RESUMEN
OBJECTIVES: This study aimed to propose a standardized protocol for the fabrication of three-dimensionally (3D)-printed curvature-adaptive splints (CASs) and assess the precision of CASs on dentitions with different depths of the curve of Spee (COS). METHODS: 76 lower dental resin models, each exhibiting one of the four types of COS (0-, 2-, 4-, and 6-mm deep), were selected and digitally scanned. CASs were designed, 3D printed, and grouped into C0, C2, C4, and C6, corresponding to the four types of COS depths. To assess precision, the CASs occluded with the resin model were scanned as a whole and compared with the originally designed ones. RESULTS: In terms of translational deviations observed in the CASs, the mean value of absolute sagittal deviation (0.136 mm) was significantly higher than those of vertical (0.091 mm) and transversal deviations (0.045 mm) (P < 0.01). Regarding rotational deviations of the CASs, the mean deviation in pitch (0.323°) was significantly higher than those in yaw (0.083°) and roll (0.110°) (P < 0.01). However, when comparing the accuracy of CASs across C0, C2, C4, and C6 groups, no statistically significant difference was found. Additionally, the translational deviations, rotational deviations, and RMSE of all groups were significantly lower than the clinically acceptable limits of 0.5 mm, 1°, and 0.25 mm, respectively (P < 0.01). CONCLUSIONS: The depth of the COS has no significant impact on the precision of CASs, as evidenced by the absence of statistically significant differences in translational, rotational deviations, and RMSE among all groups (C0, C2, C4, and C6). Moreover, despite relatively high deviations in the sagittal dimension and pitch, all dimensional deviations and RMSE remained statistically significantly lower than the corresponding clinically acceptable limits (CALs) in all groups. CLINICAL SIGNIFICANCE: This standardized protocol incorporating "curvature-adaptation" represents an optimized approach to fabricating diverse 3D-printed splints tailored to dentitions with different anatomical features in contemporary digital dentistry.
Asunto(s)
Modelos Dentales , Impresión Tridimensional , Humanos , Diseño Asistido por Computadora , Rotación , Diseño de Aparato OrtodóncicoRESUMEN
OBJECTIVES: The purpose of the present study was to evaluate the prevalence of somatic pain in orthodontic patients and determine whether somatic pain contributes to worsening oral health-related quality of life (OHRQoL) through the mediating effect of psychological discomfort. MATERIALS AND METHODS: Scale measurements and analyses were conducted on a cohort of 769 orthodontic outpatients, encompassing Patient Health Questionnaire-15-pain (PHQ-15-P), Hua-Xi Emotional-Distress Index (HEI), Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ), and Oral Health Impact Profile-14 (OHIP-14). RESULTS: Among the respondents, 56.3% (N = 433) reported somatic pain and 20.0% (N = 154) had mental discomfort based on PHQ-15-P and HEI scores. Patients with somatic pain symptoms had significantly higher scores of HEI and OHIP-14 (P < 0.001), and higher PHQ-15-P and HEI scores emerged as statistically significant predictors of lower OHIP-14 scores (P < 0.001). HEI scores which assessed anxiety and depression partially mediated the correlation between PHQ-15-P and OHIP-14 scores, of which anxiety accounted for 52.9% of the overall mediation effect, dominating the indirect effect. CONCLUSION: Orthodontic patients reporting somatic pains were at a significantly higher risk of worsening OHRQoL during treatment, and this adverse effect is partially mediated by anxiety and depression. CLINICAL RELEVANCE: Our findings highlight the necessity for the assessment of general health and mental well-being during orthodontic interventions. To prevent delays in treating general disorders and the potential failure of orthodontic treatments, we encourage increased attentiveness towards patients with somatic symptoms and consideration of the adverse effects of comorbid mental distress.
