Structure Transformation of Methylammonium Polyoxomolybdates via In-Solution Acidification and Solid-State Heating from Methylammonium Monomolybdate and Application as Negative Staining Reagents for Coronavirus Observation.

We prepared polyoxomolybdates with methylammonium countercations from methylammonium monomolybdate, (CH3NH3)2[MoO4], through two dehydrative condensation methods, acidifying in the aqueous solution and solid-state heating. Discrete (CH3NH3)10[Mo36O112(OH)2(H2O)14], polymeric ((CH3NH3)8[Mo36O112(H2O)14])n, and polymeric ((CH3NH3)4[γ-Mo8O26])n were selectively isolated via pH control of the aqueous (CH3NH3)2[MoO4] solution. The H2SO4-acidified solution of pH < 1 produced "sulfonated α-MoO3", polymeric ((CH3NH3)2[(MoO3)3(SO4)])n. The solid-state heating of (CH3NH3)2[MoO4] in air released methylamine and water to produce several methylammonium polyoxomolybdates in the sequence of discrete (CH3NH3)8[Mo7O24-MoO4], discrete (CH3NH3)6[Mo7O24], discrete (CH3NH3)8[Mo10O34], and polymeric ((CH3NH3)4[γ-Mo8O26])n, before their transformation into molybdenum oxides such as hexagonal-MoO3 and α-MoO3. Notably, some of their polyoxomolybdate structures were different from polyoxomolybdates produced from ammonium molybdates, such as (NH4)2[MoO4] or (NH4)6[Mo7O24], indicating that countercation affected the polyoxomolybdate structure. Moreover, among the tested polyoxomolybdates, (CH3NH3)6[Mo7O24] was the best negative staining reagent for the observation of the SARS-CoV-2 virus using transmission electron microscopy.

Mechanochemical Synthesis of Perovskite Oxyhydrides: Insights from Shear Modulus.

Perovskite oxyhydrides have attracted recent attention due to their intriguing properties such as ionic conductivity and catalysis, but their repertoire is still restricted compared to perovskite oxynitrides and oxyfluorides. Historically, perovskite oxyhydrides have been prepared mostly by topochemical reactions and high-pressure (HP) reactions, while in this study, we employed a mechanochemical (MC) approach, which enables the synthesis of a series of ABO2H-type oxyhydrides, including those with the tolerance factor (t) much smaller than 1 (e.g., SrScO2H with t = 0.936) which cannot be obtained by HP synthesis. The octahedral tilting, often present in perovskite oxides, does not occur, suggesting that the lack of π-symmetry of the H 1s orbital and the large polarization destabilize tilted low-symmetry structures. Interestingly, SrCrO2H (t = 0.997), previously reported with the HP method, was not achieved with the MC method. A comparative analysis revealed a correlation between the feasibility of MC reactions and the (calculated) shear modulus of the starting reagents (binary oxides and hydrides). Notably, this indicator is not exclusive to oxyhydride perovskites but extends to oxide perovskites (SrMO3). This study demonstrates that MC synthesis offers unique opportunities not only to expand the compositional space in oxyhydrides in various structural types but also to provide a guide for the choice of starting materials for the synthesis of other compounds.

Construction of Ideal One-Dimensional Spin Chains by Topochemical Dehydration/Rehydration Route.

One-dimensional (1D) Heisenberg antiferromagnets are of great interest due to their intriguing quantum phenomena. However, the experimental realization of such systems with large spin S remains challenging because even weak interchain interactions induce long-range ordering. In this study, we present an ideal 1D S = 5/2 spin chain antiferromagnet achieved through a multistep topochemical route involving dehydration and rehydration. By desorbing three water molecules from (2,2'-bpy)FeF3(H2O)·2H2O (2,2'-bpy = 2,2'-bipyridyl) at 150 °C and then intercalating two water molecules at room temperature (giving (2,2'-bpy)FeF3·2H2O 1), the initially isolated FeF3ON2 octahedra combine to form corner-sharing FeF4N2 octahedral chains, which are effectively separated by organic and added water molecules. Mössbauer spectroscopy reveals significant dynamical fluctuations down to 2.7 K, despite the presence of strong intrachain interactions. Moreover, results from electron spin resonance (ESR) and heat capacity measurements indicate the absence of long-range order down to 0.5 K. This controlled topochemical dehydration/rehydration approach is further extended to (2,2'-bpy)CrF3·2H2O with S = 3/2 1D chains, thus opening the possibility of obtaining other low-dimensional spin lattices.

Anionic Sublattices in Halide Solid Electrolytes: A Case Study with the High-Pressure Phase of Li3ScCl6.

The Li3MX6 compounds (M=Sc, Y, In; X=Cl, Br) are known as promising ionic conductors due to their compatibility with typical metal oxide cathode materials. In this study, we have successfully synthesized γ-Li3ScCl6 using high pressure for the first time in this family. Structural analysis revealed that the high-pressure polymorph crystallizes in the polar and chiral space group P63mc with hexagonal close-packing (hcp) of anions, unlike the ambient-pressure α-Li3ScCl6 and its spinel analog with cubic closed packing (ccp) of anions. Investigation of the known Li3MX6 family further revealed that the cation/anion radius ratio, rM/rX, is the factor that determines which anion sublattice is formed and that in γ-Li3ScCl6, the difference in compressibility between Sc and Cl exceeds the ccp rM/rX threshold under pressure, enabling the ccp-to-hcp conversion. Electrochemical tests of γ-Li3ScCl6 demonstrate improved electrochemical reduction stability. These findings open up new avenues and design principles for lithium solid electrolytes, enabling routes for materials exploration and tuning electrochemical stability without compositional changes or the use of coatings.

Thermal multiferroics in all-inorganic quasi-two-dimensional halide perovskites.

Multiferroic materials, particularly those possessing simultaneous electric and magnetic orders, offer a platform for design technologies and to study modern physics. Despite the substantial progress and evolution of multiferroics, one priority in the field remains to be the discovery of unexplored materials, especially those offering different mechanisms for controlling electric and magnetic orders1. Here we demonstrate the simultaneous thermal control of electric and magnetic polarizations in quasi-two-dimensional halides (K,Rb)3Mn2Cl7, arising from a polar-antipolar transition, as evidenced using both X-ray and neutron powder diffraction data. Our density functional theory calculations indicate a possible polarization-switching path including a strong coupling between the electric and magnetic orders in our halide materials, suggesting a magnetoelectric coupling and a situation not realized in oxide analogues. We expect our findings to stimulate the exploration of non-oxide multiferroics and magnetoelectrics to open access to alternative mechanisms, beyond conventional electric and magnetic control, for coupling ferroic orders.

Large Perpendicular Magnetic Anisotropy Induced by an Intersite Charge Transfer in Strained EuVO2H Films.

Perovskite oxides ABO3 continue to be a major focus in materials science. Of particular interest is the interplay between A and B cations as exemplified by intersite charge transfer (ICT), which causes novel phenomena including negative thermal expansion and metal-insulator transition. However, the ICT properties were achieved and optimized by cationic substitution or ordering. Here we demonstrate an anionic approach to induce ICT using an oxyhydride perovskite, EuVO2H, which has alternating layers of EuH and VO2. A bulk EuVO2H behaves as a ferromagnetic insulator with a relatively high transition temperature (TC) of 10 K. However, the application of external pressure to the EuIIVIIIO2H bulk or compressive strain from the substrate in the thin films induces ICT from the EuIIH layer to the VIIIO2 layer due to the extended empty V dxy orbital. The ICT phenomenon causes the VO2 layer to become conductive, leading to an increase in TC that is dependent on the number of carriers in the dxy orbitals (up to a factor of 4 for 10 nm thin films). In addition, a large perpendicular magnetic anisotropy appears with the ICT for the films of <100 nm, which is unprecedented in materials with orbital-free Eu2+, opening new perspectives for applications. The present results provide opportunities for the acquisition of novel functions by alternating transition metal/rare earth layers with heteroanions.

Potassium-rich antiperovskites K3HTe and K3FTe and their structural relation to lithium and sodium counterparts.

