Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 9 de 9
Filtrar
Más filtros

Base de datos
Tipo del documento
Intervalo de año de publicación
1.
Small ; 19(4): e2205284, 2023 Jan.
Artículo en Inglés | MEDLINE | ID: mdl-36433825

RESUMEN

Micro-sized silicon (µSi) anode features fewer interfacial side reactions and lower costs compared to nanosized silicon, and has higher commercial value when applied as a lithium-ion battery (LIB) anode. However, the high localized stress generated during (de)lithiation causes electrode breakdown and performance deterioration of the µSi anode. In this work, hollow graphitic carbons with tailored dual sizes are employed as conductive additives for the µSi anode to overcome electrode failure. The dual-size hollow graphitic carbons (HGC) additives consist of particles with micrometer size similar to the µSi particles; these additives are used for strain regulation. Additionally, nanometer-size particles similar to commercial carbon black Spheron (SP) are used mainly for kinetics acceleration. In addition to building an efficient conductive network, the dual-size hollow graphitic carbon conductive additive prevents the fracture of the electrode by reducing local stress and alleviating volume expansion. The µSi anode with dual-size hollow graphitic carbons as conductive additives achieves an impressive capacity of 651.4 mAh g-1 after 500 cycles at a high current density of 2 A g-1 . These findings suggest that dual-size hollow graphitic carbons are expected to be superior conductive additives for micro-sized alloy anodes similar to µSi.

2.
R Soc Open Sci ; 7(9): 200736, 2020 Sep.
Artículo en Inglés | MEDLINE | ID: mdl-33047035

RESUMEN

A facile procedure for the synthesis of ultra-fine silicon nanoparticles without the need for a Schlenk vacuum line is presented. The process consists of the production of a (HSiO1.5) n sol-gel precursor based on the polycondensation of low-cost trichlorosilane (HSiCl3), followed by its annealing and etching. The obtained materials were thoroughly characterized after each preparation step by electron microscopy, Fourier transform and Raman spectroscopy, X-ray dispersion spectroscopy, diffraction methods and photoluminescence spectroscopy. The data confirm the formation of ultra-fine silicon nanoparticles with controllable average diameters between 1 and 5 nm depending on the etching time.

3.
Adv Mater ; 32(45): e2002755, 2020 Nov.
Artículo en Inglés | MEDLINE | ID: mdl-32965054

RESUMEN

In 1665 Christiaan Huygens first noticed how two pendulums, regardless of their initial state, would synchronize.  It is now known that the universe is full of complex self-organizing systems, from neural networks to correlated materials. Here, graphene flakes, nucleated over a polycrystalline graphene film, synchronize during growth so as to ultimately yield a common crystal orientation at the macroscale. Strain and diffusion gradients are argued as the probable causes for the long-range cross-talk between flakes and the formation of a single-grain graphene layer. The work demonstrates that graphene synthesis can be advanced to control the nucleated crystal shape, registry, and relative alignment between graphene crystals for large area, that is, a single-crystal bilayer, and (AB-stacked) few-layer graphene can been grown at the wafer scale.

4.
Nano Lett ; 20(6): 4354-4361, 2020 Jun 10.
Artículo en Inglés | MEDLINE | ID: mdl-32357000

RESUMEN

Compared to van der Waals two-dimensional (2D) layers with lateral covalent bonds, metallic bonding systems favor close-packed structures, and thus, free-standing 2D metals have remained, for the most part, elusive. However, a number of theoretical studies suggest a number of metals can exist as 2D materials and a few early experiments support this notion. Here we demonstrate free-standing single-atom-thick crystalline chromium (Cr) suspended membranes using aberration-corrected transmission electron microscopy and image simulations. Density functional theory studies confirm the 2D Cr membranes have an antiferromagnetic ground state making them highly attractive for spintronic applications. Moreover, the work also helps consolidate the existence of a new family of 2D metal layers.

5.
Small ; 16(5): e1907115, 2020 Feb.
Artículo en Inglés | MEDLINE | ID: mdl-31943829

RESUMEN

Since the advent of monolayered 2D transition metal carbide and nitrides (MXenes) in 2011, the number of different monolayer systems and the study thereof have been on the rise. Mo2 Ti2 C3 is one of the least studied MXenes and new insights to this material are of value to the field. Here, the stability of Mo2 Ti2 C3 under electron irradiation is investigated. A transmission electron microscope (TEM) is used to study the structural and elemental changes in situ. It is found that Mo2 Ti2 C3 is reasonably stable for the first 2 min of irradiation. However, structural changes occur thereafter, which trigger increasingly rapid and significant rearrangement. This results in the formation of pores and two new nanomaterials, namely, N-doped graphene membranes and Mo nanoribbons. The study provides insight into the stability of Mo2 Ti2 C3 monolayers against electron irradiation, which will allow for reliable future study of the material using TEM. Furthermore, these findings will facilitate further research in the rapidly growing field of electron beam driven chemistry and engineering of nanomaterials.