Asunto(s)
Salud Bucal , Calidad de Vida , Humanos , Femenino , Masculino , Encuestas y Cuestionarios , Adolescente , Prevalencia , Adulto , Comorbilidad , Distrés Psicológico , Dolor Nociceptivo/epidemiología , Dolor Nociceptivo/psicología , Dimensión del DolorRESUMEN
Objectives.The purpose of this study is to investigate the age dependence of bilateral frontal electroencephalogram (EEG) coupling characteristics, and find potential age-independent depth of anesthesia monitoring indicators for the elderlies.Approach.We recorded bilateral forehead EEG data from 41 patients (ranged in 19-82 years old), and separated into three age groups: 18-40 years (n= 12); 40-65 years (n= 14), >65 years (n= 15). All these patients underwent desflurane maintained general anesthesia (GA). We analyzed the age-related EEG spectra, phase amplitude coupling (PAC), coherence and phase lag index (PLI) of EEG data in the states of awake, GA, and recovery.Main results.The frontal alpha power shows age dependence in the state of GA maintained by desflurane. Modulation index in slow oscillation-alpha and delta-alpha bands showed age dependence and state dependence in varying degrees, the PAC pattern also became less pronounced with increasing age. In the awake state, the coherence in delta, theta and alpha frequency bands were all significantly higher in the >65 years age group than in the 18-40 years age group (p< 0.05 for three frequency bands). The coherence in alpha-band was significantly enhanced in all age groups in GA (p< 0.01) and then decreased in recovery state. Notably, the PLI in the alpha band was able to significantly distinguish the three states of awake, GA and recovery (p< 0.01) and the results of PLI in delta and theta frequency bands had similar changes to those of coherence.Significance.We found the EEG coupling and synchronization between bilateral forehead are age-dependent. The PAC, coherence and PLI portray this age-dependence. The PLI and coherence based on bilateral frontal EEG functional connectivity measures and PAC based on frontal single-channel are closely associated with anesthesia-induced unconsciousness.
Asunto(s)
Desflurano , Electroencefalografía , Humanos , Desflurano/farmacología , Adulto , Persona de Mediana Edad , Anciano , Electroencefalografía/efectos de los fármacos , Adulto Joven , Masculino , Femenino , Anciano de 80 o más Años , Adolescente , Envejecimiento/fisiología , Envejecimiento/efectos de los fármacos , Lóbulo Frontal/efectos de los fármacos , Lóbulo Frontal/fisiología , Isoflurano/análogos & derivados , Isoflurano/farmacología , Anestésicos por Inhalación/farmacología , Anestesia GeneralRESUMEN
Nonlinear optical processing of ambient natural light is highly desired for computational imaging and sensing. Strong optical nonlinear response under weak broadband incoherent light is essential for this purpose. By merging 2D transparent phototransistors (TPTs) with liquid crystal (LC) modulators, we create an optoelectronic neuron array that allows self-amplitude modulation of spatially incoherent light, achieving a large nonlinear contrast over a broad spectrum at orders-of-magnitude lower intensity than achievable in most optical nonlinear materials. We fabricated a 10,000-pixel array of optoelectronic neurons, and experimentally demonstrated an intelligent imaging system that instantly attenuates intense glares while retaining the weaker-intensity objects captured by a cellphone camera. This intelligent glare-reduction is important for various imaging applications, including autonomous driving, machine vision, and security cameras. The rapid nonlinear processing of incoherent broadband light might also find applications in optical computing, where nonlinear activation functions for ambient light conditions are highly sought.
RESUMEN
BACKGROUND & AIMS: Accumulating evidence has indicated the presence of mature microRNAs (miR) in the nucleus, but their effects on steatohepatitis remain elusive. We have previously demonstrated that the intranuclear miR-204-3p in macrophages protects against atherosclerosis, which shares multiple risk factors with metabolic dysfunction-associated steatotic liver disease (MASLD). Herein, we aimed to explore the functional significance of miR-204-3p in steatohepatitis. METHODS: miR-204-3p levels and subcellular localization were assessed in the livers and peripheral blood mononuclear cells of patients with MASLD. Wild-type mice fed high-fat or methionine- and choline-deficient diets were injected with an adeno-associated virus system containing miR-204-3p to determine the effect of miR-204-3p on steatohepatitis. Co-culture systems were applied to investigate the crosstalk between macrophages and hepatocytes or hepatic stellate cells (HSCs). Multiple high-throughput epigenomic sequencings were performed to explore miR-204-3p targets. RESULTS: miR-204-3p expression decreased in livers and macrophages in mice and patients with fatty liver. In patients with MASLD, miR-204-3p levels in peripheral blood mononuclear cells were inversely related to the severity of hepatic inflammation and damage. Macrophage-specific miR-204-3p overexpression reduced steatohepatitis in high-fat or methionine- and choline-deficient diet-fed mice. miR-204-3p-overexpressing macrophages inhibited TLR4/JNK signaling and pro-inflammatory cytokine release, thereby limiting fat deposition and inflammation in hepatocytes and fibrogenic activation in HSCs. Epigenomic profiling identified miR-204-3p as a specific regulator of ULK1 expression. ULK1 transcription and VPS34 complex activation by intranuclear miR-204-3p improved autophagic flux, promoting the anti-inflammatory effects of miR-204-3p in macrophages. CONCLUSIONS: miR-204-3p inhibits macrophage inflammation, coordinating macrophage actions on hepatocytes and HSCs to ameliorate steatohepatitis. Macrophage miR-204-3p may be a therapeutic target for MASLD. IMPACT AND IMPLICATIONS: Metabolic dysfunction-associated steatotic liver disease (MASLD) is a chronic inflammatory disease ranging from simple steatosis to steatohepatitis. However, the molecular mechanisms underlying the progression of MASLD remain incompletely understood. Here, we demonstrate that miR-204-3p levels in circulating peripheral blood mononuclear cells are negatively correlated with disease severity in patients with MASLD. Nuclear miR-204-3p activates ULK1 transcription and improves autophagic flux, limiting macrophage activation and hepatic steatosis. Our study provides a novel understanding of the mechanism of macrophage autophagy and inflammation in steatohepatitis and suggests that miR-204-3p may act as a potential therapeutic target for MASLD.
Asunto(s)
Hígado Graso , MicroARNs , Animales , Ratones , Homólogo de la Proteína 1 Relacionada con la Autofagia , Dieta Alta en Grasa/efectos adversos , Modelos Animales de Enfermedad , Hígado Graso/metabolismo , Hígado Graso/genética , Hígado Graso/etiología , Hepatocitos/metabolismo , Hígado/metabolismo , Hígado/patología , Macrófagos/metabolismo , Ratones Endogámicos C57BL , MicroARNs/genética , MicroARNs/metabolismo , Receptor Toll-Like 4/metabolismo , Receptor Toll-Like 4/genéticaRESUMEN
The sulfur reduction reaction (SRR) plays a central role in high-capacity lithium sulfur (Li-S) batteries. The SRR involves an intricate, 16-electron conversion process featuring multiple lithium polysulfide intermediates and reaction branches1-3. Establishing the complex reaction network is essential for rational tailoring of the SRR for improved Li-S batteries, but represents a daunting challenge4-6. Herein we systematically investigate the electrocatalytic SRR to decipher its network using the nitrogen, sulfur, dual-doped holey graphene framework as a model electrode to understand the role of electrocatalysts in acceleration of conversion kinetics. Combining cyclic voltammetry, in situ Raman spectroscopy and density functional theory calculations, we identify and directly profile the key intermediates (S8, Li2S8, Li2S6, Li2S4 and Li2S) at varying potentials and elucidate their conversion pathways. Li2S4 and Li2S6 were predominantly observed, in which Li2S4 represents the key electrochemical intermediate dictating the overall SRR kinetics. Li2S6, generated (consumed) through a comproportionation (disproportionation) reaction, does not directly participate in electrochemical reactions but significantly contributes to the polysulfide shuttling process. We found that the nitrogen, sulfur dual-doped holey graphene framework catalyst could help accelerate polysulfide conversion kinetics, leading to faster depletion of soluble lithium polysulfides at higher potential and hence mitigating the polysulfide shuttling effect and boosting output potential. These results highlight the electrocatalytic approach as a promising strategy for tackling the fundamental challenges regarding Li-S batteries.
