Selective Oxidation of p-Cymene over Mesoporous LaCoO3 by Introducing Oxygen Vacancies.

The liquid-phase catalytic oxidation of p-cymene to 4-methylacetophenone is an industrially significant reaction. However, the targeted oxidation of a specific C-H bond of p-cymene is extremely difficult due to there being many branched chains in p-cymene. In here, we designed a simple method to synthesize mesoporous LaCoO3 catalysts with rich oxygen vacancy (Oov) sites. The as-prepared mesoporous LaCoO3 after 550 °C calcination (mLaCoO3) exhibits remarkable catalytic activity for solvent-free oxidation of the p-cymene reaction, with a selectivity of over 80.1% selectivity for 4-methylacetophenone and a conversion of 50.2% for p-cymene (120 °C, 3 MPa). Besides, recycling studies have demonstrated that the mLaCoO3 catalysts can be reused ten times in the aerobic oxidation of the p-cymene reaction without significant catalytic activity reduce. The experimental and characterization results indicated that the mesoporous structure of the catalyst is conducive to the generation of surface Oov, which can properly facilitate ion spread during the catalytic process and afford enough O2 for intermediate species, thus is beneficial for the generation of 4-methylacetophenone. This work demonstrates that the selectivity oxide p-cymene with an O2 employing mLaCoO3 catalyst is highly promising for chemical industrial applications.

The superiority of isomeric, fluorination and curtailed π-conjunction on A-D-A type acceptors for organic photovoltaics.

The performance of organic solar cell (OSC) devices has been significantly enhanced by the dramatic evolution of A-D-A type non-fullerene acceptors (NFAs). Nevertheless, the structure-property-performance relationship of NFAs in the OSC device is unclear. Here, the intrinsic design factors of isomeric, fluorination and π-conjunction curtailing on the photophysical properties of benzodi (thienopyran) (BDTP) (named NBDTP-M, NBDTTP-M, NBDTP-Fin, and NBDTP-Fout)-based NFAs are discussed. The results show that fluorination on the terminal group of NBDTP-Fout could effectively decrease the highest occupied orbital (HOMO) energy level and the lowest unoccupied orbital (LUMO) energy level. And the long π-conjugated donor unit for NBDTTP-M could increase the HOMO energy level and bring a small HOMO-LUMO energy bandgap. Meanwhile, the substitution of external oxygen atoms and the fluorine atoms in the terminal group could introduce positive changes to the electrostatic potential of the NBDTP-Fout, favouring the charge separation at the donor/acceptor interface. Moreover, the structural design of external oxygen atom substitution, fluorination on the terminal group and curtailed π-conjugated donor unit could decrease the electron vibration-coupling of exciton diffusion, exciton dissociation and electronic transfer processes. The suppression of the exciton decay and charge recombination in those high-performance NFAs indicate that the investigated molecular designs could be effective for further improvement of OSCs.

Theoretical Investigation and Molecular Design: A Series of Tripod-Type Cu(I) Blue Light Thermally Activated Delayed Fluorescence Materials.

The photophysical properties and luminescent mechanism of a series of tripod-type Cu(I) complexes in solution and solids were comprehensively investigated through theoretical simulations. From a microscopic perspective, the experimental phenomenon is explained: (1) The intrinsic reason for the quenching of complex 1 in solution was attributed to the significant nonradiative transition caused by structural deformation; (2) In the solid, the reduced ΔEST for complex 2 effectively facilitate reverse intersystem crossing (RISC) and improves its luminescence efficiency; (3) The enhanced performance of complex 3 in solution is attributed to that its stronger steric hindrance is advantageous to decrease not only the ΔEST but also the reorganization energy through intramolecular weak interactions. Based on complex 3, the tert-butyl substituted isomeric complex 4 was designed. Complex 4 further amplifies the advantages of 3 to further promote the RISC to make full use of excitons. Meanwhile, it has an emission wavelength of 462.6 nm, which makes it an excellent candidate for high-efficiency deep-blue TADF materials. This study provides valuable information for obtaining efficient blue phosphorescence and TADF dual-channel luminescent materials.

