Investigating Degradation Mechanisms in PtCo Alloy Catalysts: The Role of Co Content and a Pt-Rich Shell Using Operando High-Energy Resolution Fluorescence Detection X-ray Absorption Spectroscopy.

Low Pt-based alloy catalysts are regarded as an efficient strategy in achieving high activity for the oxygen reduction reaction (ORR) in proton-exchange membrane fuel cells (PEMFCs). However, the desired durability for the low Pt-based catalysts, such as the Pt1Co3 catalyst, has still been considered a great challenge for PEMFCs. In this study, we investigate sub-2.5 nm PtxCoy alloy catalysts with varying Co content and Pt1Co3@Pt core-shell (CS) nanostructure catalysts obtained through a simple displacement reaction. The Pt1Co3@Pt_H catalysts showed a high mass activity (MA) of 1.46 A/mgPt at 0.9 V and 14% MA loss after 10k accelerated degradation test (ADT) cycles, which suggested the improved stability compared with Pt1Co3 catalysts (52% MA loss). To clarify the degradation mechanism, operando high-energy resolution fluorescence detection X-ray absorption spectroscopy (XAS) was applied in addition to conventional advanced measurement techniques, including operando conventional XAS, to analyze the electronic state and structure changes during operation potentials. We found that introducing Co improves the catalysts' activity mainly from the strain effect, but an excessive amount of Co leads to increased Pt-oxidation, which accelerates the degradation of the catalysts. The Pt1Co3@Pt_H catalyst shows high tolerance to Pt-oxidation, benefiting both the stability and activity. Our findings demonstrate an in-depth understanding of the degradation mechanism and the importance of designing PtCo CS nanostructures with optimal Co content for enhanced performance in PEMFCs.

Improving the Cyclic Reversibility of Layered Li-Rich Cathodes by Combining Oxygen Vacancies and Surface Fluorination.

Layered-type Li-rich cathode materials have attracted significant attention for next-generation Li-ion batteries, but the advantage of their high capacity is eclipsed by their poor reversibility upon cycling. Irreversible oxygen redox activity and surface degradation have been deemed as the root cause and direct cause for their poor performance, respectively. We attempted to suppress surface degradation by inserting fluoride ions up to some depth on the surface. By fluorination with NH4HF2 after introducing a significant amount of oxygen vacancies in layered Li1.2Ni0.2Co0.2Mn0.4O2 by using CaH2 as a reducing agent, the reversible capacity reached 268 mAh/g, and the capacity retention after 100 cycles was about 99%. The scanning transmission electron microscopy-electron energy loss spectroscopy (STEM-EELS) technique revealed that, in contrast to directly fluorinated samples, our materials exhibit deeper fluorine signals besides surface signals, and hard X-ray photoelectron spectroscopy (HAXPES) patterns show ionic and covalent fluorine coordination. These results indicate that the combination of oxygen deficiency introduction and surface fluorination allows some F- ions to occupy near-surface oxygen vacancy sites rather than forming only a LiF layer on the surface, suggesting a new strategy to modify cathode materials for lithium-ion batteries.

Mechanisms of point defect formation and ionic conduction in divalent cation-doped lanthanum oxybromide: first-principles and experimental study.

The ionic conduction mechanism in M2+-doped (M: Mg, Ca, Zn, and Sr) lanthanum oxybromide (LaOBr) was investigated theoretically and experimentally. Formation energy calculations of point defects revealed that Br- ion vacancies and substitutional M2+ ions were the major point defects in M2+-doped LaOBr, while Br- ion vacancies and antisite O2- ions at Br sites were the major defect types in pure LaOBr. In the relaxed point defect models, doped Mg2+ and Zn2+ ions were displaced from the initial positions of the La3+ ions, and this was experimentally supported by crystal structural analysis. These significant atomic shifts were probably due to the strong interactions between Br- and the dopant ions. First-principles calculations and experimental analyses using X-ray photoelectron spectroscopy and X-ray absorption fine-structure spectroscopy also suggested the existence of strong interactions. The migration energy of Br- ions was calculated to be 0.53 eV, while the migration energy of O2- ions was 0.92 eV, implying that Br- ion migration via a vacancy system was more probable than O2- ion migration. The calculated association energies between MLa and VBr were 0.4-0.6 eV, suggesting that the association needed to be disrupted for Br- ion conduction. The sum of the association and migration energies was comparable to the experimental association energies of M2+-doped LaOBr.