6.
ACS Nano ; 13(7): 8312-8319, 2019 Jul 23.
Artículo en Inglés | MEDLINE | ID: mdl-31284713

RESUMEN

Two dimensional (2D) materials-based plasmon-free surface-enhanced Raman scattering (SERS) is an emerging field in nondestructive analysis. However, impeded by the low density of state (DOS), an inferior detection sensitivity is frequently encountered due to the low enhancement factor of most 2D materials. Metallic transition-metal dichalcogenides (TMDs) could be ideal plasmon-free SERS substrates because of their abundant DOS near the Fermi level. However, the absence of controllable synthesis of metallic 2D TMDs has hindered their study as SERS substrates. Here, we realize controllable synthesis of ultrathin metallic 2D niobium disulfide (NbS2) (<2.5 nm) with large domain size (>160 µm). We have explored the SERS performance of as-obtained NbS2, which shows a detection limit down to 10-14 mol·L-1. The enhancement mechanism was studied in depth by density functional theory, which suggested a strong correlation between the SERS performance and DOS near the Fermi level. NbS2 features the most abundant DOS and strongest binding energy with probe molecules as compared with other 2D materials such as graphene, 1T-phase MoS2, and 2H-phase MoS2. The large DOS increases the intermolecular charge transfer probability and thus induces prominent Raman enhancement. To extend the results to practical applications, the resulting NbS2-based plasmon-free SERS substrates were applied for distinguishing different types of red wines.

7.
ACS Nano ; 13(2): 978-995, 2019 Feb 26.
Artículo en Inglés | MEDLINE | ID: mdl-30673226

RESUMEN

Investigations on monolayered transition metal dichalcogenides (TMDs) and TMD heterostructures have been steadily increasing over the past years due to their potential application in a wide variety of fields such as microelectronics, sensors, batteries, solar cells, and supercapacitors, among others. The present work focuses on the characterization of TMDs using transmission electron microscopy, which allows not only static atomic resolution but also investigations into the dynamic behavior of atoms within such materials. Herein, we present a body of recent research from the various techniques available in the transmission electron microscope to structurally and analytically characterize layered TMDs and briefly compare the advantages of TEM with other characterization techniques. Whereas both static and dynamic aspects are presented, special emphasis is given to studies on the electron-driven in situ dynamic aspects of these materials while under investigation in a transmission electron microscope. The collection of the presented results points to a future prospect where electron-driven nanomanipulation may be routinely used not only in the understanding of fundamental properties of TMDs but also in the electron beam engineering of nanocircuits and nanodevices.

8.
ACS Nano ; 11(2): 1946-1956, 2017 02 28.
Artículo en Inglés | MEDLINE | ID: mdl-28117971

RESUMEN

To synthesize graphene by chemical vapor deposition (CVD) both in large area and with uniform layer number directly over Si/SiOx has proven challenging. The use of catalytically active metal substrates, in particular Cu, has shown far greater success and therefore is popular. That said, for electronics applications it requires a transfer procedure, which tends to damage and contaminate the graphene. Thus, the direct fabrication of uniform graphene on Si/SiOx remains attractive. Here we show a facile confinement CVD approach in which we simply "sandwich" two Si wafers with their oxide faces in contact to form uniform monolayer graphene. A thorough examination of the material reveals it comprises faceted grains despite initially nucleating as round islands. Upon clustering, they facet to minimize their energy. This behavior leads to faceting in polygons, as the system aims to ideally form hexagons, the lowest energy form, much like the hexagonal cells in a beehive, which requires the minimum wax. This process also leads to a near minimal total grain boundary length per unit area. This fact, along with the high graphene quality, is reflected in its electrical performance, which is highly comparable with graphene formed over other substrates, including Cu. In addition, the graphene growth is self-terminating. Our CVD approach is easily scalable and will make graphene formation directly on Si wafers competitive against that from metal substrates, which suffer from transfer. Moreover, this CVD route should be applicable for the direct synthesis of other 2D materials and their van der Waals heterostructures.

9.
J Am Chem Soc ; 134(20): 8646-54, 2012 May 23.
Artículo en Inglés | MEDLINE | ID: mdl-22545779

RESUMEN

Coexistence of both edge plane and basal plane in graphite often hinders the understanding of lithium ion diffusion mechanism. In this report, two types of graphene samples were prepared by chemical vapor deposition (CVD): (i) well-defined basal plane graphene grown on Cu foil and (ii) edge plane-enriched graphene layers grown on Ni film. Electrochemical performance of the graphene electrode can be split into two regimes depending on the number of graphene layers: (i) the corrosion-dominant regime and (ii) the lithiation-dominant regime. Li ion diffusion perpendicular to the basal plane of graphene is facilitated by defects, whereas diffusion parallel to the plane is limited by the steric hindrance that originates from aggregated Li ions adsorbed on the abundant defect sites. The critical layer thickness (l(c)) to effectively prohibit substrate reaction using CVD-grown graphene layers was predicted to be ∼6 layers, independent of defect population. Our density functional theory calculations demonstrate that divacancies and higher order defects have reasonable diffusion barrier heights allowing lithium diffusion through the basal plane but neither monovacancies nor Stone-Wales defect.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA