Performance of Saccharomyces cerevisiae strains against the application of adaptive laboratory evolution strategies for butanol tolerance.

Although the industrial production of butanol has been carried out for decades by bacteria of the Clostridium species, recent studies have shown the use of the yeast Saccharomyces cerevisiae as a promising alternative. While the production of n-butanol by this yeast is still very far from its tolerability (up to 2% butanol), the improvement in the tolerance can lead to an increase in butanol production. The aim of the present work was to evaluate the adaptive capacity of the laboratory strain X2180-1B and the Brazilian ethanol-producing strain CAT-1 when submitted to two strategies of adaptive laboratory Evolution (ALE) in butanol. The strains were submitted, in parallel, to ALE with successive passages or with UV irradiation, using 1% butanol as selection pressure. Despite initially showing greater tolerance to butanol, the CAT-1 strain did not show great improvements after being submitted to ALE. Already the laboratory strain X2180-1B showed an incredible increase in butanol tolerance, starting from a condition of inability to grow in 1% butanol, to the capacity to grow in this same condition. With emphasis on the X2180_n100#28 isolated colony that presented the highest maximum specific growth rate among all isolated colonies, we believe that this colony has good potential to be used as a model yeast for understanding the mechanisms that involve tolerance to alcohols and other inhibitory compounds.

A novel insight on SARS-CoV-2 S-derived fragments in the control of the host immunity.

Despite all efforts to combat the pandemic of COVID-19, we are still living with high numbers of infected persons, an overburdened health care system, and the lack of an effective and definitive treatment. Understanding the pathophysiology of the disease is crucial for the development of new technologies and therapies for the best clinical management of patients. Since the manipulation of the whole virus requires a structure with an adequate level of biosafety, the development of alternative technologies, such as the synthesis of peptides from viral proteins, is a possible solution to circumvent this problem. In addition, the use and validation of animal models is of extreme importance to screen new drugs and to compress the organism's response to the disease. Peptides derived from recombinant S protein from SARS-CoV-2 were synthesized and validated by in silico, in vitro and in vivo methodologies. Macrophages and neutrophils were challenged with the peptides and the production of inflammatory mediators and activation profile were evaluated. These peptides were also inoculated into the swim bladder of transgenic zebrafish larvae at 6 days post fertilization (dpf) to mimic the inflammatory process triggered by the virus, which was evaluated by confocal microscopy. In addition, toxicity and oxidative stress assays were also developed. In silico and molecular dynamics assays revealed that the peptides bind to the ACE2 receptor stably and interact with receptors and adhesion molecules, such as MHC and TCR, from humans and zebrafish. Macrophages stimulated with one of the peptides showed increased production of NO, TNF-α and CXCL2. Inoculation of the peptides in zebrafish larvae triggered an inflammatory process marked by macrophage recruitment and increased mortality, as well as histopathological changes, similarly to what is observed in individuals with COVID-19. The use of peptides is a valuable alternative for the study of host immune response in the context of COVID-19. The use of zebrafish as an animal model also proved to be appropriate and effective in evaluating the inflammatory process, comparable to humans.

Evaluation of Saccharomyces cerevisiae modified via CRISPR/Cas9 as a cellulosic platform microorganism in simultaneously saccharification and fermentation processes.

The nonrenewable character and deleterious effects of fossil fuels foster the need for cleaner and more inexhaustible energy sources, such as bioethanol. Especially from lignocellulosic biomasses. However, the economic viability of this product in the market depends on process optimization and cost reduction. This research applied a sequential experimental project to investigate the process of enzymatic saccharification and simultaneous fermentation to produce ethanol with sugarcane bagasse. The differential of the work was the application of the strain of Saccharomyces cerevisiae AGY001 which was improved by evolutionary engineering to become thermotolerant and by a heterologous expression based on genomic integration by CRISPR/Cas9 to produce endoglucanase and ß-glucosidase (AsENDO-AsBGL). The maximum ethanol yield found was 89% of the maximum theoretical yield (released sugars), obtained at temperature concentrations, sugarcane bagasse and inoculum at 40 °C, 16.5%, and 4.0 g/L, respectively (12.5 FPU/g bagasse). The mathematical model obtained can predict approximately 83% of the data set with 95% confidence. Therefore, these findings demonstrated the potential of sugarcane bagasse and S. cerevisiae AGY001 strain (CRISPR/Cas9 modified) in bioethanol production without the need for impractical selection media on an industrial scale, in addition to providing useful insights for the development of SSF processes.

Genetic mapping of a bioethanol yeast strain reveals new targets for hydroxymethylfurfural- and thermotolerance.