Unique Li deposition behavior in Li3PS4 solid electrolyte observed via operando X-ray computed tomography.

The problem of lithium dendrites must be addressed for practical lithium metal all-solid-state batteries. Herein, three-dimensional morphological changes within Li3PS4 electrolyte away from the anode were observed using operando X-ray computed tomography. We revealed that the electronic conduction of decomposition and the electrolyte/void interface cause the lithium deposition within the Li3PS4.

Protection Against Absorption Passivation on Platinum by a Nitrogen-Doped Carbon Shell for Enhanced Oxygen Reduction Reaction.

In polymer electrolyte type fuel cells, the platinum-based catalysts are applied for the oxygen reduction reaction. However, the specific adsorption from the sulfo group in perfluorosulfonic acid ionomers has been considered to passivate the active sites of the platinum. Herein, we present platinum catalysts covered by an ultrathin two-dimensional nitrogen-doped carbon shell (CNx) layer to protect the platinum from the specific adsorption of perfluorosulfonic acid ionomers. Such coated catalysts were obtained by the facile polydopamine coating method, which is available to tune the thickness of the carbon shell by tuning the polymerization time. The coated catalysts that possess a CNx with a thickness of 1.5 nm demonstrated superior ORR activity and comparable oxygen diffusivity when compared to the commercial Pt/C. These results were supported by the changes in the electronic statements observed in the X-ray photoelectron spectroscopy (XPS) and CO stripping analyses. Furthermore, the oxygen coverage, CO displacement charge, and operando X-ray absorption spectroscopy (XAS) tests were employed to identify the protection effect of CNx in coated catalysts compared with the Pt/C catalysts. In summary, the CNx could not only suppress the oxide species generation but also prevent the specific adsorption of the sulfo group in the ionomer.

Stacking Order Induced Anion Redox Regulation for Layer-Structured Na0.75 Li0.2 Mn0.7 Cu0.1 O2 Cathode Materials.

Stacking order plays a key role in defining the electrochemical behavior and structural stability of layer-structured cathode materials. However, the detailed effects of stacking order on anionic redox in layer-structured cathode materials have not been investigated specifically and are still unrevealed. Herein, two layered cathodes with the same chemical formula but different stacking orders: P2-Na0.75 Li0.2 Mn0.7 Cu0.1 O2 (P2-LMC) and P3-Na0.75 Li0.2 Mn0.7 Cu0.1 O2 (P3-LMC) are compared. It is found that P3 stacking order is beneficial to improve the oxygen redox reversibility compared with P2 stacking order. By using synchrotron hard and soft X-ray absorption spectroscopies, three redox couples of Cu2+ /Cu3+ , Mn3.5+ /Mn4+ , and O2- /O- are revealed to contribute charge compensation in P3 structure simultaneously, and two redox couples of Cu2+ /Cu3+ and O2- /O- are more reversible than those in P2-LMC due to the higher electronic densities in Cu 3d and O 2p orbitals in P3-LMC. In situ X-ray diffraction reveals that P3-LMC exhibits higher structural reversibility during charge and discharge than P2-LMC, even at 5C rate. As a result, P3-LMC delivers a high reversible capacity of 190.3 mAh g-1 and capacity retention of 125.7 mAh g-1 over 100 cycles. These findings provide new insight into oxygen-redox-involved layered cathode materials for SIBs.

In Situ Formed Heterostructure Interface and Well-Tuned Electronic Structure Ensuring Long Cycle Stability for 4.9 V High-Voltage Li-Rich Layered Oxide Cathodes.

