Unconventional hcp/fcc Nickel Heteronanocrystal with Asymmetric Convex Sites Boosts Hydrogen Oxidation.

Developing non-platinum group metal catalysts for the sluggish hydrogen oxidation reaction (HOR) is critical for alkaline fuel cells. To date, Ni-based materials are the most promising candidates but still suffer from insufficient performance. Herein, we report an unconventional hcp/fcc Ni (u-hcp/fcc Ni) heteronanocrystal with multiple epitaxial hcp/fcc heterointerfaces and coherent twin boundaries, generating rugged surfaces with plenty of asymmetric convex sites. Systematic analyses discover that such convex sites enable the adsorption of *H in unusual bridge positions with weakened binding energy, circumventing the over-strong *H adsorption on traditional hollow positions, and simultaneously stabilizing interfacial *H2O. It thus synergistically optimizes the HOR thermodynamic process as well as reduces the kinetic barrier of the rate-determining Volmer step. Consequently, the developed u-hcp/fcc Ni exhibits the top-rank alkaline HOR activity with a mass activity of 40.6 mA mgNi-1 (6.3 times higher than fcc Ni control) together with superior stability and high CO-tolerance. These results provide a paradigm for designing high-performance catalysts by shifting the adsorption state of intermediates through configuring surface sites.

Molybdenum-Doped Cobalt-Free Cathode Realizing the Electrochemical Stability by Enhanced Covalent Bonding.

The doping strategy effectively enhances the capacity and cycling stability of cobalt-free nickel-rich cathodes. Understanding the intrinsic contributions of dopants is of great importance to optimize the performances of cathodes. This study investigates the correlation between the structure modification and their performances of Mo-doped LiNi0.8Mn0.2O2 (NM82) cathode. The role of doped Mo's valence state has been proved functional in both lattice structural modification and electronic state adjustment. Although the high-valence of Mo at the cathode surface inevitably reduces Ni valence for electronic neutrality and thus causes ion mixing, the original Mo valence will influence its diffusion depth. Structural analyses reveal Mo doping leads to a mixed layer on the surface, where high-valence Mo forms a slender cation mixing layer, enhancing structural stability and Li-ion transport. In addition, it is found that the high-valence dopant of Mo6+ ions partially occupies the unfilled 4d orbitals, which may strengthen the Mo─O bond through increased covalency and therefore reduce the oxygen mobility. This results in an impressive capacity retention (90.0% after 200 cycles) for Mo-NM82 cathodes with a high Mo valence state. These findings underscore the valence effect of doping on layered oxide cathode performance, offering guidance for next-generation cathode development.

Defective TiOx overlayers catalyze propane dehydrogenation promoted by base metals.

The industrial catalysts utilized for propane dehydrogenation (PDH) to propylene, an important alternative to petroleum-based cracking processes, either use expensive metals or metal oxides that are environmentally unbenign. We report that a typically less-active oxide, titanium oxide (TiO2), can be combined with earth-abundant metallic nickel (Ni) to form an unconventional Ni@TiOx catalyst for efficient PDH. The catalyst demonstrates a 94% propylene selectivity at 40% propane conversion and superior stability under industrially relevant conditions. Complete encapsulation of Ni nanoparticles was allowed at elevated temperatures (>550°C). A mechanistic study suggested that the defective TiOx overlayer consisting of tetracoordinated Ti sites with oxygen vacancies is catalytically active. Subsurface metallic Ni acts as an electronic promoter to accelerate carbon-hydrogen bond activation and hydrogen (H2) desorption on the TiOx overlayer.

Chiral Twist Interface Modulation Enhances Thermoelectric Properties of Tellurium Crystal.

Manipulating the grain boundary and chiral structure of enantiomorphic inorganic thermoelectric materials facilitates a new degree of freedom for enhancing thermoelectric energy conversion. Chiral twist mechanisms evolve by the screw dislocation phenomenon in the nanostructures; however, contributions of such chiral transport have been neglected for bulk crystals. Tellurium (Te) has a chiral trigonal crystal structure, high band degeneracy, and lattice anharmonicity for high thermoelectric performance. Here, Sb-doped Te crystals are grown to minimize the severe grain boundary effects on carrier transport and investigate the interface of chiral Te matrix and embedded achiral Sb2Te3 precipitates, which induce unusual lattice twists. The low grain boundary scattering and conformational grain restructuring provide electrical-favorable semicoherent interfaces. This maintains high electrical conductivity leading to a twofold increase in power factor compared to polycrystal samples. The embedded Sb2Te3 precipitates concurrently enable moderate phonon scattering leading to a remarkable decrease in lattice thermal conductivity and a high dimensionless figure of merit (zT) of 1.1 at 623 K. The crystal growth and chiral atomic reorientation unravel the emerging benefits of interface engineering as a crucial contributor to effectively enhancing carrier transport and minimizing phonon propagation in thermoelectric materials.

