RESUMEN
The search for alternative ways to give a second life to materials paved the way for detailed investigation into three silica-polyethylenimine (Si-PEI) materials for the purpose of CO2 adsorption in carbon capture and storage. A solvent extraction procedure was investigated to recover degraded PEIs and silica, and concomitantly, pyrolysis was evaluated to obtain valuable chemicals such as alkylated pyrazines. An array of thermal (TGA, Py-GC-MS), mechanical (rheology), and spectroscopical (ATR-FTIR, 1H-13C-NMR) methods were applied to PEIs extracted with methanol to determine the relevant physico-chemical features of these polymers when subjected to degradation after use in CO2 capture. Proxies of degradation associated with the plausible formation of urea/carbamate moieties were revealed by Py-GC-MS, NMR, and ATR-FTIR. The yield of alkylpyrazines estimated by Py-GC-MS highlighted the potential of exhausted PEIs as possibly valuable materials in other applications.
Asunto(s)
Polietileneimina , Dióxido de Silicio , Dióxido de Silicio/química , Polietileneimina/química , Dióxido de Carbono/química , Espectroscopía de Resonancia Magnética , AdsorciónRESUMEN
Grasslands (natural, semi-natural and improved) occupy approximately one-third of the terrestrial biosphere and are key for global ecosystem service provision, storing up to 30% of soil organic carbon (SOC). To date, most research on soil carbon (C) sequestration has focused on croplands where the levels of native soil organic matter (SOM) are typically low and significant potential exists to replenish SOM stocks. However, with the renewed push to achieve "net zero" C emissions by 2050, grasslands may offer an additional C store, utilising tools such as biochar. Here, we critically evaluate the potential for biochar as a technology for increasing grassland C stocks, identifying a number of practical, economic, social and legislative challenges that need to be addressed before the widescale adoption of biochar may be achieved. We critically assess the current knowledge within the field of grassland biochar research in the context of ecosystem service provision and provide opinions on the applicability of biochar as an amendment to different types of grassland (improved, semi-improved and unimproved) and the potential effect on ecosystem provision using a range of application techniques in the topsoil and subsoil. We concluded that the key question remains, is it possible for managed grasslands to store more C, without causing a loss in additional ecosystem services? To address this question future research must take a more multidisciplinary and holistic approach when evaluating the potential role of biochar at sequestering C in grasslands to mitigate climate change. Supplementary Information: The online version contains supplementary material available at 10.1007/s42773-023-00232-y.
RESUMEN
Carbonaceous deposits are ubiquitous, being formed on surfaces in engines, fuel systems and on catalysts operating at high temperatures for hydrocarbon transformations. In internal combustion engines, their formation negatively affects worldwide vehicle emissions and fuel economy, leading to premature deaths and environmental damage. Deposit composition and formation pathways are poorly understood due to their insolubility and the intrinsic complexity of their layered carbonaceous matrix. Here, we apply the in situ high mass resolving power capabilities of 3D Orbitrap secondary ion mass spectrometry (3D OrbiSIMS) argon cluster depth profiling on 16 lab grown deposits and evidence common molecular distributions in deposit depth and in positions relative to the combustion chamber. We observe the products of the growth of both planar and curved polycyclic aromatic hydrocarbons to form small fullerenes over time in the engine and propose possible formation pathways which explain the molecular distributions observed. These include alkyl scission, cyclisation of aliphatic side chains and hydrogen abstraction C2H2 addition to form larger aromatic structures. We apply this pathway to previously unidentified nitrogen containing structures in deposits including quinolines and carbazoles. For the first time, 3D OrbiSIMS results were compared and validated with data from atmospheric pressure matrix assisted laser desorption ionization MS. The comprehensive characterization provided will help the development of a new generation of chemical additives to reduce deposits, and thus improve vehicle emissions and global air quality.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Hidrocarburos Policíclicos Aromáticos , Contaminantes Atmosféricos/análisis , Contaminación del Aire/análisis , Hidrocarburos/análisis , Hidrocarburos Policíclicos Aromáticos/análisis , Emisiones de Vehículos/análisisRESUMEN
The chemical evidence that IQOS emissions fit the definition of both an aerosol and smoke, and that IQOS and potentially other heated tobacco products (HTPs) pose some harmful health threats from the range of compounds released even at somewhat lower concentrations is reviewed. Further, we address the yields of harmful and potentially harmful compounds (HPHCs), including polycyclic aromatic hydrocarbons (PAHs), and the constituents of IQOS emission that are diagnostic of pyrolysis to provide information on the temperatures reached in IQOS tobacco sticks. The HPHCs present in IQOS emissions are the same as in conventional cigarette smoke (CCs), analogous to emissions from earlier generation of HTPs classed as smoke. However, Philip Morris International (PMI) studies have to some degree underestimated IQOS aerosol HPHC yields, which are a factor of between 3.2 and 3.6 higher when expressed on a tobacco rather than an IQOS stick basis compared to the reference 3R4F cigarette. Further, IQOS emissions contain carbon particles, which fit definition of both aerosol and smoke. Continual reheating of deposited tar in the IQOS device will occur with real-life use, likely leading to generation of even higher concentrations of HPHCs and particulate matter. Despite IQOS not exceeding 350 °C, local hot spots could exist, causing formation of species (phenol/cresols, PAHs). It is recommended that the impact of repeated use to determine the levels of black carbon (insoluble organic matter) in the particulate matter, and the extent to which compounds in IQOS emissions are formed by pyrolysis need to be assessed rigorously. To address whether uneven temperature profiles in heat sticks can lead to potential hot spots that could, for example, lead to PAH formation, it is recommended that pyrolysis studies on tobacco and other constituents of HTPs are required in conjunction with more effort on heating tobacco blends under controlled temperature/time conditions.