High-voltage lithium-rich manganese-based layered oxides (LMLOs) are considered as the most competitive cathode materials for next-generation high-energy-density lithium-ion batteries (LIBs). However, LMLOs still suffer from irreversible lattice oxygen release, uncontrollable interface side reactions, and surface structural degradation. Herein, we propose an integration strategy combining La/Al codoping and LixCoPO4 nanocoating to improve the electrochemical performance of LMLOs comprehensively. La/Al codoping regulates the electronic structure to enhance the redox activity of anions and cations and inhibit structural degradation. The LixCoPO4 nanocoating formed by in situ reaction with the surface residual lithium can not only promote Li-ion migration but also reduce interfacial side reactions. The induced Layered@Rocksalt@LixCoPO4 heterostructure suppresses lattice volume variation and structural degradation during cycling. Under the synergistic effect of the heterostructure interface and well-tuned electronic structure, the capacity retention rate of comodified LMLO materials reaches 80.06% after 500 cycles (2.0-4.65 V) and 75.1% after 340 cycles at 1C under a high cut-off voltage of 4.9 V.

Improvement of Visible-Light H2 Evolution Activity of Pb2 Ti2 O5.4 F1.2 Photocatalyst by Coloading of Rh and Pd Cocatalysts.

Pb2 Ti2 O5.4 F1.2 modified with various metal cocatalysts was studied as a photocatalyst for visible-light H2 evolution. Although unmodified Pb2 Ti2 O5.4 F1.2 showed negligible activity, modification of its surface with Rh led to the best observed promotional effect among the Pb2 Ti2 O5.4 F1.2 samples modified with a single metal cocatalyst. The H2 evolution activity was further enhanced by coloading with Pd; the Rh-Pd/Pb2 Ti2 O5.4 F1.2 photocatalyst showed 3.2 times greater activity than the previously reported Pt/Pb2 Ti2 O5.4 F1.2 . X-ray absorption fine-structure spectroscopy, photoelectrochemical, and transient absorption spectroscopy measurements indicated that the coloaded Rh and Pd species, which were partially alloyed on the Pb2 Ti2 O5.4 F1.2 surface, improved the electron-capturing ability, thereby explaining the high activity of the coloaded Rh-Pd/Pb2 Ti2 O5.4 F1.2 catalyst toward H2 evolution.

Rate-Determining Process at Electrode/Electrolyte Interfaces for All-Solid-State Fluoride-Ion Batteries.

Developing high-performance solid electrolytes that are operable at room temperature is one of the toughest challenges related to all-solid-state fluoride-ion batteries (FIBs). In this study, tetragonal ß-Pb0.78Sn1.22F4, a promising solid electrolyte material for mild-temperature applications, was modified through annealing under various atmospheres using thin-film models. The annealed samples exhibited preferential growth and enhanced ionic conductivities. The rate-determining factor for electrode/electrolyte interface reactions in all-solid-state FIBs was also investigated by comparing ß-Pb0.78Sn1.22F4 with representative fluoride-ion- and lithium-ion-conductive materials, namely, LaF3, CeF3, and Li7La3Zr2O12. The overall rate constant of the interfacial reaction, k0, which included both mass and charge transfers, was determined using chronoamperometric measurements and Allen-Hickling simulations. Arrhenius-type correlations between k0 and temperature indicated that activation energies calculated from k0 and ionic conductivities (σion) were highly consistent. The results indicated that the mass transfer (electrolyte-side fluoride-ion conduction) should be the rate-determining process at the electrode/electrolyte interface. ß-Pb0.78Sn1.22F4, with a large σion value, had a larger k0 value than Li7La3Zr2O12. Therefore, it is hoped that the development of high-conductivity solid electrolytes can lead to all-solid-state FIBs with superior rate capabilities similar to those of all-solid-state Li-ion batteries.

Impact of the Composition of Alcohol/Water Dispersion on the Proton Transport and Morphology of Cast Perfluorinated Sulfonic Acid Ionomer Thin Films.

The dispersion of perfluorinated sulfonic acid ionomers in catalyst inks is an important factor that controls the performance of catalyst layers in membrane electrode assemblies of polymer electrolyte fuel cells. Herein, the effects of water/alcohol compositions on the morphological properties and proton transport are examined by grazing incidence small-angle X-ray scattering, grazing incidence wide-angle X-ray scattering, and electrochemical impedance spectroscopy. The thin films cast by a high water/alcohol ratio Nafion dispersion have high proton conductivity and well-defined hydrophilic/hydrophobic phase separation, which indicates that the proton conductivity and morphology of the Nafion thin films are strongly influenced by the state of dispersion. This finding is expected to further understand the morphology and proton transport properties of Nafion thin films with different water/alcohol ratios, which has implications for the performance of the Pt/Nafion interface.