The Difference in Ir-Catalyzed C(sp2)-H and C(sp3)-H Bond Activation Assisted by a Directing Group: Cyclometalation via Cis- or Trans-Chelation?

Iridium-catalyzed C-H borylation of aromatic and aliphatic hydrocarbons assisted by a directing group was theoretically investigated. Density functional theory (DFT) calculations revealed both Ir-catalyzed C(sp2)-H and C(sp3)-H borylations via an IrIII/IrV catalytic cycle, where the tetra-coordinated (C, N)IrIII(Bpin)2 complex with two vacant sites is an active species. Dramatically, the orientation of cyclometalation for C(sp2)-H bond activation assisted by a directing group is different from the C(sp3)-H one. The activation energy (ΔG°‡ = 28.5 kcal mol-1) of the C(sp2)-H bond via trans-chelation to form cyclometalation is lower than that (41.4 kcal mol-1) via cis-chelation. In contrast, the ΔG°‡ (26.6 kcal mol-1) of the C(sp3)-H bond via cis-chelation to form cyclometalation is lower than that (34.3 kcal mol-1) via trans-chelation. In addition, the rate-determining step of Ir-catalyzed C(sp2)-H borylation is oxidative addition of the C(sp2)-H bond, while that of C(sp3)-H analogues is hydride migration. Such differences arise from not only the differences in the steric hindrance of the C(sp2) and secondary C(sp3) atoms but also the differences in the trans effect and steric effect of the two vacant sites of active species. These findings were expected to facilitate further studies on the design and synthesis of innovative ligands for Ir-catalyzed C-H borylation.

Dynamic Control of Asymmetric Charge Distribution for Electrocatalytic Urea Synthesis.

Constructing dual catalytic sites with charge density differences is an efficient way to promote urea electrosynthesis from parallel NO 3 - ${\mathrm{NO}}_3^ - $ and CO2 reduction yet still challenging in static system. Herein, a dynamic system is constructed by precisely controlling the asymmetric charge density distribution in an Au-doped coplanar Cu7 clusters-based 3D framework catalyst (Au@cpCu7CF). In Au@cpCu7CF, the redistributed charge between Au and Cu atoms changed periodically with the application of pulse potentials switching between -0.2 and -0.6 V and greatly facilitated the electrosynthesis of urea. Compared with the static condition of pristine cpCu7CF (FEurea = 5.10%), the FEurea of Au@cpCu7CF under pulsed potentials is up to 55.53%. Theoretical calculations demonstrated that the high potential of -0.6 V improved the adsorption of *HNO2 and *NH2 on Au atoms and inhibited the reaction pathways of by-products. While at the low potential of -0.2 V, the charge distribution between Au and Cu atomic sites facilitated the thermodynamic C-N coupling step. This work demonstrated the important role of asymmetric charge distribution under dynamic regulation for urea electrosynthesis, providing a new inspiration for precise control of electrocatalysis.

The Role of Terminal Fluorination on Energy Inversion in Organic Solar Cells.

Suppressing non-radiative energy loss (ΔE3) mediated by the triplet charge transfer state is crucial for high-performance organic solar cells (OSCs). Here, we decode the energy inversion through multi-scale theoretical simulations, which inhibit the formation of non-emissive triplet (T1) state. However, it is mystified by the system dependence. We first demonstrate a direct relationship of "the probability of Face-on orientation (PFace-on) is proportional to the probability of energy inversion (PEI)", which is related to the function of terminal fluorination. Through Pearson's correlation coefficient and machine learning model, the useful stacking structural parameters were obtained to clarify the effect of π-bridge group on the function of terminal fluorination. Based on the molecular descriptors established, we explain that the fluorination effect is beneficial to Face-on orientation and thus energy inversion due to the enhanced intermolecular coupling. But the π-bridge inhibits this coupling with the interfacial stacking configuration appearing more "TT_IC". This work provides a directional standard for promoting energy inversion to reduce ΔE3 for the high-performance OSCs.