Current technology that enables bioethanol production from agricultural biomass imposes harsh conditions for Saccharomyces cerevisiae's metabolism. In this work, the genetic architecture of industrial bioethanol yeast strain SA-1 was evaluated. SA-1 segregant FMY097 was previously described as highly aldehyde resistant and here also as thermotolerant: two important traits for the second-generation industry. A Quantitative Trait Loci (QTL) mapping of 5-hydroxymethylfurfural (HMF) -resistant segregants of hybrid FMY097/BY4742 disclosed a region in chromosome II bearing alleles with uncommon non-synonymous (NS) single nucleotide polymorphisms (SNPs) in FMY097: MIX23, PKC1, SEA4, and SRO77. Allele swap to susceptible laboratory strain BY4742 revealed that SEA4FMY097 enhances robustness towards HMF, but the industrial fitness could not be fully recovered. The genetic network arising from the causative genes in the QTL window suggests that intracellular signaling TOR (Target of Rapamycin) and CWI (Cell Wall Integrity) pathways are regulators of this phenotype in FMY097. Because the QTL mapping did not result in one major allelic contribution to the evaluated trait, a background effect in FMY097's HMF resistance is expected. Quantification of NADPH - cofactor implied in endogenous aldehyde detoxification reactions - supports the former hypothesis, given its high availability in FMY097. Regarding thermotolerance, SEA4FMY097 grants BY4742 ability to grow in temperatures as high as 38 ºC in liquid, while allele PKC1FMY097 allows growth up to 40 ºC in solid medium. Both SEA4FMY097 and PKC1FMY097 encode rare NS SNPs, not found in other > 1013S. cerevisiae. Altogether, these findings point towards crucial membrane and stress mediators for yeast robustness.

Rational engineering of industrial S. cerevisiae: towards xylitol production from sugarcane straw.

BACKGROUND: Sugarcane hemicellulosic material is a compelling source of usually neglected xylose that could figure as feedstock to produce chemical building blocks of high economic value, such as xylitol. In this context, Saccharomyces cerevisiae strains typically used in the Brazilian bioethanol industry are a robust chassis for genetic engineering, given their robustness towards harsh operational conditions and outstanding fermentation performance. Nevertheless, there are no reports on the use of these strains for xylitol production using sugarcane hydrolysate. RESULTS: Potential single-guided RNA off-targets were analyzed in two preeminent industrial strains (PE-2 and SA-1), providing a database of 5'-NGG 20 nucleotide sequences and guidelines for the fast and cost-effective CRISPR editing of such strains. After genomic integration of a NADPH-preferring xylose reductase (XR), FMYX (SA-1 hoΔ::xyl1) and CENPKX (CEN.PK-122 hoΔ::xyl1) were tested in varying cultivation conditions for xylitol productivity to infer influence of the genetic background. Near-theoretical yields were achieved for all strains; however, the industrial consistently outperformed the laboratory strain. Batch fermentation of raw sugarcane straw hydrolysate with remaining solid particles represented a challenge for xylose metabolization, and 3.65 ± 0.16 g/L xylitol titer was achieved by FMYX. Finally, quantification of NADPH - cofactor implied in XR activity - revealed that FMYX has 33% more available cofactors than CENPKX. CONCLUSIONS: Although widely used in several S. cerevisiae strains, this is the first report of CRISPR-Cas9 editing major yeast of the Brazilian bioethanol industry. Fermentative assays of xylose consumption revealed that NADPH availability is closely related to mutant strains' performance. We also pioneer the use of sugarcane straw as a substrate for xylitol production. Finally, we demonstrate how industrial background SA-1 is a compelling chassis for the second-generation industry, given its inhibitor tolerance and better redox environment that may favor production of reduced sugars.

Identification and selection of a new Saccharomyces cerevisiae strain isolated from Brazilian ethanol fermentation process for application in beer production.

The fermented beverage industry is always pursuing alternatives to make products that delight consumers with special or unique characteristics. The identification and improvement of new yeast strains emerge as an opportunity; however, wild strains usually have a limitation in maltose fermentation and/or off-flavors production. Here we report the production of a Blond-style ale beer using a bioethanol isolated strain (LBGA-287) with flavor complexity approved in sensorial panels. LBGA-287 also showed an increase in maltose consumption, growth and fermentation rates when compared to the commercial yeast. Using qPCR analysis, genes related to the (i) efficiency of fermentation (ii) production of aromas/off-flavors, and (iii) metabolization of carbohydrates were found as differentially expressed in the isolated strains when compared to industrial yeast. This suggests that LBGA-287 could have an important impact on beer production, improving brewing efficiency, quality and diversity of this beverage, and most importantly satisfying the final consumer.

