Electric pulse heating device for the analysis of solid/solid phase transformations.

Ohmic pulse heating is applied to investigate diffusion and interface controlled solid-state phase transformations. The developed device uses extensive solid-state electronics providing a high current, low voltage approach that overcomes the limitations of existing setups, most notably the use of sample geometries that allow for the reliable measurement of local temperatures and their assignment to microstructures. Power for heating is supplied by a capacitor array with adjustable voltage, and the process is controlled by microcontrollers and a solid-state relay, which allows for controlled pulses that are adjustable in microseconds. Electric currents of up to 22 kA at 90 V can be realized by the setup. Electric data are monitored and collected during the experiments, and temperature data are captured using a high-resolution infrared camera at high frame rates (1200 fps). The capabilities of the setup are demonstrated by rapid heating (106 K/s) and subsequent cooling of a brass sample. Two distinct areas of the sample are analyzed in detail, showing similar heating, but different cooling curves with rates of 104 and 102 K/s. Local microstructure analysis shows that different phase transformation mechanisms were dominant, and thus, the setup fulfills its purpose.

Combining super-resolution microscopy with neuronal network recording using magnesium fluoride thin films as cover layer for multi-electrode array technology.

We present an approach for fabrication of reproducible, chemically and mechanically robust functionalized layers based on MgF2 thin films on thin glass substrates. These show great advantages for use in super-resolution microscopy as well as for multi-electrode-array fabrication and are especially suited for combination of these techniques. The transparency of the coated substrates with the low refractive index material is adjustable by the layer thickness and can be increased above 92%. Due to the hydrophobic and lipophilic properties of the thin crystalline MgF2 layers, the temporal stable adhesion needed for fixation of thin tissue, e.g. cryogenic brain slices is given. This has been tested using localization-based super-resolution microscopy with currently highest spatial resolution in light microscopy. We demonstrated that direct stochastic optical reconstruction microscopy revealed in reliable imaging of structures of central synapses by use of double immunostaining of post- (homer1 and GluA2) and presynaptic (bassoon) marker structure in a 10 µm brain slice without additional fixing of the slices. Due to the proven additional electrical insulating effect of MgF2 layers, surfaces of multi-electrode-arrays were coated with this material and tested by voltage-current-measurements. MgF2 coated multi-electrode-arrays can be used as a functionalized microscope cover slip for combination with live-cell super-resolution microscopy.