilization efficiency for photo-generated charge carriers and abundant reactive sites. Furthermore, Pt-NiCo2O4 dual cocatalysts were employed on BCN-HT100 for achieving photocatalytic overall water splitting, and the AQY reached 4.9% at 405 nm. This work provides a meaningful reference to designing g-C3N4 to achieve efficient solar energy conversion into hydrogen.

Synergy of Ultrathin CoOx Overlayer and Nickel Single Atoms on Hematite Nanorods for Efficient Photo-Electrochemical Water Splitting.

To solve surface carrier recombination and sluggish water oxidation kinetics of hematite (α-Fe2 O3 ) photoanodes, herein, an attractive surface modification strategy is developed to successively deposit ultrathin CoOx overlayer and Ni single atoms on titanium (Ti)-doped α-Fe2 O3 (Ti:Fe2 O3 ) nanorods through a two-step atomic layer deposition (ALD) and photodeposition process. The collaborative decoration of ultrathin CoOx overlayer and Ni single atoms can trigger a big boost in photo-electrochemical (PEC) performance for water splitting over the obtained Ti:Fe2 O3 /CoOx /Ni photoanode, with the photocurrent density reaching 1.05 mA cm-2 at 1.23 V vs. reversible hydrogen electrode (RHE), more than three times that of Ti:Fe2 O3 (0.326 mA cm-2 ). Electrochemical and electronic investigations reveal that the surface passivation effect of ultrathin CoOx overlayer can reduce surface carrier recombination, while the catalysis effect of Ni single atoms can accelerate water oxidation kinetics. Moreover, theoretical calculations evidence that the synergy of ultrathin CoOx overlayer and Ni single atoms can lower the adsorption free energy of OH* intermediates and relieve the potential-determining step (PDS) for oxygen evolution reaction (OER). This work provides an exemplary modification through rational engineering of surface electrochemical and electronic properties for the improved PEC performances, which can be applied in other metal oxide semiconductors as well.

Boosting photocatalytic hydrogen production by creating isotype heterojunctions and single-atom active sites in highly-crystallized carbon nitride.

Carbon nitride-based photocatalysts hold an enormous potential in producing hydrogen. A strategy to simultaneously create isotype heterojunctions and active sites in highly-crystallized carbon nitride is anticipated to significantly boost the photocatalytic activity, but is yet to be realized. Herein, we find that cobalt salt added in the ionothermal synthesis can promote the phase transition of heptazine-based crystalline carbon nitride (CCN) to triazine-based poly(triazine imide) (PTI), rendering the creation of single-atom cobalt coordinated isotype CCN/PTI heterojunction. Co-CCN/PTI exhibits an appreciable apparent quantum yield of 20.88% at 425 nm for photocatalytic hydrogen production with a rate achieving 3538 µmol h-1 g-1 (λ > 420 nm), which is 4.8 times that of CCN and 27.6 times that of PTI. The high photocatalytic activity is attributed to the Type II isotype highly-crystallized CCN/PTI heterojunction for promoting charge carrier migration, and the single-atom Co sites for accelerating surface oxidation reaction.

Electron-Deficient Zn-N6 Configuration Enabling Polymeric Carbon Nitride for Visible-Light Photocatalytic Overall Water Splitting.

Despite of suitable band structures for harvesting solar light and driving water redox reactions, polymeric carbon nitride (PCN) has suffered from poor charge transfer ability and sluggish surface reaction kinetics, which limit its photocatalytic activity for water splitting. Herein, atomically dispersed Zn-coordinated three-dimensional (3D) sponge-like PCN (Zn-PCN) is synthesized through a novel intermediate coordination strategy. Advanced characterizations and theoretical calculations well evidence that Zn single atoms are coordinated and stabilized on PCN in the form of Zn-N6 configuration featured with an electron-deficient state. Such an electronic configuration has been demonstrated contributive to promoted electron excitation, accelerated charge separation and transfer as well as reduced water redox barriers. Further benefited from the abundant surface active sites derived from the 3D porous structure, Zn-PCN realizes visible-light photocatalysis for overall water splitting with H2 and O2 simultaneously evolved at a stoichiometric ratio of 2:1. This work brings new insights into the design of novel single-atom photocatalysts by deepening the understanding of electronic configurations and reactive sites favorable to excellent photocatalysis for water splitting and related solar energy conversion reactions.

Deciphering Ligand Controlled Structural Evolution of Prussian Blue Analogues and Their Electrochemical Activation during Alkaline Water Oxidation.