Tuning Iron Active Sites of FeOOH via Al3+ and Heteroatom Doping-Induced Asymmetric Oxygen Vacancy Electronic Structure for Efficient Alkaline Water Splitting.

Oxygen evolution reaction is the essential anodic reaction for water splitting. Designing tunable electronic structures to overcome its slow kinetics is an effective strategy. Herein, the molecular ammonium iron sulfate dodecahydrate is employed as the precursor to synthesize the C, N, S triatomic co-doped Fe(Al)OOH on Ni foam (C,N,S-Fe(Al)OOH-NF) with asymmetric electronic structure. Both in situ oxygen vacancies and their special electronic configuration enable the electron transfer between the d-p orbitals and get the increase of OER activity. Density functional theory calculation further indicates the effect of electronic structure on catalytic activity and stability at the oxygen vacancies. In alkaline solution, the catalyst C,N,S-Fe(Al)OOH-NF shows good catalytic activity and stability for water splitting. For OER, the overpotential of 10 mA cm-2 is 264 mV, the tafel slope is 46.4 mV dec-1, the HER overpotential of 10 mA cm-2 is 188 mV, the tafel slope is 59.3 mV dec-1. The stability of the catalyst can maintain ≈100 h. This work has extraordinary implications for understanding the mechanistic relationship between electronic structure and catalytic activity for designing friendly metal (oxy)hydroxide catalysts.

Room-Temperature Synthesis of Covalently Bridged MOP@TpPa-CH3 Composite Photocatalysts for Artificial Photosynthesis.

The conversion of CO2 into useful chemicals via photocatalysts is a promising strategy for resolving the environmental problems caused by the addition of CO2. Herein, a series of composite photocatalysts MOP@TpPa-CH3 based on MOP-NH2 and TpPa-CH3 through covalent bridging have been prepared via a facile room-temperature evaporation method and employed for photocatalytic CO2 reduction. The photocatalytic performances of MOP@TpPa-CH3 are greater than those of TpPa-CH3 and MOP-NH2, where the CO generation rate of MOP@TpPa-CH3 under 10% CO2 still reaches 119.25 µmol g-1 h-1, which is 2.18 times higher than that under pure CO2 (54.74 µmol g-1 h-1). To investigate the structural factors affecting the photocatalytic activity, MOP@TBPa-CH3 without C═O groups is synthesized, and the photoreduction performance is also evaluated. The controlling experimental results demonstrate that the excellent photoreduction CO2 performance of MOP@TpPa-CH3 in a 10% CO2 atmosphere is due to the presence of C═O groups in TpPa-CH3. This work offers a new design and construction strategy for novel MOP@COF composites.

Carbon-metal versus metal-metal synergistic mechanism of ethylene electro-oxidation via electrolysis of water on TM2N6 sites in graphene.