Synthesis of Sulfide Solid Electrolytes through the Liquid Phase: Optimization of the Preparation Conditions.

All-solid-state lithium batteries using inorganic sulfide solid electrolytes have good safety properties and high rate capabilities as expected for a next-generation battery. Presently, conventional preparation methods such as mechanical milling and/or solid-phase synthesis need a long time to provide a small amount of the product, and they have difficult in supplying a sufficient amount to meet the demand. Hence, liquid-phase synthesis methods have been developed for large-scale synthesis. However, the ionic conductivity of sulfide solid electrolytes prepared via liquid-phase synthesis is typically lower than that prepared via solid-phase synthesis. In this study, we have controlled three factors: (1) shaking time, (2) annealing temperature, and (3) annealing time. The factors influencing lithium ionic conductivity of Li3PS4 prepared via liquid-phase synthesis were quantitatively evaluated using high-energy X-ray diffraction (XRD) measurement coupled with pair distribution function (PDF) analysis. It was revealed from PDF analysis that the amount of Li2S that cannot be detected by Raman spectroscopy or XRD decreased the ionic conductivity. Furthermore, it was revealed that the ionic conductivity of Li3PS4 is dominated by other parameters, such as remaining solvent in the sample and high crystallinity of the sample.

Molecular Profiles of Breast Cancer in a Single Institution.

BACKGROUND/AIM: Historically, breast cancer has been treated according to an evaluation of biomarkers, such as the estrogen receptor and HER2 status. Recently, molecular profiling has been used to detect driver mutations and select anti-cancer treatment strategies. In addition to detecting pathogenic mutations, the total mutation count (tumor mutation burden) has been considered as another biomarker. MATERIALS AND METHODS: We performed molecular profiling of 143 breast cancer tissues obtained from resected tissues via surgical operation. RESULTS: Suspected germline mutations were detected in 10% of the patients with a higher somatic mutation ratio. CONCLUSION: As hypermutated breast cancers are more likely to benefit from certain anti-cancer treatment strategies, molecular profiling can be used as a biomarker.

Determining Factor on the Polarization Behavior of Magnesium Deposition for Magnesium Battery Anode.

To clarify the origin of the polarization of magnesium deposition/dissolution reactions, we combined electrochemical measurement, operando soft X-ray absorption spectroscopy (operando SXAS), Raman, and density functional theory (DFT) techniques to three different electrolytes: magnesium bis(trifluoromethanesulfonyl)amide (Mg(TFSA)2)/triglyme, magnesium borohydride (Mg(BH4)2)/tetrahydrofuran (THF), and Mg(TFSA)2/2-methyltetrahydrofuran (2-MeTHF). Cyclic voltammetry revealed that magnesium deposition/dissolution reactions occur in Mg(TFSA)2/triglyme and Mg(BH4)2/THF, while the reactions do not occur in Mg(TFSA)2/2-MeTHF. Raman spectroscopy shows that the [TFSA]- in the Mg(TFSA)2/triglyme electrolyte largely does not coordinate to the magnesium ions, while all of the [TFSA]- in Mg(TFSA)2/2-MeTHF and [BH4]- in Mg(BH4)2/THF coordinate to the magnesium ions. In operando SXAS measurements, the intermediate, such as the Mg+ ion, was not observed at potentials above the magnesium deposition potential, and the local structure distortion around the magnesium ions increases in all of the electrolytes at the magnesium electrode|electrolyte interface during the cathodic polarization. Our DFT calculation and X-ray photoelectron spectroscopy results indicate that the [TFSA]-, strongly bound to the magnesium ion in the Mg(TFSA)2/2-MeTHF electrolyte, undergoes reduction decomposition easily, instead of deposition of magnesium metal, which makes the electrolyte inactive electrochemically. In the Mg(BH4)2/THF electrolyte, because the [BH4]- coordinated to the magnesium ions is stable even under the potential of the magnesium deposition, the magnesium deposition is not inhibited by the decomposition of [BH4]-. Conversely, because [TFSA]- is weakly bound to the magnesium ion in Mg(TFSA)2/triglyme, the reduction decomposition occurs relatively slowly, which allows the magnesium deposition in the electrolyte.

Morphology Changes in Perfluorosulfonated Ionomer from Thickness and Thermal Treatment Conditions.

The morphological changes of Nafion thin films with thicknesses from 10 to 200 nm on Pt substrate with various annealing histories (unannealed to 240 °C) were systematically investigated using grazing incidence small-angle X-ray scattering (GISAXS) and grazing incidence wide-angle X-ray scattering (GIWAXS). The results revealed that the hydrophilic ionic domain and hydrophobic backbone in Nafion thin films changed significantly when the annealing treatment exceeded the cluster transition temperature, which decreased proton conductivity, due to the constrained hydrophilic/hydrophobic phase separation, and increased the crystalline-rich domain. This research contributed to the understanding of ionomer thermal stability in the catalyst layer, which is subjected to thermal annealing during the hot-pressing process.

Water Oxidation through Interfacial Electron Transfer by Visible Light Using Cobalt-Modified Rutile Titania Thin-Film Photoanode.

TiO2 is a good photoanode material for water oxidation to form O2; however, UV light (λ < 400 nm) is necessary for this system to operate. In this work, cobalt species were introduced onto a rutile TiO2 thin film grown on a fluorine-doped tin oxide (FTO) substrate for visible-light activation of TiO2 and to construct water oxidation sites. TiO2 thin films were prepared on the FTO surface by the thermohydrolysis of TiCl4, followed by annealing at 723 K in air; the loading of the cobalt species was achieved simply by immersing TiO2/FTO into an aqueous Co(NO3)2 solution at room temperature, followed by heating at 423 K in air. Physicochemical analyses revealed that the cobalt species deposited on the TiO2 film was α-Co3(OH)4(NO3)2 and that the cobalt-modified TiO2 thin-film electrode had a visible-light absorption band that extended to 700 nm due to interfacial electron transitions from the cobalt species to the conduction band of TiO2. Upon anodic polarization in the presence of visible light, the cobalt-modified TiO2 thin-film electrode generated an anodic photocurrent with an onset potential of +0.1 V vs RHE, which was consistent with that of pristine rutile TiO2. Product analysis during the controlled potential photoelectrolysis in the presence of an applied bias smaller than 1.23 V under visible light showed that water oxidation to O2 occurred on the cobalt-modified TiO2/FTO. This study demonstrates that a visible-light-driven photoelectrochemical cell for water oxidation can be constructed through the use of earth-abundant metals without the need for a complicated preparation procedure.

Operando soft X-ray absorption spectroscopic study on microporous carbon-supported sulfur cathodes.

Sulfur is a promising material for next-generation cathodes, owing to its high energy and low cost. However, sulfur cathodes have the disadvantage of serious cyclability issues due to the dissolution of polysulfides that form as intermediate products during discharge/charge cycling. Filling sulfur into the micropores of porous carbon is an effective method to suppress its dissolution. Although microporous carbon-supported sulfur cathodes show an electrochemical behavior different from that of the conventional sulfur ones, the corresponding reaction mechanism is not clearly understood. In this study, we focused on clarifying the reaction mechanism of microporous carbon-supported sulfur cathodes by operando soft X-ray absorption spectroscopy. In the microporous carbon support, sulfur was present as smaller fragments compared to conventional sulfur. During the first discharge process, the sulfur species in the microporous carbon were initially reduced to S6 2- and S2 2- and then to Li2S. The S6 2- and S2 2- species were observed first, with S2 2- being the main polysulfide species during the discharge process, while Li2S was produced in the final discharge process. The narrow pores of microporous carbon prevent the dissolution of polysulfides and influence the reaction mechanism of sulfur cathodes.

Mechanistic Insight on the Formation of GaN:ZnO Solid Solution from Zn-Ga Layered Double Hydroxide Using Urea as the Nitriding Agent.

