Mapping Heterogeneity of Pristine and Aged Li- and Na-Mnhcf Cathode by Synchrotron-Based Energy-Dependent Full Field Transmission X-ray Microscopy.

Manganese hexacyanoferrate is a promising cathode material for lithium and sodium ion batteries, however, it suffers of capacity fading during the cycling process. To access the structural and functional characteristics at the nanometer scale, fresh and cycled electrodes are extracted and investigated by transmission soft X-ray microscopy, which allows chemical characterization with spatial resolution from position-dependent x-ray spectra at the Mn L-, Fe L- and N K-edges. Furthermore, soft X-rays prove to show superior sensitivity toward Fe, compare to hard X-rays. Inhomogeneities within the samples are identified, increasing in the aged electrodes, more dramatically in the Li-ion system, which explains the poorer cycle life as Li-ion cathode material. Local spectra, revealing different oxidation states over the sample with strong correlation between the Fe L-edge, Mn L-edge, and N K-edge, imply a coupling between redox centers and an electron delocalization over the host framework.

Synchrotron radiation based operando characterization of battery materials.

Synchrotron radiation based techniques are powerful tools for battery research and allow probing a wide range of length scales, with different depth sensitivities and spatial/temporal resolutions. Operando experiments enable characterization during functioning of the cell and are thus a precious tool to elucidate the reaction mechanisms taking place. In this perspective, the current state of the art for the most relevant techniques (scattering, spectroscopy, and imaging) is discussed together with the bottlenecks to address, either specific for application in the battery field or more generic. The former includes the improvement of cell designs, multi-modal characterization and development of protocols for automated or at least semi-automated data analysis to quickly process the huge amount of data resulting from operando experiments. Given the recent evolution in these areas, accelerated progress is expected in the years to come, which should in turn foster battery performance improvements.

Continuous Carbon Channels Enable Full Na-Ion Accessibility for Superior Room-Temperature Na-S Batteries.

Porous carbon has been widely used as an efficient host to encapsulate highly active molecular sulfur (S) in Li-S and Na-S batteries. However, for these sub-nanosized pores, it is a challenge to provide fully accessible sodium ions with unobstructed channels during cycling, particularly for high sulfur content. It is well recognized that solid interphase with full coverage over the designed architectures plays critical roles in promoting rapid charge transfer and stable conversion reactions in batteries, whereas constructing a high-ionic-conductivity solid interphase in the pores is very difficult. Herein, unique continuous carbonaceous pores are tailored, which can serve as multifunctional channels to encapsulate highly active S and provide fully accessible pathways for sodium ions. Solid sodium sulfide interphase layers are also realized in the channels, showing high Na-ion conductivity toward stabilizing the redox kinetics of the S cathode during charge/discharge processes. This systematically designed carbon-hosted sulfur cathode delivers superior cycling performance (420 mAh g-1 at 2 A g-1 after 2000 cycles), high capacity retention of ≈90% over 500 cycles at current density of 0.5 A g-1 , and outstanding rate capability (470 mAh g-1 at 5 A g-1 ) for room-temperature sodium-sulfur batteries.

Local Interactions Governing the Performances of Lithium- and Manganese-Rich Cathodes.

The local structural and electronical transformations occurring along the first charge and discharge cycle of Li- and Mn-rich Li[Li0.2Ni0.16Mn0.56Co0.08]O2 cathode material have been characterized by X-ray absorption spectroscopy at several complementary edges. The irreversible spinel formation, occurring at the expenses of the cycling layered phase during the first charge, is quantified (about 10%) and spatially localized. The local strains induced by the Ni oxidation have been evaluated. They induce the formation of a low spin Mn3+ in the layered structure in parallel to the irreversible formation of the spinel phase in the particles bulk. The charge balance has been quantified for all the elements along the first charging cycle, confirming a reversible oxygen oxidation along the charge. Overall, these quantitative results provide an experimental basis for modeling aimed to control the structure and its evolution, for instance, hindering the spinel formation for the benefit of the material cycle life.

Organic Polyradicals as Redox Mediators: Effect of Intramolecular Radical Interactions on Their Efficiency.

The spin-spin interactions between unpaired electrons in organic (poly)radicals, especially nitroxides, are largely investigated and are of crucial importance for their applications in areas such as organic magnetism, molecular charge transfer, or multiple spin labeling in structural biology. Recently, 2,2,6,6-tetramethylpiperidinyloxyl and polymers functionalized with nitroxides have been described as successful redox mediators in several electrochemical applications; however, the study of spin-spin interaction effect in such an area is absent. This communication reports the preparation of a novel family of discrete polynitroxide molecules, with the same number of radical units but different arrangements to study the effect of intramolecular spin-spin interactions on their electrochemical potential and their use as oxidation redox mediators in a Li-oxygen battery. We find that the intensity of interactions, as measured by the d1/d electron paramagnetic resonance parameter, progressively lowers the reduction potential. This allows us to tune the charging potential of the battery, optimizing its energy efficiency.

Role of Manganese in Lithium- and Manganese-Rich Layered Oxides Cathodes.