QTL mapping of a Brazilian bioethanol strain links the cell wall protein-encoding gene GAS1 to low pH tolerance in S. cerevisiae.

BACKGROUND: Saccharomyces cerevisiae is largely applied in many biotechnological processes, from traditional food and beverage industries to modern biofuel and biochemicals factories. During the fermentation process, yeast cells are usually challenged in different harsh conditions, which often impact productivity. Regarding bioethanol production, cell exposure to acidic environments is related to productivity loss on both first- and second-generation ethanol. In this scenario, indigenous strains traditionally used in fermentation stand out as a source of complex genetic architecture, mainly due to their highly robust background-including low pH tolerance. RESULTS: In this work, we pioneer the use of QTL mapping to uncover the genetic basis that confers to the industrial strain Pedra-2 (PE-2) acidic tolerance during growth at low pH. First, we developed a fluorescence-based high-throughput approach to collect a large number of haploid cells using flow cytometry. Then, we were able to apply a bulk segregant analysis to solve the genetic basis of low pH resistance in PE-2, which uncovered a region in chromosome X as the major QTL associated with the evaluated phenotype. A reciprocal hemizygosity analysis revealed the allele GAS1, encoding a ß-1,3-glucanosyltransferase, as the casual variant in this region. The GAS1 sequence alignment of distinct S. cerevisiae strains pointed out a non-synonymous mutation (A631G) prevalence in wild-type isolates, which is absent in laboratory strains. We further showcase that GAS1 allele swap between PE-2 and a low pH-susceptible strain can improve cell viability on the latter of up to 12% after a sulfuric acid wash process. CONCLUSION: This work revealed GAS1 as one of the main causative genes associated with tolerance to growth at low pH in PE-2. We also showcase how GAS1PE-2 can improve acid resistance of a susceptible strain, suggesting that these findings can be a powerful foundation for the development of more robust and acid-tolerant strains. Our results collectively show the importance of tailored industrial isolated strains in discovering the genetic architecture of relevant traits and its implications over productivity.

Analysis of metabolite profiles of Saccharomyces cerevisiae strains suitable for butanol production.

Butanol has advantages over ethanol as a biofuel. Although butanol is naturally produced by some Clostridium species, clostridial fermentation has inherent characteristics that prevent its industrial application. Butanol-producing Saccharomyces cerevisiae strains may be a solution to this problem. The aim of this study was to evaluate the ability of wild-type and industrial Brazilian strains of S. cerevisiae to produce n-butanol using glycine as co-substrate and evaluate the relationship between the production of this alcohol and other metabolites in fermented broth. Of the 48 strains analyzed, 25 were able to produce n-butanol in a glycine-containing medium. Strains exhibited different profiles of n-butanol, isobutanol, ethanol, glycerol and acetic acid production. Some wild-type strains showed substantial n-butanol production capability, for instance UFMG-CM-Y267, which produced about 12.7 mg/L of butanol. Although this concentration is low, it demonstrates that wild-type S. cerevisiae can synthesize butanol, suggesting that selection and genetic modification of this microorganism could yield promising results. The findings presented here may prove useful for future studies aimed at optimizing S. cerevisiae strains for butanol production.

Lignocellulolytic characterization and comparative secretome analysis of a Trichoderma erinaceum strain isolated from decaying sugarcane straw.

The fungus Trichoderma reesei is employed in the production of most enzyme cocktails used by the lignocellulosic biofuels industry today. Despite significant improvements, the cost of the required enzyme preparations remains high, representing a major obstacle for the industrial production of these alternative fuels. In this study, a new Trichoderma erinaceum strain was isolated from decaying sugarcane straw. The enzyme cocktail secreted by the new isolate during growth in pretreated sugarcane straw-containing medium presented higher specific activities of ß-glucosidase, endoxylanase, ß-xylosidase and α-galactosidase than the cocktail of a wild T. reesei strain and yielded more glucose in the hydrolysis of pretreated sugarcane straw. A proteomic analysis of the two strains' secretomes identified a total of 86 proteins, of which 48 were exclusive to T. erinaceum, 35 were exclusive to T. reesei and only 3 were common to both strains. The secretome of T. erinaceum also displayed a higher number of carbohydrate-active enzymes than that of T. reesei (37 and 27 enzymes, respectively). Altogether, these results reveal the significant potential of the T. erinaceum species for the production of lignocellulases, both as a possible source of enzymes for the supplementation of industrial cocktails and as a candidate chassis for enzyme production.