The role of ultraviolet radiation in the flavor formation during drying processing of Pacific saury (Cololabis saira).

BACKGROUND: Traditional sun-drying aquatic products are popular and recognized by customers, owing to their unique flavor and long-term preservation. However, the product quality and production efficiency cannot be guaranteed. Cololabis saira is rich in unsaturated fatty acids, which are susceptible to hyperoxidation during the drying process. This study aimed to make clear the role of ultraviolet (UV) radiation in flavor formation during drying processes of Cololabis saira to develop a modern drying technology. RESULTS: Lipid oxidation analysis revealed that moderate hydrolytic oxidation occurred in the UV-assisted cold-air drying group due to the combined influence of UV and cold-air circulation, resulting in the thiobarbituric acid reactive substances value being higher than that of cold-air drying group but lower than the natural drying group. Hexanal, heptanal, cis-4-heptenal, octanal, nonanal, (trans,trans)-2,4-heptadienal, (trans,trans)-2,6-nonanedial, 1-octen-3-ol, heptanol, 2,3-pentanedione, 3,5-octadien-2-one and trimethylamine were identified as the characteristic flavor odor-active compounds present in all Cololabis saira samples. Yet, during the natural drying process, sunlight promoted the lipid oxidation, resulting in the highest degree of lipid oxidation among three drying methods. Light and heat promoted lipid oxidation in Cololabis saira prepared through natural drying process, leading to a large accumulation of volatile compounds, such as 3-methylbutyraldehyde, 2,3-pentanedione, 1-propanol, and 3-pentanone. Cold air circulation inhibited lipid oxidation to some extent, resulting in a blander flavor profile. More cis-4-heptenal, cis-2-heptenal, octanal and 2-ethylfuran accumulated during the UV-assisted cold-air drying process, enriching its greasy flavor and burnt flavor. CONCLUSION: UV-assisted cold-air drying could promote moderate lipid oxidation, which is beneficial for improving product flavor. To sum up, UV radiation played a crucial role in the flavor formation during the drying process of Cololabis saira. © 2024 Society of Chemical Industry.

Atomically Resolved Transition Pathways of Iron Redox.

The redox transition between iron and its oxides is of the utmost importance in heterogeneous catalysis, biological metabolism, and geological evolution. The structural characteristics of this reaction may vary based on surrounding environmental conditions, giving rise to diverse physical scenarios. In this study, we explore the atomic-scale transformation of nanosized Fe3O4 under ambient-pressure H2 gas using in-situ environmental transmission electron microscopy. Our results reveal that the internal solid-state reactions dominated by iron diffusion are coupled with the surface reactions involving gaseous O or H species. During reduction, we observe two competitive reduction pathways, namely Fe3O4 → FeO → Fe and Fe3O4 → Fe. An intermediate phase with vacancy ordering is observed during the disproportionation reaction of Fe2+ → Fe0 + Fe3+, which potentially alleviates stress and facilitates ion migration. As the temperature decreases, an oxidation process occurs in the presence of environmental H2O and trace amounts of O2. A direct oxidation of Fe to Fe3O4 occurs in the absence of the FeO phase, likely corresponding to a change in the water vapor content in the atmosphere. This work elucidates a full dynamical scenario of iron redox under realistic conditions, which is critical for unraveling the intricate mechanisms governing the solid-solid and solid-gas reactions.

Regioselective epitaxial growth of metallic heterostructures.