RESUMEN
OBJECTIVES: To determine the optimal settings for reconstructing the buccal surfaces of different tooth types using the virtual bracket removal (VBR) technique. MATERIALS AND METHODS: Ten postbonded digital dentitions (with their original prebonded dentitions) were enrolled. The VBR protocol was carried out under five settings from three commonly used computer-aided design (CAD) systems: OrthoAnalyzer (O); Meshmixer (M); and curvature (G2), tangent (G1), and flat (G0) from Geomagic Studio. The root mean squares (RMSs) between the reconstructed and prebonded dentitions were calculated for each tooth and compared with the clinically acceptable limit (CAL) of 0.10 mm. RESULTS: The overall prevalences of RMSs below the CAL were 66.80%, 70.08%, 62.30%, 94.83%, and 56.15% under O, M, G2, G1, and G0, respectively. For the upper dentition, the mean RMSs were significantly lower than the CAL for all tooth types under G1 and upper incisors and canines under M and G2. For the lower dentition, the mean RMSs were significantly lower than the CAL for all tooth types under G1 and lower incisors and canines under M, G2, and G0 (all P < .05). Additionally, the mean RMSs of all teeth under G1 were significantly lower than those under the other settings (all P < .001). CONCLUSIONS: The optimal settings varied among different tooth types. G1 performed best for most tooth types compared to the other four settings.
Asunto(s)
Incisivo , Raíz del Diente , Diseño Asistido por ComputadoraRESUMEN
OBJECTIVES: To study whether and how the clinical experience of the operator affects the accuracy of bracket placement using guided bonding devices (GBDs) in vitro. MATERIALS AND METHODS: Five resin models were bonded virtually with brackets, and the corresponding GBDs were generated and three-dimensionally printed. Nine operators, which included three dental students, three orthodontic students, and three orthodontists, bonded the brackets on the resin models using GBDs on a dental mannequin. After being bonded with brackets, the models were scanned, and the actual and designed positions of the brackets were compared. RESULTS: There was no immediate debonding. The orthodontists spent a significantly shorter time (22.36 minutes) in bracket bonding than the dental students (24.62 minutes; P < .05). The brackets tended to deviate to the buccal side in the dental student group. Linear deviations tended to be smallest in the orthodontic student group, but no significant difference was found among operators with different clinical experience (P > .5). All linear and angular deviations in each group were under 0.5 mm and 2°, respectively. CONCLUSIONS: Clinical experience was positively related to the bonding accuracy using GBDs, especially in the buccolingual dimension. Inexperience also led to longer bonding duration. However, bonding accuracy was clinically acceptable in general.
Asunto(s)
Recubrimiento Dental Adhesivo , Soportes Ortodóncicos , Humanos , Recubrimiento Dental Adhesivo/métodos , Ortodoncistas , EstudiantesRESUMEN
BACKGROUND: Safflower (Carthamus tinctorius L.) is an oilseed crop with substantial medicinal and economic value. However, the methods for constructing safflower core germplasm resources are limited, and the molecular mechanisms of lipid biosynthesis in safflower seeds are not well understood. RESULTS: In this study, 11 oil-related quantitative traits and 50 pairs of InDel markers were used to assess the diversity of a collection of 605 safflower germplasms. The original safflower germplasm exhibited rich phenotypic diversity, with high variation for most of the phenotypic traits under investigation. Similarly, high genetic diversity was evaluated in the original germplasm, in which the mean Shannon's information index (I), observed heterozygosity (H0), and expected heterozygosity (He) were 0.553, 0.182, and 0.374, respectively. Four subgroups with strong genetic structures were identified and a core germplasm of 214 cultivars was constructed, which is well represented in the original germplasm. Meanwhile, differential expression analysis of the transcriptomes of high and low linoleic acid safflower varieties at two stages of seed development identified a total of 47 genes associated with lipid biosynthesis. High expression of the genes KAS II and SAD enhanced the synthesis and accumulation of oleic acid, while FAD genes like FAD2 (Chr8G0104100), FAD3, FAD7 and FAD8 promoted the consumption of oleic acid conversion. The coordinated regulation of these multiple genes ensures the high accumulation of oleic acid in safflower seed oil. CONCLUSIONS: Based on these findings, a core germplasm of 214 cultivars was constructed and 47 candidate genes related to unsaturated fatty acid biosynthesis and lipid accumulation were identified. These results not only provide guidance for further studies to elucidate the molecular basis of oil lipid accumulation in safflower seeds, but also contribute to safflower cultivar improvements.