Unlike perovskite oxides, antiperovskites M3HCh and M3FCh (M = Li, Na; Ch = S, Se, Te) mostly retain their ideal cubic structure over a wide range of compositions owing to anionic size flexibility and low-energy phonon modes that promote their ionic conductivity. In this study, we show the synthesis of potassium-based antiperovskites K3HTe and K3FTe and discuss the structural features in comparison with lithium and sodium analogues. It is shown experimentally and theoretically that both compounds maintain a cubic symmetry and can be prepared at ambient pressure, in contrast to most of the reported M3HCh and M3FCh which require high pressure synthesis. A systematic comparison of a series of cubic M3HTe and M3FTe (M = Li, Na, K) revealed that telluride anions contract in the order of K, Na, Li, with a pronounced contraction in the Li system. This result can be understood in terms of the difference in charge density of alkali metal ions as well as the size flexibility of Ch anions, contributing to the stability of the cubic symmetry.

Pressure-Induced Anion Order-Disorder Transition in Layered Perovskite Sr2LiHOCl2.

While cation order-disorder transitions have been extensively investigated because of their decisive impact on chemical and physical properties, only few anion order-disorder transitions are known. Here, we show that Sr2CuO2Cl2-type layered perovskite Sr2LiHOCl2 exhibits a pressure-induced H-/O2- order-disorder transition. When synthesized at ambient and low pressures (≤2 GPa), Sr2LiHOCl2 is isostructural to orthorhombic Eu2LiHOCl2 (Cmcm) with a H-/O2- order at the equatorial sites. However, applying a higher pressure (5 GPa) during synthesis causes the equatorial anions to be disordered, leading to a tetragonal symmetry (I4/mmm) with a loss of the superstructure. The structural analysis revealed that, in the ambient pressure phase, HLi2Sr4 and OLi2Sr4 octahedra have distinct sizes to stabilize otherwise underbonded oxide ions, which is less important at the higher pressure. Anion-disordered Sr2LiHOBr2 and Ba2LiHOCl2 were also obtained at 5 GPa. Given the abundant layer-type anion order in perovskite-based oxyhydrides (e.g., La2LiHO3), the inclusion of additional anions (e.g., chloride) expands the frontiers of anion ordering patterns and their distribution control with the benefit of improving ionic conduction in solids.

Evolutionary Algorithm Directed Synthesis of Mixed Anion Compounds LaF2 X (X=Br, I) and LaFI2.

Mixed-anion compounds have attracted growing attentions, but their synthesis is challenging, making a rational search desirable. Here, we explored LaF3 -LaX3 (X=Cl, Br, I) system using ab initio structure searches based on evolutionary algorithms, and predicted LaF2 X and LaFX2 (X=Br, I), which are respectively isostructural with LaHBr2 and YH2 I, consisting of layered La-F blocks with single and double ordered honeycomb lattices, separated by van der Waals gaps. We successfully synthesized these compounds: LaF2 Br and LaFI2 crystallize in the predicted structure, while LaF2 I is similar to the predicted one but with different layer stacking. LaF2 I exhibits fluoride ion conductivity comparable to that of non-doped LaF3 , and has the potential to show better ionic conductivity upon appropriate doping, given the theoretically lower diffusion energy barrier and the presence of soft iodine anions. This study shows the structure prediction using evolutionary algorithms will accelerate the discovery of mixed-anion compounds in future, in particular those with an ordered anion arrangement.

Structural Transformation in LnHS (Ln = La, Nd, Gd, and Er) with Coordination Change between an S-Centered Octahedron and a Trigonal Prism.

Lanthanide hydride chalcogenides LnHSe and LnHTe (Ln = lanthanides) crystallize in two polymorphs, 2H and 1H structures (ZrBeSi-type and filled-WC-type structures, respectively), but the chemical origin of the structural selection is unknown. Here, we have expanded the LnHCh (Ch = O, Se, and Te) family to include LnHS (Ln = La, Nd, Gd, and Er) using high-pressure synthesis. LnHS adopts the 2H structure for large Ln (La, Nd, and Gd) and the 1H structure for small Er. We compared the two polymorphs using anion-centered polyhedra and found that in the compounds with large ionicity, the 2H structure with ChLn6 octahedra is stabilized over the 1H structure with ChLn6 trigonal prisms due to relatively small electrostatic repulsion, supported by analysis of Madelung energy, crystal orbital Hamilton population (COHP), and density of energy (DOE).