Lithium-rich transition-metal-oxide cathodes are among the most promising materials for next generation lithium-ion-batteries because they operate at high voltages and deliver high capacities. However, their cycle-life remains limited, and individual roles of the transition-metals are still not fully understood. Using bulk-sensitive X-ray absorption and emission spectroscopy on Li[Li0.2Ni0.16Mn0.56Co0.08]O2, we inspect the behavior of Mn, generally considered inert upon the electrochemical process. During the first charge Mn appears to be redox-active showing a partial transformation from high-spin Mn4+ to Mn3+ in both high and low spin configurations, where the latter is expected to favor reversible cycling. The Mn redox-state with cycling continues changing in opposition to the expected charge compensation and is correlated with Ni oxidation/reduction, also spatially. The findings suggest that strain induced on the Mn-O sublattice by Ni oxidation triggers Mn reduction. These results unravel the Mn role in controlling the electrochemistry of Li-rich cathodes.

Combined Influence of Meso- and Macroporosity of Soft-Hard Templated Carbon Electrodes on the Performance of Li-O2 Cells with Different Configurations.

Li-O2 batteries can offer large discharge capacities, but this depends on the morphology of the discharged Li2O2, which in turn is strongly affected by the nanostructured carbon used as support in the air cathode. However, the relation with the textural parameters is complex. To investigate the combined effect of channels of different sizes, meso-macroporous carbons with similar mesopore volume but different pore size distribution were prepared from the polymerization of resorcinol-formaldehyde (RF) in the presence of surfactants and micro-CaCO3 particles. The carbon materials were used as active materials of air cathodes flooded by ionic liquid-based electrolytes in Li-O2 cells with two different configurations, one with a static electrolyte and the other with a stirred electrolyte, which favor a film-like and large particle deposition, respectively. The presence of large pores enhances the discharge capacity with both mechanisms. Conversely, with respect to the reversible capacity, the trend depends on the cell configuration, with macroporosity favoring better performance with static, but poorer with stirred electrolytes. However, all mesoporous carbons demonstrated larger reversible capacity than a purely macroporous electrode made of carbon black. These results indicate that in addition to pore volume, a proper arrangement of large and small pores is important for discharge capacity, while an extended interface can enhance reversibility in Li-O2 battery cathodes.

Using polyoxometalates to enhance the capacity of lithium-oxygen batteries.

The Keggin-type polyoxometalate α-SiW12O404- increases the discharge capacity and potential of lithium-oxygen batteries, by facilitating the reduction of O2 to Li2O2, as confirmed by in situ electrochemical pressure measurements and XRD. Compared to organic redox mediators, polyoxometalates have higher chemical and structural stability, which could lead to longer cycling lithium-oxygen batteries.

Spatial Distributions of Discharged Products of Lithium-Oxygen Batteries Revealed by Synchrotron X-ray Transmission Microscopy.

The discharge products of ether-based Li-O2 cells were grown directly on common carbon-coated TEM grids and observed by oxidation-state-sensitive full field transmission soft X-ray microscopy (TXM). The acquired data have permitted to quantify and localize with spatial resolution the distribution of the oxygen discharge products in these samples (i.e., lithium superoxide, peroxide, and carbonates) and appreciate several compositional, structural, and morphological aspects. Most of the peroxide particles had a toroidal shape, often with a central hole usually open on only one side, and which included significant amounts of superoxide-like phases (LiO2/Li2O2 ratio between 0.2 and 0.5). Smaller particles had smaller or no superoxide content, from which we infer that abundance of soluble LiO2 may have a role in toroid formation. Significant amount of carbonates were found irregularly distributed on the electrode surface, occasionally appearing as small particles and aggregates, and mostly coating lithium peroxide particles. This suggests the formation of a barrier that, similar to the solid electrolyte interface (SEI) critical in Li-ion batteries, requires an appropriate management for a reversible operation.

Mass-transport Control on the Discharge Mechanism in Li-O2 Batteries Using Carbon Cathodes with Varied Porosity.

By comparing carbon electrodes with varying porosity in Li-O2 cells, we show that the effect of electrolyte stirring at a given current density can result in a change from 2D to 3D growth of discharged deposits. The change of morphology is evident using electron microscopy and by analyzing electrode pore size distribution with respect to discharge capacity. As a consequence, carbon electrodes with different textural properties exhibit different capacity enhancements in stirred-electrolyte cells. We demonstrate that mass transport can directly control the discharge mechanism, similar to the electrolyte composition and current density, which have already been recognized as determining factors.

Synthesis of high quality zinc blende CdSe nanocrystals.

Highly homogeneous and luminescent CdSe colloidal nanocrystals in the less common zinc blende crystal structure have been obtained at high temperature in a noncoordinating organic solvent. The key parameter appears to be the addition of a phosphonic acid to the trioctylphosphine-selenium complex before its injection into the hot cadmium mixture, while the role of temperature is less relevant. Compared to standard (wurtzite) colloidal CdSe preparations, we find that the growth rate is considerably reduced, and the energy gap between the first two absorption bands becomes larger.