RESUMEN
Modern mass spectrometry techniques produce a wealth of spectral data, and although this is an advantage in terms of the richness of the information available, the volume and complexity of data can prevent a thorough interpretation to reach useful conclusions. Application of molecular formula prediction (MFP) to produce annotated lists of ions that have been filtered by their elemental composition and considering structural double bond equivalence are widely used on high resolving power mass spectrometry datasets. However, this has not been applied to secondary ion mass spectrometry data. Here, we apply this data interpretation approach to 3D OrbiSIMS datasets, testing it for a series of increasingly complex samples. In an organic on inorganic sample, we successfully annotated the organic contaminant overlayer separately from the substrate. In a more challenging purely organic human serum sample we filtered out both proteins and lipids based on elemental compositions, 226 different lipids were identified and validated using existing databases, and we assigned amino acid sequences of abundant serum proteins including albumin, fibronectin, and transferrin. Finally, we tested the approach on depth profile data from layered carbonaceous engine deposits and annotated previously unidentified lubricating oil species. Application of an unsupervised machine learning method on filtered ions after performing MFP from this sample uniquely separated depth profiles of species, which were not observed when performing the method on the entire dataset. Overall, the chemical filtering approach using MFP has great potential in enabling full interpretation of complex 3D OrbiSIMS datasets from a plethora of material types.
Asunto(s)
Lípidos , Espectrometría de Masa de Ion Secundario , Bases de Datos Factuales , Humanos , Iones/químicaRESUMEN
Internal combustion engines are used heavily in diverse applications worldwide. Achieving the most efficient operation is key to improving air quality as society moves to a decarbonized energy system. Insoluble deposits that form within internal combustion engine components including fuel injectors and filters negatively impact CO2 and pollutant emissions. Understanding the composition, origins, and formation mechanisms of these complex materials will be key to their mitigation however, previous attempts only afforded nondiagnostic chemical assignments and limited knowledge toward this. Here, we uncover the identity and spatial distribution of molecular species from a gasoline direct injector, diesel injector, and filter deposit in situ using a new hyphenation of secondary ion mass spectrometry and the state-of-the-art Orbitrap mass analyzer (3D OrbiSIMS) and elemental analysis. Through a high mass resolving power and tandem MS we unambiguously uncovered the identity, distribution, and origin of species including alkylbenzyl sulfonates and provide evidence of deposit formation mechanisms including formation of longer chain sulfonates at the gasoline deposit's surface as well as aromatization to form polycyclic aromatic hydrocarbons up to C66H20, which were prevalent in the lower depth of this deposit. Inorganic salts contributed significantly to the diesel injector deposit throughout its depth, suggesting contamination over multiple fueling cycles. Findings will enable several strategies to mitigate these insoluble materials such as implementing stricter worldwide fuel specifications, modifying additives with adverse reactivity, and synthesizing new fuel additives to solubilize deposits in the engine, thereby leading to less polluting vehicles.
RESUMEN
Exploration for shale gas occurs in onshore basins, with two approaches used to predict the maximum gas in place (GIP) in the absence of production data. The first estimates adsorbed plus free gas held within pore space, and the second measures gas yields from laboratory pyrolysis experiments on core samples. Here we show the use of sequential high-pressure water pyrolysis (HPWP) to replicate petroleum generation and expulsion in uplifted onshore basins. Compared to anhydrous pyrolysis where oil expulsion is limited, gas yields are much lower, and the gas at high maturity is dry, consistent with actual shales. Gas yields from HPWP of UK Bowland Shales are comparable with those from degassed cores, with the ca. 1% porosity sufficient to accommodate the gas generated. Extrapolating our findings to the whole Bowland Shale, the maximum GIP equate to potentially economically recoverable reserves of less than 10 years of current UK gas consumption.