Honeycomb-Layered Oxides With Silver Atom Bilayers and Emergence of Non-Abelian SU(2) Interactions.

Honeycomb-layered oxides with monovalent or divalent, monolayered cationic lattices generally exhibit myriad crystalline features encompassing rich electrochemistry, geometries, and disorders, which particularly places them as attractive material candidates for next-generation energy storage applications. Herein, global honeycomb-layered oxide compositions, Ag2 M2 TeO6 ( M = Ni , Mg , etc $M = \rm Ni, Mg, etc$ .) exhibiting Ag $\rm Ag$ atom bilayers with sub-valent states within Ag-rich crystalline domains of Ag6 M2 TeO6 and Ag $\rm Ag$ -deficient domains of Ag 2 - x Ni 2 TeO 6 ${\rm Ag}_{2 - x}\rm Ni_2TeO_6$ ( 0 < x < 2 $0 < x < 2$ ). The Ag $\rm Ag$ -rich material characterized by aberration-corrected transmission electron microscopy reveals local atomic structural disorders characterized by aperiodic stacking and incoherency in the bilayer arrangement of Ag $\rm Ag$ atoms. Meanwhile, the global material not only displays high ionic conductivity but also manifests oxygen-hole electrochemistry during silver-ion extraction. Within the Ag $\rm Ag$ -rich domains, the bilayered structure, argentophilic interactions therein and the expected Ag $\rm Ag$ sub-valent states ( 1 / 2 + , 2 / 3 + $1/2+, 2/3+$ , etc.) are theoretically understood via spontaneous symmetry breaking of SU(2)× U(1) gauge symmetry interactions amongst 3 degenerate mass-less chiral fermion states, justified by electron occupancy of silver 4 d z 2 $4d_{z^2}$ and 5s orbitals on a bifurcated honeycomb lattice. This implies that bilayered frameworks have research applications that go beyond the confines of energy storage.

Topochemical Synthesis of Ca3 CrN3 H Involving a Rotational Structural Transformation for Catalytic Ammonia Synthesis.

Topochemical reactions have led to great progress in the discovery of new metastable compounds with novel chemical and physical properties. With these reactions, the overall crystal structure of the host material is generally maintained. Here we report a topochemical synthesis of a hexagonal nitride hydride, h-Ca3 CrN3 H, by heating an orthorhombic nitride, o-Ca3 CrN3 , under hydrogen at 673 K, accompanied by a rotational structural transformation. The hydrogen intercalation modifies the Ca-N rock-salt-like atomic packing in o-Ca3 CrN3 to a face-sharing octahedral chain in h-Ca3 CrN3 H, mimicking a "hinged tessellation" movement. In addition, the h-Ca3 CrN3 H exhibited stable ammonia synthesis activity when used as a catalyst.

Highly Electron-Doped TaON Single-Crystal Growth by a High-Pressure Flux Method.

Transition-metal oxynitrides have a variety of functions such as visible light-responsive catalysts and dielectric materials, but acquiring single crystals necessary to understand inherent properties is difficult and is limited to relatively small sizes (<10 µm) because they easily decompose at high temperatures. Here, we have succeeded in growing platelet single crystals of TaON with a typical size of 50 × 100 × 10 µm3 under a high pressure and high temperature (6 GPa and 1400 °C) using a LiCl flux. Such a harsh condition, in contrast to powder samples synthesized under mild conditions, resulted in the introduction of a large amount of oxygen vacancies (x = 0.06 in TaO1-xN) into the crystal, providing a metallic behavior with a large anisotropy of ρc/ρab ∼ 103. Low-temperature oxygen annealing allows for a single-crystal-to-single-crystal transformation to obtain fully oxidized TaON (yellow) crystals. Needle-like crystals can be obtained when NH4Cl is used as a flux. Furthermore, black Hf2ON2 single crystals are also grown, suggesting that the high-pressure flux method is widely applicable to other transition-metal oxynitrides, with extensive carrier control.