Constructing regioselective architectures in heterostructures is important for many applications; however, the targeted design of regioselective architectures is challenging due to the sophisticated processes, impurity pollution and an unclear growth mechanism. Here we successfully realized a one-pot kinetically controlled synthetic framework for constructing regioselective architectures in metallic heterostructures. The key objective was to simultaneously consider the reduction rates of metal precursors and the lattice matching relationship at heterogeneous interfaces. More importantly, this synthetic method also provided phase- and morphology-independent behaviours as foundations for choosing substrate materials, including phase regulation from Pd20Sb7 hexagonal nanoplates (HPs) to Pd8Sb3 HPs, and morphology regulation from Pd20Sb7 HPs to Pd20Sb7 rhombohedra and Pd20Sb7 nanoparticles. Consequently, the activity of regioselective epitaxially grown Pt on Pd20Sb7 HPs was greatly enhanced towards the ethanol oxidation reaction; its activity was 57 times greater than that of commercial Pt/C, and the catalyst showed increased stability (decreasing by 16.3% after 2,000 cycles) and selectivity (72.4%) compared with those of commercial Pt/C (56.0%, 18.2%). This work paves the way for the design of unconventional well-defined heterostructures for use in various applications.

Regulatory Framework for Drug-Device Combination Products in the United States, Europe, and Korea.

Combination products (CPs) combine two or more product types such as drugs, devices, and/or biological products for increased safety and clinical effectiveness. The emergence of innovative CPs poses new challenges for regulatory agencies in assigning jurisdiction for premarket review and oversight. In US, the 1990 Safe Medical Devices Act defines and provides classification criteria for CPs, and the US government has developed a regulatory process through multiple acts, including the 21st Century Cures Act of 2016. Meanwhile, regulators in the European Union (EU) and the Republic of Korea have recently recognized the importance of premarket pathways for CPs. The European Medicines Agency (EMA) has issued guidelines and explanations on compliance issues related to drug-device CPs under MDR. EMA doesn't have the definitions of CPs, but uses the term drug-device combination products (drug-device CPs). CPs are categorized as drugs or medical devices, which follow their relevant regulatory framework. The Ministry of Food and Drug Safety (MFDS) in Korea has legal definitions of CPs under the Notice of the MFDS. CPs are designated as drugs or medical devices according to their primary mode of actions (PMOA) and follow regulatory processes through the framework of drugs or medical devices. This study aims to comprehensively summarize the regulatory oversight of CPs by analyzing the regulatory policies and legal frameworks in the US, the EU, and Korea. The regulatory challenges encountered when developing CPs are also discussed. With specific emphasis on the combination of drugs and devices, this study provides in-depth insights into the regulatory landscape, shedding light on the unique challenges associated with the development of CPs for this particular intersection of drugs and devices.

An all-metallic nanovesicle for hydrogen oxidation.

Vesicle, a microscopic unit that encloses a volume with an ultrathin wall, is ubiquitous in biomaterials. However, it remains a huge challenge to create its inorganic metal-based artificial counterparts. Here, inspired by the formation of biological vesicles, we proposed a novel biomimetic strategy of curling the ultrathin nanosheets into nanovesicles, which was driven by the interfacial strain. Trapped by the interfacial strain between the initially formed substrate Rh layer and subsequently formed RhRu overlayer, the nanosheet begins to deform in order to release a certain amount of strain. Density functional theory (DFT) calculations reveal that the Ru atoms make the curling of nanosheets more favorable in thermodynamics applications. Owing to the unique vesicular structure, the RhRu nanovesicles/C displays excellent hydrogen oxidation reaction (HOR) activity and stability, which has been proven by both experiments and DFT calculations. Specifically, the HOR mass activity of RhRu nanovesicles/C are 7.52 A mg(Rh+Ru)-1 at an overpotential of 50 mV at the rotating disk electrode (RDE) level; this is 24.19 times that of commercial Pt/C (0.31 mA mgPt-1). Moreover, the hydroxide exchange membrane fuel cell (HEMFC) with RhRu nanovesicles/C displays a peak power density of 1.62 W cm-2 in the H2-O2 condition, much better than that of commercial Pt/C (1.18 W cm-2). This work creates a new biomimetic strategy to synthesize inorganic nanomaterials, paving a pathway for designing catalytic reactors.

A comprehensive study of the colloidal properties, biocompatibility, and synergistic antioxidant actions of Antarctic krill phospholipids.