RESUMEN
We investigated a range of different mesoporous NiO electrodes prepared by different research groups and private firms in Europe to determine the parameters which influence good quality photoelectrochemical devices. This benchmarking study aims to solve some of the discrepancies in the literature regarding the performance of p-DSCs due to differences in the quality of the device fabrication. The information obtained will lay the foundation for future photocatalytic systems based on sensitized NiO so that new dyes and catalysts can be tested with a standardized material. The textural and electrochemical properties of the semiconducting material are key to the performance of photocathodes. We found that both commercial and non-commercial NiO gave promising solar cell and water-splitting devices. The NiO samples which had the two highest solar cell efficiency (0.145% and 0.089%) also gave the best overall theoretical H2 conversion.
RESUMEN
Mg Ni mixed metal oxide photocathodes have been prepared by a mixed NiCl2/MgCl2 sol-gel process. The MgO/NiO electrodes have been extensively characterized using physical and electrochemical methods. Dye-sensitized solar cells have been prepared from these films, and the higher concentrations of MgO improved the photovoltage of these devices; however, there was a notable drop in photocurrent with increasing Mg(2+). Charge extraction and XPS experiments revealed that the cause of this was a positive shift in the energy of the valence band, which decreased the driving force for electron transfer from the NiO film to the dye and, therefore, the photocurrent. In addition, increasing concentrations of MgO increases the volume of pores between 0.500 and 0.050 µm, while reducing pore volumes in the mesopore range (less than 0.050 µm) and lowering BET surface area from approximately 41 down to 30 m(2) g(-1). A MgO concentration of 5% was found to strike a balance between the increased photovoltage and decreased photocurrent, possessing a BET surface area of 35 m(2) g(-1) and a large pore volume in both the meso- and macropore range, which lead to a higher overall power conversion efficiency than NiO alone.
RESUMEN
The major organic component in carbonaceous meteorites is an organic macromolecular material. The Murchison macromolecular material comprises aromatic units connected by aliphatic and heteroatom-containing linkages or occluded within the wider structure. The macromolecular material source environment remains elusive. Traditionally, attempts to determine source have strived to identify a single environment. Here, we apply a highly efficient hydrogenolysis method to liberate units from the macromolecular material and use mass spectrometric techniques to determine their chemical structures and individual stable carbon isotope ratios. We confirm that the macromolecular material comprises a labile fraction with small aromatic units enriched in (13)C and a refractory fraction made up of large aromatic units depleted in (13)C. Our findings suggest that the macromolecular material may be derived from at least two separate environments. Compound-specific carbon isotope trends for aromatic compounds with carbon number may reflect mixing of the two sources. The story of the quantitatively dominant macromolecular material in meteorites appears to be made up of more than one chapter.
Asunto(s)
Hidrocarburos Aromáticos/química , Sustancias Macromoleculares/química , Meteoroides , Isótopos de Carbono/química , Cromatografía de Gases y Espectrometría de MasasRESUMEN
The effect of biochar addition on the levels of black carbon (BC) and polcyclic aromatic hydrocarbons (PAHs) in a vineyard soil in central Italy was investigated within a two year period. Hydropyrolysis (HyPy) was used to determine the contents of BC (BCHyPy) in the amended and control soils, while the hydrocarbon composition of the semi-labile (non-BCHyPy) fraction released by HyPy was determined by gas chromatography-mass spectrometry, together with the solvent-extractable PAHs. The concentrations of these three polycyclic aromatic carbon reservoirs changed and impacted differently the soil organic carbon over the period of the trial. The addition of biochar (33 ton dry biochar ha(-1)) gave rise to a sharp increase in soil organic carbon, which could be accounted for by an increase in BCHyPy. Over time, the concentration of BCHyPy decreased significantly from 36 to 23 mg g(-1) and as a carbon percentage from 79% to 61%. No clear time trends were observed for the non-BCHyPy PAHs varying from 39 to 34 µg g(-1) in treated soils, not significantly different from control soils. However, the concentrations of extractable PAHs increased markedly in the amended soils and decreased with time from 153 to 78 ng g(-1) remaining always higher than those in untreated soil. The extent of the BCHyPy loss was more compatible with physical rather than chemical processes.