Asunto(s)
Carthamus tinctorius , Carthamus tinctorius/genética , Ácido Oléico , Fenotipo , Semillas/genética , Semillas/química , Ácido LinoleicoRESUMEN
OBJECTIVES: Abnormal mechanical stress is the pivotal risk factor of temporomandibular joint osteoarthritis (TMJOA). This study investigated the pathogenic mechanism by which abnormal mechanical stress induced chondrocyte senescence. MATERIALS AND METHODS: Cellular senescence was investigated in the rodent model of unilateral anterior crossbite and in the chondrocytes subjected to mechanical overloading in vitro. The effects of Yes-associated protein (YAP) in chondrocyte senescence and its correlation with methyltransferase-like 3 (METTL3) and N6 -methyladenosine (m6 A) modification were evaluated. The role of m6 A modification in chondrocyte senescence was determined. The therapeutic effects of m6 A inhibition in TMJOA were investigated. RESULTS: Senescent chondrocytes were accumulated in the mechanically induced TMJOA lesions in rats and mechanical overloading could trigger chondrocyte senescence in vitro. This mechanical stress-induced cellular senescence was revealed to be mediated by YAP deficiency that promoted METTL3-dependent m6 A modification. Moreover, inhibition of m6 A modification rescued chondrocyte senescence in vitro and in vivo, and suppressed TMJOA progression in rats. CONCLUSIONS: This study uncovered the underlying mechanism of mechanically induced senescence in TMJOA from the perspective of epitranscriptomics and revealed the therapeutic potential of m6 A inhibition in TMJOA.
RESUMEN
Safflower (Carthamus tinctorius) is widely cultivated around the world for its seeds and flowers. The presence of linoleic acid (LA) in its seeds and hydroxysafflor yellow A (HSYA) in its flowers are the crucial traits that enable safflower to be used for industrial and medicinal purposes. Understanding the genetic control of these traits is essential for optimizing the quality of safflower and its breeding. To further this research, we present a chromosome-scale assembly of the genome of the safflower variety 'Chuanhonghua 1', which was achieved using an integrated strategy combining Illumina, Oxford Nanopore, and Hi-C sequencing. We obtained a 1.17-Gb assembly with a contig N50 of 1.08 Mb, and all assembled sequences were assigned to 12 pseudochromosomes. Safflower's evolution involved the core eudicot γ-triplication event and a whole-genome duplication event, which led to large-scale genomic rearrangements. Extensive genomic shuffling has occurred since the divergence of the ancestor of dicotyledons. We conducted metabolite and transcriptome profiles with time- and part-dependent changes and screened candidate genes that significantly contribute to seed lipid biosynthesis. We also analyzed key gene families that participate in LA and HSYA biosynthesis. Additionally, we re-sequenced 220 safflower lines and carried out a genome-wide association study using high-quality SNP data for eight agronomic traits. We identified SNPs related to important traits in safflower. Besides, the candidate gene HH_034464 (CtCGT1) was shown to be involved in the biosynthesis of HSYA. Overall, we provide a high-quality reference genome and elucidate the genetic basis of LA and HSYA biosynthesis in safflower. This vast amount of data will benefit further research for functional gene mining and breeding in safflower.