Lone-Pair-Induced Intra- and Interlayer Polarizations in Sillén-Aurivillius Layered Perovskite Bi4NbO8Br.

Sillén-Aurivillius layered perovskite oxyhalides Bi4MO8X (M = Nb, Ta; X = Cl, Br) are of great interest because of their potential as lead-free ferroelectrics in addition to their function as visible-light-responsive photocatalysts. In this work, we revisited the crystal structure of Bi4NbO8Br (space group: P21cn), revealing that the intralayer polarization is not based on the reported NbO6 octahedral tilting but is derived from the stereochemically active Bi3+ lone pair electrons (LPEs) and the octahedral off-centering of Nb5+ cations. The revised structure (space group: Ic) has additional interlayer polarizations (calculated: 0.6 µC/cm2), in agreement with recent experiments on Bi4NbO8Br. The occurrence of polarization due to stereochemically active LPEs and Nb-site off-centering is similar to Aurivillius-type ferroelectrics (e.g., Bi2WO6), with comparable spontaneous polarizations in the in-plane direction (calculated: 43.5 µC/cm2). This, together with the out-of-plane polarization, indicates that Sillén-Aurivillius compounds have great potential as ferroelectric materials.

Polyoxocationic antimony oxide cluster with acidic protons.

The success and continued expansion of research on metal-oxo clusters owe largely to their structural richness and wide range of functions. However, while most of them known to date are negatively charged polyoxometalates, there is only a handful of cationic ones, much less functional ones. Here, we show an all-inorganic hydroxyiodide [H10.7Sb32.1O44][H2.1Sb2.1I8O6][Sb0.76I6]2·25H2O (HSbOI), forming a face-centered cubic structure with cationic Sb32O44 clusters and two types of anionic clusters in its interstitial spaces. Although it is submicrometer in size, electron diffraction tomography of HSbOI allowed the construction of the initial structural model, followed by powder Rietveld refinement to reach the final structure. The cationic cluster is characterized by the presence of acidic protons on its surface due to substantial Sb3+ deficiencies, which enables HSbOI to serve as an excellent solid acid catalyst. These results open up a frontier for the exploration and functionalization of cationic metal-oxo clusters containing heavy main group elements.

Dehydration of Electrochemically Protonated Oxide: SrCoO2 with Square Spin Tubes.

Controlling oxygen deficiencies is essential for the development of novel chemical and physical properties such as high-Tc superconductivity and low-dimensional magnetic phenomena. Among reduction methods, topochemical reactions using metal hydrides (e.g., CaH2) are known as the most powerful method to obtain highly reduced oxides including Nd0.8Sr0.2NiO2 superconductor, though there are some limitations such as competition with oxyhydrides. Here we demonstrate that electrochemical protonation combined with thermal dehydration can yield highly reduced oxides: SrCoO2.5 thin films are converted to SrCoO2 by dehydration of HSrCoO2.5 at 350 °C. SrCoO2 forms square (or four-legged) spin tubes composed of tetrahedra, in contrast to the conventional infinite-layer structure. Detailed analyses suggest the importance of the destabilization of the SrCoO2.5 precursor by electrochemical protonation that can greatly alter reaction energy landscape and its gradual dehydration (H1-xSrCoO2.5-x/2) for the SrCoO2 formation. Given the applicability of electrochemical protonation to a variety of transition metal oxides, this simple process widens possibilities to explore novel functional oxides.

Bi4AO6Cl2 (A = Ba, Sr, Ca) with Double and Triple Fluorite Layers for Visible-Light Water Splitting.