Asunto(s)
Carbono/análisis , Carbón Orgánico , Hidrocarburos Policíclicos Aromáticos/análisis , Contaminantes del Suelo/análisis , Suelo/química , Agricultura , Italia , Hollín/análisis , Hollín/químicaRESUMEN
To impact carbon emissions, new materials for carbon capture must be inexpensive, robust, and able to adsorb CO2 specifically from a mixture of other gases. In particular, materials must be tolerant to the water vapor and to the acidic impurities that are present in gas streams produced by using fossil fuels to generate electricity. We show that a porous organic polymer has excellent CO2 capacity and high CO2 selectivity under conditions relevant to precombustion CO2 capture. Unlike polar adsorbents, such as zeolite 13x and the metal-organic framework, HKUST-1, the CO2 adsorption capacity for the hydrophobic polymer is hardly affected by the adsorption of water vapor. The polymer is even stable to boiling in concentrated acid for extended periods, a property that is matched by few microporous adsorbents. The polymer adsorbs CO2 in a different way from rigid materials by physical swelling, much as a sponge adsorbs water. This gives rise to a higher CO2 capacities and much better CO2 selectivity than for other water-tolerant, nonswellable frameworks, such as activated carbon and ZIF-8. The polymer has superior function as a selective gas adsorbent, even though its constituent monomers are very simple organic feedstocks, as would be required for materials preparation on the large industrial scales required for carbon capture.
RESUMEN
Alcohol-containing polymer networks synthesized by Friedel-Crafts alkylation have surface areas of up to 1015 m(2)/g. Both racemic and chiral microporous binaphthol (BINOL) networks can be produced by a simple, one-step route. The BINOL networks show higher CO(2) capture capacities than their naphthol counterparts under idealized, dry conditions. In the presence of water vapor, however, these BINOL networks adsorb less CO(2) than more hydrophobic analogues, suggesting that idealized measurements may give a poor indication of performance under more realistic carbon capture conditions.
RESUMEN
Compound-specific stable carbon isotope analysis by gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS) is an important method for the determination of the (13)C/(12)C ratios of biomolecules such as steroids, for a wide range of applications. However, steroids in their natural form exhibit poor chromatographic resolution, while derivatisation adds carbon thereby corrupting the stable isotopic composition. Hydropyrolysis with a sulphided molybdenum catalyst has been shown to defunctionalise the steroids, while leaving their carbon skeleton intact, allowing for the accurate measurement of carbon isotope ratios. The presence of double bonds in unsaturated steroids such as cholesterol resulted in significant rearrangement of the products, but replacing the original catalyst system with one of platinum results in higher conversions and far greater selectivity. The improved chromatographic performance of the products should allow GC/C/IRMS to be applied to more structurally complex steroid hormones and their metabolites.
Asunto(s)
Isótopos de Carbono/química , Cromatografía de Gases y Espectrometría de Masas/métodos , Platino (Metal)/química , Esteroides/química , Catálisis , Calor , Marcaje Isotópico , Molibdeno/químicaRESUMEN
Gas chromatography/mass spectrometry (GC/MS) is the preferred technique for the detection of urinary steroid androgens for drug testing in athletics. Excreted in either the glucuronide or sulfated conjugated form, steroids must first undergo deconjugation followed by derivatisation to render them suitable for GC analysis. Discussed herein are the deconjugation and the derivatisation preparative options. The analytical challenges surrounding these preparatory approaches, in particular the inability to cleave the sulfate moiety have led to a focus on testing protocols that reply on glucuronide conjugates. Other approaches which alleviate the need for deconjugation and derivatisation are also highlighted.
