RESUMEN
The potential applications of cellulose nanofibril-based foam materials can be expanded by their enhanced water durability. This study proposes two crosslinking methods to improve the water durability of the oven-dried carboxymethylated cellulose nanofibril (CMCNF) foam. The first method involves the addition of a crosslinker, polyamideamine epichlorohydrin. The second method is the self-crosslinking of CMCNFs via heat treatment at 140 °C for less than an hour, which is a simple way to crosslink CMCNF-based materials. Both crosslinking methods resulted in excellent water durability and wet resilience of the foams, which also exhibited high water absorbency. Furthermore, neither method affected the structural nor mechanical properties of the oven-dried CMCNF foams. In particular, self-crosslinking by heat treatment proved to be as effective as using a crosslinking agent. Compared to the freeze-dried foam, the oven-dried foam exhibited slower methylene blue (MB) dye adsorption but a higher maximum adsorption capacity (238-250 mg/g), attributed to the closed pore structure and a larger specific surface area. In addition, the isotherm and reusability of the foam for MB adsorption were investigated. These crosslinking processes expanded the potential use of oven-dried CMCNF foams as adsorbents for cationic dyes.
Asunto(s)
Celulosa , Colorantes , Reactivos de Enlaces Cruzados , Azul de Metileno , Nanofibras , Agua , Nanofibras/química , Adsorción , Agua/química , Celulosa/química , Celulosa/análogos & derivados , Colorantes/química , Azul de Metileno/química , Reactivos de Enlaces Cruzados/química , Contaminantes Químicos del Agua/química , Purificación del Agua/métodos , Epiclorhidrina/químicaRESUMEN
This study prepared a waterproof cellulose nanofibril (CNF) sheet via the deposition of an alkyl ketene dimer (AKD) on the sheet's controlled porous structure. The porosity of the CNF sheet was controlled by drying under different conditions, which included hot-press drying (HD) and solvent-exchange drying (SD), and the effect on the hydrophobization and water-related barrier performance of the sheet were investigated. When the SD sheet was immersed in an AKD wax solution, the sheet exhibited super-hydrophobicity and a lower water vapor transmission rate, compared with the HD sheet. This indicated that the porous structure of the SD sheet enabled AKD to be adsorbed on both the surface and the inner surface and it filled in the pores of the sheet, thereby giving rise to excellent waterproofing properties. The performance of a hydrophobized SD sheet as a water barrier material was comparable to a linear low-density polyethylene film. This study confirms the possibility for AKD wax to be immersed in a porous CNF sheet and used as a potential barrier material in hydrogel packaging.
RESUMEN
A comprehensive picture of structural changes of cellulosic biomass during enzymatic hydrolysis is essential for a better understanding of enzymatic actions and development of more efficient enzymes. In this study, a suite of analytical techniques including sum frequency generation (SFG) spectroscopy, infrared (IR) spectroscopy, x-ray diffraction (XRD), and x-ray photoelectron spectroscopy (XPS) were employed for lignin-free model biomass samples--Avicel, bleached softwood, and bacterial cellulose--to find correlations between the decrease in hydrolysis rate over time and the structural or chemical changes of biomass during the hydrolysis reaction. The results showed that the decrease in hydrolysis rate over time appears to correlate with the irreversible deposition of non-cellulosic species (either reaction side products or denatured enzymes, or both) on the cellulosic substrate surface. The crystallinity, degree of polymerization, and meso-scale packing of cellulose do not seem to positively correlate with the decrease in hydrolysis rate observed for all three substrates tested in this study. It was also found that the cellulose Iα component of the bacterial cellulose is preferentially hydrolyzed by the enzyme than the cellulose Iß component.
Asunto(s)
Celulasa/química , Celulosa/química , Endo-1,4-beta Xilanasas/química , Madera/química , beta-Glucosidasa/química , Activación Enzimática , Hidrólisis , Cinética , Ensayo de Materiales , Conformación MolecularRESUMEN
The non-centrosymmetry requirement of sum frequency generation (SFG) vibration spectroscopy allows the detection and quantification of crystalline cellulose in lignocellulose biomass without spectral interferences from hemicelluloses and lignin. This paper shows a correlation between the amount of crystalline cellulose in biomass and the SFG signal intensity. Model biomass samples were prepared by mixing commercially available cellulose, xylan, and lignin to defined concentrations. The SFG signal intensity was found sensitive to a wide range of crystallinity, but varied non-linearly with the mass fraction of cellulose in the samples. This might be due to the matrix effects such as light scattering and absorption by xylan and lignin, as well as the non-linear density dependence of the SFG process itself. Comparison with other techniques such as XRD, FT-Raman, FT-IR and NMR demonstrate that SFG can be a complementary and sensitive tool to assess crystalline cellulose in biomass.