Acetaldehyde (AA) and ethylene oxide (EO) are important fine chemicals, and are also substrates with wide applications for high-value chemical products. Direct electrocatalytic oxidation of ethylene to AA and EO can avoid the untoward effects from harmful byproducts and high energy emissions. The most central intermediate state is the co-adsorption and coupling of ethylene and active oxygen intermediates (*O) at the active site(s), which is restricted by two factors: the stability of the *O intermediate generated during the electrolysis of water on the active site at a certain applied potential and pH range; and the lower kinetic energy barriers of the oxidation process based on the thermo-migration barrier from the *O intermediate to produce AA/EO. The benefit of two adjacent active atoms is more promising, since diverse adsorption and flexible catalytic sites may be provided for elementary reaction steps. Motivated by this strategy, we explored the feasibility of various homonuclear TM2N6@graphenes with dual-atomic-site catalysts (DASCs) for ethylene electro-oxidation through first-principles calculations via thermodynamic evaluation, analysis of the surface Pourbaix diagram, and kinetic evaluation. Two reaction mechanisms through C-TM versus TM-TM synergism were determined. Between them, a TM-TM mechanism on 4 TM2N6@graphenes and a C-TM mechanism on 5 TM2N6@graphenes are built. All 5 TM2N6@graphenes through the C-TM mechanism exhibit lower kinetic energy barriers for AA and EO generation than the 4 TM2N6@graphenes through the TM-TM mechanism. In particular, Pd2N6@graphene exhibits the most excellent catalytic activity, with energy barriers for generating AA and EO of only 0.02 and 0.65 eV at an applied potential of 1.77 V vs. RHE for the generation of an active oxygen intermediate. Electronic structure analysis indicates that the intrinsic C-TM mechanism is more advantageous than the TM-TM mechanism for ethylene electro-oxidation, and this study also provides valuable clues for further experimental exploration.

External electric field driven conformation transition between lithium salts and electride-like molecules: intriguing NLO switches in Li@corannulene.

The external electric field has emerged as a powerful tool for building molecular switches with excellent properties. In this work, we investigate the impact of an external electric field on the transition between lithium salt and electride-like molecule conformations in Li@corannulene. Remarkably, the distance between the Li atom and the corannulene bottom displays a sharp increase under the influence of an external electric field strength of F-z = 110 × 10-4 a.u. As the external electric field strength increases, the Li atom brings about different directions of charge transfer (CT). The natural population analysis (NPA) charge and the molecular electrostatic potential (ESP) results show that the intermolecular CT occurs from the Li atom to the corannulene with the F-z ranging from 0 to 100 × 10-4 a.u. Interestingly, when the external electric field reaches F-z = 110 × 10-4 a.u., the CT is oriented from the corannulene to the Li atom. Moreover, electron localization function (ELF) basins are presented under an F-z of 110 × 10-4 a.u., which indicates that Li@corannulene exhibits electride-like (e-⋯[Li@corannulene]+) molecules and lithiation salt (Li+[corannulene]-) under an F-z of 0 to 100 × 10-4 a.u. Significantly, the differences in charge transfer also contribute to a significant improvement in hyperpolarizabilities (ßtot) during the conformation transition from lithiation salt (Li+[corannulene]-) to electride-like (e-⋯[Li@corannulene]+) molecules. This study explores the potential of Li@corannulene as a promising second-order NLO material, and the external electric field provides an efficient strategy for designing and developing NLO switching devices.

Insight into the Mechanism of CO2 Chemical Fixation into Epoxides by Windmill-Shaped Polyoxovanadate and n-Bu4NX (X = Br, I).

Carbon dioxide (CO2) coupled with epoxide to generate cyclic carbonate stands out in carbon neutrality due to its 100% atom utilization. In this work, the mechanism of CO2 cycloaddition with propylene oxide (PO) cocatalyzed by windmill-shaped polyoxovanadate, [(C2N2H8)4(CH3O)4VIV4VV4O16]·4CH3OH (V8-1), and n-Bu4NX (X = Br, I) was thoroughly investigated using density functional theory (DFT) calculations. The ring-opening, CO2-insertion, and ring-closing steps of the process were extensively studied. Our work emphasizes the synergistic effect between V8-1 and n-Bu4NX (X = Br, I). Through the analysis of an independent gradient model based on Hirshfeld partition (IGMH), it was found that the attack of n-Bu4NX (X = Br, I) on Cß of PO triggers a distinct attractive interaction between the active fragment and the surrounding framework, serving as the primary driving force for the ring opening of PO. Furthermore, the effect of different cocatalysts was explored, with n-Bu4NI being more favorable than n-Bu4NBr. Moreover, the role of V8-1 in the CO2 cycloaddition reaction was clarified as not only acting as Lewis acid active sites but also serving as "electron sponges". This work is expected to advance the development of novel catalysts for organic carbonate formation.

