RESUMEN
OBJECTIVE: Polymerization shrinkage poses a significant challenge in dental resin composites. The objective of this study is to introduce spiroorthocarbonate monomer 3,9-dimethylene-1,3,5,7-tetraoxa-spiro[5,5]undecane (BMSOC) and epoxy resin monomer 3,4-epoxycyclohexylmethyl-3,4-epoxycyclohexane carboxylate (ECHM-ECHC) into bisphenol-S-bis(3-methacrylato-2-hydroxy propyl)ether (BisS-GMA) based resin composites to develop composites with reduced shrinkage properties. METHODS: BMSOC and BisS-GMA were synthesized and thoroughly mixed with ECHM-ECHC, followed by inorganic fillers and photoinitiators. Based on the composition of the resin matrix, five groups of experimental composites were prepared, with traditional bisphenol A-dimethacrylate glycidyl ester (Bis-GMA)/triethylene glycol dimethacrylate (TEGDMA) based composite serving as the control. The polymerization properties, including degree of conversion (DC) and polymerization shrinkage (PS), as well as marginal microleakage, wettability, flexural strength (FS), flexural modulus (FM), and biocompatibility were evaluated. RESULTS: The results demonstrated that compared with the control group, the PS of BisS-GMA based composites containing BMSOC and ECHM-ECHC were significantly reduced (P < 0.05), and the lowest PS (0.96 ± 0.08 %) was observed when the ratio of BisS-GMA: (Epoxy + BMSOC) was 4:6. Additionally, the experimental composites also exhibited improved DC, minimal microleakage, low hydrophilicity, enhanced mechanical properties, qualified in vivo biocompatibility, and slight/moderate in vitro biocompatibility. SIGNIFICANCE: The resin composites incorporating multiple modified low-shrink monomers are promising for dental applications to prevent various clinical problems caused by PS and extend restoration longevity.
Asunto(s)
Resinas Compuestas , Ensayo de Materiales , Polimerizacion , Resinas Compuestas/química , Luces de Curación Dental , Polietilenglicoles/química , Curación por Luz de Adhesivos Dentales , Ácidos Polimetacrílicos/química , Bisfenol A Glicidil Metacrilato/química , Propiedades de Superficie , Poliuretanos/química , Compuestos de Espiro/química , Metacrilatos/química , Módulo de ElasticidadRESUMEN
OBJECTIVE: Occlusal reconstruction is a critical intervention for patients with dental hard tissue defects, temporomandibular joint (TMJ) disorders, and jaw position abnormalities. Clinical efficiency and outcomes of these procedures have improved with advances in digital technologies. This case report aims to illustrate a comprehensive digital workflow for occlusal reconstruction in a patient with congenital dentition defects, emphasizing the application of digital technologies to enhance treatment outcomes. CLINICAL CONSIDERATIONS: A 28-year-old woman with previously installed porcelain-fused-to-metal bridge restorations presented with a fractured prosthesis and TMJ symptoms. A multidisciplinary approach was adopted involving the use of digital facebow, intraoral scanners, digital smile design, and CAD/CAM technologies. The process included the extraction of defective restorations, temporary restorations to refine jaw position, and final permanent restorations. The digital workflow facilitated precise diagnostics and treatment, culminating in the successful installation of permanent restorations. Regular follow-ups at one- and three-months post-treatment confirmed stable occlusal function and high patient satisfaction. CONCLUSIONS: This case report showcases the potential of multiple digital technologies to streamline complex dental treatments and achieve high-quality results. CLINICAL SIGNIFICANCE: The integration of digital technologies in occlusal reconstruction treatments offers significant benefits in terms of precision, patient comfort, and esthetic outcomes.
Asunto(s)
Flujo de Trabajo , Humanos , Femenino , Adulto , Diseño Asistido por ComputadoraRESUMEN
China's construction industry developed rapidly and safety production has become a vital issue. Improving the safety behavior of construction workers is an important measure to effectively decrease construction safety accidents. At present, a New Generation of Construction Workers (NGCWs) born after 1980 has gradually become the main force of construction companies in China and the special group characteristics coming from the intergenerational difference may make them behave differently in safety-related activities, therefore, it is very important to study how to promote their safety behavior. This paper aimed to explore the influencing mechanism of job satisfaction on the safety behavior of NGCWs and examine the mediating role of safety knowledge sharing and work engagement. Confirmatory factor analysis and structural equation modeling analysis were applied to test the theoretical model. Empirical research results indicated that job satisfaction can effectively promote safety behavior through safety knowledge sharing and work engagement. Safety knowledge sharing plays a complete mediating role between job satisfaction and safety compliance behavior, as well as between job satisfaction and safety participation behavior. Moreover, work engagement plays a complete mediating role between job satisfaction and safety participation behavior, which can provide valuable management references for China's construction companies to strengthen their safety behavior.
Asunto(s)
Industria de la Construcción , Satisfacción en el Trabajo , Conducta de Reducción del Riesgo , Seguridad , Compromiso Laboral , China , Industria de la Construcción/normas , Femenino , Humanos , Masculino , Seguridad/estadística & datos numéricos , Encuestas y CuestionariosRESUMEN
In this work, glycidyl methacrylate (GMA) was polymerised and grafted onto the surface of carbon fiber (CF) by using electrochemical grafting to improve the interfacial properties between the fibre and epoxy resin. The optimised conditions for electrochemical grafting and the reaction mechanism were also investigated. Results showed that GMA was covalently grafted to the CF surface by the assistance of aluminium chloride, which is a good electrolyte for electrochemical grafting. The GMA grafting ratio on the CF surface increased with electrolyte concentration and reaction time, and an optimal current intensity for the electropolymerisation was determined. On the basis of the strong correlation between the grafting ratio and the carboxyl content in the CF, a two-step mechanism of electrochemical grafting on the CF surface was proposed: first, the surface of CF was anodised to produce oxygen-containing functional groups, mainly including COOH, OH and C[double bond, length as m-dash]O. Next, when CF was used as the anode in the electrical grafting reaction, the COOH on the surface of CF would lose electrons and then remove carbon dioxide to generate carbon radicals on the surface of CF. The carbon radical would attack the carbon-carbon double bond in GMA to initiate the radical polymerisation of GMA monomers and graft polymers would be formed on the CF surface. Compared with untreated CF, the interfacial shear strength (IFSS) test proved the improvement of the interface adhesion of the modified carbon fibre (mCF) composites. This work provided a controllable electrochemical approach that could simply and quickly graft poly(glycidyl methacrylate) (PGMA) on the surface of CF.