Layered oxyhalides containing double or triple fluorite layers are promising visible-light-responsive water-splitting photocatalysts with unique band structures. Herein, we report on the synthesis, structure, and photocatalytic property of Bi4BaO6Cl2 (I4/mmm) with alternating double (Bi2O2) and triple (Bi2BaO4) fluorite layers, which was extracted from the crystallographic database on the basis of Madelung potential calculations. Rietveld refinements from powder X-ray and neutron diffraction data revealed the presence of cationic disorder between Bi2O2 and Bi2BaO4 layers, leading to electrostatic stabilization. DFT calculations suggested that photogenerated electrons and holes flow through the double and triple layers, respectively, which may suppress electron-hole recombination. We expanded this double-triple system to include Bi4CaO6Cl2 and Bi4SrO6Cl2 with orthorhombic distortions and different degrees of cationic disorder, which allow band gap tuning. All the double-triple compounds Bi4AO6Cl2 showed stable water-splitting photocatalysis in the presence of a sacrificial reagent.

Mixed alkali-ion transport and storage in atomic-disordered honeycomb layered NaKNi2TeO6.

Honeycomb layered oxides constitute an emerging class of materials that show interesting physicochemical and electrochemical properties. However, the development of these materials is still limited. Here, we report the combined use of alkali atoms (Na and K) to produce a mixed-alkali honeycomb layered oxide material, namely, NaKNi2TeO6. Via transmission electron microscopy measurements, we reveal the local atomic structural disorders characterised by aperiodic stacking and incoherency in the alternating arrangement of Na and K atoms. We also investigate the possibility of mixed electrochemical transport and storage of Na+ and K+ ions in NaKNi2TeO6. In particular, we report an average discharge cell voltage of about 4 V and a specific capacity of around 80 mAh g-1 at low specific currents (i.e., < 10 mA g-1) when a NaKNi2TeO6-based positive electrode is combined with a room-temperature NaK liquid alloy negative electrode using an ionic liquid-based electrolyte solution. These results represent a step towards the use of tailored cathode active materials for "dendrite-free" electrochemical energy storage systems exploiting room-temperature liquid alkali metal alloy materials.

Enhanced Magnetic Interaction by Face-Shared Hydride Anions in 6H-BaCrO2H.

Studies on magnetic oxyhydrides have been almost limited to perovskite-based lattices with corner-sharing octahedra with a M-H-M (M: transition metal) angle of θ ∼ 180°. Using a high-pressure method, we prepared BaCrO2H with a 6H-type hexagonal perovskite structure with corner- and face-sharing octahedra, offering a unique opportunity to investigate magnetic interactions based on a θ ∼ 90° case. Neutron diffraction for BaCrO2H revealed an antiferromagnetic (AFM) order at TN ∼ 375 K, which is higher than ∼240 K in BaCrO3-xFx. The relatively high TN of BaCrO2H can be explained by the preferred occupancy of H- at the face-sharing site that provides AFM superexchange in addition to AFM direct exchange interactions. First-principles calculations on BaCrO2H in comparison with BaCrO2F and BaMnO3 further reveal that the direct Cr-Cr interaction is significantly enhanced by shortening the Cr-Cr distance due to the covalent nature of H-. This study provides a useful strategy for the extensive control of magnetic interactions by exploiting the difference in the covalency of multiple anions.

Alkali-Rich Antiperovskite M3FCh (M = Li, Na; Ch = S, Se, Te): The Role of Anions in Phase Stability and Ionic Transport.

To improve ionic conductivity, solid-state electrolytes with polarizable anions that weakly interact with mobile ions have received much attention, a recent example being lithium/sodium-rich antiperovskite M3HCh (M = Li, Na; Ch = S, Se, Te). Herein, in order to clarify the role of anions in antiperovskites, the M3FCh family, in which the polarizable H- anion at the octahedral center is replaced by the ionic F- anion, is investigated theoretically and experimentally. We unexpectedly found that the stronger attractive interaction between F- and M+ ions does not slow down the M+ ion diffusion, with the calculated energy barrier being as low as that of M3HCh. This fact suggests that the low-frequency rotational phonon modes of the octahedron of cubic M3FCh (and M3HCh) are intrinsic to facilitate the fast ionic diffusion. A systematic analysis further reveals a correlation between the tolerance factor t and the ionic transport: as t decreases within the cubic phase, the rotational mode becomes softer, resulting in the reduction of the migration energy. The cubic iodine-doped Li3FSe has a room-temperature ionic conductivity of 5 × 10-5 S/cm with a bulk activation energy of 0.18 eV.