RESUMEN
BACKGROUND/AIM: Recent studies have demonstrated the crucial regulatory roles of circular RNAs (circRNAs) in cancer initiation and progression. The sponge mechanism of circRNAs has been shown to be widely active in various types of tumors. However, many circRNAs still have not been verified to function through this mechanism. This study aimed to investigate the regulatory mechanism of hsa_circ_0079557 in colorectal cancer (CRC) and its role in CRC progression. MATERIALS AND METHODS: Raw gene expression profile datasets were downloaded from Gene Expression Omnibus (GEO) and combined to form a new dataset. Hsa_circ_0079557 was found to be highly expressed in CRC. Its role was evaluated in vitro and in vivo through a series of experiments, including quantitative real-time polymerase chain reaction (qRT-PCR), flow cytometry, colony formation, cell counting kit-8 (CCK-8), transwell assays, scratch wound healing assays, nude mice experiments, and immunohistochemistry (IHC). The association between hsa_circ_0079557 and the identified target microRNAs (miRNA) was confirmed through fluorescence in situ hybridization (FISH) and dual-luciferase reporter assays. The downstream target proteins were predicted using the web-based tool "TargetScan," and their expressions were determined using Western blot (WB). RESULTS: Hsa_circ_0079557 was found to be relatively up-regulated in CRC tissues and cell lines. Suppression of hsa_circ_0079557 expression inhibited cell proliferation in vitro and in vivo. Additionally, hsa_circ_0079557 acted as a "molecular sponge" for miR-502-5p, up-regulating the expression of Cyclin D1 (CCND1). CONCLUSION: In this study, we identify a highly expressed circRNA in CRC and propose a novel pathway of hsa_circ_0079557/miR-502-5p/CCND1 in CRC.
Asunto(s)
Neoplasias Colorrectales , MicroARNs , Humanos , Animales , Ratones , Ciclina D1 , Hibridación Fluorescente in Situ , Ratones Desnudos , ARN Circular/genética , Proliferación Celular/genética , Neoplasias Colorrectales/genética , MicroARNs/genéticaRESUMEN
The bZIP (basic leucine zipper) proteins play crucial roles in various biological functions. Nitrogen (N) is an essential element for plant growth, especially in cucumber (Cucumis sativus) due to its shallow roots. However, the regulation of bZIP genes in cucumber nitrogen metabolism has not been studied yet. In this study, we identified a total of 72 bZIP genes (CsbZIPs) in the cucumber genome that could be classified into 13 groups. These genes were unevenly distributed on seven chromosomes, and synteny analysis showed that the CsbZIP genes were expanded in a segmentally duplicating manner. Furthermore, our genome-wide expression analysis suggested that CsbZIP genes had different patterns and that five CsbZIP genes were regulated by nitrogen treatment in both leaves and roots. Consistent with CsNPF, CsbZIP55 and CsbZIP65 were regulated by nitrogen treatment in leaves and roots. Moreover, the subcellular localization showed that CsbZIP55 and CsbZIP65 were specifically located in the nucleus, and the transcriptional activation assay showed that CsbZIP55 and CsbZIP65 have transcriptional activation activity. Additionally, in the CsbZIP55 and CsbZIP65 overexpression plants, most nitrogen-regulated CsNPF genes were downregulated. Taken together, our comprehensive analysis of the bZIP gene family lays a foundation for understanding the molecular and physiological functions of CsbZIPs.
RESUMEN
OBJECTIVE: To construct a novel targeted drug delivery nanoprobe: iodine-131-arginine-glycine-aspartate-tyrosine-cysteine peptide-polyethylene glycol-fifth generation polyamide-amine-docetaxel (131I-RGDyC-PEG-PAMAM-DTX) and to investigate its physicochemical properties and biological activity. MATERIALS AND METHODS: Docetaxel was wrapped by solvent volatilization method, and the regression curve of DTX was constructed by high-performance liquid chromatography to determine its drug loading. The particle size of RGDyC-PEG-PAMAM-DTX was detected by dynamic light scattering. The 131I labeling was performed by a chloramine-T method and purified by Sephadex-G50 column chromatography, and it is in vitro stability and lipid-water partition coefficient was investigated. The cytotoxicity of RGDyC-PEG-PAMAM-DTX and 131I-RGDyC-PEG-PAMAM-DTX on A549 cells in vitro was detected by Cell Counting Kit-8 assay. RESULTS: Arginine-glycine-aspartate-tyrosine-cysteine peptide-PEG-PAMAM-DTX was successfully prepared by solvent volatilization with a loading capacity of about 44µg/mg. The average particle size of RGDyC-PEG-PAMAM-DTX was 57.8nm; the labeling rate of 131I-RGDyC-PEG-PAMAM-DTX by the chloramine-T method was 74.09%-76.09%, and the radiochemical purity was 88.9%-92.6% after purification. The in vitro stability showed that the radiochemical purity was above 80% after 72h in fetal bovine serum and PBS buffer (25oC and 37oC).CCK-8 assay showed that RGDyC-PEG-PAMAM-DTX and 131I-RGDyC-PEG-PAMAM-DTX had more pronounced cytotoxic effects than free DTX and 131I. CONCLUSION: Iodine-131-RGDyC-PEG-PAMAM-DTX has good physicochemical properties and apparent cytotoxic effectsandis expected to be used in treating tumors.