A hybridization-induced charge-transfer state energy arrangement reduces nonradiative energy loss in organic solar cells.

Here, we explain why the Energy Gap Law and the energy inversion related to the charge-transfer state have opposite effects on the trend of nonradiative energy loss of organic solar cells. The root is the existing condition of energy inversion. There is indeed a certain probability of energy inversion, but it will eventually be implicit or explicit as determined by the hybridization, which depends on the electron-withdrawing unit of the donor, giving rise to different stacking sites. The triplet-state hybridization leads to an explicit characteristic, while singlet-state hybridization leads to an implicit characteristic.

Heterometallic MIL-125(Ti-Al) frameworks for electrochemical determination of ascorbic acid, dopamine and uric acid.

The detection of ascorbic acid (AA), dopamine (DA), and uric acid (UA) is not only of great significance in the areas of biomedicine and neurochemistry but also helpful in disease diagnosis and pathology research. Due to their diverse structures, designability, and large specific surface areas, metal-organic frameworks (MOFs) have recently caught considerable attention in the electrochemical field. Herein, a family of heterometallic MOFs with amino modification, MIL-125(Ti-Al)-xNH2 (x = 0%, 25%, 50%, 75%, and 100%), were synthesized and employed as electrochemical sensors for the detection of AA, DA, and UA. Among them, MIL-125(Ti-Al)-75%NH2 exhibited the most promising electrochemical behavior with 40% doping of carbon black in 0.1 M PBS (pH = 7.10), which displayed individual detection performance with wide linear detection ranges (1.0-6.5 mM for AA, 5-100 µM for DA and 5-120 µM for UA) and low limits of detection (0.215 mM for AA, 0.086 µM for DA, and 0.876 µM for UA, S/N = 3). Furthermore, the as-prepared MIL-125(Ti-Al)-75%NH2/GCE provided a promising platform for future application in real sample analysis, owing to its excellent anti-interference performance and good stability.

Artificial cavernosa-like tissue based on multibubble Matrigel and a human corpus cavernous fibroblast scaffold.

Ex vivo tissue culture of the human corpus cavernosum (CC) can be used to explore the tissue structural changes and complex signaling networks. At present, artificial CC-like tissues based on acellular or three-dimensional (3D)-printed scaffolds are used to solve the scarcity of primary penis tissue samples. However, inconvenience and high costs limit the wide application of such methods. Here, we describe a simple, fast, and economical method of constructing artificial CC-like tissue. Human CC fibroblasts (FBs), endothelial cells (ECs), and smooth muscle cells (SMCs) were expanded in vitro and mixed with Matrigel in specific proportions. A large number of bubbles were formed in the mixture by vortexing combined with pipette blowing, creating a porous, spongy, and spatial structure. The CC FBs produced a variety of signaling factors, showed multidirectional differentiation potential, and grew in a 3D grid in Matrigel, which is necessary for CC-like tissue to maintain a porous structure as a cell scaffold. Within the CC-like tissue, ECs covered the surface of the lumen, and SMCs were located inside the trabeculae, similar to the structure of the primary CC. Various cell components remained stable for 3 days in vitro , but the EC content decreased on the 7 th day. Wingless/integrated (WNT) signaling activation led to lumen atrophy and increased tissue fibrosis in CC-like tissue, inducing the same changes in characteristics as in the primary CC. This study describes a preparation method for human artificial CC-like tissue that may provide an improved experimental platform for exploring the function and structure of the CC and conducting drug screening for erectile dysfunction therapy.

Tuning optical properties of π-conjugated double nanohoops under external electric field stimuli-responsiveness.