Excipient selection is crucial to address the oxidation and solubility challenges of bioactive substances, impacting their safety and efficacy. AKPL, a novel ω-3 polyunsaturated fatty acids (PUFAs) esterified phospholipid derived from Antarctic krill, demonstrates unique antioxidant capabilities and synergistic effects. It exhibits pronounced surface activity and electronegativity at physiological pH, as evidenced by a critical micelle concentration (CMC) of 0.15 g/L and ζ-potential of -49.9 mV. In aqueous environments, AKPL self-assembles into liposomal structures, offering high biocompatibility and promoting cell proliferation. Its polyunsaturated bond-rich structure provides additional oxidation sites, imparting antioxidant properties superior to other phospholipids like DSPC and DOPC. Additionally, AKPL augments the efficacy of lipophilic antioxidants, such as alpha-tocopherol and curcumin, in aqueous media through both intermolecular and intramolecular interactions. In sum, AKPL emerges as an innovative unsaturated phospholipid, offering new strategies for encapsulating and delivering oxygen-sensitive agents.

Ferroelastically protected reversible orthorhombic to monoclinic-like phase transition in ZrO2 nanocrystals.

Robust ferroelectricity in nanoscale fluorite oxide-based thin films enables promising applications in silicon-compatible non-volatile memories and logic devices. However, the polar orthorhombic (O) phase of fluorite oxides is a metastable phase that is prone to transforming into the ground-state non-polar monoclinic (M) phase, leading to macroscopic ferroelectric degradation. Here we investigate the reversibility of the O-M phase transition in ZrO2 nanocrystals via in situ visualization of the martensitic transformation at the atomic scale. We reveal that the reversible shear deformation pathway from the O phase to the monoclinic-like (M') state, a compressive-strained M phase, is protected by 90° ferroelectric-ferroelastic switching. Nevertheless, as the M' state gradually accumulates localized strain, a critical tensile strain can pin the ferroelastic domain, resulting in an irreversible M'-M strain relaxation and the loss of ferroelectricity. These findings demonstrate the key role of ferroelastic switching in the reversibility of phase transition and also provide a tensile-strain threshold for stabilizing the metastable ferroelectric phase in fluorite oxide thin films.

Structural Reversibility of Nanoscaled Sn Anodes.

Alloying-type anode materials provide high capacity for lithium-ion batteries; however, they suffer pulverization problems resulting from the volume change during cycling. Realizing the cycling reversibility of these anodes is therefore critical for sustaining their electrochemical performance. Here, we investigate the structural reversibility of Sn NPs during cycling at atomic-level resolution utilizing in situ high-resolution TEM. We observed a surprisingly near-perfect structural reversibility after a complete cycle. A three-step phase transition happens during lithiation, accompanied by the generation of a significant number of defects, grain boundaries, and up to 202% volume expansion. In subsequent delithiation, the volume, morphology, and crystallinity of the Sn NPs were restored to their initial state. Theoretical calculations show that compressive stress drives the removal of vacancies generated within the NPs during delithiation, therefore maintaining their intact morphology. This work demonstrates that removing vacancies during cycling can efficiently improve the structural reversibility of high-capacity anode materials.

Integrated assessment of available water volume for sustainable sponge city construction - A case study in Xi'an, China.

To address the lack of theoretical guidance for sponge city construction (SCC) in China, this study introduces a method to evaluate the available water volume (AWV) in urban watersheds. This evaluation is based on the water balance relationship, water volume, and ecological water demand (EWD). The Xi'an urban area was selected as a case study due to its water shortage and flooding issues. Results show monthly surface and subsurface AWV ranging between 53.06 and 53.98 million m3 and between 8,701.89 and 8,898.14 million m3, respectively. By maximizing the potential for surface AWV, an annual water supply of 527.75 million m3 could be provided, surpassing the annual artificial water consumption of 394.20 million m3, effectively addressing water scarcity. During the rainy season, implementing measures such as employing permeable paving materials, establishing wetlands and rainwater gardens, and constructing lakes and reservoirs can mitigate flooding caused by rainfall exceeding 32.8 mm. While the subsurface space in Xi'an holds significant potential for subsurface AWV utilization, revitalizing the ecological environment of subsurface water is crucial. Overall, the AWV theoretical framework offers a comprehensive solution to water shortage and flooding issues in the Xi'an urban area, serving as a vital theory for SCC.

[Development of an analytical system for dried blood spots for forensic toxicology: a case study of five common drugs and poisons].