A solid solution of GaN and ZnO (GaN:ZnO) is promising as a photocatalyst for visible-light-driven overall water splitting to produce H2. However, several obstacles still exist in the conventional preparation procedure of GaN:ZnO. For example, the atomic distributions of Zn and Ga are nonuniform in GaN:ZnO when a mixture of the metal oxides, i.e. Ga2O3 and ZnO, is used as a precursor. In addition, GaN:ZnO is generally prepared under a harmful NH3 flow for long durations at high temperatures. Here, a facile synthesis of GaN:ZnO with homogeneous atomic composition via a simple and safe procedure is reported. A layered double hydroxide (LDH) containing Zn2+ and Ga3+ was used to increase the uniformity of the atomic distributions of Zn and Ga in GaN:ZnO. We employed urea as a nitriding agent instead of gaseous NH3 to increase the safety of the reaction. Through the optimization of reaction conditions such as heat treatment temperature and content of urea, single-phase GaN:ZnO was successfully obtained. In addition, the nitridation mechanism using urea was investigated in detail. NH3 released from the thermal decomposition of urea did not directly nitride the LDH precursor. X-ray absorption and infrared  spectroscopies revealed that Zn(CN2)-like intermediate species were generated at the middle temperature range and Ga-N bonds formed at high temperature along with dissociation of CO and CO2.

Ground-State Copper(III) Stabilized by N-Confused/N-Linked Corroles: Synthesis, Characterization, and Redox Reactivity.

Stable square planar organocopper(III) complexes (CuNCC2, CuNCC4, and CuBN) supported by carbacorrole-based tetradentate macrocyclic ligands with NNNC coordination cores were synthesized, and their structures were elucidated by spectroscopic means including X-ray crystallographic analysis. On the basis of their distinct planar structures, X-ray absorption/photoelectron spectroscopic features, and temperature-independent diamagnetic nature, these organocopper complexes can be preferably considered as novel organocopper(III) species. The remarkable stability of the high-valent Cu(III) states of the complexes stems from the closed-shell electronic structure derived from the peculiar NNNC coordination of the corrole-modified frameworks, which contrasts with the redox-noninnocent radical nature of regular corrole copper(II) complexes with an NNNN core. The proposed structure was supported by DFT (B3LYP) calculations. Furthermore, a π-laminated dimer architecture linked through the inner carbons was obtained from the one-electron oxidation of CuNCC4. We envisage that the precise manipulation of the molecular orbital energies and redox profiles of these organometallic corrole complexes could eventually lead to the isolation of yet unexplored high-valent metal species and the development of their organometallic reactions.

Undoped Layered Perovskite Oxynitride Li2 LaTa2 O6 N for Photocatalytic CO2 Reduction with Visible Light.

Oxynitrides are promising visible-light-responsive photocatalysts, but their structures are almost confined with three-dimensional (3D) structures such as perovskites. A phase-pure Li2 LaTa2 O6 N with a layered perovskite structure was successfully prepared by thermal ammonolysis of a lithium-rich oxide precursor. Li2 LaTa2 O6 N exhibited high crystallinity and visible-light absorption up to 500 nm. As opposed to well-known 3D oxynitride perovskites, Li2 LaTa2 O6 N supported by a binuclear RuII complex was capable of stably and selectively converting CO2 into formate under visible light (λ>400 nm). Transient absorption spectroscopy indicated that, as compared to 3D oxynitrides, Li2 LaTa2 O6 N possesses a lower density of mid-gap states that work as recombination centers of photogenerated electron/hole pairs, but a higher density of reactive electrons, which is responsible for the higher photocatalytic performance of this layered oxynitride.

Effects of the SrTiO3 support on visible-light water oxidation with Co3O4 nanoparticles.

The photocatalytic activity of SrTiO3 modified with Co3O4 nanoparticles for water oxidation under visible light (λ > 480 nm) was investigated with respect to the physicochemical properties of the SrTiO3 support. SrTiO3 was synthesized by a polymerized complex method or a hydrothermal method, followed by calcination in air at different temperatures in order to obtain SrTiO3 particles having different sizes. Co3O4 nanoparticles, which provide both visible light absorption and water oxidation centers, were loaded on the as-prepared SrTiO3 by an impregnation method using Co(NO3)2 as the precursor, followed by heating at 423 K in air. Decreasing the SrTiO3 particle size (that is, improving the crystallinity) enhanced the photocatalytic activity by promoting the formation of Co3O4 nanoparticles that provided optimal light absorption and catalytic sites. However, Co3O4 aggregation occurred on overly large SrTiO3 particles, leading to a decrease in activity. This study demonstrates the possibility of tuning the photocatalytic activity of a Co3O4-loaded wide-gap semiconductor for visible light water oxidation through the appropriate selection of the support material.