Asunto(s)
Antineoplásicos , Ácido Aspártico , Humanos , Docetaxel/uso terapéutico , Cisteína , Línea Celular Tumoral , Sistemas de Liberación de Medicamentos , Polietilenglicoles/química , Arginina , Solventes , Péptidos , Glicina , TirosinaRESUMEN
OBJECTIVE: This study evaluated the effect of offset on the precision of three-dimensional (3D)-printed splints, proposing to optimize the splint design to compensate for systematic errors. MATERIALS AND METHODS: 14 resin model sets were scanned and offset as a whole by given distances (0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, and 0.40 mm). Intermediate splints (ISs) and final splints (FSs) were generated from the non-offset and offset models and grouped correspondingly, named as splint type-offset value, IS-0.05, for instance. Dentitions occluded with the splint were scanned. Translational and rotational deviations of the lower dentition relative to the upper dentition were 3D measured. RESULTS: Deviations of ISs and FSs were more evident in the vertical and pitch dimensions, and were mostly acceptable in other dimensions. ISs with offset ≥ 0.05 mm showed vertical deviations significantly below 1 mm (P < 0.05) while ISs with 0.10- to 0.30-mm offsets had pitch rotations significantly lower than 1° (P < 0.05). The Pitch of IS-0.35 was significantly larger than ISs with 0.15- to 0.30-mm offsets (P < 0.05). Meanwhile, FSs fit better as the offset increased and FSs with offsets ≥ 0.15 mm all had deviations significantly lower than 1 mm (for translation) or 1° (for rotation) (P < 0.05). CONCLUSIONS: Offset affects the precision of 3D-printed splints. Moderate offset values of 0.10 to 0.30 mm are recommendable for ISs. Offset values ≥ 0.15 mm are recommended for FSs in cases with stable final occlusion. CLINICAL RELEVANCE: This study found the optimal offset ranges for 3D-printed ISs and FSs via a standardized protocol.
Asunto(s)
Exostosis , Procedimientos Quirúrgicos Ortognáticos , Humanos , Férulas (Fijadores) , Ferulas Oclusales , Procedimientos Quirúrgicos Ortognáticos/métodos , Oclusión Dental , Impresión Tridimensional , Diseño Asistido por ComputadoraRESUMEN
RATIONALE: Neoplasms with perivascular epithelioid cell differentiation (PEComas) are mesenchymal tumors that rarely occur in the colon. Here, we report the occurrence of a malignant PEcoma in the colon using 18F-fluorodeoxyglucose positron emission tomography/computed tomography (18F-FDG PET/CT). PATIENT CONCERNS: A 55-year-old woman was admitted to the hospital with abdominal pain for 10 days and a self-induced abdominal mass for 3 days. 18F-FDG PET/CT imaging showed a large hypermetabolic nodule and mass in the right mid-upper abdomen with heterogeneous density and a further increase in metabolism on the delayed scan. DIAGNOSES: PEComa of the colon. INTERVENTIONS: Tumor resection was performed. OUTCOMES: The patient is well after 2 months of treatment, pending further follow-up. LESSONS: Malignant perivascular epithelioid cell tumors originating in the colon are extremely rare, and our report suggests that PEComa should be considered as a differential diagnosis for 18F-FDG gastrointestinal malignancies. Additionally, 18F-FDG PET/CT may play a key role in the staging and extent of lesions in intestinal malignancies.