Dried blood spot (DBS) technology is a simple and convenient method for collecting, transporting, and storing blood samples on filter paper, and has numerous applications in the clinical, research, and public health settings. This technique is gaining popularity in the field of forensic science because it facilitates the rapid analysis of prohibited drugs in blood samples and offers significant advantages in toxicology scenarios such as drinking-driving screening, drug abuse detection, and doping detection. However, the lack of a standardized system and the fact that its stability and reliability have not been thoroughly researched and demonstrated limit its application in judicial practice in China. DBS samples can be prepared, stored, and analyzed in various ways, all of which may significantly affect the results. In this study, we developed a method based on ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) that focuses on the preparation, pretreatment, analysis, and storage of DBS samples. A thorough investigation was conducted to examine the optimal preparation conditions, including the blood spot matrix, drying technique, and preprocessing parameters, such as the solvent and extraction method. Moreover, the analytical conditions, such as the mobile phase system and elution gradient, were established to facilitate the quantitative detection of methamphetamine, lidocaine, ketamine, fentanyl, and diazepam in both DBS and whole-blood samples. The impact of storage conditions, such as the temperature, humidity, and sealing, on the analytical results of the DBS and whole-blood samples was also examined. The results showed a strong linear relationship for lidocaine and fentanyl within the range of 0.5-100 ng/mL. Similarly, methamphetamine, ketamine, and diazepam exhibited good linearity within the range of 2-100 ng/mL. The coefficients of determination (r2) ranged from 0.9983 to 0.9997, and the limits of detection ranged from 0.2 to 0.5 ng/mL, indicating a high degree of correlation and sensitivity. Stability tests demonstrated that the five target substances remained stable in the DBS for 60 days, with the measured contents deviating from the nominal values by 15%. Moreover, the measurement results of the DBS samples were highly similar to those of the whole-blood samples, with mean percentage differences of 4.44%, 3.50%, 7.66%, 5.10%, and 5.25% for fentanyl, diazepam, ketamine, lidocaine, and methamphetamine, respectively. Throughout the 60-day storage period, the maintenance of temperatures of -20 and 4 ℃, as well as sealing and dry storage, was not necessary. Room temperature was the most practical storage environment for the DBS samples. The results for each target showed very small concentration differences between the whole-blood and DBS samples, indicating that the DBS samples were suitable for drug and poison analysis in blood. Furthermore, the DBSs exhibited high quantitative consistency with the whole-blood samples, rendering them suitable matrices for preserving blood samples. Because DBS samples are easy to handle and store, they can realize the lightweight preservation of blood samples and provide a novel solution for the analysis and preservation of blood samples in public security practice. We recommend conducting comprehensive validations before utilizing DBS for analysis, particularly in terms of quantification, to ensure the judicial reliability of the results.

Bismuth-doping boosting Na+ diffusion kinetics of layered oxide cathode with radially oriented {010} active lattice facet for sodium-ion batteries.

O3-type layered oxide cathodes (NaxTMO2) for sodium-ion batteries (SIBs) have attracted significant attention as one of the most promising potential candidates for practical energy storage applications. The poor Na+ diffusion kinetics is, however, one of the major obstacles to advancing large-scale practical application. Herein, we report bismuth-doped O3-NaNi0.5Mn0.5O2 (NMB) microspheres consisting of unique primary nanoplatelets with the radially oriented {010} active lattice facets. The NMB combines the advantages of the oriented and exposed electrochemical active planes for direct paths of Na+ diffusion, and the thick primary nanoplatelets for less surface parasitic reactions with the electrolyte. Consequently, the NMB cathode exhibits a long-term stability with an excellent capacity retention of 72.5% at 1C after 300 cycles and an enhanced rate capability at a 0.1C to 10C rate (1C = 240 mA g-1). Furthermore, the enhancement is elucidated by the small volume change, thin cathode-electrolyte-interphase (CEI) layer, and rapid Na+ diffusion kinetics. In particular, the radial orientation-based Bi-doping strategy is demonstrated to be effective at boosting electrochemical performance in other layered oxides (such as Bi-doped NaNi0.45Mn0.45Ti0.1O2 and NaNi1/3Fe1/3Mn1/3O2). The results provide a promising strategy of utilizing the advantages of the oriented active facets of primary platelets and secondary particles to develop high-rate layered oxide cathodes for SIBs.