Carbon nanorings have attracted substantial interest from synthetic chemists due to their unique topological structures and distinct physical properties. An intriguing π-conjugated double-nanoring structure, denoted as [8]CPP-[10]cyclacene, was constructed via the integration of [8]cycloparaphenylene ([8]CPP) into [10]cyclacene. Using the external electric field stimuli-responsiveness of [8]CPP-[10]cyclacene, directional charge transfer can be induced, resulting in the emergence of intriguing properties. The effects of the external electric field in three specific directions were explored, vertically in the [8]CPP unit (Fy), vertically in the [10]cyclacene unit (Fz), and horizontally along the double nanorings diameter (Fx). Interestingly, the external electric field vertically to the [10]cyclacene unit significantly enhanced the first hyperpolarizability (ßtot) compared to that vertically to the [8]CPP unit. Notably, [8]CPP-[10]cyclacene under Fx exhibited significantly larger the ßtot values (1.48 × 105 a.u.) than those of vertical Fy and Fz. This work opens up a wide range of nonlinear optics, making it a compelling area to explore in the field of carbon nanomaterials.

Insights into the Mechanism of Nitrobenzene Reduction to Aniline by Phosphomolybdic Acid Supported TM1 Single-Atom Catalysts.

Catalytic hydrogenation of nitrobenzene (Ph-NO2) to aniline (Ph-NH2) is a model reaction in the field of catalysis, in which the development of efficient catalysts remains a great challenge due to the lack of strategies to solve activity and selectivity problems. In this work, the mechanism of Ph-NO2 hydrogenation over Pt1 supported on phosphomolybdic acid (α-PMA) was proposed by density functional theory (DFT) calculations. The results show that the dissociation of the first and second N-O bonds is triggered by single H-induced and double H-induced mechanisms, respectively. The limiting potential of the reaction process is -0.19 V, which is the smallest potential in the field of Ph-NO2 reduction reaction to date. In the whole reaction process, the catalytic active site is the Pt atom, and polyoxometalate plays the role of an electronic sponge in the reaction. Additionally, based on experimentally confirmed Pt1/Na3PMA, the reduction capacity of Pd1/Na3PMA toward Ph-NO2 was predicted by DFT calculation. The distinctive adsorption patterns of Ph-NO2 on Pt1/Na3PMA and Pd1/Na3PMA were elucidated using the DOS diagram and fragment molecular orbital analysis. We anticipate that our theoretical calculations can provide novel perspectives for experimental researchers.

Tunable covalent benzo-heterocyclic rings constructed using two-dimensional conjugated polymers for visible-light-driven water splitting.

Developing highly efficient, stable, and cost-effective two-dimensional (2D) conjugated polymers (CPs) for overall water splitting (OWS) is critical for producing clean and renewable hydrogen energy, yet it remains a great challenge. Here, we designed eight 2D CPs through the topological assembly of diacetylene and benzene-derived molecular linkers that can offer active sites for hydrogen and oxygen evolution reactions, and explored their structural, electronic, optical, and photocatalytic OWS properties by performing first-principles computations. It is shown that incorporating benzo-heterocyclic rings into CPs can significantly modulate the electronic structures of CPs and broaden the spectral absorption, suitable for visible-light-driven OWS. Remarkably, through a range of screening criteria, including stability, electronic band structures, band edge alignments, and photocatalytic activity, we found that CP-4 based on diacetylene and benzotrifuran can spontaneously trigger the OWS in a neutral environment under its own light-induced bias, eliminating the need for sacrificial agents or cocatalysts. Specifically, the HER active site is primarily located at diacetylene moieties, while the OER active site is mainly concentrated on the benzo-heterocyclic rings. Moreover, the ideal STH efficiency for OWS on CP-4 was estimated to be 13.87%, highlighting its potential as a prospective photocatalyst for large-scale industrial OWS. Our findings open a door to the rational design of novel polymer photocatalysts for OWS.

A Theoretical Study on the Underlying Factors of the Difference in Performance of Organic Solar Cells Based on ITIC and Its Isomers.