Herein, we have demonstrated the control over the structure of precatalysts to tune the properties of the active catalysts and their water oxidation activity. The reaction of K3 [Fe(CN)6 ] and Na2 [Fe(CN)5 (NO)] with Co(OH)2 @CC produced precatalysts PC-1 and PC-2, respectively, with distinct structural and electronic features. The replacement of the -CN group with strong π-acceptor -NO modulates the electronic and atomic structure of PC-2. As a result, a facile electrochemical transformation of PC-2 into active catalyst Fe-Co(OH)2 -Co(O)OH (AC-2) has been attained only in 15 CV cycles while 600 CV cycles are required for the electrochemical activation of PC-1 into AC-1. The X-ray absorption studies reveal the contraction of the Co-O and Fe-O bond in AC-2 because of the presence of a higher amount of Co3+ and Fe3+ than in AC-1. The high valent Co3+ and Fe3+ modulates the electronic properties of AC-2 and assists in the O-O bond formation, leading to the improved water oxidation activity.

Atomically Dispersed Janus Nickel Sites on Red Phosphorus for Photocatalytic Overall Water Splitting.

Single-atom nickel catalysts hold great promise for photocatalytic water splitting due to their plentiful active sites and cost-effectiveness. Herein, we adopt a reactive-group guided strategy to prepare atomically dispersed nickel catalysts on red phosphorus. The hydrothermal treatment of red phosphorus leads to the formation of P-H and P-OH groups, which behave as the reactive functionalities to generate the dual structure of single-atom P-Ni and P-O-Ni catalytic sites. The produced single-atom sites provide two different functions: P-Ni for water reduction and P-O-Ni for water oxidation. Benefitting from this specific Janus structure, Ni-red phosphorus shows an elevated hydrogen evolution rate compared to Ni nanoparticle-modified red phosphorus under visible-light irradiation. The hydrogen evolution rate was additionally enhanced with increased reaction temperature, reaching 91.51 µmol h-1 at 70 °C, corresponding to an apparent quantum efficiency of 8.9 % at 420 nm excitation wavelength.

A Semiconductor-Mediator-Catalyst Artificial Photosynthetic System for Photoelectrochemical Water Oxidation.

In fabricating an artificial photosynthesis (AP) electrode for water oxidation, we have devised a semiconductor-mediator-catalyst structure that mimics photosystem II (PSII). It is based on a surface layer of vertically grown nanorods of Fe2 O3 on fluorine doped tin oxide (FTO) electrodes with a carbazole mediator base and a Ru(II) carbene complex on a nanolayer of TiO2 as a water oxidation co-catalyst. The resulting hybrid assembly, FTO|Fe2 O3 |-carbazole|TiO2 |-Ru(carbene), demonstrates an enhanced photoelectrochemical (PEC) water oxidation performance compared to an electrode without the added carbaozle base with an increase in photocurrent density of 2.2-fold at 0.95 V vs. NHE and a negatively shifted onset potential of 500 mV. The enhanced PEC performance is attributable to carbazole mediator accelerated interfacial hole transfer from Fe2 O3 to the Ru(II) carbene co-catalyst, with an improved effective surface area for the water oxidation reaction and reduced charge transfer resistance.

Instability Issues and Stabilization Strategies of Lead Halide Perovskites for Photo(electro)catalytic Solar Fuel Production.

Photo(electro)catalysis is a promising route to utilizing solar energy to produce valuable chemical fuels. In recent years, lead halide perovskites (LHPs) as a class of high-performance semiconductor materials have been extensively used in photo(electro)catalytic solar fuel production because of their excellent photophysical properties. However, instability issues make it arduous for LHPs to achieve their full potential in photo(electro)catalysis. This Perspective discusses the instability issues and summarizes the stabilization strategies employed for prolonging the stability or durability of LHPs in photo(electro)catalytic solar fuel production. The strategies for particulate photocatalytic systems (including composition engineering, surface passivation, core-shell structures construction, and solvent selection) and for thin-film PEC systems (including physical protective coating, A site cation additive, and surface/interface passivation) are introduced. Finally, some challenges and opportunities regarding the development of stable and efficient LHPs for photo(electro)catalysis are proposed.

Highly Efficient and Chemoselective Hydrogenation of Nitro Compounds into Amines by Nitrogen-Doped Porous Carbon-Supported Co/Ni Bimetallic Nanoparticles.

A novel Co/Ni bimetallic nanoparticle supported by nitrogen-doped porous carbon (NPC), Co5/Ni@NPC-700, exhibits high conversion, chemoselectivity, and recyclability in the hydrogenation of 16 different nitro compounds into desired amines with hydrazine hydrate under mild conditions. The synergistic effects of Co/Ni bimetal nanoparticles and the NPC-supported porous honeycomb structure with more accessible active sites may be responsible for the high catalytic hydrogenation performance.