Interfacial engineering method to regulate the performances of bilayer emulsions co-stabilized by casein/butyrylated dextrin nanoparticles and chitosan.

In present study, bilayer emulsions with different interfacial structures stabilized by casein/butyrylated dextrin nanoparticles (CDNP), chitosan (CS) and chitosan nanoparticles (CSNP) were prepared to overcome the limitations of conventional emulsions. The effects of chitosan morphology and incorporation sequences on the bilayer emulsions were examined. Bilayer emulsions prepared with CDNP as the inner layer and CS/CSNP as the outer layer were observed to have smaller droplet sizes (1.39 ± 86.74 um and 1.45 ± 7.87 um). Bilayer emulsions prepared with CDNP as the inner layer and CS as the outer layer exhibited the lowest creaming index (2.38 %) after 14 days of storage, indicating excellent stability. Furthermore, bilayer emulsion prepared with CDNP as the inner layer and CS as the outer layer also exhibited a uniform water distribution, excellent protein oxidative stability, and uniformly distributed droplets by the measurement of Low-field NMR, intrinsic tryptophan fluorescence and laser confocal laser scanning microscopy. These results indicated that the study provided a theoretical basis for the development and design of bilayer emulsions with different interfacial structures. This study also provides a new material for the preparation of delivery systems that protect biologically active compounds. Bilayer emulsions are promising for applications in traditional and manufactured food products.

Automatic center identification of electron diffraction with multi-scale transformer networks.

Selected area electron diffraction (SAED) is a widely used technique for characterizing the structure and measuring lattice parameters of materials. An autonomous analytic method has become an urgent demand for the large-scale SAED data produced from in-situ experiments. In this work, we realize the automatic processing for center identification with a proposed deep segmentation model named the multi-scale Transformer (MS-Trans) network. This algorithm enables robust segmentation of the central spots by combining a novel gated axial-attention module and multi-scale feature fusion. The proposed MS-Trans model shows high precision and robustness, enabling autonomous processing of SAED patterns without any prior knowledge. The application on in-situ SAED data of the oxidation process of FeNi alloy demonstrates its capability of implementing autonomous quantitative processing. © 2017 Elsevier Inc. All rights reserved.

In Situ Transmission Electron Microscopy Methods for Lithium-Ion Batteries.

In situ Transmission Electron Microscopy (TEM) stands as an invaluable instrument for the real-time examination of the structural changes in materials. It features ultrahigh spatial resolution and powerful analytical capability, making it significantly versatile across diverse fields. Particularly in the realm of Lithium-Ion Batteries (LIBs), in situ TEM is extensively utilized for real-time analysis of phase transitions, degradation mechanisms, and the lithiation process during charging and discharging. This review aims to provide an overview of the latest advancements in in situ TEM applications for LIBs. Additionally, it compares the suitability and effectiveness of two techniques: the open cell technique and the liquid cell technique. The technical aspects of both the open cell and liquid cell techniques are introduced, followed by a comparison of their applications in cathodes, anodes, solid electrolyte interphase (SEI) formation, and lithium dendrite growth in LIBs. Lastly, the review concludes by stimulating discussions on possible future research trajectories that hold potential to expedite the progression of battery technology.

Surface Lattice Modulation Enables Stable Cycling of High-Loading All-solid-state Batteries at High Voltages.

Halide solid electrolytes, known for their high ionic conductivity at room temperature and good oxidative stability, face notable challenges in all-solid-state Li-ion batteries (ASSBs), especially with unstable cathode/solid electrolyte (SE) interface and increasing interfacial resistance during cycling. In this work, we have developed an Al3+-doped, cation-disordered epitaxial nanolayer on the LiCoO2 surface by reacting it with an artificially constructed AlPO4 nanoshell; this lithium-deficient layer featuring a rock-salt-like phase effectively suppresses oxidative decomposition of Li3InCl6 electrolyte and stabilizes the cathode/SE interface at 4.5 V. The ASSBs with the halide electrolyte Li3InCl6 and a high-loading LiCoO2 cathode demonstrated high discharge capacity and long cycling life from 3 to 4.5 V. Our findings emphasize the importance of specialized cathode surface modification in preventing SE degradation and achieving stable cycling of halide-based ASSBs at high voltages.