Recently, non-fullerene-based organic solar cells (OSCs) have made great breakthroughs, and small structural differences can have dramatic impacts on the power conversion efficiency (PCE). We take ITIC and its isomers as examples to study their effects on the performance of OSCs. ITIC and NFBDT only differed in the side chain position, and they were used as models with the same donor molecule, PBDB-T, to investigate the main reasons for the difference in their performance in terms of theoretical methods. In this work, a detailed comparative analysis of the electronic structure, absorption spectra, open circuit voltage and interfacial parameters of the ITIC and NFBDT systems was performed mainly by combining the density functional theory/time-dependent density functional theory and molecular dynamics simulations. The results showed that the lowest excited state of the ITIC molecule possessed a larger ∆q and more hybrid FE/CT states, and PBDB-T/ITIC had more charge separation paths as well as a larger kCS and smaller kCR. The reason for the performance difference between PBDB-T/ITIC and PBDB-T/NFBDT was elucidated, suggesting that ITIC is a superior acceptor based on a slight modulation of the side chain and providing a guiding direction for the design of superior-performing small molecule acceptor materials.

Co-based MOF heterogeneous catalyst for the efficient degradation of organic dye via peroxymonosulfate activation.

In this study, a new cobalt-based metal-organic framework (JLNU-500), [Co2(OH)(PBA)(AIP)]·3DMA·0.75H2O (4-(pyridin-4-yl) benzoic acid (HPBA), 5-aminoisophthalic acid (H2AIP) and N,N-dimethylacetamide (DMA)), was fabricated using a solvothermal method. JLNU-500 has 3D network architecture with 1D nanopore channels. The prepared JLNU-500 can activate peroxymonosulfate (PMS) for Rhodamine B (RhB) dye decolorization. Interestingly, catalyst JLNU-500 exhibited high efficiency for PMS activation, and nearly 100% (above 99.8%) removal of RhB with a high concentration (50.0 mg L-1, 100 mL) was achieved within 6 min. The reaction rate constant of the JLNU-500/PMS system was 1.02 min-1 calculated based on the pseudo-first-order kinetics, which is higher than that of the other reported catalysts. Furthermore, the factors, which could influence PMS activation were also investigated, such as PMS dosage, catalyst dosage, pollutant RhB concentration, reaction temperature and solution pH. More importantly, the radical trapping experiments ferreted out that sulfate (SO4˙-) and hydroxyl (˙OH) radicals were the dominating oxidants in the removal of RhB. Moreover, the possible degradation mechanism was elucidated. This study provides new prospects for fabricating new MOFs that can potentially be employed for high-efficiency catalytic oxidation as heterogeneous catalysts.

Construction of Zr-Metal-Organic Frameworks-Based Composite Materials toward Anhydrous Proton Conduction and Photocatalytic CO2 Reduction.

Metal-organic frameworks constructed from Zr usually possess excellent chemical and physical stability. Therefore, they have become attractive platforms in various fields. In this work, two families of hybrid materials based on ZrSQU have been designed and synthesized, named Im@ZrSQU and Cu@ZrSQU, respectively. Im@ZrSQU was prepared through the impregnation method and employed for proton conduction. Im@ZrSQU exhibited terrific proton conduction performance in an anhydrous environment, with the highest proton conduction value of 3.6 × 10-2 S cm-1 at 110 °C. In addition, Cu@ZrSQU was synthesized via the photoinduction method for the photoreduction of CO2, which successfully promoted the conversion of CO2 into CO and achieved the CO generation rate of up to 12.4 µmol g-1 h-1. The photocatalytic performance of Cu@ZrSQU is derived from the synergistic effect of Cu NPs and ZrSQU. Based on an in-depth study and discussion toward ZrSQU, we provide a versatile platform with applications in the field of proton conduction and photocatalysis, which will guide researchers in their further studies.