Asunto(s)
Neoplasias del Colon , Neoplasias de Células Epitelioides Perivasculares , Femenino , Humanos , Persona de Mediana Edad , Fluorodesoxiglucosa F18 , Tomografía Computarizada por Tomografía de Emisión de Positrones/métodos , Neoplasias de Células Epitelioides Perivasculares/diagnóstico por imagen , Neoplasias de Células Epitelioides Perivasculares/cirugía , Neoplasias de Células Epitelioides Perivasculares/patología , Neoplasias del Colon/diagnóstico por imagen , Neoplasias del Colon/cirugía , Células Epiteliales/patología , Radiofármacos , Tomografía de Emisión de PositronesRESUMEN
Bone remodeling is vital to the maintenance of bone homeostasis and may lead to destructive skeletal diseases once the balance is disrupted. Crosstalk between Wnt and estrogen receptor (ER) signaling has been proposed in bone remodeling, but the underlying mechanism remains unclear. This study was designed to explore the effect of Wnt-ER signaling during the osteogenic differentiation of bone marrow stromal cells (BMSCs). Rat BMSCs were isolated and identified using flow cytometry and stimulated with Wnt3a. Wnt3a treatment promoted osteogenic differentiation and mineralization of the BMSCs. Meanwhile, Wnt3a enhanced the expression of ERα as well as the canonical Wnt signaling mediator ß-catenin and the alternative Wnt signaling effector Yes-associated protein 1 (YAP1). Interestingly, DNA pulldown assay revealed direct binding of transcriptional enhanced associate domain 1 (TEAD1) and lymphoid enhancer binding factor 1 (LEF1), transcriptional partners of YAP1 and ß-catenin, respectively, to the promoter region of ERα. In addition, inhibition of TEAD1 and LEF1 suppressed Wnt3-promoted BMSC osteogenic differentiation and blocked Wnt3a-induced ERα expression. Furthermore, an in vivo model of femoral bone defect also supported that Wnt3a facilitated bone healing in an ERα-dependent way. Together, we suggest that Wnt3a promotes the osteogenic activity of BMSCs through YAP1 and ß-catenin-dependent activation of ERα, via direct binding of TEAD1 and LEF1 to the ERα promoter.
RESUMEN
Enantiomerically enriched sulfones occupy a prominent position in pharmaceutical chemistry and synthetic chemistry. Compared with conventional methods, a direct asymmetric sulfonylation reaction with the fixation of sulfur dioxide represents an attractive strategy for the rapid assembly of chiral sulfones with enantiopurity. In this highlight, we survey recent exciting advances in asymmetric sulfonylation by using sulfur dioxide surrogates, and discuss asymmetric induction modes, reaction mechanisms, substrate scope and opportunities for further studies.
RESUMEN
OBJECTIVES: To develop a coupled-lines system to determine the anteroposterior position of maxillary central incisors (U1) for smiling profile esthetics. MATERIALS AND METHODS: Thirty Asian females with ordinary and good facial harmony were selected as the study sample and the control sample, respectively. Three-dimensional facial images and 45°- and 90°-angled profiles were collected. The anteroposterior relationships between U1 and upper- and mid-facial soft tissue landmarks were measured. By morphing photos of the study sample, two artificial images were created to represent the well-balanced 45°- and 90°-angled profiles and were further processed with combined variations of soft tissue subnasale (SSn)-Glabella and the mid-point of facial axial points of the bilateral central incisor (mFA)-SSn distances. Esthetic assessments were performed on these images by layperson (n = 94) and orthodontist (n = 94) raters. RESULTS: Both upper- and mid-facial soft tissue landmarks were indispensable in assessing anteroposterior positions of U1 for well-balanced smiling profiles. As assessed in 45°- and 90°-angled profiles, the most esthetically sensitive parameters were mFA-Glabella and mFA-SSn distances. A coupled-lines system was constructed, comprising the Glabella and SSn vertical lines. In smiling profiles with optimal esthetics, the mFA point was at 2 to 5 mm posterior to the Glabella vertical and concomitantly 4 to 7 mm posterior to the SSn vertical, as perceived by orthodontists. Laypersons gave a wider range for mFA-Glabella distances, at 2 to 6 mm. CONCLUSIONS: The coupled-lines system could serve as a reliable reference for determining esthetically optimal anteroposterior positions of U1 for female facial profiles.