Genome Assembly of a Highly Aldehyde-Resistant Saccharomyces cerevisiae SA1-Derived Industrial Strain.

Here, we report the genome assembly of a Saccharomyces cerevisiae SA1-derived haploid (FMY097) indigenous strain isolated from a Brazilian ethanol distillery. FMY097 was recently reported to be a highly aldehyde-resistant strain capable of producing bioethanol in the presence of up to 40 mM furfural and 80 mM 5-hydroxymethylfurfural.

G-quadruplex formation enhances splicing efficiency of PAX9 intron 1.

G-quadruplexes are secondary structures present in DNA and RNA molecules, which are formed by stacking of G-quartets (i.e., interaction of four guanines (G-tracts) bounded by Hoogsteen hydrogen bonding). Human PAX9 intron 1 has a putative G-quadruplex-forming region located near exon 1, which is present in all known sequenced placental mammals. Using circular dichroism (CD) analysis and CD melting, we showed that these sequences are able to form highly stable quadruplex structures. Due to the proximity of the quadruplex structure to exon-intron boundary, we used a validated double-reporter splicing assay and qPCR to analyze its role on splicing efficiency. The human quadruplex was shown to have a key role on splicing efficiency of PAX9 intron 1, as a mutation that abolished quadruplex formation decreased dramatically the splicing efficiency of human PAX9 intron 1. The less stable, rat quadruplex had a less efficient splicing when compared to human sequences. Additionally, the treatment with 360A, a strong ligand that stabilizes quadruplex structures, further increased splicing efficiency of human PAX9 intron 1. Altogether, these results provide evidences that G-quadruplex structures are involved in splicing efficiency of PAX9 intron 1.

Apoplastic and intracellular plant sugars regulate developmental transitions in witches' broom disease of cacao.

Witches' broom disease (WBD) of cacao differs from other typical hemibiotrophic plant diseases by its unusually long biotrophic phase. Plant carbon sources have been proposed to regulate WBD developmental transitions; however, nothing is known about their availability at the plant-fungus interface, the apoplastic fluid of cacao. Data are provided supporting a role for the dynamics of soluble carbon in the apoplastic fluid in prompting the end of the biotrophic phase of infection. Carbon depletion and the consequent fungal sensing of starvation were identified as key signalling factors at the apoplast. MpNEP2, a fungal effector of host necrosis, was found to be up-regulated in an autophagic-like response to carbon starvation in vitro. In addition, the in vivo artificial manipulation of carbon availability in the apoplastic fluid considerably modulated both its expression and plant necrosis rate. Strikingly, infected cacao tissues accumulated intracellular hexoses, and showed stunted photosynthesis and the up-regulation of senescence markers immediately prior to the transition to the necrotrophic phase. These opposite findings of carbon depletion and accumulation in different host cell compartments are discussed within the frame of WBD development. A model is suggested to explain phase transition as a synergic outcome of fungal-related factors released upon sensing of extracellular carbon starvation, and an early senescence of infected tissues probably triggered by intracellular sugar accumulation.

A potential role for an extracellular methanol oxidase secreted by Moniliophthora perniciosa in Witches' broom disease in cacao.

The hemibiotrophic basidiomycete fungus Moniliophthora perniciosa, the causal agent of Witches' broom disease (WBD) in cacao, is able to grow on methanol as the sole carbon source. In plants, one of the main sources of methanol is the pectin present in the structure of cell walls. Pectin is composed of highly methylesterified chains of galacturonic acid. The hydrolysis between the methyl radicals and galacturonic acid in esterified pectin, mediated by a pectin methylesterase (PME), releases methanol, which may be decomposed by a methanol oxidase (MOX). The analysis of the M. pernciosa genome revealed putative mox and pme genes. Real-time quantitative RT-PCR performed with RNA from mycelia grown in the presence of methanol or pectin as the sole carbon source and with RNA from infected cacao seedlings in different stages of the progression of WBD indicate that the two genes are coregulated, suggesting that the fungus may be metabolizing the methanol released from pectin. Moreover, immunolocalization of homogalacturonan, the main pectic domain that constitutes the primary cell wall matrix, shows a reduction in the level of pectin methyl esterification in infected cacao seedlings. Although MOX has been classically classified as a peroxisomal enzyme, M. perniciosa presents an extracellular methanol oxidase. Its activity was detected in the fungus culture supernatants, and mass spectrometry analysis indicated the presence of this enzyme in the fungus secretome. Because M. pernciosa possesses all genes classically related to methanol metabolism, we propose a peroxisome-independent model for the utilization of methanol by this fungus, which begins with the extracellular oxidation of methanol derived from the demethylation of pectin and finishes in the cytosol.