Asunto(s)
Andrógenos/análisis , Esteroides/análisis , Andrógenos/síntesis química , Andrógenos/metabolismo , Cromatografía Líquida de Alta Presión , Doping en los Deportes , Cromatografía de Gases y Espectrometría de Masas , Glucurónidos/análisis , Humanos , Masculino , Espectrometría de Masas , Estructura Molecular , Esteroides/síntesis química , Esteroides/metabolismo , Detección de Abuso de Sustancias , Sulfatos/análisisRESUMEN
The Neoproterozoic era (1,000-542 Myr ago) was an era of climatic extremes and biological evolutionary developments culminating in the emergence of animals (Metazoa) and new ecosystems. Here we show that abundant sedimentary 24-isopropylcholestanes, the hydrocarbon remains of C(30) sterols produced by marine demosponges, record the presence of Metazoa in the geological record before the end of the Marinoan glaciation ( approximately 635 Myr ago). These sterane biomarkers are abundant in all formations of the Huqf Supergroup, South Oman Salt Basin, and, based on a new high-precision geochronology, constitute a continuous 100-Myr-long chemical fossil record of demosponges through the terminal Neoproterozoic and into the Early Cambrian epoch. The demosponge steranes occur in strata that underlie the Marinoan cap carbonate (>635 Myr ago). They currently represent the oldest evidence for animals in the fossil record, and are evidence for animals pre-dating the termination of the Marinoan glaciation. This suggests that shallow shelf waters in some late Cryogenian ocean basins (>635 Myr ago) contained dissolved oxygen in concentrations sufficient to support basal metazoan life at least 100 Myr before the rapid diversification of bilaterians during the Cambrian explosion. Biomarker analysis has yet to reveal any convincing evidence for ancient sponges pre-dating the first globally extensive Neoproterozoic glacial episode (the Sturtian, approximately 713 Myr ago in Oman).
Asunto(s)
Evolución Biológica , Colestanos/análisis , Colestanos/química , Fósiles , Sedimentos Geológicos/química , Poríferos/fisiología , Animales , Arabia , Biomarcadores/análisis , Biomarcadores/química , Colestanos/aislamiento & purificación , Cromatografía de Gases y Espectrometría de Masas , Historia Antigua , Hidrocarburos/análisis , Hidrocarburos/química , Cubierta de Hielo , Océanos y Mares , Oxígeno/análisis , Agua de Mar/químicaRESUMEN
An introduction to conjugated steroids and the justification for their analysis is provided covering both environmental and biological samples. Determining conjugated steroids or indeed any organic chemical which is conjugated upon excretion from the body has relevance in diagnostic monitoring, forensic screening and environmental analysis (from the endocrine disrupter perspective). The various analytical approaches and the accompanying issues are application-dependent. There are numerous options at each stage of analysis, from extraction, hydrolysis, derivatisation, and detection, and advances can be confined to the specific application for which it was developed. Emphasis is placed on the choice of separation and how gas or liquid chromatography necessitates different preparative stages to enable conjugated steroid determination. Possible future directions and research for conjugated steroid analysis are discussed.
Asunto(s)
Técnicas de Química Analítica/métodos , Esteroides/análisis , Cromatografía Liquida , Cromatografía de Gases y Espectrometría de Masas , Humanos , Estructura Molecular , Sensibilidad y Especificidad , Extracción en Fase Sólida , Esteroides/síntesis química , Esteroides/metabolismoRESUMEN
The biological stabilization process of cattle and poultry manure was studied using thermogravimetric analysis and (13)C nuclear magnetic resonance. The stabilization processes carried out were composting, anaerobic digestion and a mixed process (partly aerobic, partly anaerobic). It was observed from the analyzed samples that the biological stabilization processes reduce the volatile content of the bio-wastes and increase the degree of aromaticity. The stabilization of cattle manure by means of aerobic processes was able to further oxidize and enriched in aromatic compounds the bio-waste when compared with the digestion process. On the other hand, the stabilization of poultry manure resulted in a greater aromatization under the digestion process. Stabilized samples with a high degree of aromaticity presented a lower volatile content accompanied by a reduction in the intensity of the differential thermogravimetry peak registered under an inert atmosphere, indicative of the thermal decomposition of the organic matter. The thermal decomposition of all the analyzed materials (fresh and stabilized samples) commenced at around 200 degrees C but for the digested poultry manure, which decomposition initiated close to 250 degrees C. All stabilized samples yielded a lower degree of volatilization to that one observed in fresh samples.
Asunto(s)
Bovinos , Heces , Espectroscopía de Resonancia Magnética/métodos , Aves de Corral , Eliminación de Residuos/métodos , Termogravimetría/métodos , Anaerobiosis , Animales , Concentración de Iones de HidrógenoRESUMEN
Studies of biological molecules such as fatty acids and the steroid hormones have the potential to benefit enormously from stable carbon isotope ratio measurements of individual molecules. In their natural form, however, the body's molecules interact too readily with laboratory equipment designed to separate them for accurate measurements to be made. Some methods overcome this problem by adding carbon to the target molecule, but this can irreversibly overprint the carbon source 'signal'. Hydropyrolysis is a newly-applied catalytic technique that delicately strips molecules of their functional groups but retains their carbon skeletons and stereochemistries intact, allowing precise determination of the carbon source. By solving analytical problems, the new technique is increasing the ability of scientists to pinpoint molecular indicators of disease, elucidate metabolic pathways and recognise administered substances in forensic investigations.